Cyanide anion sensing mechanism of 1,3,5,7-tetratolyl aza-BODIPY: Intramolecular charge transfer and partial configuration change

Fluorescent Mechanism of a Highly Selective Probe for Copper(II) Detection: A Theoretical Study

A highly selective probe for copper(II) detection based on the dansyl group was theoretically studied by means of (time-dependent) density functional theory. The calculated results indicated that the oscillator strength of the fluorescent process for the probe molecule is considerably large, but the counterpart of its copper(II) complex is nearly zero; therefore, the predicted radiative rate k_r of the probe is several orders of magnitude larger than that of its complex; however, the predicted internal conversion rate k_ic of both the probe and its complex is of the same order of magnitude. In addition, the simulated intersystem crossing rate k_isc of the complex is much greater than that of the probe due to the effect of heavy atom from the copper atom in the complex. Based on the above information, the calculated fluorescence quantum yield of the probe is 0.16% and that of the complex becomes 10^-6%, which implies that the first excited state of the probe is bright state and that of the complex is dark state. For the complex, the hole-electron pair analysis indicates that the process of S₀ → S₁ belongs to metal-to-ligand charge transfer; its density-of-state diagram visually illustrates that the highest occupied molecular orbital (HOMO) contains the ingredient of the s orbital from the copper atom, which decreases the frontier orbital energy level and the overlap integral of HOMO and LUMO.

A DFT/TDDFT Investigation on Fluorescence and Electronic Properties of Chromone Derivatives

The development of quick and precise detection technologies for active compounds in vivo is critical for disease prevention, diagnosis and pathological investigation. The fluorescence signal of the fluorophore usually defines the probe's sensitivity to the chemical being examined. Many natural compounds containing flavone and isoflavone scaffolds exhibit a certain amount fluorescence, albeit with poor fluorescence quantum yields. Therefore, we used density functional theory (DFT) and time-dependent density functional theory (TDDFT) calculations to investigate the fluorescence characteristics of chromium-derived fluorophores in more depth. Different substituents are introduced at different positions of the chromone. As weak electron donor groups, alkyl and aromatic groups were discovered to have varying quantum yields on the fluorophore scaffold, and longer alkyl chains are favorable to enhance fluorescence quantum yield. In comparison to the amino group, substituted amino group can avoid group rotation, and the introduction of cyclic amines such as pyrrolidine and heterocyclic amines can improve optical characteristics. The electron-donating methoxy group at position 6 helps to increase the fluorescence quantum yield.

Anion Sensing by Novel Triarylboranes Containing Boraanthracene: DFT Functional Assessment, Selective Interactions, and Mechanism Demonstration

Analytical methods often involve expensive instrumentation and tedious sample pretreatment for an analyte detection. Being toxic and detrimental to human health, sensing of cyanide (CN-), fluoride (F-), chloride (Cl-), bromide (Br-), nitrate (NO3 -), acetate (CH3COO-), and bisulfate (HSO4 -) is performed by a boron-based molecular receptor, N,N,N,3,5-pentamethyl-4-{2-thia-9-boratricyclo[8.4.0.03,8]tetradeca-1(10),3(8),4,6,11,13-hexaen-9-yl}anili-nium (1), and the three newly designed receptors from it. Thermodynamics, electronic structure, and photophysical properties are computed by employing density functional theory (DFT) and time-dependent density functional theory (TD-DFT) to explore selective sensing of these anions and its mechanism. Free-energy changes (ΔG) and binding energies (ΔE) suggest that among these anions, only binding of CN- and F- is thermodynamically feasible with a very strong binding affinity with the receptors. Boron atoms containing positive natural charges act as the electrophilic centers to bind the anions involving a 2p-2p orbital overlap resulting in charge transfer. In the receptor-analyte complexes with CN- and F-, fluorescence is quenched due to the intramolecular charge transfer transitions (π-π* transitions in the case of the receptors lead to fluorescence), internal conversion, and associated configurational changes. Among the six tested functionals, CAM-B3LYP/6-31G(d) is found to be the most accurate one. The designed receptors are better fluorescent probes for F- and CN-, demonstrating their importance for the practical utility.

New insights into the sensing mechanism of a phosphonate pyrene chemosensor for TNT

As security needs have increased, mechanism investigation has become of high importance in the development of new sensitive and selective chemosensors for chemical explosives. This study details a theoretical investigation of the sensing mechanism of a new phosphonate pyrene chemosensor for trinitrotoluene (TNT), suggesting a different interaction mode between the probe and TNT from the one previously reported. The invalidity of the mechanism of binding TNT through intermolecular hydrogen bonds was proved using the Gibbs free energy profile and 1H NMR analysis. Frontier molecular orbitals (FMOs) analysis was used to show that photo-induced electron transfer (PET) is the underlying mechanism behind the luminescence quenching of the probe upon exposure to TNT, the rationality of which was further confirmed by the recording of a high charge transfer rate. We also found the existence of an energy level crossing between the local excited (LE) state and charge transfer (CT) state of a complex of the probe and TNT, which was confirmed using energy profile calculations along the linearly interpolated internal coordinate (LIIC) pathway.

A theoretical study on anion sensing mechanism of multi-phosphonium triarylboranes: intramolecular charge transfer and configurational changes

The binding selectivity and recognition mechanism of a series of mono-, di- and triphosphonium substituted triarylboranes: (4-(dimesitylboryl)-3,5-dimethylphenyl)phosphonium ([Mes₂BAr^P]⁺, 1), 1,1'-mesitylboranediylbis(3,5-dimethylphenyl)phosphonium ([MesBAr^P₂]²⁺, 2) and 1,1',1''-boranetriyltris(3,5-dimethylphenyl)phosphonium ([BAr^P₃]³⁺, 3) where Ar^P = 4-(H₃P)-2,6-Me₂-C₆H₂, for various anions has been investigated by employing density functional theory (DFT) and time dependent-density functional theory (TD-DFT) methods. Natural population analysis indicates the electrophilic nature of the boron centers in 1-3 for the nucleophilic addition of anions. The calculated free energy changes (ΔG) reveal that out of CN^-, F^-, Cl^-, Br^-, NO₃^-, CH₃COO^- and HSO₄^- only the binding of CN^- and F^- with 1, 2 and 3 is thermodynamically feasible. In addition, the calculated binding energies reflect that CN^- shows lesser binding affinity than F^- with 1, 2 and 3. Frontier molecular orbital (FMO) analysis reveals that the first excited states (S₁) of 1-3 are the local excited states with a π → π* transition, whereas the third excited state (S₃), fifth excited state (S₅), fourth excited state (S₄) and fourth excited states (S₄) of [Mes₂BAr^P]⁺F (1F, the fluoro form of 1), [MesBAr^P₂]²⁺F (2F, the fluoro form of 2), [Mes₂BAr^P]⁺CN (1CN, the cyano form of 1) and [MesBAr^P₂]²⁺CN (2CN, the cyano form of 2), respectively, are charge separation states found to be responsible for the intramolecular charge transfer (ICT) process. The partial configuration changes and ICT induce fluorescence quenching in 1F, 2F, 1CN and 2CN synergistically after an internal conversion (IC) from their respective S₃, S₅, S₄ and S₄ to S₁.

Selective Complexation of Cyanide and Fluoride Ions with Ammonium Boranes: A Theoretical Study on Sensing Mechanism Involving Intramolecular Charge Transfer and Configurational Changes

The anion binding selectivity and the recognition mechanism of two isomeric boranes, namely, 4-[bis(2,4,6-trimethylphenyl)boranyl]-N,N,N-trimethylaniline ([p-(Mes₂B)C₆H₄(NMe₃)]⁺, 1, where "Mes" represents mesitylene and "Me" represents methyl) and 2-[bis(2,4,6-trimethylphenyl)boranyl]-N,N,N-trimethylaniline ([o-(Mes₂B)C₆H₄(NMe₃)]⁺, 2) has been investigated using density functional theory (DFT) and time dependent-density functional theory (TD-DFT) methods. Natural population analysis indicates that the central boron atoms in 1 and 2 are the most active centers for nucleophilic addition of anions. The negative magnitude of free energy changes (ΔG) reveals that out of CN^-, F^-, Cl^-, Br^-, NO₃^-, and HSO₄^- only the binding of CN^- and F^- with 1 and 2 is thermodynamically feasible and spontaneous. In addition, the calculated binding energies reveal that the CN^- is showing lesser binding affinity than F^- both with 1 and 2, while other ions, viz. NO₃^-, HSO₄^-, Br^-, and Cl^-, either do not bind at all or show very insignificant binding energy. The first excited states (S₁) of 1 and 2 are shown to be the local excited states with π → σ* transition by frontier molecular orbital analysis, whereas fourth excited states (S₄) of 4-[bis(2,4,6-trimethylphenyl)boranyl]-N,N,N-trimethylaniline cyanide ([p-(Mes₂B)C₆H₄(NMe₃)] CN, 1CN, the cyano form of 1) and 4-[bis(2,4,6-trimethylphenyl)boranyl]-N,N,N-trimethylaniline fluoride ([p-(Mes₂B)C₆H₄(NMe₃)] F, 1F, the fluoro form of 1) and fifth excited state (S₅) of 2-[bis(2,4,6-trimethylphenyl)boranyl]-N,N,N-trimethylaniline fluoride ([o-(Mes₂B)C₆H₄(NMe₃)] F, 2F, the fluoro form of 2) are charge separation states that are found to be responsible for the intramolecular charge transfer (ICT) process. The synergistic effect of ICT and partial configuration changes induce fluorescence quenching in 1CN, 1F, and 2F after a significant internal conversion (IC) from S₄ and S₅ to S_1.