Preparation of multicolor carbon dots with high fluorescence quantum yield and application in white LED

Electroluminescent and photoluminescent light-emitting diodes from carbon dots and device architecture optimization

Light emission from carbon dots (CDs) is of great interest in both electroluminescence and photoluminescence. Herein, we construct electroluminescent and photoluminescent light-emitting diodes (LEDs) from emitters of CDs. The electroluminescent LED with host-guest-doped dual emissive layers (EMLs) of [poly(9-vinylcarbazole) (PVK)-CDs] × 2 gives satisfactory electro-optical properties, with maximum luminance of 560 cd m-2 at 16 V, luminous efficiency of 0.183 cd A-1, power efficiency of 0.082 lm W-1, and external quantum efficiency of 0.25%, which are superior to the counterparts with single-EML of CDs, single-EML of [PVK-CDs], and triple-EMLs of [PVK-CDs] × 3. These enhanced properties are rationally ascribed to optimization of the device architecture, carrier balance improvement, and reduction in concentration-induced quenching. The electroluminescent LEDs also show color evolution from PVK to CDs, and/or to the PVK/CDs interface, with increasing driving voltages, owing to incomplete energy transfer from PVK to CDs. Highly efficient photoluminescent LEDs with 365- and 395-nm UV excitation are demonstrated. With a CDs : polyvinyl pyrrolidone ratio of 1 : 3, the 365-nm excited photoluminescent LED gives a maximum luminance of 512 347 cd m-2 with a power efficiency of 25.2 lm W-1, while the 395-nm excited photoluminescent device gives a maximum luminance of 670 954 cd m-2 with a power efficiency of 22.0 lm W-1, with both showing yellow emission. Our experiments provide some new ideas for broadening CD applications and advancing LEDs.

High-brightness green CdSe/ZnS quantum dots stimulated by solar-blind deep-ultraviolet light in optical wireless communications

Ultraviolet-based optical wireless communication (OWC) is emerging as a significant technology for the next-generation secure communication, particularly within the solar-blind spectra. In this study, we have synthesized two types of green-emitting II-VI family colloidal quantum dots (QDs), specifically ZnCdSe/ZnS and CdSe/CdZnS/ZnS QDs, which are stimulated by ultraviolet (UV) and solar-blind deep-ultraviolet (DUV) light, respectively. With a transmission distance of 1.5 m, the maximum data rate of ZnCdSe/ZnS QDs reaches 40 Mb/s, which is below the forward-error-correction (FEC) limit (3.8 × 10-3) when excited by 385-nm UV light. However, both brightness and bit error rate are significantly deteriorated when excited by 280-nm DUV light. Conversely, 28 and 24 Mb/s were attained using CdSe/CdZnS/ZnS QDs under UV and DUV excitation, respectively. Our studies on light-conversion and communication capabilities of green QDs within the DUV OWC system may provide valuable insights for subsequent research in the field.

One-step solvothermal synthesis of full-color fluorescent carbon dots for information encryption and anti-counterfeiting applications

Multicolor fluorescent carbon dots (CDs) have received extensive attention due to their excellent fluorescence tunable performance. In this study, multicolor CDs with color tunable and high fluorescence quantum yields (QYs) were successfully prepared under the same conditions by a one-step solvothermal method using 2-aminoterephthalic acid (ATA) and Nile Blue A (NBA) as reaction reagents, achieving a wide color field coverage. Detailed studies on the relevant mechanisms have been carried out for blue, green and red CDs, indicating that the regulating mechanism of multicolor luminescence is determined by the size of the sp2 conjugated domains, which is due to the increase of particle size that causes an increase in the size of the sp2 conjugated domains, resulting in the narrowing of the band gap and the red-shift of the emission wavelength. It was found that the CDs have the advantages of simple preparation, high photostability and high quantum yield. They were used as fluorescent ink and mixed with polyvinyl alcohol (PVA) to form CD/PVA composites, which were successfully applied in the field of information encryption and anti-counterfeiting. This work provides a new strategy for the synthesis of panchromatic tunable fluorescent CDs and their application in the field of information encryption and anti-counterfeiting.

Core-shell structure DA-CDs/AuNPs for the recognition of fenamidone by surface-enhanced Raman scattering

In this work, a facile synthesis method for dopamine carbon dots-based Au nanoparticles (DA-CDs/AuNPs) by seed gold method was reported as the surface enhanced Raman scattering (SERS) booster. DA-CDs with rich in surface functional groups was synthesized using dopamine, citric acid and ethylenediamine as precursors by a facile hydrothermal method, and can be used as the capping agents and reducing agents for the synthesis of DA-CDs/AuNPs. Due to the electromagnetic "hot spots" effect, DA-CDs/AuNPs with core-shell structure exhibited strong SERS activity. Based on the specific interaction of DA-CDs/AuNPs and fenamidone, a detection method of fenamidone was established with a low detection limit of 0.05 μg/mL. Finally, the SERS sensor was successfully applied to the detection of fenamidone in fruit with recoveries between 90.6 % and 98.7 %. The method here proposed can be reliably applied for fenamidone detection on fruits.

Carbon dots as potential candidate for photocatalytic treatment of dye wastewater

Water is the utmost important element for the existence of life. In recent decades, water resources have become highly contaminated by a variety of pollutants, especially toxic dyes that are harmful to both living beings and environment. Hence, there is an urgent need to develop more effective methods than traditional wastewater treatment approaches for treatment of hazardous dyes. Herein, we have addressed the various aspects related to the effective and economically feasible method for photocatalytic degradation of these dyes employing carbon dots. The photocatalysts based on carbon dots including those mediated from biomass have many superiorities over conventional methods such as utilization of economically affordable, non-toxic, rapid reactions, and simple post-processing steps. The current study will also facilitate better insight into the understanding of photocatalytic treatment of dye-polluted wastewater for future wastewater treatment studies. Additionally, the possible mechanistic pathways of photocatalytic dye decontamination, several challenges, and future perspectives have also been summarized.

Advancing glioblastoma imaging: Exploring the potential of organic fluorophore-based red emissive carbon dots

Over time, the interest in developing stable photosensitizers (PS) which both absorb and emit light in the red region (650 and 950 nm) has gained noticeable interest. Recently, carbon dots (CDs) have become the material of focus to act as a PS due to their high extinction coefficient, low cytotoxicity, and both high photo and thermal stability. In this work, a Federal and Drug Association (FDA) approved Near Infra-Red (NIR) organic fluorophore used for photo-imaging, indocyanine green (ICG), has been explored as a precursor to develop water-soluble red emissive CDs which possess red emission at 697 nm. Furthermore, our material was found to yield favorable red-imaging capabilities of glioblastoma stem-like cells (GSCs) meanwhile boasting low toxicity. Additionally with post modifications, our CDs have been found to have selectivity towards tumors over healthy tissue as well as crossing the blood-brain barrier (BBB) in zebrafish models.

Blue, Yellow, and Red Carbon Dots from Aromatic Precursors for Light-Emitting Diodes

In this work, multicolor fluorescent carbon dots with red (R-CDs), yellow (Y-CDs), and blue (B-CDs) emissions were prepared by choosing proper aromatic precursors with different amounts of benzene rings through a simple solvothermal method. The characterization showed that the prepared carbon dots were spherical with a size under 10 nm, rich surface functional groups, and good stability. The emission wavelengths were located at 440, 530, and 580 nm under the excitation of 370 nm. The relative fluorescence quantum yield (QY) of R-CDs, Y-CDs, and B-CDs was 11%, 59%, and 33%, respectively. The related characterization demonstrated that the redshift in the photoluminescence was caused by the synergistic effect of the increasing graphitic nitrogen content, quantum size effect and surface oxidation state. By mixing the three prepared CDs into a PVA matrix, the transparent and flexible films produced relucent blue, yellow, and red emissions under 365 nm UV light, and solid-state quenching was effectively avoided. LEDs were fabricated by using B-CDs, Y-CDs, and R-CDs/PVA with a semiconductor chip. These CDs-based LEDs produced bright blue, yellow, and red light with CIE color coordinates of (0.16, 0.02), (0.38, 0.58), and (0.50, 0.49) were successfully manufactured utilizing the prepared blue, yellow and red multicolor carbon dots as the solid luminescent materials. The results showed that the synthesized CDs can be potentially applied in multi-color monitors as a promising candidate for light-emitting diodes (LEDs). This work blazes a novel trail for the controllable preparation of multicolor fluorescent carbon dots.

One-Pot Synthesis of Dual Color-Emitting CDs: Numerical and Experimental Optimization towards White LEDs

Carbon Dots (CDs) are fluorescent carbon-based nanoparticles that have attracted increasing attention in recent years as environment-friendly and cost-effective fluorophores. An application that can benefit from CDs in a relatively short-term perspective is the fabrication of color-converting materials in phosphor-converted white LEDs (WLEDs). In this work we present a one-pot solvothermal synthesis of polymer-passivated CDs that show a dual emission band (in the green and in the red regions) upon blue light excitation. A purposely designed numerical approach enables evaluating how the spectroscopic properties of such CDs can be profitable for application in WLEDs emulating daylight characteristics. Subsequently, we fabricate nanocomposite coatings based on the dual color-emitting CDs via solution-based strategies, and we compare their color-converting properties with those of the simulated ones to finally accomplish white light emission. The combined numerical and experimental approach can find a general use to reduce the number of experimental trial-and-error steps required for optimization of CD optical properties for lighting application.

Color Conversion Light-Emitting Diodes Based on Carbon Dots: A Review

This paper reviews the state-of-the-art technologies, characterizations, materials (precursors and encapsulants), and challenges concerning multicolor and white light-emitting diodes (LEDs) based on carbon dots (CDs) as color converters. Herein, CDs are exploited to achieve emission in LEDs at wavelengths longer than the pump wavelength. White LEDs are typically obtained by pumping broad band visible-emitting CDs by an UV LED, or yellow-green-emitting CDs by a blue LED. The most important methods used to produce CDs, top-down and bottom-up, are described in detail, together with the process that allows one to embed the synthetized CDs on the surface of the pumping LEDs. Experimental results show that CDs are very promising ecofriendly candidates with the potential to replace phosphors in traditional color conversion LEDs. The future for these devices is bright, but several goals must still be achieved to reach full maturity.

Waste to white light: a sustainable method for converting biohazardous waste to broadband white LEDs

The Covid-19 pandemic has generated a lot of non-degradable biohazardous plastic waste across the globe in the form of disposable surgical and N95 masks, gloves, face shields, syringes, bottles and plastic storage containers. In the present work we address this problem by recycling plastic waste to single system white light emitting carbon dots (CDs) using a pyrolytic method. The synthesized CDs have been embedded into a transparent polymer to form a carbon dot phosphor. This CD phosphor has a broad emission bandwidth of 205 nm and is stable against photo degradation for about a year. A white LED with CRI ∼70 and CIE co-ordinates of (0.25, 0.32) using the fabricated CD phosphor is reported. Further our phosphor is scalable and is environmentally sustainable, and will find wide application in next generation artificial lighting systems.

Facilely synthesized carbon dots and configurated light-emitting diodes with efficient electroluminescence

High-quality carbon dots are facilely synthesized and serve as emitters of light-emitting diodes with efficient electroluminescence.