A multi-residue electrochemical biosensor based on graphene/chitosan/parathion for sensitive organophosphorus pesticides detection

Biosensor in smart food traceability system for food safety and security

The burden of food contamination and food wastage has significantly contributed to the increased prevalence of foodborne disease and food insecurity all over the world. Due to this, there is an urgent need to develop a smarter food traceability system. Recent advancements in biosensors that are easy-to-use, rapid yet selective, sensitive, and cost-effective have shown great promise to meet the critical demand for onsite and immediate diagnosis and treatment of food safety and quality control (i.e. point-of-care technology). This review article focuses on the recent development of different biosensors for food safety and quality monitoring. In general, the application of biosensors in agriculture (i.e. pre-harvest stage) for early detection and routine control of plant infections or stress is discussed. Afterward, a more detailed advancement of biosensors in the past five years within the food supply chain (i.e. post-harvest stage) to detect different types of food contaminants and smart food packaging is highlighted. A section that discusses perspectives for the development of biosensors in the future is also mentioned.

Non-enzymatic electrochemical impedance sensor for selective detection of electro-inactive organophosphate pesticides using Zr-MOF/ZrO2/MWCNT ternary composite

The existence of multiple pesticide residues in fruits and vegetables constitutes a direct peril to living organisms. Therefore, it is crucial to develop a low-cost screening method for determining organophosphate pesticides (OPPs) in food samples. This study describes the solvothermal synthesis of a ternary composite comprising multi-walled carbon nanotubes (MWCNT), zirconium oxide, and a zirconium-metal-organic framework (Zr-MOF). The ternary composite was characterised using XRD, FESEM, FTIR, and BET. The ternary composite provides a large surface area (1158 m2/g) compared with the pristine Zr-MOF (868 m2/g). The composite-modified glassy carbon electrode was used to determine nine pesticides, including organophosphate (malathion, dimethoate, chlorpyrifos, monocrotophos, and glyphosate) and non-organophosphate (thiophanate methyl, carbendazim, atrazine, and 2,4, D). In particular, various chemical combinations of OPPs were selected, such as S-P=S, P=S, P=O, and non-OPPs such as C=S (with sulphur), and without sulphur. The sensor results show that the sensor selectivity is high for OPPs containing both phosphorus and sulphur molecules. The low detection limit of the sensor was 2.02, 2.8, 2.5, 1.11, and 2.01 nM for malathion, chlorpyrifos, dimethoate, monocrotophos, and glyphosate, respectively. The electrode exhibited significant chemical stability (93%) after 100 cycles, good repeatability, and a long shelf life. The sensor is reliable for qualitative real-time applications.

ZnO-rGO-based electrochemical biosensor for the detection of organophosphorus pesticides

The accurate determination of organophosphorus pesticide residues is of great importance for human disease monitoring and environmental safety. Numerous detection methods exist, among which sensitive monitoring of organophosphorus compounds using electrochemical sensors has gradually become a research hotspot. This paper used acetylcholinesterase (AChE) as an indicator anchored on a zinc oxide-reduced graphene oxide (ZnO-rGO) composite rich in active sites, in which green non-toxic zinc oxide (ZnO) nanomaterials were uniformly distributed on the reduced graphene for rapid detection of organophosphorus. The effects of different ratios of ZnO to reduced graphene on the performance of ZnO-rGO nanocomposites were investigated. The AChE/ZnO-rGO biosensor detects organophosphorus by electrochemical inhibition of acetylcholinesterase in the presence of organophosphorus. The developed electrochemical biosensor has high selectivity and good linearity, and the ZnO-rGO nanocomposite as a matrix for immobilization of acetylcholinesterase and detection of organophosphorus has the potential for highly sensitive pesticide detection.

Chitosan nanoplatforms in agriculture for multi-potential applications - Adsorption/removal, sustained release, sensing of pollutants & delivering their alternatives - A comprehensive review

An increase in the global population has led to an increment in the food consumption, which has demanded high food production. To meet the production demands, different techniques and technologies are adopted in agriculture the past 70 years, where utilization of the industry-manufactured/synthetic pesticides (SPTCs - e.g., herbicides, insecticides, fungicides, bactericides, nematicides, acaricides, avicides, and so on) is one of them. However, it has been later revealed that the usage of SPTCs has negatively impacted the environment - especially water and soil, and also agricultural products - mainly foods. Though preventive measures are taken by government agencies, still the utilization rate of SPTCs is high, and consequently, their maximum residual limit (MRL) levels in food are above tolerance, which further results in serious health concerns in humans. So, there is an immediate need for decreasing the utilization of the SPTCs by delivering them effectively at reduced levels in agriculture but with the required efficacy. Apart from that, it is mandatory to detect/sense and also to remove them to lessen the environmental pollution, while developing effective alternative techniques/technologies. Among many suitable materials that are developed/idenified, chitosan, a bio-polymer has gained great attention and is comprehensively implemented in all the above-mentioned applications - sensing, delivery and removal, due to their excellent and required properties. Though many works are available, in this work, a special attention is given to chitosan and its derivatives (i.e., chitosan nanoparticles (CNPs))based removal, controlled release and sensing of the SPTCs - specifically herbicides and insecticides. Moreover, the chitosan/CNPs-based protective effects on the in vivo models during/after their exposure to the SPTCs, and the current technologies like clustered regularly interspaced short palindromic repeats (CRISPR) as alternatives for SPTCs are also reviewed.

Nanobioengineered surface comprising carbon based materials for advanced biosensing and biomedical application

Carbon-based nanomaterials (CNMs) are at the cutting edge of materials science. Due to their distinctive architectures, substantial surface area, favourable biocompatibility, and reactivity to internal and/or external chemico-physical stimuli, carbon-based nanomaterials are becoming more and more significant in a wide range of applications. Numerous research has been conducted and still is going on to investigate the potential uses of carbon-based hybrid materials for diverse applications such as biosensing, bioimaging, smart drug delivery with the potential for theranostic or combinatorial therapies etc. This review is mainly focused on the classifications and synthesis of various types of CNMs and their electroanalytical application for development of efficient and ultra-sensitive electrochemical biosensors for the point of care diagnosis of fatal and severe diseases at their very initial stage. This review is mainly focused on the classification, synthesis and application of carbon-based material for biosensing applications. The integration of various types of CNMs with nanomaterials, enzymes, redox mediators and biomarkers have been used discussed in development of smart biosensing platform. We have also made an effort to discuss the future prospects for these CNMs in the biosensing area as well as the most recent advancements and applications which will be quite useful for the researchers working across the globe working specially in biosensors field.

A systematic review on the implementation of advanced and evolutionary biotechnological tools for efficient bioremediation of organophosphorus pesticides

Ever since the concept of bioremediation was introduced, microorganisms, microbial enzymes and plants have been used as principal elements for Organophosphate pesticide (OPP) bioremediation. The enzyme systems and genetic profile of these microbes have been studied deeply in past years. Plant growth promoting rhizobacteria (PGPR) are considered as one of the potential candidates for OPP bioremediation and has been widely used to stimulate the phytoremediation potential of plants. Constructed wetlands (CWs) in OPP biodegradation have brought new prospects to microcosm and mesocosm based remediation strategies. Application of synthetic biology has provided a new dimension to the field of OPP bioremediation by introducing concepts like, gene manipulation andediting, expression and regulation of catabolic enzymes, implementation of whole-cell based and enzyme based biosensor systems for the detection and monitoring of OPP pollution in both terrestrial and aquatic environment. System biology and bioinformatics tools have rendered significant knowledge regarding the genetic, enzymatic and biochemical aspects of microbes and plants thereby, helping researchers to analyze the mechanism of OPP biodegradation. Structural biology has provided significant conceptual information regarding OPP biodegradation pathways, structural and functional characterization of metabolites and enzymes, enzyme-pollutant interactions, etc. Therefore, this review discussed the prospects and challenges of most advanced and high throughput strategies implemented for OPP biodegradation. The review also established a comparative analysis of various bioremediation techniques and highlighted the interdependency among them. The review highly suggested the simultaneous implementation of more than one remediation strategy or a combinational approach creating an advantageous hybrid technique for OPP bioremediation.

Ultrasensitive detection of acephate based on carbon quantum dot-mediated fluorescence inner filter effects

Acephate is an organophosphorus pesticide (OP) that is widely used to control insects in agricultural fields such as in vegetables and fruits. Toxic OPs can enter human and animal bodies and eventually lead to chronic or acute poisoning. However, traditional enzyme inhibition and colorimetric methods for OPs detection usually require complicated detection procedures and prolonged time and have low detection sensitivity. High-sensitivity monitoring of trace levels of acephate residues is of great significance to food safety and human health. Here, we developed a simple method for ultrasensitive quantitative detection of acephate based on the carbon quantum dot (CQD)-mediated fluorescence inner filter effect (IFE). In this method, the fluorescence from CQDs at 460 nm is quenched by 2,3-diaminophenazine (DAP) and the resulting fluorescence from DAP at 558 nm is through an IFE mechanism between CQDs and DAP, producing ratiometric responses. The ratiometric signal I558/I460 was found to exhibit a linear relationship with the concentration of acephate. The detection limit of this method was 0.052 ppb, which is far lower than the standards for acephate from China and EU in food safety administration. The ratiometric fluorescence sensor was further validated by testing spiked samples of tap water and pear, indicating its great potential for sensitive detection of trace OPs in complex matrixes of real samples.

A scientometric study on application of electrochemical sensors for detection of pesticide using graphene-based electrode modifiers

Pesticide testing is an important topic in environmental protection and food safety. The development of green, accurate and reliable pesticide residue detection methods is an important technical support for implementing of agricultural quality supervision. Electrochemical sensors are a very promising analytical method for pesticide detection due to their high sensitivity, speed, low cost and portability. Performance enhancement of electrochemical sensors is often accompanied by research advances in materials science. Among them, carbon material is a very important electrode material for the fabrication of electrochemical sensors. The discovery of graphene makes it the most promising candidate among carbon materials for sensor performance enhancement. The topic of this review is the use of graphene-modified electrochemical sensors for pesticide detection in the last decade. Traditional literature summaries and bibliometric analyses were used for an in-depth analysis of this topic. In addition to the introduction of different sensor types and performance comparisons, this review also parses the authors' country, keywords and publication frequency. The related research experienced rapid growth several years ago and has now reached a relatively stable stage. We also discuss the perspectives on this topic.

Carbon nanomaterials for the detection of pesticide residues in food: A review

In agricultural fields, pesticides are widely used, but their residual presence in the environment poses a threat to humans, animals, insects, and ecosystems. The overuse of pesticides for pest control, enhancement of crop yield, etc. leaves behind a significant residual amount in the environment. Various robust, reliable, and reusable methods using a wide class of composites have been developed for the monitoring and controlling of pesticides. Researchers have discovered that carbon nanomaterials have a wide range of characteristics such as high porosity, conductivity and easy electron transfer that can be successfully used to detect pesticide residues from food. This review emphasizes the role of carbon nanomaterials in the field of pesticide residue analysis in different food matrices. The carbon nanomaterials including carbon nanotubes, carbon dots, carbon nanofibers, graphene/graphene oxides, and activated carbon fibres are discussed in the review. In addition, the review examines future prospects in this research area to help improve detection techniques for pesticides analysis.

Determination of organophosphorus in dairy products by graphitic carbon nitride combined molecularly imprinted microspheres with ultra performance liquid chromatography

•

An OPP-based molecularly imprinted microsphere was synthesized.

•

Composite material was synthesized by polymerizing the MIM on the surface of g-C₃N₄.

•

A novel SPE cartridge was prepared by using the composite material MIM/g-C₃N₄.

•

An SPE-UPLC method was developed for the detection of OPPs in dairy products.

Organophosphorus (OPPs) residues in dairy products are a potential threat to human health. To extract trace amounts of OPPs in dairy products, a graphitic carbon nitride (g-C₃N₄) was synthesized and combined with OPPs-based molecularly imprinted microspheres (MIM) to create a composite material (MIM/g-C₃N₄). Then, the MIM/g-C₃N₄ was used to prepare a solid phase extraction (SPE) cartridge to detect the OPPs in dairy products with UPLC method. The specific surface area of MIM/g-C₃N₄ was 172.208 m²/g, good thermal stability under 300℃, and could reuse up to 15 times. The four OPPs had good linear relationship within the range of 1–10000 ng/mL (r² > 0.999). The limits of detection were 0.7–2.6 ng/mL, and recoveries from blank dairy samples were 86.4 to 95.3 %. In this study, MIM combined with g-C₃N₄ was firstly utilized for the detection of OPPs in dairy products, which indicated it might be an ideal adsorbent for dairy products pretreatment.

Homogeneous photoelectrochemical biosensor for sensitive detection of omethoate via ALP-mediated pesticide assay and Bi2S3@Bi2Sn2O7 heterojunction as photoactive material

A simple homogeneous photoelectrochemical (PEC) sensing platform based on an alkaline phosphatase (ALP)-mediated pesticide assay was established for the sensitive detection of omethoate (OM). The Bi₂S₃@Bi₂Sn₂O₇ heterojunction was used as a photoactive material to provide stable background photocurrent signals. The inhibition of OM on ALP and PEC determination was carried out in the homogeneous system. In the absence of OM, dephosphorylation of L-ascorbic acid 2-phosphate trisodium salt (AAP) was catalyzed by ALP to produce the enzyme-catalyzed product (L-ascorbic acid, AA). AA, as an electron donor, could capture photogenerated holes on the Bi₂S₃@Bi₂Sn₂O₇ heterojunction, thus inhibiting the recombination of electron holes to achieve an increase of the photocurrent signal. When the OM was introduced, the enzyme activity of ALP was reduced due to the organophosphorus pesticides (OPs)-based enzyme inhibition, and the AA produced by catalytic hydrolysis was also reduced, thus reducing the photocurrent signal. Compared with the traditional PEC sensor for OPs, this homogeneous PEC sensor avoided immobilization procedures, covalent labeling, separation, and the steric hindrance effect caused by immobilized biomolecules, which achieved high recognition efficiency and caused a reduction in analysis time. Additionally, an ALP-mediated pesticide assay for the determination of OPs with a simplified experimental process further improved the stability and reproducibility of the PEC sensor. The PEC sensor showed high sensitivity to the target OM within a dynamic range of 0.05 ~ 500 ng mL^-1, and the detection limit was 0.0146 ng mL^-1. Additionally, the PEC biosensing system showed good selectivity and anti-interference ability, and exhibited a satisfactory result in spinach and mustard samples. A homogeneous PEC biosensor based on ALP inhibition strategy was constructed for OM detection in vegetable samples via Bi₂S₃@Bi₂Sn₂O₇ heterojunction as the photoactive substrate material.

Vanadium carbide MXene: as a reductant for the synthesis of gold nanoparticles and its biosensing application

Vanadium carbide MXene (V₂C) acts as a new type of two-dimensional (2D) graphene-like transition metal material that has attracted research interest. V₂C has been widely used in various fields due to its excellent physical and chemical properties. Herein, the self-assembled V₂C@gold nanoparticles (V₂C@AuNPs) are prepared by water bath process at 80 °C. With the addition of glutathione (GSH), the absorbance (Abs.) at 550 nm of V₂C@AuNPs was decreased. Therefore, an optical sensor is developed to detect GSH based on the properties of V₂C@AuNPs. Under the optimal conditions, the detection range is 1-32 µM and the detection limit is 0.099 µM. Furthermore, the proposed GSH sensor exhibits high sensitivity, high selectivity, strong stability, and excellent recovery. The work will expand the application of V₂C in biosensing.

New analytical strategies Amplified with 2D carbon nanomaterials for electrochemical sensing of food pollutants in water and soils sources

Pharmaceutical and food pollutants have threatened global health. Pharmacotherapy has left a positive impression in the field of health and life of people and animals. However, the many unresolved problems brought along with residues of pharmaceuticals in the environmental and food. Consumption of the world's freshwater resources, toxic chemicals, air pollution, plastic waste directly affects water and soil resources. Pesticides have a wide role in pollutants. Therefore, the determination of pesticides is significant to eliminate their negative effects on living things. Nowadays, there are many analytical methods available. However, new analysis methods are still being researched due to certain limitations of traditional methods. Electrochemical sensors have drawn attention because of their superior properties, such as short analysis time, affordability, high sensitivity, and selectivity. The development of new analytical strategies for assessing risks from pharmaceutical to food pollutants in water and soil sources is important for the measurement of different pollutants. Moreover, the 2D-carbon nanomaterials used in the development of electrochemical sensors are widely utilized to enlarge the surface area, increase porosity, and make easy immobilization. Graphene (graphene derivations) and carbon nanotubes integrated nanosensors are widely used for the determination of pesticides. 2D-carbon nanomaterials can be tailored according to the purpose of the study. The characterization and synthesis methods of 2D-carbon nanomaterials are widely explained. Furthermore, enzyme nanobiosensors, especially Acetylcholinesterase (AChE), are widely used to determine pesticides. The three main topics are focused on in this review: 2D-carbon nanomaterials, pesticides that threaten life, and the application of 2D-carbon nanomaterials-based electrochemical sensors. The various developed 2D-carbon nanomaterials-based electrochemical sensors were applied in pharmaceutical forms, fruits, tap/lake water, beverages, and soils sources. This work aims to indicate the recently published paper related to pesticide analysis and highlight the importance of 2D-nanomaterials on sensors.

Highly Sensitive Detection of Carbaryl Pesticides Using Potentiometric Biosensor with Nanocomposite Ag/r-Graphene Oxide/Chitosan Immobilized Acetylcholinesterase Enzyme

Novel, sensitive, selective, efficient and portable electrochemical biosensors are needed to detect residual contaminants of the pesticide 1-naphthyl methylcarbamate (carbaryl) in the environment, food, and essential biological fluids. In this work, a study of nanocomposite-based Ag reduced graphene oxide (rGO) and chitosan (CS) that optimise surface conditions for immobilisation of acetylcholinesterase (AChE) enzyme to improve the performance of catalytic biosensors is examined. The Ag/rGO/CS nanocomposite membrane was used to determine carbaryl pesticide using a potentiometer transducer. The AChE enzyme-based biosensor exhibits a good affinity for acetylthiocholine chloride (ATCl). It can catalyse the hydrolysis of ATCl with a potential value of 197.06 mV, which is then oxidised to produce a detectable and rapid response. Under optimal conditions, the biosensor detected carbaryl pesticide at concentrations in the linear range of 1.0 × 10−8 to 1.0 μg mL−1 with a limit of detection (LoD) of 1.0 × 10−9 μg mL−1. The developed biosensor exhibits a wide working concentration range, detection at low concentrations, high sensitivity, acceptable stability, reproducibility and simple fabrication, thus providing a promising tool for pesticide residue analysis.

Development of a noncompetitive magnetic-phage anti-immunocomplex assay for detecting of organophosphorus pesticides with a thiophosphate group

Organophosphorus pesticides (OPs) are widely used in agriculture and the monitoring of their residues is very important to protect human health. Immunoassays are important tools for the analysis of small molecules. Generally, noncompetitive mode of immunoassay is considered to be more sensitive than competitive mode. In this study, peptides that can identify immunocomplex of OPs were screened from a phage display library. Subsequently, a second-generation peptide library was constructed and peptides with better performance were isolated. Then, a rapid and sensitive noncompetitive magnetic-phage anti-immunocomplex assay (MPHAIA) for OPs was developed based on the best phage-peptide and single chain antibody immunomagnetic beads. The MPHAIA showed broad specificity for OPs with a thiophosphate group. The half-saturated concentration (SC₅₀) values and limits of detection (LODs) of MPHAIA to 12 OPs were ranged from 15.04 to 105.48 ng/mL and 4.07-14.19 ng/mL, respectively. The accuracy and reliability of MPHAIA were verified by gas chromatography-tandem mass spectrometry (GC-MS/MS) parallel analysis of six kinds of OPs in spiked cucumber samples. The recovery rates were in range of 81.2-116.3% with coefficient of variation from 4.1% to 14.1%, which were consistent with the results of GC-MS/MS.

A novel electrochemical sensing platform based on the esterase extracted from kidney bean for high-sensitivity determination of organophosphorus pesticides

An electrochemical sensing platform using kidney bean esterase as a new detection enzyme was proposed for organophosphorus pesticide determination. The determination of trichlorfon can be easily achieved with a LOD as low as 3 ng L−1 (S/N = 3).

Electrochemical biosensor based on CuPt alloy NTs-AOE for the ultrasensitive detection of organophosphate pesticides

The electrode material is vital for the performance of the electrochemical biosensor. Lately, many nanomaterials have been developed to improve the sensitivity and detection efficiency of the biosensors. In this work, a kind of one-dimensional nanomaterials, the CuPt alloy nanotubes with an open end (CuPt alloy NTs-AOE), was explored. The nanotubes with an open end can provide a larger electrochemical active surface area and more active sites for the immobilization of enzyme. The CuPt alloy displays excellent conductivity and catalytic activity. In addition, the Cu shows the great affinity to thio-compounds, which can greatly enhance the detection efficiency and sensitivity. As a result, the prepared biosensor demonstrates the wider linear range of 9.98 × 10^-10-9.98 × 10^-5g l^-1for fenitrothion and 9.94 × 10^-11-9.94 × 10^-4g l^-1for dichlorvos (as model OPs ) and with the lower detection limit of 1.84 × 10^-10g l^-1and 6.31 × 10^-12g l^-1(S/N = 3), respectively. Besides, the biosensor has been used to detect the real samples and obtains satisfactory recoveries (95.58%-100.56%).

Rapid and sensitive detection of Salmonella in milk based on hybridization chain reaction and graphene oxide fluorescence platform

Salmonella is a foodborne pathogen that has contributed to numerous food safety accidents worldwide, making it necessary to detect contamination at an early stage. A pair of specific primers based on the invA gene of Salmonella was designed for PCR. Target double-stranded DNA (dsDNA) from PCR was purified and denatured at high temperature to obtain target single-stranded DNA (ssDNA). Two carboxyfluorescein-labeled hairpin probes (H1-FAM and H2-FAM) were designed with complementary portions to the ssDNA sequence so that binding could trigger H1-FAM and H2-FAM hybridization chain reaction (HCR) to produce a long dsDNA complex. In this study, graphene oxide (GO) was used in the development of a homogeneous fluorescence detection platform for Salmonella. Using this HCR-GO assay platform, Salmonella detection was completed in 3.5 h. Salmonella was reliably and specifically detected with a limit of detection (LOD) of 4.2 × 10¹ cfu/mL in pure culture. Moreover, this new HCR-GO assay platform was successfully applied to the detection of Salmonella in artificially contaminated milk with a LOD of 4.2 × 10² cfu/mL.

A highly sensitive acetylcholinesterase electrochemical biosensor based on Au-Tb alloy nanospheres for determining organophosphate pesticides

Accurately detect the residues of organophosphate pesticides (OPs) in food and environment is critical to our daily lives. In this study, we developed a novel acetylcholinesterase (AChE) biosensor based on Au-Tb alloy nanospheres (NSs) for rapid and sensitive detection of OPs for the first time. Au-Tb alloy NSs that with good conductivity and biocompatibility were produced with a mild hydrothermal. Under optimal conditions, the AChE biosensor was obtained by a simple assembly process, with a big linear range (10^-13-10^-7M) and the limit of detection was 2.51 × 10^-14M for the determination of methyl parathion. Moreover, the determination of methyl parathion with the prepared biosensor presented a high sensitivity, outstanding repeatability and superior stability compared with other reported biosensors. Through the determination of tap water and Yanming lake samples, it was proved that the modified biosensor with satisfactory recoveries (96.76%-108.6%), and are realizable in the determination of OPs in real samples.

What Can Electrochemical Methods Offer in Determining DNA-Drug Interactions?

The interactions of compounds with DNA have been studied since the recognition of the role of nucleic acid in organisms. The design of molecules which specifically interact with DNA sequences allows for the control of the gene expression. Determining the type and strength of such interaction is an indispensable element of pharmaceutical studies. Cognition of the therapeutic action mechanisms is particularly important for designing new drugs. Owing to their sensitivity, simplicity, and low costs, electrochemical methods are increasingly used for this type of research. Compared to other techniques, they require a small number of samples and are characterized by a high reliability. These methods can provide information about the type of interaction and the binding strength, as well as the damage caused by biologically active molecules targeting the cellular DNA. This review paper summarizes the various electrochemical approaches used for the study of the interactions between pharmaceuticals and DNA. The main focus is on the papers from the last decade, with particular attention on the voltammetric techniques. The most preferred experimental approaches, the electrode materials and the new methods of modification are presented. The data on the detection ranges, the binding modes and the binding constant values of pharmaceuticals are summarized. Both the importance of the presented research and the importance of future prospects are discussed.