One-step fabrication of carbon decorated Co3O4/BiVO4 p-n heterostructure for enhanced visible-light photocatalytic properties

CdS QDs grown on ellipsoidal BiVO4 for efficient photocatalytic degradation of tetracycline

Designing efficient, inexpensive, and stable photocatalysts to degrade organic pollutants and antibiotics has become an effective way for environmental remediation. In this work, we successfully performed in situ growth of CdS QDs on the surface of elliptical BiVO4 to try to show the advantage of the binary heterojuncted photocatalyst (BVO@CdS) for the photocatalytic degradation of tetracycline (TC). The In situ growth of CdS QDs can provide a large number of reactive sites and also generate a larger contact area with BiVO4. In addition, compared with mechanical composite materials, in situ growth can significantly reduce the energy barrier at the interface between BiVO4 and CdS, providing more channels for the separation and migration of photogenerated charge carriers, and further improving reaction activity. As a result, BVO@CdS-0.05 shows the best degradation efficiency, with a degradation rate of 88% after 30 min under visible light. The TC photodegradation follows a pseudo-second-order reaction with a dynamic constant of 0.472 min-1, which is 6.47 times that of pure BiVO4, 7.24 times that of pure CdS QDs and 2 times that of the mechanical composite. The degradation rate of BVO@CdS-0.05 decreases to 77.8% with a retention rate of 88.5% after four cycles, demonstrating excellent stability. Through liquid chromatography-mass spectrometry (LC-MS) analysis, two possible pathways for TC degradation are proposed. Through free radical capture experiments, electron spin resonance measurements, and photoelectrochemical comprehensive analysis, it is confirmed that BVO@CdS composites have constructed an efficient Z-scheme heterojunction via in situ growth, thereby highly enhancing the separation and transport efficiency of charge carriers.

Double Z-scheme Co3O4/Bi4O7/Bi2O3 composite activated peroxymonosulfate to efficiently degrade tetracycline under visible light

Co₃O₄/Bi₄O₇/Bi₂O₃ (CBB) composites were prepared, in which Co₃O₄ was synthesized from Co-MOF as precursor. The peroxymonosulfate (PMS) activated by CBB catalyst under visible light was used to degrade tetracycline (TC). Owing to the synergistic effect of photocatalysis and PMS activation, 98.4% of TC was removed within 60 min. The optimal loading of Co₃O₄ was determined, and the influence of PMS dosage, initial pH, and disturbing anions on the degradation effect were investigated. The "CBB + Vis + PMS" system showed good reusability, and the degradation was only reduced by 1.7% after 5 cycles. This system also had a good degradation of other five pollutants. The quenching experiment showed that holes (h⁺), superoxide radicals (·O₂^-), and singlet oxygen (¹O₂) were the main active species. The degradation products of TC were determined by liquid chromatography-mass spectrometry, and the degradation pathway was proposed. Finally, a double Z-scheme degradation mechanism was proposed in the "CBB + Vis + PMS" system. The peroxymonosulfate activated by CBB under visible light to degrade organic pollutants has widespread application prospects in environmental remediation.

Fabrication of novel BiVO4/Bi2O3heterostructure with superior visible light induced photocatalytic properties

Heterostructure BiVO₄/Bi₂O₃nanocomposites with enhanced visible light activity are effectively synthesized through an easiest and single step hydrothermal route, using bismuth subnitrate and ammonium meta-vanadate as main raw materials in existence of citric acid. The phase and surface structure, topography and optical properties of synthesized composites are characterized by XRD, SEM, EDX, FTIR, UV-Visible and PL spectroscopy. It was found that 5%BiVO₄/Bi₂O₃(BOBV-5) nanocomposite exhibit excellent photocatalytic performance for rhodamine B dye degradation and tetracyclic under irradiation of visible light as compared to single component i.e. BiVO₄. The increased photocatalytic activity should be ascribed for making p-n heterojunction among p-type Bi₂O₃and n-type BiVO₄. This p-n heterojunction successfully reduce the recombination of photogenerated charge carriers. Furthermore, the BOBV-5 novel photocatalyst shows good stability in constructive five cycles and photocatalytic activity is best for conquering photo corrosion of a photocatalysts. To explain charge migration route, whole photocatalytic mechanism was described in terms of energy band structures. Furthermore, the present work is helpful effort for design of new visible light photocatalytic materials with heterojunction structures.

An overview on non-spherical semiconductors for heterogeneous photocatalytic degradation of organic water contaminants

Because of their carcinogenicity and mutagenicity, the elimination of organic contaminants from surface and subsurface water is a subject of environmental significance. Conventional water decontamination approaches such as membrane separation, ultrafiltration, adsorption, reverse osmosis, coagulation, etc., have relatively higher operating costs and can generate highly toxic secondary contaminants. On the other hand, heterogeneous photocatalysis, an advanced oxidation process (AOP), is considered a clean and cost-effective process for organic pollutants degradation. Owing to their distinctive structure and physicochemical properties non-spherical semiconductors have gained considerable limelight in the photocatalytic degradation of organic contaminants. The current review briefly introduces a wide range of organic water contaminants. Recent advances in non-spherical semiconductor assembly and their photocatalytic degradation applications are highlighted. The underlying mechanism, fundamentals of photocatalytic reactions, and the factors affecting the degradation performance are also alluded including the current challenges and future research perspectives.

One-step in situ formation of 3D hollow sphere-like V2O5 incorporated Ni3V2O8 hybrids with enhanced photocatalytic performance

3-D hollow sphere-like Ni₃V₂O₈ immobilizing V₂O₅ nanoparticles were successfully synthesized via in situ recrystallization method without any template. The compact contact between V₂O₅ and Ni₃V₂O₈ ensuring the photo-inducted carriers fast transport, which would be beneficial for inhibiting recombination rate of electron-hole (e^-/h⁺) pairs. Moreover, the hollow sphere-like structure composed of the smaller nanoparticle could effectively improve of visible light capture capacity (multiple scattering for hollow architectures). Benefiting the synergistic promoting effect of the suitable heterojunction and the fascinating 3D hollow feature, the V₂O₅@Ni₃V₂O₈ indicated significantly degradation performance when evaluated as photocatalyst for degradation antibiotics and chlorophenols under visible light irradiation. Impressively, the 2-V₂O₅@Ni₃V₂O₈ heterojunction deliver the optimal degradation efficiency for TC (OTC) and 2,4-DCP (4-CP) were 90.0% (~91.2%) and 92.6% (~90.0%), respectively. The appearance mechanism for the enhancement photocatalytic performance was also elucidated in detail. The facile strategy provides a novel insight into the designing of the photocatalyst with advantages of charges separation and light-harvesting for degradation of contaminants in wastewater.

Fabrication of electrochemically-modified BiVO4-MoS2-Co3O4composite film for bisphenol A degradation

A new electrochemically-modified BiVO₄-MoS₂-Co₃O₄ (represented as E-BiVO₄-MoS₂-Co₃O₄) thin film electrode was successfully synthesized for environmental application. MoS₂ and Co₃O₄ were grown on the surface of BiVO₄ to obtain BiVO₄-MoS₂-Co₃O₄. E-BiVO₄-MoS₂-Co₃O₄ film was achieved by further electrochemical treatment of BiVO₄-MoS₂-Co₃O₄. The as-prepared E-BiVO₄-MoS₂-Co₃O₄ exhibited significantly enhanced photoelectrocatalytic activity. The photocurrent density of E-BiVO₄-MoS₂-Co₃O₄ thin film is 6.6 times that of BiVO₄ under visible light irradiation. The degradation efficiency of E-BiVO₄-MoS₂-Co₃O₄ for bisphenol A pollutant was 81.56% in photoelectrochemical process. The pseudo-first order reaction rate constant of E-BiVO₄-MoS₂-Co₃O₄ film is 3.22 times higher than that of BiVO₄. And its reaction rate constant in photoelectrocatalytic process is 14.5 times or 2 times that in photocatalytic or electrocatalytic process, respectively. The improved performance of E-BiVO₄-MoS₂-Co₃O₄ was attributed to the synergetic effects of the reduction of interfacial charge transfer resistance, the formation of oxygen vacancies and sub-stoichiometric metal oxides and higher separation efficiency of photogenerated electron-hole pairs. E-BiVO₄-MoS₂-Co₃O₄ is a promising composite material for pollutants removal.

Highly efficient activation of peroxymonosulfate by Co3O4/Bi2WO6 p-n heterojunction composites for the degradation of ciprofloxacin under visible light irradiation

Photocatalytic technology assisted via peroxymonosulfate (PMS) has good potential in water treatment. In this study, the Co₃O₄/Bi₂WO₆ composite was constructed via an in-situ calcination process and used to activate PMS for the degradation of ciprofloxacin (CIP) under visible light irradiation. The obtained 5 wt% Co₃O₄/Bi₂WO₆(CBWO-2) can highly effectively remove 86.2% CIP within 5 min visible light irradiation in presence of PMS. The excellent degradation performance of Co₃O₄/Bi₂WO₆/PMS system can be attributed to the synergistic effect between p-n heterojunction and PMS activation. The conduction band and valence band deviation between Co₃O₄ and Bi₂WO₆ were calculated by XPS techniques. Besides, DFT calculations were performed to further confirm the internal structure between Co₃O₄ and Bi₂WO₆. This work not only provides an approach to fabricate heterostructures but also indicated that Co₃O₄/Bi₂WO₆/PMS/Vis system is a potential environment remediation alternative for the efficient removal of recalcitrant organic compounds from wastewaters.

Sunlight Selective Photodeposition of CoOx(OH)y and NiOx(OH)y on Truncated Bipyramidal BiVO4 for Highly Efficient Photocatalysis

Facet-engineered monoclinic scheelite BiVO₄ particles decorated with various cocatalysts were successfully synthesized by selective sunlight photodeposition of metal or metal oxy(hydroxide) nanoparticles onto the facets of truncated bipyramidal BiVO₄ monoclinic crystals coexposing {010} and {110} facets. X-ray photoelectron spectroscopy, scanning electron microscopy, and scanning Auger microscopy revealed that metallic silver (Ag) and cobalt (oxy)hydroxide (CoO_x(OH)_y) particles were selectively deposited onto the {010} and {110} facets, respectively, regardless of the cocatalyst amount. By contrast, the nickel (oxy)hydroxide (NiO_x(OH)_y) photodeposition depends on the nickel precursor amount with an unprecedented selectivity for 0.1 wt % NiO_x(OH)_y/BiVO₄ with a preferential deposition onto the {010} facets and the edges between the {110} facets. Moreover, these noble metal-free heterostructures led to remarkable photocatalytic properties for rhodamine B photodecomposition and sacrificial water oxidation reactions. For instance, 0.2 wt % CoO_x(OH)_y/BiVO₄ led to one of the highest oxygen evolution rates, i.e., 1538 μmol h^-1 g^-1, ever described which is ten times higher than that found for bare BiVO₄. The selective deposition of cobalt (oxy)hydroxide species onto the more electron-deficient facet of truncated bipyramidal monoclinic BiVO₄ particles favors photogenerated charge carrier separation and therefore plays a key role for efficient photochemical oxygen evolution.

Co3O4/Bi4O5I2/Bi5O7I C-Scheme Heterojunction for Degradation of Organic Pollutants by Light-Emitting Diode Irradiation

Remediation of organic pollutant matrixes from wastewater by photodegradation using different heterojunctions is extensively studied to improve performance for potential application. Brilliant black (BB) and p-nitrophenol (PNP) have been detected in the environment and implicated as directly or indirectly carcinogenic to human health. This work analyzes their elimination from aqueous solutions under visible-light irradiation with composites of cobalt(II, III) oxide and bismuth oxyiodides (Co₃O₄/Bi₄O₅I₂/Bi₅O₇I). The synthesized nanomaterial properties were investigated using various techniques such as BET, SEM/EDS, TEM, XRD, FTIR, PL, and UV-vis. All the nanocomposites absorbed in the visible range of the solar spectrum with band gaps between 1.68 and 2.79 eV, and the specific surface area of the CB2 composite increased by 35.8% from that of Bi₄O₅I₂/Bi₅O₇I. There was an observed massive reduction in the rate of electron and hole recombination, and the band gaps of the composites decreased. The mineralization of PNP and BB was followed by determination of the total organic carbon with reductions of 93.6 and 83.7%, respectively. The main active species were the hydroxyl radicals, while the superoxide anion radical and generated holes were minor as confirmed by radical trapping experiments. The optimum pHs for degradation of PNP and BB were 9.6 and 5.3, respectively. The enhanced performance of the catalyst was due to C-scheme heterojunction formation that reduced the electron and hole recombination rate and was attributed to strong adsorption of the pollutants on the photocatalyst active surface. The nanocomposite is apposite for solar energy-driven remediation of organic pollutants from environmental aqueous samples.

Towards visible light driven photoelectrocatalysis for water treatment: Application of a FTO/BiVO4/Ag2S heterojunction anode for the removal of emerging pharmaceutical pollutants

Pharmaceuticals have been classified as emerging water pollutants which are recalcitrant in nature. In the quest to find a suitable technique in removing them from contaminated water, photoelectrocatalytic oxidation method has attracted much attention in recent years. This report examined the feasibility of degrading ciprofloxacin and sulfamethoxazole through photoelectrocatalytic oxidation using FTO-BiVO4/Ag2S with p-n heterojunction as anode. BiVO4/Ag2S was prepared through electrodeposition and successive ionic layer adsorption/reaction on FTO glass. Structural and morphological studies using XRD, SEM, EDS and diffusive reflectance UV-Vis confirmed the successful construction of p-n heterojunction of BiVO4/Ag2S. Electrochemical techniques were used to investigate enhanced charge separation in the binary electrode. The FTO-BiVO4/Ag2S electrode exhibited the highest photocurrent response (1.194 mA/cm-2) and longest electron lifetime (0.40 ms) than both pristine BiVO4 and Ag2S electrodes which confirmed the reduction in recombination of charge carriers in the electrode. Upon application of the prepared FTO-BiVO4/Ag2S in photoelectrocatalytic removal of ciprofloxacin and sulfamethoxazole, percentage removal of 80% and 86% were achieved respectively with a low bias potential of 1.2 V (vs Ag/AgCl) within 120 min. The electrode possesses good stability and reusability. The results obtained revealed BiVO4/Ag2S as a suitable photoanode for removing recalcitrant pharmaceutical molecules in water.