In operando EPR investigation of redox mechanisms in LiCoO2

Suppressing Surface Ligand-to-Metal Charge Transfer toward Stable High-Voltage LiCoO2

Increasing the charging cutoff voltage is a viable approach to push the energy density limits of LiCoO2 and meet the requirements of the rapid development of 3C electronics. However, an irreversible oxygen redox is readily triggered by the high charging voltage, which severely restricts practical applications of high-voltage LiCoO2. In this study, we propose a modification strategy via suppressing surface ligand-to-metal charge transfer to inhibit the oxygen redox-induced structure instability. A d0 electronic structure Zr4+ is selected as the charge transfer insulator and successfully doped into the surface lattice of LiCoO2. Using a combination of theoretical calculations, ex situ X-ray absorption spectra, and in situ differential electrochemical mass spectrometry analysis, our results show that the modified LiCoO2 exhibits suppressed oxygen redox activity and stable redox electrochemistry. As a result, it demonstrates a robust long-cycle lattice structure with a practically eliminated voltage decay (0.17 mV/cycle) and an excellent capacity retention of 89.4% after 100 cycles at 4.6 V. More broadly, this work provides a new perspective on suppressing the oxygen redox activity through modulating surface ligand-to-metal charge transfer for achieving a stable high-voltage ion storage structure.

Reducing Co/O Band Overlap through Spin State Modulation for Stabilized High Capability of 4.6 V LiCoO2

High-voltage LiCoO₂ (LCO) attracts great interest because of its large specific capacity, but it suffers from oxygen release, structural degradation, and quick capacity drop. These daunting issues root from the inferior thermodynamics and kinetics of the triggered oxygen anion redox (OAR) at high voltages. Herein, a tuned redox mechanism with almost only Co redox is demonstrated by atomically engineered high-spin LCO. The high-spin Co network reduces the Co/O band overlap, eliminates the adverse phase transition of O3 → H1-3, delays the exceeding of the O 2p band over the Fermi level, and suppresses excessive O → Co charge transfer at high voltages. This function intrinsically promotes Co redox and restrains O redox, fundamentally addressing the issues of O₂ release and coupled detrimental Co reduction. Moreover, the chemomechanical heterogeneity caused by different kinetics of Co/O redox centers and the inferior rate performance limited by slow O redox kinetics is simultaneously improved owing to the suppression of slow OAR and the excitation of fast Co redox. The modulated LCO delivers ultrahigh rate capacities of 216 mAh g^-1 (1C) and 195 mAh g^-1(5C), as well as high capacity retentions of 90.4% (@100 cycles) and 86.9% (@500 cycles). This work sheds new light on the design for a wide range of O redox cathodes.

Enhanced CO capture properties of Li2MnO3via inducing layered to spinel transition by cation doping with Fe, Co, Ni and Cu

Lithium manganate (Li2MnO3) was the first alkaline ceramic to show selective CO chemisorption in non-oxidative atmospheres, which is of interest for gas separation processes, such as high purity H2 production.

Elucidating the charge storage mechanism of carbonaceous and organic electrode materials for sodium ion batteries

Sodium ion batteries (SIB) have received much research attention in the past decades as they are considered to be one alternative to the currently prevalent lithium ion batteries, and carbonaceous and organic compounds present two promising classes of SIB electrode materials advantaged by abundance of their constituent elements and reduced environmental footprints. To accelerate the development of these materials for SIB applications, future research directions must be guided by a thorough understanding of the charge storage mechanism. This review presents recent efforts in mechanism elucidation for these two classes of SIB electrode materials since, compared to their inorganic counterparts, they have unique challenges in material analysis. Topics covered will include characterization techniques and analytical frameworks for mechanism elucidation, emphasizing the advantages and limitations of individual experimental methodologies and providing a commentary on scientific rigor in result interpretation.

Resolution of Lithium Deposition versus Intercalation of Graphite Anodes in Lithium Ion Batteries: An In Situ Electron Paramagnetic Resonance Study

In situ electrochemical electron paramagnetic resonance (EPR) spectroscopy is used to understand the mixed lithiation/deposition behavior on graphite anodes during the charging process. The conductivity, degree of lithiation, and the deposition process of the graphite are reflected by the EPR spectroscopic quality factor, the spin density, and the EPR spectral change, respectively. Classical over‐charging (normally associated with potentials ≤0 V vs. Li⁺/Li) are not required for Li metal deposition onto the graphite anode: Li deposition initiates at ca. +0.04 V (vs. Li⁺/Li) when the scan rate is lowered to 0.04 mV s⁻¹. The inhibition of Li deposition by vinylene carbonate (VC) additive is highlighted by the EPR results during cycling, attributed to a more mechanically flexible and polymeric SEI layer with higher ionic conductivity. A safe cut‐off potential limit of +0.05 V for the anode is suggested for high rate cycling, confirmed by the EPR response over prolonged cycling.

EPR Everywhere

This review is inspired by the contributions from the University of Denver group to low-field EPR, in honor of Professor Gareth Eaton's 80th birthday. The goal is to capture the spirit of innovation behind the body of work, especially as it pertains to development of new EPR techniques. The spirit of the DU EPR laboratory is one that never sought to limit what an EPR experiment could be, or how it could be applied. The most well-known example of this is the development and recent commercialization of rapid-scan EPR. Both of the Eatons have made it a point to remain knowledgeable on the newest developments in electronics and instrument design. To that end, our review touches on the use of miniaturized electronics and applications of single-board spectrometers based on software-defined radio (SDR) implementations and single-chip voltage-controlled oscillator (VCO) arrays. We also highlight several non-traditional approaches to the EPR experiment such as an EPR spectrometer with a "wand" form factor for analysis of the OxyChip, the EPR-MOUSE which enables non-destructive in situ analysis of many non-conforming samples, and interferometric EPR and frequency swept EPR as alternatives to classical high Q resonant structures.

Operando EPR and EPR Imaging Study on a NaCrO2 Cathode: Electronic Property and Structural Degradation with Cr Dissolution

NaCrO₂ is a potential cathode material for sodium-ion batteries due to its low cost, safety, and high power. It is necessary to further understand its electronic property during cycling in advance of practical application. In this work, operando EPR is carried out to monitor the evolution of the electronic structure for NaCrO₂ cycled between 2.2-3.6 V and 2.2-4.5 V. We discover that electronic delocalization takes place at the early stage of charge, which may account for the excellent rate performance. In addition, via EPR imaging, an EPR signal associated with the irreversible phase transition at 3.8 V is located in the electrolyte, which is then attributed to the Cr⁵⁺ ions dissolved with the surface reconstruction. These findings may help researchers to better design and modify the Cr-based cathode materials.