Birnessite MnO2 decorated MWCNTs composite as a nonenzymatic hydrogen peroxide sensor

Rapid measurement of bacterial contamination in water: A catalase responsive-electrochemical sensor

The present study describes the development of a potentiometric sensor for microbial monitoring in water based on catalase activity. The sensor comprises a MnO2-modified electrode that responds linearly to hydrogen peroxide (H2O2) from 0.16 M to 3.26 M. The electrode potential drops when the H2O2 solution is spiked with catalase or catalase-producing microorganisms that decompose H2O2. The sensor is responsive to different bacteria and their catalase activities. The electrochemical sensor exhibits a lower limit of detection (LOD) for Escherichia coli at 11 CFU/ml, Citrobacter youngae at 12 CFU/ml, and Pseudomonas aeruginosa at 23 CFU/ml. The sensor shows high sensitivity at 3.49, 3.02, and 4.24 mV/cm2dec for E. coli, C. youngae, and P. aeruginosa, respectively. The abiotic sensing electrode can be used multiple times without changing the response potential (up to 100 readings) with a shelf-life of over six months. The response time is a few seconds, with a total test time of 5 min. Additionally, the sensor effectively tested actual samples (drinking and grey water), which makes it a quick and reliable sensing tool. Therefore, the study offers a promising water monitoring tool with high sensitivity, stability, good detection limit, and minimum interference from other water contaminants.

In situ or Ex situ Synthesis for Electrochemical Detection of Hydrogen Peroxide-An Evaluation of Co2SnO4/RGO Nanohybrids

Nowadays, there is no doubt about the high electrocatalytic efficiency that is obtained when using hybrid materials between carbonaceous nanomaterials and transition metal oxides. However, the method to prepare them may involve differences in the observed analytical responses, making it necessary to evaluate them for each new material. The goal of this work was to obtain for the first time Co₂SnO₄ (CSO)/RGO nanohybrids via in situ and ex situ methods and to evaluate their performance in the amperometric detection of hydrogen peroxide. The electroanalytical response was evaluated in NaOH pH 12 solution using detection potentials of -0.400 V or 0.300 V for the reduction or oxidation of H₂O₂. The results show that for CSO there were no differences between the nanohybrids either by oxidation or by reduction, unlike what we previously observed with cobalt titanate hybrids, in which the in situ nanohybrid clearly had the best performance. On the other hand, no influence in the study of interferents and more stable signals were obtained when the reduction mode was used. In conclusion, for detecting hydrogen peroxide, any of the nanohybrids studied, i.e., in situ or ex situ, are suitable to be used, and more efficiency is obtained using the reduction mode.

Highly efficient Ag doped δ-MnO2 decorated graphene: Comparison and application in electrochemical detection of H2O2

Cytotoxic H₂O₂ is an inevitable part of our life, even during this contemporary pandemic COVID-19. Personal protective equipment of the front line fighter against coronavirus could be sterilized easily by H₂O₂ for reuse. In this study, Ag doped δ-MnO₂ nanorods supported graphene nanocomposite (denoted as Ag@δ-MnO₂/G) was synthesized as a nonenzymatic electrochemical sensor for the sensitive detection of H₂O₂. The ternary nanocomposite has overcome the poor electrical conductivity of δ-MnO₂ and also the severe aggregation of Ag NPs. Furthermore, δ-MnO₂/G provided a rougher surface and large numbers of functional groups for doping more numbers of Ag atoms, which effectively modulate the electronic properties of the nanocomposite. As a result, electroactive surface area and electrical conductivity of Ag@δ-MnO₂/G increased remarkably as well as excellent catalytic activity observed towards H₂O₂ reduction. The modified glassy carbon electrode exhibited fast amperometric response time (<2 s) in H₂O₂ determination. The limit of detection was calculated as 68 nM in the broad linear range (0.005-90.64 mM) with high sensitivity of 104.43 µA mM^-1 cm^-2. No significant interference, long-term stability, excellent reproducibility, satisfactory repeatability, practical applicability towards food samples and wastewater proved the efficiency of the proposed sensor.

Facile preparation of MnO2-TiO2 nanotube arrays composite electrode for electrochemical detection of hydrogen peroxide

The MnO₂-TNTA composite electrodes were obtained through depositing MnO₂ into TiO₂ nanotube arrays (TNTA) by successive ionic layer adsorption reaction (SILAR) and subsequent hydrothermal method. The MnO₂-TNTA nanocomposites were used as electrochemical sensors for the detection of hydrogen peroxide (H₂O₂). The preparation conditions of MnO₂-TNTA electrodes and test conditions affect the electrochemical detection performance significantly. The optimal conditions are listed as follows: the number of SILAR cycles, 6 times; KMnO₄ solution temperature, 50 °C; supporting electrolyte, 0.5 M NaOH. Under these conditions, the MnO₂-TNTA electrode exhibits the best performance for detecting H₂O₂. The optimized MnO₂-TNTA electrode has a minimum detection limit of 0.6 μM (S/N = 3) and a linear range of 5 μM ∼ 13 mM, which is much superior to the previously-reported electrodes. Moreover, the optimized MnO₂-TNTA electrode possesses high selectivity, excellent stability and good reproducibility in the detection of H₂O₂. When used in the determination of H₂O₂ content in actual samples including disinfectant and milk, it also shows good accuracy, ideal recovery (96.00% ∼ 102.67%) and high precision (RSD < 4.0%).