Spectroscopy and crystal chemical properties of NaCa2[Si4O10]F natural agrellite with tubular structure

Co-Doping Effect of Mn2+ and Eu3+ on Luminescence in Strontiowhitlockite Phosphors

A new series of Sr-based phosphates, Sr9-xMnxEu(PO4)7, were synthesized using the high-temperature solid-state method in air. It was found that these compounds have the same structure as strontiowhitlockite, which is a β-Ca3(PO4)2 (or β-TCP) structure. The concentration of Mn2+ ions required to form a pure strontiowhitlockite phase was determined. An unusual partial reduction of Eu3+ to Eu2+ in air was observed and confirmed by photoluminescence (PL) and electron spin resonance (ESR) spectra measurements. The PL spectra recorded under 370 nm excitation showed transitions of both 4f5d-4f Eu2+ and 4f-4f Eu3+. The total integral intensity of the PL spectra, monitored at 395 nm, decreased with increasing Mn2+ concentration due to quenching effect of Eu3+ by the Mn2+ levels. The temperature dependence of Eu2+ photoluminescence in a Sr9-xMnxEu(PO4)7 host was investigated. The conditions for the reduction of Eu3+ to Eu2+ in air were discussed.

Crystal Chemistry, Isomorphism, and Thermal Conversions of Extra-Framework Components in Sodalite-Group Minerals

Isomorphic substitutions of extra-framework components in sodalite-group aluminosilicate minerals and their thermal conversions have been investigated using infrared, Raman, electron spin resonance (ESR), as well as ultraviolet, visible and near infrared (UV–Vis–near IR) absorption spectroscopy methods and involving chemical and X-ray diffraction data. Sodalite-related minerals from gem lazurite deposits (haüyne, lazurite, and slyudyankaite) are characterized by wide variations in S-bearing extra-framework components including SO42− and various polysulfide groups (S2●−, S3●−, S4●− radical anions, and S4 and S6 neutral molecules) as well as the presence of CO2 molecules. Heating at 700 °C under reducing conditions results in the transformation of initial S-bearing groups SO42− and S3●− to a mixture of S2−, HS−, S2●−, and S4●− and transformation of CO2 to a mixture of CO32− and C2O42− or HC2O4− anionic groups. Further heating at 800 °C in air results in the decomposition of carbonate and oxalate groups, restoration of the SO42− and S3●− groups, and a sharp transformation of the framework. The HS− anion is stable only under reducing conditions, whereas the S3●− radical anion is the most stable polysulfide group. The HS−-dominant sodalite-group mineral sapozhnikovite forms a wide solid-solution series with sodalite. The conditions required for the formation of HS−- and CO20-bearing sodalite-group minerals are discussed.

Tinaksite and Tokkoite: X-ray Powder Diffraction, Optical, and Vibrational Properties

In this study, natural tinaksite (K2Ca2NaTi[Si7O18OH]O) and tokkoite (K2Ca4[Si7O18OH](OH,F)) collected in charoite rocks of the Murun alkaline massif (Siberia, Russia) were examined by X-ray diffraction and optical and vibrational spectroscopic methods. A comparative analysis of the experimental diffraction patterns with respect to the calculated X-ray powder diffraction patterns was carried out for tinaksite and tokkoite powders. The shift in the diffraction peaks of tinaksite is explained by the smaller values of the unit cell parameters a and b as compared with those of tokkoite. A similar shift of the peaks is also observed in the Raman and infrared absorption spectra; however, this feature is explained by the difference in the chemical composition of the minerals. The shoulder in the absorption spectra at about 800 nm in tinaksite and 700 nm in tokkoite corresponds to the presence of Mn2+ and Fe3+ absorption bands, the presence of which determines the color of tinaksite and tokkoite. The luminescence band with a maximum at about 540–550 nm in the photoluminescence spectra is related to Mn2+ centers, while an additional band at about 610 nm can be associated with Ti3+ centers in tinaksite. The intensity of the Fe3+ ESR signal increases in both samples after heating, while the intensities of the bands associated with OH groups decrease in tinaksite and tokkoite. This characteristic is the result of iron oxidation and dehydrogenation reaction.

Relationships between the Structural, Vibrational, and Optical Properties of Microporous Cancrinite

The crystal-chemical, vibrational, and optical properties of microporous aluminosilicate cancrinite have been investigated by combining electron probe microanalysis, single-crystal X-ray diffraction, infrared (IR) absorption, Raman, UV-Visible absorption, and electron spin resonance spectroscopy. The behavior of the peaks in the IR spectra was also studied during the dehydration of the sample. The analyzed sample has the following unit cell parameters (P63): a = 12.63189(14) Å, c = 5.13601(7) Å. The empirical formula, based on 12(Si + Al), is Na6.47Ca1.23K0.01[Al5.97Si6.03O24] (CO3)1.45(SO4)0.03Cl0.01·2H2O. The Al-Si framework of AB-type is formed by columns of based-shared “cancrinite” (CAN) cages, containing Na and H2O positions located on the 3-fold axis, and channels with CO3 groups, lying in two mutually exclusive and partially occupied positions in the center of the channel, and split Na/Ca cation sites. The revealed characteristics are somewhat different in comparison with the cancrinite structural features previously described in the literature. Studied crystals change color from grayish-pink to blue after X-ray irradiation (104 Gy). The blue color of the irradiated cancrinite is caused by the formation (CO3)−● radicals in the crystals. Combining the results obtained using the selected methods will provide a better understanding of the relationships between the structural, chemical, and optical-physical properties of microporous aluminosilicates.

Spectroscopic and Crystal-Chemical Features of Sodalite-Group Minerals from Gem Lazurite Deposits

Five samples of differently colored sodalite-group minerals from gem lazurite deposits were studied by means of electron microprobe and wet chemical analyses, infrared, Raman, electron spin resonance (ESR) and UV-Visible spectroscopy, and X-ray diffraction. Various extra-framework components (SO42−, S2− and Cl− anions, S3•−, S2•− and SO3•− radical anions, H2O, CO2, COS, cis- as well as trans- or gauche-S4 neutral molecules have been identified. It is shown that S3•− and S4 are the main blue and purple chromophores, respectively, whereas the S2•− yellow chromophore and SO3•− blue chromophore play a subordinate role. X-ray diffraction patterns of all samples of sodalite-group minerals from lazurite deposits studied in this work contain superstructure reflections which indicate different kinds of incommensurate modulation of the structures.

Structural and vibrational properties of agrellite

Agrellite, NaCa₂Si₄O₁₀F, is a tubular silicate mineral which crystal structure is characterized by extended [Si₈O₂₀]^8– tubes and has a two-dimensional channel system. The mineral is a representative of a complex silicate family which contains some structural voids but cannot be considered as microporous because of small channel widths. However, the channel system of such minerals is able to host single guest atoms, molecules or radicals which can affect their physical properties. Presently, the exact mechanism of such hosting is undetermined. However, such information could be quite useful for materials’ application as zeolites as well as for a better understanding of their formation mechanisms. In this work we couple X-ray diffraction, infrared (IR) spectroscopy and ab initio calculations to identify structural features in agrellite from Malyy Murun massif (Russia) caused by incorporation of either H₂O or OH⁻ into the channel system. We construct structural models of water-containing NaCa₂Si₄O₁₀F and identified H₂O positions. The derivation of H₂O sites is based on simulation of IR-spectra. Infrared spectroscopy in combination with the ab initio calculation has proven to be an effective tool for the identification of the structural positions of hydroxyl anions (OH⁻) and neutral water groups (H₂O) in minerals.

Fedorite from Murun Alkaline Complex (Russia): Spectroscopy and Crystal Chemical Features

Fedorite is a rare phyllosilicate, having a crystal structure characterized by SiO4-tetrahedral double layers located between continuous layers formed by edge-sharing (Ca,Na)-octahedra, and containing interlayer K, Na atoms and H2O molecules. A mineralogical-petrographic and detailed crystal-chemical study of fedorite specimens from three districts of the Murun alkaline complex was performed. The sequence of the crystallization of minerals in association with fedorite was established. The studied fedorite samples differ in the content of interlayer potassium and water molecules. A comparative analysis based on polyhedral characteristics and deformation parameters was carried out. For the first time, EPR, optical absorption and emission spectra were obtained for fedorite. The raspberry-red coloration of the mineral specimens could be attributed to the presence of Mn4+ ions.

Luminescence of Agrellite Specimen from the Kipawa River Locality

Using steady-state luminescence measurements, the luminescence spectra of Ce3+, Pr3+, Nd3+, Sm3+, Eu3+, Dy3+, Er3+ and Yb3+ for the agrellite sample from the Kipawa River region have been measured. The emission spectra of Eu3+ and Dy3+ next to those of Sm3+ and Pr3+ have been measured for characteristic excitation conditions. The most efficient luminescence activator in the studied sample was Ce3+. This ion was also a sensitizer of Pr3+, Sm3+, Eu3+, and Dy3+ luminescence.