Enhanced energy density in hydroxyl-modified barium titanate/poly(fluorovinylidene-co-trifluoroethylene) nanocomposites with improved interfacial polarization

Kirigami-Origami-Inspired Lead-Free Piezoelectric Ceramics

Kirigami- and oirigami-inspired techniques have emerged as effective strategies for material structure design; however, the use of these techniques is usually limited to soft and deformable materials. Piezoelectric ceramics, which are typical functional ceramics, are widely used in electronic and energy devices; however, the processing options for piezoelectric ceramics are limited by their brittleness and feedstock viscosity. Here, a design strategy is proposed for the preparation of lead-free piezoelectric ceramics inspired by kirigami/origami. This strategy involves direct writing printing and control over the external gravity during the calcination process for the preparation of curved and porous piezoelectric ceramics with specific shapes. The sintered BaTiO₃ ceramics with curved geometries produced using this strategy exhibit a high piezoelectric constant (d₃₃ = 275 pC N^-1 ), which is 45% higher than that of conventionally sintered sheet ceramics. The curved structure of the ceramics is well-suited for use in the human body and it was determined that these curved ceramics can detect pulse signals. This strategy can be applied in the large-scale and low-cost production of other piezoelectric ceramics with various curved shapes and provides a new approach for the preparation of complex-shaped ceramics.

Modulation of the interfacial architecture enhancing the efficiency and energy density of ferroelectric nanocomposites via the irradiation method

Flexible dielectric materials such as poly(vinylidene fluoride)-based nanocomposites with high energy density are employed for applications in modern electronic and electric systems. In this study, we improve traditional methods by optimizing the interfacial structure, achieving a 34% increase in energy density without reduced discharge efficiency. Herein, a simple solution-cast method is used to prepare poly(vinylidene fluoride-co-trifluoroethylene) nanocomposites filled by γ-methacryloyl-propyltrimethoxysilane (MPMS) grafting barium titanate nanoparticles, forming a class of cross-linking networks by irradiation. More additional interfaces arising from irradiation cross-linking give rise to high discharge energy density, and the small crystalline domain and cross-linking network enhance the charge-discharge efficiency. Furthermore, we find two types of cross-linking centers on the network. One is more beneficial to energy density, and the other is more beneficial to efficiency. Regulating two types of cross-linking centers can balance efficiency and energy density. In summary, this work provides a promising strategy for exploiting advanced flexible dielectric materials to meet application requirements.

High dielectric thin films based on barium titanate and cellulose nanofibrils

A series of composite films based on tetragonal barium titanate (BTO) and cellulose nanofibrils (CNF) with high dielectric constant are prepared using a casting method in aqueous solution. No organic solvent is involved during the preparation, which demonstrates the environmental friendliness of the novel material. With less than 30 wt% of filler loading, the excellent distribution of BTO nanoparticles within the CNF matrix is revealed by the FE-SEM images. The dielectric constant of the CNF/BTO (30 wt%) composite film reaches up to 188.03, which is about seven times higher than that of pure CNF (25.24), while the loss tangent only rises slightly from 0.70 to 1.21 (at 1 kHz). The thin films kept their dielectric properties on an acceptable level after repeatedly twisting or rolling 10 times. The improvement of thermal stability is observed with the presence of BTO. The outstanding dielectric properties of the CNF/BTO composite film indicates its great potential to be utilized in energy storage applications.