Thermal stability and structural changes of double-walled carbon nanotubes by heat treatment

High-performance bifacial perovskite solar cells enabled by single-walled carbon nanotubes

Bifacial perovskite solar cells have shown great promise for increasing power output by capturing light from both sides. However, the suboptimal optical transmittance of back metal electrodes together with the complex fabrication process associated with front transparent conducting oxides have hindered the development of efficient bifacial PSCs. Here, we present a novel approach for bifacial perovskite devices using single-walled carbon nanotubes as both front and back electrodes. single-walled carbon nanotubes offer high transparency, conductivity, and stability, enabling bifacial PSCs with a bifaciality factor of over 98% and a power generation density of over 36%. We also fabricate flexible, all-carbon-electrode-based devices with a high power-per-weight value of 73.75 W g-1 and excellent mechanical durability. Furthermore, we show that our bifacial devices have a much lower material cost than conventional monofacial PSCs. Our work demonstrates the potential of SWCNT electrodes for efficient, stable, and low-cost bifacial perovskite photovoltaics.

Simultaneous Catechol and Hydroquinone Detection with Laser Fabricated MOF-Derived Cu-CuO@C Composite Electrochemical Sensor

The conversion of metal-organic frameworks (MOFs) into advanced functional materials offers a promising route for producing unique nanomaterials. MOF-derived systems have the potential to overcome the drawbacks of MOFs, such as low electrical conductivity and poor structural stability, which have hindered their real-world applications in certain cases. In this study, laser scribing was used for pyrolysis of a Cu-based MOF ([Cu4{1,4-C6H4(COO)2}3(4,4'-bipy)2]n) to synthesize a Cu-CuO@C composite on the surface of a screen-printed electrode (SPE). Scanning electron microscopy, X-ray diffractometry, and Energy-dispersive X-ray spectroscopy were used for the investigation of the morphology and composition of the fabricated electrodes. The electrochemical properties of Cu-CuO@C/SPE were studied by cyclic voltammetry and differential pulse voltammetry. The proposed flexible electrochemical Cu-CuO@C/SPE sensor for the simultaneous detection of hydroquinone and catechol exhibited good sensitivity, broad linear range (1-500 μM), and low limits of detection (0.39 μM for HQ and 0.056 μM for CT).

Development and Optimization of Water-Soluble Double-Walled Carbon Nanotubes by Effective Surface Treatment of Inner Walls

Carbon nanotubes are a significant class of nanomaterials with distinctive properties that have led to their application in a variety of fields, such as polymer composites, medicine, electronics, and material science. However, their nonpolar nature and insolubility in polar solvents limit their applications. To address this issue, highly functionalized and water-soluble double-walled carbon nanotubes (DWNTs) were developed by selectively oxidizing the inner walls of the DWNTs using oleum and nitric acid. The impact of reaction time on the chemical functionalization of DWNTs was investigated under two different reaction durations of 2 and 24 h. The presence of highly oxygenated functional groups resulted in high water solubility, which was confirmed by high- and low-frequency Raman spectroscopy, high-resolution transmission electron microscopy (TEM), scanning electron microscopy (SEM), X-ray photoelectron spectroscopy (XPS), Brunauer-Emmett-Teller (BET) method, and optical spectroscopy. The conductivity of highly water-soluble W-DWNTs (24 h) was 122.65 × 10² S cm^-1. After annealing for 12 h at 140 °C, the W-DWNTs retained 72% of their conductivity (88.79 × 10² S cm^-1).

Easy, Fast Self-Heating Polyurethane Nanocomposite with the Introduction of Thermally Annealed Carbon Nanotubes Using Near-Infrared Lased Irradiation

In this study, high-crystallinity single walled carbon nanotubes (H-SWNTs) were prepared by high-temperature thermal annealing at 1800 °C and a self-heating shape memory polyurethane nanocomposite with excellent self-heating characteristics was developed within a few seconds by irradiation with near-infrared rays. With a simple method (heat treatment), impurities at the surface of H-SWNTs were removed and at the same time the amorphous structure converted into a crystalline structure, improving crystallinity. Therefore, high conductivity (electric, thermal) and interfacial affinity with PU were increased, resulting in improved mechanical, thermal and electric properties. The electrical conductivity of neat polyurethane was enhanced from ~10^-11 S/cm to 4.72 × 10^-8 S/cm, 1.07 × 10^-6 and 4.66 × 10^-6 S/cm, while the thermal conductivity was enhanced up to 60% from 0.21 W/mK, 0.265 W/mK and 0.338 W/mK for the composites of 1, 3 and 5 wt%, respectively. Further, to achieve an effective photothermal effect, H-SWNTs were selected as nanofillers to reduce energy loss while increasing light-absorption efficiency. Thereafter, near-infrared rays of 818 nm were directly irradiated onto the nanocomposite film to induce photothermal properties arising from the local surface plasmon resonance effect on the CNT surface. A self-heating shape memory composite material that rapidly heated to 270 °C within 1 min was developed, even when only 3 wt.% of H-SWNTs were added. The results of this study can be used to guide the development of heat-generating coating materials and de-icing materials for the wing and body structures of automobiles or airplanes, depending on the molding method.

Emergence of carbon nanoscrolls from single walled carbon nanotubes: an oxidative route

Carbon nanoscrolls (CNS), a one dimensional (1D) helical form of carbon, have received enormous attention recently due to their unique structure, superior properties and potential applications. In this work, radial merging of HiPCO single walled nanotube (SWNT) bundles and emergence of CNS are reported following a reflux action involving wet oxidation, HCl washing and annealing at 900 °C. We observe macroscopic quantities of graphene sheets (GS) in the post-treated sample and beautiful manifestation of curling and folding of the GS into CNS. Here, a simple solution based oxidative route for successful merging and exfoliation of SWNT bundles and subsequent formation of CNS are demonstrated and discussed in view of Fourier transform infrared (FTIR) spectroscopy, X-ray photoelectron spectroscopy (XPS) and transmission electron microscopy (TEM) studies. Direct evidence of emergence of CNS from SWNTs via synthesis of GS through a simple oxidative method is reported for the first time.

A Meta-Analysis of Conductive and Strong Carbon Nanotube Materials

A study of 1304 data points collated over 266 papers statistically evaluates the relationships between carbon nanotube (CNT) material characteristics, including: electrical, mechanical, and thermal properties; ampacity; density; purity; microstructure alignment; molecular dimensions and graphitic perfection; and doping. Compared to conductive polymers and graphitic intercalation compounds, which have exceeded the electrical conductivity of copper, CNT materials are currently one-sixth of copper's conductivity, mechanically on-par with synthetic or carbon fibers, and exceed all the other materials in terms of a multifunctional metric. Doped, aligned few-wall CNTs (FWCNTs) are the most superior CNT category; from this, the acid-spun fiber subset are the most conductive, and the subset of fibers directly spun from floating catalyst chemical vapor deposition are strongest on a weight basis. The thermal conductivity of multiwall CNT material rivals that of FWCNT materials. Ampacity follows a diameter-dependent power-law from nanometer to millimeter scales. Undoped, aligned FWCNT material reaches the intrinsic conductivity of CNT bundles and single-crystal graphite, illustrating an intrinsic limit requiring doping for copper-level conductivities. Comparing an assembly of CNTs (forming mesoscopic bundles, then macroscopic material) to an assembly of graphene (forming single-crystal graphite crystallites, then carbon fiber), the ≈1 µm room-temperature, phonon-limited mean-free-path shared between graphene, metallic CNTs, and activated semiconducting CNTs is highlighted, deemphasizing all metallic helicities for CNT power transmission applications.

Engineering of Microcage Carbon Nanotube Architectures with Decoupled Multimodal Porosity and Amplified Catalytic Performance

New approaches for the engineering of the 3D microstructure, pore modality, and chemical functionality of hierarchically porous nanocarbon assemblies are key to develop the next generation of functional aerogel and membrane materials. Here, interfacially driven assembly of carbon nanotubes (CNT) is exploited to fabricate structurally directed aerogels with highly controlled internal architectures, composed of pseudo-monolayer, CNT microcages. CNT Pickering emulsions enable engineering at fundamentally different length scales, whereby the microporosity, mesoporosity, and macroporosity are decoupled and individually controlled through CNT type, CNT number density, and process energy, respectively. In addition, metal nanocatalysts (Cu, Pd, and Ru) are embedded within the architectures through an elegant sublimation and shock-decomposition approach; introducing the first approach that enables through-volume functionalization of intricate, pre-designed aerogels without microstructural degradation. Catalytic structure-function relationships are explored in a pharma-important amidation reaction; providing insights on how the engineered frameworks enhance catalyst activity. A sophisticated array of advanced tomographic, spectroscopic, and microscopic techniques reveal an intricate 3D assembly of CNT building-blocks and their influence on the functional properties of the enhanced nanocatalysts. These advances set a basis to modulate structure and chemistry of functional aerogel materials independently in a controlled fashion for a variety of applications, including energy conversion and storage, smart electronics, and (electro)catalysis.

Recent Developments in Carbon Nanotubes-Reinforced Ceramic Matrix Composites: A Review on Dispersion and Densification Techniques

Ceramic matrix composites (CMCs) are well-established composites applied on commercial, laboratory, and even industrial scales, including pottery for decoration, glass–ceramics-based light-emitting diodes (LEDs), commercial cooking utensils, high-temperature laboratory instruments, industrial catalytic reactors, and engine turbine blades. Despite the extensive applications of CMCs, researchers had to deal with their brittleness, low electrical conductivity, and low thermal properties. The use of carbon nanotubes (CNTs) as reinforcement is an effective and efficient method to tailor the ceramic structure at the nanoscale, which provides considerable practicability in the fabrication of highly functional CMC materials. This article provides a comprehensive review of CNTs-reinforced CMC materials (CNTs-CMCs). We critically examined the notable challenges during the synthesis of CNTs-CMCs. Five CNT dispersion processes were elucidated with a comparative study of the established research for the homogeneity distribution in the CMCs and the enhanced properties. We also discussed the effect of densification techniques on the properties of CNTs-CMCs. Additionally, we synopsized the outstanding microstructural and functional properties of CNTs in the CNTs-CMCs, namely stimulated ceramic crystallization, high thermal conductivity, bandgap reduction, and improved mechanical toughness. We also addressed the fundamental insights for the future technological maturation and advancement of CNTs-CMCs.

Toward Confined Carbyne with Tailored Properties

Confining carbyne to a space that allows for stability and controlled reactivity is a very appealing approach to have access to materials with tunable optical and electronic properties without rival. Here, we show how controlling the diameter of single-walled carbon nanotubes opens the possibility to grow a confined carbyne with a defined and tunable band gap. The metallicity of the tubes has a minimal influence on the formation of the carbyne, whereas the diameter plays a major role in the growth. It has been found that the properties of confined carbyne can be tailored independently from its length and how these are mostly determined by its interaction with the carbon nanotube. Molecular dynamics simulations have been performed to interpret these findings. Furthermore, the choice of a single-walled carbon nanotube host has been proven crucial even to synthesize an enriched carbyne with the smallest energy gap currently reported and with remarkable homogeneity.

Selecting Carbon Nanotubes with Diameters of Less than 1 nm by Laser Pulses: An Ab Initio Exploration

Despite the thermal instability of carbon nanotubes (CNTs) with diameters of less than 1 nm, first-principles simulations indicate the possibility of selecting such narrow CNTs using laser pulses. The simulations suggested the possibility of selecting CNTs narrower than 1 nm under pulsed laser irradiation with a full width at half-maximum of 10 fs, a wavelength of 800 nm, and a maximum field intensity ranging from 4.5 to 5 V/Å when the polarization vector was set perpendicular to the CNT axis. This result was common to both zigzag and armchair CNTs, suggesting that the preferential survival of narrow CNTs is independent of the chirality. The mechanisms underlying the preferential survival of narrower CNTs are discussed from analogous simulations of graphene nanoribbons under various polarization directions of the laser field, and the possibility of selecting CNTs with subnanometer diameters is evaluated on the basis of the simulation results.

Directional preparation of superhydrophobic magnetic CNF/PVA/MWCNT carbon aerogel

Carbon aerogels have attracted considerable attention in basic research and for their potential applications in many fields. Here, the fabrication of a magnetic cellulose nanofibre (CNF)/poly(vinyl alcohol) (PVA)/multiwalled carbon nanotubes (MWCNT) carbon aerogel (m-CPMCA) is reported using a simple freeze-drying followed by a carbonisation process, and direct immobilisation of Fe₃O₄ nanoparticle on the surface of aerogels. The obtained target aerogel has the characteristics of low density (0.098 g/cm³), high porosity (>90%) and 3D interpenetrating porous structures. Furthermore, m-CPMCA has a surprising compressive strength (about 0.35 MPa) which is obviously higher than many other cellulose-based carbon aerogels. After Carbonization, m-CPMCA exhibits superhydrophobicity, selective absorption for organic solvents and fire-resistance. The m-CPMCA also exhibited a magnetic response and can absorb oil on the water surface and can be actuated by a small magnet. More importantly, the m-CPMCA could be recycled many times by combustion, which showed economic significance. To sum up, the authors believe that m-CPMCA will become a very potential adsorbent for dealing with the increasingly serious problem of organic pollution.

Self-Assembled Graphene/MWCNT Bilayers as Platinum-Free Counter Electrode in Dye-Sensitized Solar Cells

We describe the preparation and properties of bilayers of graphene- and multi-walled carbon nanotubes (MWCNTs) as an alternative to conventionally used platinum-based counter electrode for dye-sensitized solar cells (DSSC). The counter electrodes were prepared by a simple and easy-to-implement double self-assembly process. The preparation allows for controlling the surface roughness of electrode in a layer-by-layer deposition. Annealing under N2 atmosphere improves the electrode's conductivity and the catalytic activity of graphene and MWCNTs to reduce the I3- species within the electrolyte of the DSSC. The performance of different counter-electrodes is compared for ZnO photoanode-based DSSCs. Bilayer electrodes show higher power conversion efficiencies than monolayer graphene electrodes or monolayer MWCNTs electrodes. The bilayer graphene (bottom)/MWCNTs (top) counter electrode-based DSSC exhibits a maximum power conversion efficiency of 4.1 % exceeding the efficiency of a reference DSSC with a thin film platinum counter electrode (efficiency of 3.4 %). In addition, the double self-assembled counter electrodes are mechanically stable, which enables their recycling for DSSCs fabrication without significant loss of the solar cell performance.

Constraint spaces in carbon materials

Nano-sized pores in carbon materials are recently known to give certain constraints to the encapsulated materials by keeping them inside, accompanied with some changes in their structure, morphology, stability, etc. Consequently, nano-sized pores endow the constrained materials with improved performances in comparison with those prepared by conventional processes. These pores may be called "constraint spaces" in carbon materials. Here, we review the experimental results related to these constraint spaces by classifying as nanochannels in carbon nanotubes, nanopores and nanochannels in various porous carbons, and the spaces created by carbon coating.

Laser fabrication of graphene-based electrothermal actuators enabling predicable deformation

Electrothermal actuators (ETAs) that can convert electric energy into mechanical works have been extensively studied for their great potential in artificial muscles and robotics. However, the production of ETAs that enable complex and predictable deformation is still challenging. In this Letter, an ETA based on reduced graphene oxide (RGO) and polyethylene (PE) bimorph is developed through a facile laser-scribing method. Since the laser-scribing technology permits flexible patterning, conductive RGO electrodes with complex circuit patterns can be readily produced on a thermally active PE film, forming an ETA capable of fast and reversible deformation. In addition, the laser-scribed ETA demonstrated orientation-defined bending performance, enabling more sophisticated deformation control. The laser scribing of graphene oxide has opened up a new way to produce ETAs towards cutting-edge applications such as soft robotics and intelligent systems.

Storage of Mechanical Energy Based on Carbon Nanotubes with High Energy Density and Power Density

Energy storage in a proper form is an important way to meet the fast increase in the demand for energy. Among the strategies for storing energy, storage of mechanical energy via suitable media is widely utilized by human beings. With a tensile strength over 100 GPa, and a Young's modulus over 1 TPa, carbon nanotubes (CNTs) are considered as one of the strongest materials ever found and exhibit overwhelming advantages for storing mechanical energy. For example, the tensile-strain energy density of CNTs is as high as 1125 Wh kg^-1 . In addition, CNTs also exhibit great potential for fabricating flywheels to store kinetic energy with both high energy density (8571 Wh kg^-1 ) and high power density (2 MW kg^-1 to 2 GW kg^-1 ). Here, an overview of some typical mechanical-energy-storage systems and materials is given. Then, theoretical and experimental studies on the mechanical properties of CNTs and CNT assemblies are introduced. Afterward, the strategies for utilizing CNTs to store mechanical energy are discussed. In addition, macroscale production of CNTs is summarized. Finally, future trends and prospects in the development of CNTs used as mechanical-energy-storage materials are presented.

Optimization of Carbon Nanotube Dispersions in Water Using Response Surface Methodology

The aim of this work was to demonstrate an optimization methodology to reliably obtain stable macrodispersions (i.e., for ≥24 h) of carbon nanotubes in water using sonication. Response surface methodology (RSM) was utilized to assess and optimize the sonication parameters for the process. The studied input parameters were (i) sonication time (duration), (ii) amplitude (of vibration), and (iii) pulse-on/off (duration) of the sonicator. The analyzed responses were mean diameter and size distribution of multiwalled carbon nanotube (MWNT) aggregates in water, which were measured by the dynamic light scattering technique. A semiempirical model was developed and statistically tested to estimate the magnitude of sonicator parameters required to obtain specified MWNT macrodispersions (i.e., aggregates' mean diameter and distribution) in water. The results showed that MWNT aggregates of 2 ± 0.5 μm can be obtained by optimizing sonicator parameters to a sonication time of 89 s, amplitude of 144 μm, and pulse-on/off cycle of 44/30 s. These process settings for 100 mg/L MWNTs in a 30 mL aliquot of deionized water would consume 863 J/mL of sonication energy. Contrary to the popular belief, "sonication time" and/or "sonication energy input" were not found to be proportional to the degree of dispersion of MWNTs in water. This might be the reason for the frequent disparity and nonreproducibility of sonication results reported in scientific literature, especially for dispersing nanomaterials in a number of different systems. The amplitude of vibration was noted to be the most sensitive parameter affecting MWNT aggregates' diameter and distribution in water. The characterization of MWNTs was performed using electron microscopy, surface area analyzer, thermogravimetric analyzer, and zeta potential analyzer. This study can be helpful in evaluating sonication dispersion of particulate matter in other incompressible fluids such as graphene dispersion in organic solvents.

Simultaneous Adsorption and Electrochemical Reduction of N-Nitrosodimethylamine Using Carbon-Ti4O7 Composite Reactive Electrochemical Membranes

This study focused on synthesis and characterization of Ti₄O₇ reactive electrochemical membranes (REMs) amended with powder-activated carbon (PAC) or multiwalled carbon nanotubes (MWCNTs). These composite REMs were evaluated for simultaneous adsorption and electrochemical reduction of N-nitrosodimethylamine (NDMA). The carbon-Ti₄O₇ composite REMs had high electrical conductivities (1832 to 2991 S m^-1), where carbon and Ti₄O₇ were in direct electrical contact. Addition of carbonaceous materials increased the residence times of NDMA in the REMs by a factor of 3.8 to 5.4 and therefore allowed for significant electrochemical NDMA reduction. The treatment of synthetic solutions containing 10 μM NDMA achieved >4-log NDMA removal in a single pass (liquid residence time of 11 to 22 s) through the PAC-REM and MWCNT-REM with the application of a -1.1 V/SHE cathodic potential, with permeate concentrations between 18 and 80 ng L^-1. The treatment of a 6.7 nM NDMA-spiked surface water sample, under similar operating conditions (liquid residence time of 22 s), achieved 92 to 97% removal with permeate concentrations between 16 and 40 ng L^-1. Density functional theory calculations determined a probable reaction mechanism for NDMA reduction, where the rate-limiting step was a direct electron transfer reaction.

Templated direct growth of ultra-thin double-walled carbon nanotubes

Double-walled carbon nanotubes (DWCNTs) combined the advantages of multi-walled (MW-) and single-walled (SW-) CNTs can be obtained by transforming the precursors (e.g. fullerene, ferrocene) into thin inner CNTs inside SWCNTs as templates. However, this method is limited since the DWCNT yield is strongly influenced by the filling efficiency (depending on the type of the filled molecules), opening and cutting the SWCNTs, and the diameter of the host SWCNTs. Therefore, it cannot be applied to all types of SWCNT templates. Here we show a universal route to synthesize ultra-thin DWCNTs via making SWCNTs stable at high temperature in vacuum. This method applies to different types of SWCNTs including metallicity-sorted ones without using any precursors since the carbon sources were from the reconstructed SWCNTs and the residue carbons. The resulting DWCNTs are with high quality and the yield of inner tubes is comparable to/higher than that of the DWCNTs made from the transformation of ferrocene/fullerene peapods.

Chirality-sorted carbon nanotube films as high capacity electrode materials

Carbon nanomaterials show great promise for a wide range of applications due to their excellent physicochemical and electrical properties. Since their discovery, the state-of-the-art has expanded the scope of their application from scientific curiosity to impactful solutions. Due to their tunability, carbon nanomaterials can be processed into a wide range of formulations and significant scope exists to couple carbon structures to electronic and electrochemical applications. In this paper, the electrochemical performance of various types of CNT films, which differ by the number of walls, diameter, chirality and surface chemistry is presented. Especially, chirality-sorted (6,5)- and (7,6)-based CNT films are shown to possess a high charge storage capacity (up to 621.91 mC cm-2), areal capacitance (262 mF cm-2), significantly increased effective surface area and advantageous charge/discharge characteristics without addition of any external species, and outperform many other high capacity materials reported in the literature. The results suggest that the control over the CNT structure can lead to the manufacture of macroscopic CNT devices precisely tailored for a wide range of applications, with the focus on energy storage devices and supercapacitors. The sorted CNT macroassemblies show great potential for energy storage technologies to come from R&D laboratories into real life.

Photonic Sorting of Aligned, Crystalline Carbon Nanotube Textiles

Floating catalyst chemical vapor deposition uniquely generates aligned carbon nanotube (CNT) textiles with individual CNT lengths magnitudes longer than competing processes, though hindered by impurities and intrinsic/extrinsic defects. We present a photonic-based post-process, particularly suited for these textiles, that selectively removes defective CNTs and other carbons not forming a threshold thermal pathway. In this method, a large diameter laser beam rasters across the surface of a partly aligned CNT textile in air, suspended from its ends. This results in brilliant, localized oxidation, where remaining material is an optically transparent film comprised of few-walled CNTs with profound and unique improvement in microstructure alignment and crystallinity. Raman spectroscopy shows substantial D peak suppression while preserving radial breathing modes. This increases the undoped, specific electrical conductivity at least an order of magnitude to beyond that of single-crystal graphite. Cryogenic conductivity measurements indicate intrinsic transport enhancement, opposed to simply removing nonconductive carbons/residual catalyst.

"The phactalysts": carbon nanotube/TiO2 composites as phototropic actuators for wireless remote triggering of chemical reactions and catalysis

A new concept of a reconfigurable smart catalyst was developed from the synergistic combination of polycarbonate/carbon nanotube bimorph photoactuators and TiO₂. The addition of TiO₂ provides the photoactuators with photocatalytic activity and superior opto-mechanical properties, making phototropic actuation fast, reversible and responsive to Vis-NIR light sources. These composites were tested in the wireless, light-driven and spatially controlled remote triggering of different chemical reactions, including local explosions and photocatalytic polymerizations. The same materials were also investigated as efficient opto-mechanical shutters for the light-selective inhibition or activation of specific reactions, such as the photo-induced degradation of organic dyes. These results suggest that the integration of photocatalysts with soft photoactuators can open intriguing opportunities for chemistry and soft robotics.

Ultra-stiff large-area carpets of carbon nanotubes

Herewith, we report the influence of post-synthesis heat treatment (≤2350 °C and plasma temperatures) on the crystal structure, defect density, purity, alignment and dispersibility of free-standing large-area (several cm(2)) carpets of ultra-long (several mm) vertically aligned multi-wall carbon nanotubes (VA-MWCNTs). VA-MWCNTs were produced in large quantities (20-30 g per batch) using a semi-scaled-up aerosol-assisted chemical vapour deposition (AACVD) setup. Electron and X-ray diffraction showed that the heat treatment at 2350 °C under inert atmosphere purifies, removes residual catalyst particles, and partially aligns adjacent single crystals (crystallites) in polycrystalline MWCNTs. The purification and improvement in the crystallites alignment within the MWCNTs resulted in reduced dispersibility of the VA-MWCNTs in liquid media. High-resolution microscopy revealed that the crystallinity is improved in scales of few tens of nanometres while the point defects remain largely unaffected. The heat treatment also had a marked benefit on the mechanical properties of the carpets. For the first time, we report compression moduli as high as 120 MPa for VA-MWCNT carpets, i.e. an order of magnitude higher than previously reported figures. The application of higher temperatures (arc-discharge plasma, ≥4000 °C) resulted in the formation of a novel graphite-matrix composite reinforced with CVD and arc-discharge-like carbon nanotubes.

Towards Carbon-Neutral CO2 Conversion to Hydrocarbons

With fossil fuels still predicted to contribute close to 80 % of the primary energy consumption by 2040, methods to limit further CO2 emissions in the atmosphere are urgently needed to avoid the catastrophic scenarios associated with global warming. In parallel with improvements in energy efficiency and CO2 storage, the conversion of CO2 has emerged as a complementary route with significant potential. In this work we present the direct thermo-catalytic conversion of CO2 to hydrocarbons using a novel iron nanoparticle-carbon nanotube (Fe@CNT) catalyst. We adopted a holistic and systematic approach to CO2 conversion by integrating process optimization-identifying reaction conditions to maximize conversion and selectivity towards long chain hydrocarbons and/or short olefins-with catalyst optimization through the addition of promoters. The result is the production of valuable hydrocarbons in a manner that can approach carbon neutrality under realistic industrial process conditions.

Double-walled carbon nanotube processing

Single-walled carbon nanotubes (SWCNTs) have been the focus of intense research, and the body of literature continues to grow exponentially, despite more than two decades having passed since the first reports. As well as extensive studies of the fundamental properties, this has seen SWCNTs used in a plethora of applications as far ranging as microelectronics, energy storage, solar cells, and sensors, to cancer treatment, drug delivery, and neuronal interfaces. On the other hand, the properties and applications of double-walled carbon nanotubes (DWCNTs) have remained relatively under-explored. This is despite DWCNTs not only sharing many of the same unique characteristics of their single-walled counterparts, but also possessing an additional suite of potentially advantageous properties arising due to the presence of the second wall and the often complex inter-wall interactions that arise. For example, it is envisaged that the outer wall can be selectively functionalized whilst still leaving the inner wall in its pristine state and available for signal transduction. A similar situation arises in DWCNT field effect transistors (FETs), where the outer wall can provide a convenient degree of chemical shielding of the inner wall from the external environment, allowing the excellent transconductance properties of the pristine nanotubes to be more fully exploited. Additionally, DWCNTs should also offer unique opportunities to further the fundamental understanding of the inter-wall interactions within and between carbon nanotubes. However, the realization of these goals has so far been limited by the same challenge experienced by the SWCNT field until recent years, namely, the inherent heterogeneity of raw, as-produced DWCNT material. As such, there is now an emerging field of research regarding DWCNT processing that focuses on the preparation of material of defined length, diameter and electronic type, and which is rapidly building upon the experience gained by the broader SWCNT community. This review describes the background of the field, summarizing some relevant theory and the available synthesis and purification routes; then provides a thorough synopsis of the current state-of-the-art in DWCNT sorting methodologies, outlines contemporary challenges in the field, and discusses the outlook for various potential applications of the resulting material.

Large-strain, multiform movements from designable electrothermal actuators based on large highly anisotropic carbon nanotube sheets

Many electroactive polymer (EAP) actuators use diverse configurations of carbon nanotubes (CNTs) as pliable electrodes to realize discontinuous, agile movements, for CNTs are conductive and flexible. However, the reported CNT-based EAP actuators could only accomplish simple, monotonous actions. Few actuators were extended to complex devices because efficiently preparing a large-area CNT electrode was difficult, and complex electrode design has not been carried out. In this work, we successfully prepared large-area CNT paper (buckypaper, BP) through an efficient approach. The BP is highly anisotropic, strong, and suitable as flexible electrodes. By means of artful graphic design and processing on BP, we fabricated various functional BP electrodes and developed a series of BP-polymer electrothermal actuators (ETAs). The prepared ETAs can realize various controllable movements, such as large-stain bending (>180°), helical curling (∼ 630°), or even bionic actuations (imitating human-hand actions). These functional and interesting movements benefit from flexible electrode design and the anisotropy of BP material. Owing to the advantages of low driving voltage (20-200 V), electrolyte-free and long service life (over 10000 times), we think the ETAs will have great potential applications in the actuator field.

Selective breakdown of metallic pathways in double-walled carbon nanotube networks

Covalently functionalized, semiconducting double-walled carbon nanotubes exhibit remarkable properties and can outperform their single-walled carbon nanotube counterparts. In order to harness their potential for electronic applications, metallic double-walled carbon nanotubes must be separated from the semiconductors. However, the inner wall is inaccessible to current separation techniques which rely on the surface properties. Here, the first approach to address this challenge through electrical breakdown of metallic double-walled carbon nanotubes, both inner and outer walls, within networks of mixed electronic types is described. The intact semiconductors demonstrate a ∼62% retention of the ON-state conductance in thin film transistors in response to covalent functionalization. The selective elimination of the metallic pathways improves the ON/OFF ratio, by more than 360 times, to as high as 40 700, while simultaneously retaining high ON-state conductance.

The buckling of single-layer MoS2 under uniaxial compression

Molecular dynamics simulations are performed to investigate the buckling of single-layer MoS2 under uniaxial compression. The strain rate is found to have an important effect on the critical buckling strain, where higher strain rate leads to larger critical strain. The critical strain is almost temperature-independent for [Formula: see text] K, and it increases with increasing temperature for [Formula: see text] K owing to the thermal vibration assisted healing mechanism on the buckling deformation. The length-dependence of the critical strain from our simulations is in good agreement with the prediction of the Euler buckling theory.

Energy-Driven Kinetic Monte Carlo Method and Its Application in Fullerene Coalescence

Mimicking the conventional barrier-based kinetic Monte Carlo simulation, an energy-driven kinetic Monte Carlo (EDKMC) method was developed to study the structural transformation of carbon nanomaterials. The new method is many orders magnitude faster than standard molecular dynamics or Monte Marlo (MC) simulations and thus allows us to explore rare events within a reasonable computational time. As an example, the temperature dependence of fullerene coalescence was studied. The simulation, for the first time, revealed that short capped single-walled carbon nanotubes (SWNTs) appear as low-energy metastable structures during the structural evolution.

Fe@CNT-monoliths for the conversion of carbon dioxide to hydrocarbons: structural characterisation and Fischer–Tropsch reactivity investigations

High carbon dioxide conversion to hydrocarbons using iron nanoparticle (Fe@CNT) catalysts supported on cordierite monoliths.

Double-wall carbon nanotube-porphyrin supramolecular hybrid: synthesis and photophysical studies

Double-wall carbon nanotubes (DWCNTs) with pyridyl units covalently attached to the external wall through isoxazolino linkers and carboxylic groups that have been esterified by pentyl chains are synthesized. The properties of these modified DWCNTs are then compared with an analogous sample based on single-wall carbon nanotubes (SWCNTs). Raman spectroscopy shows the presence of characteristic radial breathing mode vibrations, confirming that the samples partly retain the integrity of the nanotubes in the case of DWCNTs, including the internal and external nanotubes. Quantification of the pyridyl content for both samples (DWCNT and SWCNT derivatives) is based on X-ray photoelectron spectroscopy and thermogravimetric profiles, showing very similar substituent load. Both pyridyl-containing nanotubes (DWCNTs and SWCNTs) form a complex with zinc porphyrin (ZnP), as evidenced by the presence of two isosbestic points in the absorption spectra of the porphyrin upon addition of the pyridyl-functionalized nanotubes. Supramolecular complexes based on pyridyl-substituted DWCNTs and SWCNTs quench the emission and the triplet excited state identically, through an energy-transfer mechanism based on pre-assembly of the ground state. Thus, the presence of the intact inner wall in DWCNTs does not influence the quenching behavior, with respect to SWCNTs, for energy-transfer quenching with excited ZnP. These results sharply contrast with previous ones referring to electron-transfer quenching, in which the double-wall morphology of the nanotubes has been shown to considerably reduce the lifetime of charge separation, owing to faster electron mobility in DWCNTs compared to SWCNTs.

Characterization of bundled and individual triple-walled carbon nanotubes by resonant Raman spectroscopy

The optical characterization of bundled and individual triple-walled carbon nanotubes was studied for the first time in detail by using resonant Raman spectroscopy. In our approach, the outer tube of a triple-walled carbon nanotube system protects the two inner tubes (or equivalently the inner double-walled carbon nanotube) from external environment interactions making them a partially isolated system. Following the spectral changes and line-widths of the radial breathing modes and G-band by performing laser energy dependent Raman spectroscopy, it is possible to extract important information as regards to the electronic and vibrational properties, tube diameters, wall-to-wall distances, radial breathing mode, and G-band resonance evolutions as well as high-curvature intertube interactions in isolated double- and triple-walled carbon nanotube systems.

Extraordinary improvement of the graphitic structure of continuous carbon nanofibers templated with double wall carbon nanotubes

Carbon nanotubes are being widely studied as a reinforcing element in high-performance composites and fibers at high volume fractions. However, problems with nanotube processing, alignment, and non-optimal stress transfer between the nanotubes and surrounding matrix have so far prevented full utilization of their superb mechanical properties in composites. Here, we present an alternative use of carbon nanotubes, at a very small concentration, as a templating agent for the formation of graphitic structure in fibers. Continuous carbon nanofibers (CNF) were manufactured by electrospinning from polyacrylonitrile (PAN) with 1.2% of double wall nanotubes (DWNT). Nanofibers were oxidized and carbonized at temperatures from 600 °C to 1850 °C. Structural analyses revealed significant improvements in graphitic structure and crystal orientation in the templated CNFs, with the largest improvements observed at lower carbonization temperatures. In situ pull-out experiments showed good interfacial bonding between the DWNT bundles and the surrounding templated carbon matrix. Molecular Dynamics (MD) simulations of templated carbonization confirmed oriented graphitic growth and provided insight into mechanisms of carbonization initiation. The obtained results indicate that global templating of the graphitic structure in fine CNFs can be achieved at very small concentrations of well-dispersed DWNTs. The outcomes reveal a simple and inexpensive route to manufacture continuous CNFs with improved structure and properties for a variety of mechanical and functional applications. The demonstrated improvement of graphitic order at low carbonization temperatures in the absence of stretch shows potential as a promising new manufacturing technology for next generation carbon fibers.

Diameter and chiral angle distribution dependencies on the carbon precursors in surface-grown single-walled carbon nanotubes

Carbon nanotubes grown from discrete Fe-containing nanoparticles dispersed on a silicon nitride transmission electron microscope grid were systematically studied. The (n,m) indices of produced single-walled carbon nanotubes (SWNTs) were deduced from their electron diffraction patterns. Relatively small diameter SWNTs with a narrow diameter distribution (0.7-1.6 nm) were produced using CO as the carbon source at 800 °C, while large diameter SWNTs ranging from 1.0 nm to 4.7 nm were synthesized when using CH(4) as the carbon source. The chiral angle distributions of the SWNTs produced from different carbon sources are also different, which are attributed to the preferred cap nucleation associated with the carbon feed rate on the catalyst instead of carbon nanotube growth kinetics. Furthermore, growth of carbon laminar nanoclusters inside carbon nanotubes was achieved at a higher growth temperature, suggesting that dissociated carbon diffuses across the nanoparticle during the nanotube growth process.

Photochemical evidence of electronic interwall communication in double-wall carbon nanotubes

Single- and double-wall carbon nanotubes (CNTs) having dimethylanilino (DMA) units covalently attached to the external graphene wall have been prepared by the reaction of the dimethylaminophenylnitronium ion with the corresponding CNT. The samples have been characterized by Raman and XPS spectroscopies, thermogravimetry, and high-resolution transmission electron microscopy in which the integrity of the single or double wall of the CNT and the percentage of substitution (one dimethylanilino group every 45 carbons of the wall for the single- and double-wall samples) has been determined. Nanosecond laser flash photolysis has shown the generation of transients that has been derived from the charge transfer between the dimethylanilino (as the electron donor) to the CNT graphene wall (as the electron acceptor). Importantly, the lifetime of the double-wall CNT is much shorter than that monitored for the single-wall CNT. Shorter-lived transients were also observed for the pentyl-esterified functionalized double-wall CNT with respect to the single-wall analogue in the presence of hole (CH(3)OH) and electron quenchers (O(2), N(2)O), which has led to the conclusion that the inner, intact graphene wall that is present in double-wall CNT increases the charge mobility significantly, favoring charge recombination processes. Considering the importance that charge mobility has in microelectronics, our finding suggests that double-wall CNT or two-layer graphene may be more appropriate to develop devices needing fast charge mobility.

Superconductivity in bundles of double-wall carbon nanotubes

We present electrical and thermal specific heat measurements that show superconductivity in double-wall carbon nanotube (DWCNT) bundles. Clear evidence, comprising a resistance drop as a function of temperature, magnetoresistance and differential resistance signature of the supercurrent, suggest an intrinsic superconducting transition below 6.8 K for one particular sample. Additional electrical data not only confirm the existence of superconductivity, but also indicate the T_c distribution that can arise from the diversity in the diameter and chirality of the DWCNTs. A broad superconducting anomaly is observed in the specific heat of a bulk DWCNT sample, which yields a T_c distribution that correlates well with the range of the distribution obtained from the electrical data. As quasi one dimensionality of the DWCNTs dictates the existence of electronic density of state peaks, confirmation of superconductivity in this material system opens the exciting possibility of tuning the T_c through the application of a gate voltage.

Experimental-computational study of shear interactions within double-walled carbon nanotube bundles

The mechanical behavior of carbon nanotube (CNT)-based fibers and nanocomposites depends intimately on the shear interactions between adjacent tubes. We have applied an experimental-computational approach to investigate the shear interactions between adjacent CNTs within individual double-walled nanotube (DWNT) bundles. The force required to pull out an inner bundle of DWNTs from an outer shell of DWNTs was measured using in situ scanning electron microscopy methods. The normalized force per CNT-CNT interaction (1.7 ± 1.0 nN) was found to be considerably higher than molecular mechanics (MM)-based predictions for bare CNTs (0.3 nN). This MM result is similar to the force that results from exposure of newly formed CNT surfaces, indicating that the observed pullout force arises from factors beyond what arise from potential energy effects associated with bare CNTs. Through further theoretical considerations we show that the experimentally measured pullout force may include small contributions from carbonyl functional groups terminating the free ends of the CNTs, corrugation of the CNT-CNT interactions, and polygonization of the nanotubes due to their mutual interactions. In addition, surface functional groups, such as hydroxyl groups, that may exist between the nanotubes are found to play an unimportant role. All of these potential energy effects account for less than half of the ~1.7 nN force. However, partially pulled-out inner bundles are found not to pull back into the outer shell after the outer shell is broken, suggesting that dissipation is responsible for more than half of the pullout force. The sum of force contributions from potential energy and dissipation effects are found to agree with the experimental pullout force within the experimental error.

Molecular insight into the high selectivity of double-walled carbon nanotubes

Combining experimental knowledge with molecular simulations, we investigated the adsorption and separation properties of double-walled carbon nanotubes (DWNTs) against flue/synthetic gas mixture components (e.g. CO(2), CO, N(2), H(2), O(2), and CH(4)) at 300 K. Except molecular H(2), all studied nonpolar adsorbates assemble into single-file chain structures inside DWNTs at operating pressures below 1 MPa. Molecular wires of adsorbed molecules are stabilized by the strong solid-fluid potential generated from the cylindrical carbon walls. CO(2) assembly is formed at very low operating pressures in comparison to all other studied nonpolar adsorbates. The adsorption lock-and-key mechanism results from perfect fitting of rod-shaped CO(2) molecules into the cylindrical carbon pores. The enthalpy of CO(2) adsorption in DWNTs is very high and reaches 50 kJ mol(-1) at 300 K and low pore concentrations. In contrast, adsorption enthalpy at zero coverage is significantly lower for all other studied nonpolar adsorbates, for instance: 35 kJ mol(-1) for CH(4), and 14 kJ mol(-1) for H(2). Applying the ideal adsorption solution theory, we predicted that the internal pores of DWNTs have unusual ability to differentiate CO(2) molecules from other flue/synthetic gas mixture components (e.g. CO, N(2), H(2), O(2), and CH(4)) at ambient operating conditions. Computed equilibrium selectivity for equimolar CO(2)-X binary mixtures (where X: CO, N(2), H(2), O(2), and CH(4)) is very high at low mixture pressures. With an increase in binary mixture pressure, we predicted a decrease in equilibrium separation factor because of the competitive adsorption of the X binary mixture component. We showed that at 300 K and equimolar mixture pressures up to 1 MPa, the CO(2)-X equilibrium separation factor is higher than 10 for all studied binary mixtures, indicating strong preference for CO(2) adsorption. The overall selective properties of DWNTs seem to be superior, which may be beneficial for potential industrial applications of these novel carbon nanostructures.