Efficient and selective adsorption of cationic dyes with regenerated cellulose

Regulating natural galactomannan into composite hydrogels for improved adhesion, anti-swelling capability and efficient dye pollution removal

Constructing bio-based composite hydrogel materials are receiving much interest, while regulating the interactions of the hydrogel components and integrating functions for multi-application meet various challenges. Herein, composite hydrogels were prepared by cross-linking of poly-acrylamide (PAM) and poly-N-[3-(Dimethylamino) propyl] acrylamide (PDMAPAA), assisted by natural galactomannan (GM) regulation. Even distribution and compatibility of GM in the three-dimensional materials were proved by a series of chemical and morphological characterizations, which favored the improvement of mechanical properties (~80 kPa) and flexibility. Besides, the hydrogels were well-connected with double networks of noncovalent intermolecular hydrogen bonding interactions and hydrophobic interactions, in addition to covalent-linked polymers. Due to great amount of inner hydrogen bond linkages, the hydrogels present satisfying anti-swelling capabilities (<15 %), exhibiting high potential for application in water treatment. Meanwhile, abundant surface functional groups provided possibilities to form interactive layer with the various substrates surface, exhibiting highly adhesive properties. Significant dyes adsorption capabilities were revealed on the hydrogels according to the electrostatic attraction with Congo red and hydrogen bond interactions with Brilliant green respectively. Thus, the proposed composite hydrogels integrated multi-functions due to the tuning the surface groups and cross-linking interactions, which provided deeper understanding on bio-based materials on fields of water treatment and environmental protection.

Multiporous ZIF-8 carbon/cellulose composite beads: Highly efficient and scalable adsorbents for water treatment

Metal-organic framework (MOF) particles are one of the most promising adsorbents for removing organic contaminants from wastewater. However, powder-type MOF particles face challenges in terms of utilization and recovery. In this study, a novel bead-type adsorbent was prepared using activated carbon based on the zeolitic imidazolate framework-8 (AC-ZIF-8) and a regenerated cellulose hydrogel for dye removal. AC-ZIF-8 particles with a large surface area were obtained by carbonization and chemical activation with KOH. The AC-ZIF-8 powders were efficiently immobilized in hydrophilic cellulose hydrogel beads via cellulose dissolution/regeneration. The prepared AC-ZIF-8/cellulose hydrogel (AC-ZIF-8/CH) composite beads exhibit a large specific surface area of 1412.8 m2/g and an excellent maximum adsorption capacity of 565.13 mg/g for Rhodamine B (RhB). Moreover, the AC-ZIF-8/CH beads were effective over a wide range of pH, temperatures and for different types of dyes. These composite beads also offer economic benefits through desorption of dyes for recycling. The AC-ZIF-8/CH beads can be produced in substantial amounts and used as fillers in a fixed-bed column system, which can purify the continuous inflow of dye solutions. These findings suggest that our simple approach for preparing high-performance adsorbent beads will broaden the application of dye adsorbents, oil-water separation, and catalysts.

Removal of glyphosate (GLY) and aminomethylphosphonic acid (AMPA) by ultrafiltration with permeate-side polymer-based spherical activated carbon (UF-PBSAC)

Glyphosate (GLY) is the most commonly used herbicide worldwide, and aminomethylphosphonic acid (AMPA) is one of its main metabolites. GLY and AMPA are toxic to humans, and their complex physicochemical properties present challenges in their removal from water. Several technologies have been applied to remove GLY and AMPA such as adsorption, filtration, and degradation with varied efficiencies. In previous works, an ultrafiltration membrane with permeate-side polymer-based spherical activated carbon (UF-PBSAC) showed the feasibility of removing uncharged micropollutants via adsorption in a flow-through configuration. The same UF-PBSAC was investigated for GLY and AMPA adsorption to assess the removal of charged and lower molecular weight micropollutants. The results indicated that both surface area and hydraulic residence time were limiting factors in GLY/AMPA adsorption by UF-PBSAC. The higher external surface of PBSAC with strong affinity for GLY and AMPA showed higher removal in a dynamic process where the hydraulic residence time was short (tens of seconds). Extending hydraulic residence times (hundreds of seconds) resulted in higher GLY/AMPA removal by allowing GLY/AMPA to diffuse into the PBSAC pores and reach more surfaces. Enhancement was achieved by minimising both limiting factors (external surface and hydraulic residence time) with a low flux of 25 L/m2.h, increased PBSAC layer of 6 mm, and small PBSAC particle size of 78 µm. With this configuration, UF-PBSAC could remove 98 % of GLY and 95 % of AMPA from an initial concentration of 1000 ng/L at pH 8.2 ± 0.2 and meet European Union (EU) regulation for herbicides (100 ng/L for individuals and 500 ng/L for total herbicides). The results implied that UF-PBSAC was able to remove charged micropollutants to the required levels and had potential for application in wastewater treatment and water reuse.

Magnetic nanocellulose-based adsorbent for highly selective removal of malachite green from mixed dye solution

Herein, a novel magnetic adsorbent (BC/AA/MN@Fe3O4) was successfully prepared from waste bamboo fiber tissue and montmorillonite, and subsequently applied for the highly selective removal of malachite green (MG, removal efficiency = 97.3 %) from the mixed dye solution of MG with methyl orange (MO, removal efficiency = 4.5 %). The magnetic adsorbent has a high porosity with abundant mesopores. In the single dye MG solution, the adsorbent could effectively remove MG over a wide pH range from 4 to 10, and the maximum adsorption capacity (qmax) was 2282.3 mg/g. Moreover, the magnetic adsorbent could remove MG from various solutions including mixed dye solution, high salinity solution, and real river water dye solution. The thermodynamic results proved that the adsorption process of MG was spontaneous and endothermic. The adsorption of MG was due to the comprehensive effects of electrostatic attraction, hydrogen bonding interactions and ions exchange, between the adsorbent and MG. Furthermore, the BC/AA/MN@Fe3O4 exhibited an excellent reusability with adsorption efficiency above 53.4 % after five consecutive cycles. Therefore, the prepared magnetic nanocellulose-based adsorbent was expected to be a promising material for highly selective adsorption and separation of MG from mixed dye solution.

Selective adsorption and separation of methylene blue by facily preparable xanthan gum/amantadine composites

In this work, xanthan gum-based composites were successfully graft-modified by amantadine (XG-Fe³⁺/AM) with higher adsorption capacity and selectivity on recycling cationic dye (methylene blue, MB) from aqueous solution. The adsorption equilibrium of MB could be achieved approximately within 5 min when the initial concentration was 100 mg/L, and the maximum adsorption capacity was up to 565 mg/g. After 5 desorption-regeneration cycles, the removal rate of XG-Fe³⁺/AM for MB could still be as high as 95 % with slight decrement. Additionally, the effects of pH, contact time, temperature and initial dye concentration on the adsorption performance of MB were systematically examined. Furthermore, the adsorbent was characterized by FT-IR, BET and XPS analysis. In mixed anionic and cationic dyes, the adsorption selectivity of XG-Fe³⁺/AM on MB in the mixture of MB and methyl orange (MO) reached up to 99.69 %. Molecular dynamics simulation revealed that the trend of adsorption energy for dyes was in good agreement of the experimental order of adsorption capacities and molecular sizes among seven anionic and cationic dyes based on molecular matching effect and electrostatic interaction. Therefore, XG-Fe³⁺/AM is an eco-friendly, facile-synthesis and high-selectivity adsorbent, which remove cationic dyes in multi-component systems through electrostatic interaction and molecular matching effect.

Green synthesis of magnetic activated carbon from peanut shells functionalized with TiO2 photocatalyst for Batik liquid waste treatment

The composite of magnetic activated carbon derived from peanut shells functionalized titanium dioxide (Fe3O4/TiO2/AC) has been successfully synthesized. The composite was employed to remove indigosol green and Cr(vi) under ultraviolet (UV) and visible light. In this work, the activated carbon was synthesized from a sustainable source of peanut shell by carbonization and activation method employing NaOH as the activating agent. Magnetite was prepared by chemical co-precipitation technique using FeCl3·6H2O and FeSO4·7H2O, and then, the deposition of TiO2 was performed under ultrasonic irradiation. A variety of material characterization, consisting of Fourier transform infrared, X-ray diffraction, and scanning electron microscopy-energy dispersive X-ray, was used to analyze the physicochemical properties of the composite. The effects of pH, irradiation time, and composite mass during optimization performance were investigated. The characterizations represent the dispersed TiO2 in the anatase phase with the existence of magnetic particles. The activity tests revealed the superiority of the composite for applications involving adsorption and photocatalysis under visible light source compared to UV light. It was found that Fe3O4/TiO2/AC yields the efficiency for the removal of indigosol green and Cr(vi) from Batik liquid waste of 92.91 and 76.92%, respectively.

Cellulose nanofibers/PVA blend polymeric beads containing in-situ prepared magnetic nanorods as dye pollutants adsorbents

Magnetic beads were developed from polyvinyl alcohol and different amounts of cellulose nanofibers (CNF) by in-situ preparation of iron oxide nanoparticles in an alkaline aqueous medium at room temperature. The CNF were isolated from wheat straw, whereas the magnetic nanoparticles (MNPs) precursors were simple iron salts. The complete characterization of all the obtained materials was conducted, and among some other outstanding results it showed that all the components were strongly interacting via hydrogen bonding, while the nano-rods and husks like MNPs were effectively acting as crosslinking dots. All the prepared materials had good magnetic responses, and they were able to remove not only cationic, but also anionic dye pollutants from aqueous model solutions.