Indications and Controversies in Lipofilling for Partial Breast Reconstruction

Breast Lipofilling: Is the Bra Really Full? Clinical Bra Pressure Measurement and In Vitro Testing of Processed and Unprocessed Fat Cells

BACKGROUND

Breast lipofilling, a popular cosmetic and reconstructive procedure, involves the transplantation of autologous fat to enhance breast volume and contour. Despite its widespread use, cell processing and the aftertreatment remain controversial. This study investigates the pressure applied by a compression bra and reports in vitro stress tests of processed and unprocessed fat cells.

METHODS

Clinical bra pressure measurements were conducted on a cohort of 45 patients following lipofilling, reduction mammoplasties and DIEP flaps. Laboratory analysis included cell vitality testing using Resazurin assays of processed and unprocessed fat cells after exposure to mechanical or hyperbaric pressure.

RESULTS

Our findings show a mean overall pressure value of the compression bra for all patients of 6.7 ± 5.7 mmHg (range 0-35). Cell processing is superior to sedimentation only regarding fat cell vitality. However, neither mechanical pressure within the specified range nor hyperbaric oxygen exposure significantly affected fat graft survival as measured by Resazurin assays.

CONCLUSION

The in vitro measurements showed that it was impossible to harm fat cells with external pressure during lipofilling procedures, regardless of their processing. In the clinical context, the compression bra applied pressure values deceeding the perfusion pressure and may therefore not diminish oxygen supply nor harm the transplanted cells. Therefore, we recommend the use of a compression bra for all lipofilling procedures around the breast.

LEVEL OF EVIDENCE III

This journal requires that authors assign a level of evidence to each article. For a full description of these evidence-based medicine ratings, please refer to Table of Contents or online Instructions to Authors www.springer.com/00266.

[Breast restoration by the lipomodeling technique after breast sequelae following complications of reduction mammoplasty]

BACKGROUND

Complications of reduction mammoplasty can lead to aesthetic sequelae, which are known to be difficult and delicate to treat, and only a few articles deal with this subject.

PURPOSE

The objective of this article is to present and analyze our experience of lipomodeling for the secondary management of aesthetic sequelae occurring after a complication of reduction mammoplasty.

MATERIAL AND METHODS

An uniform and consecutive series of 22 female patients, operated with the lipomodeling technique from December 2003 to March 2019 by the last author, to correct aesthetic sequelae after secondary complications of reduction mammoplasty was studied analyzing the efficiency and the tolerance of this technique.

RESULTS

The results showed 86.4% of very good results and 13.6% of good results. Seventeen patients (77.3%) were highly satisfied with the postoperative outcome, and 5 patients were satisfied (22.7%). The number of procedures varied from 1 to 3: 15 patients (68.2%) underwent only one session of lipomodeling, 5 patients (22.7%) underwent two sessions, and 2 patients (9.1%) underwent three sessions. The mean time between two interventions was 4 months (3-12). No patient of this series initiates any medico-legal proceeding towards the first surgeon.

CONCLUSION

After this study, lipomodeling, in association with ancillary procedures, seems to be an effective and safe solution to correct aesthetic sequelae following secondary complications of reduction mammoplasty. It should have a key role for the correction of these sequelae. An effective and appropriate care of these patients leads to good results and patients' final satisfaction, and manages to avoid any medico-legal proceeding, always badly lived as much for the patient as for the first surgeon.

The effect of radiotherapy on fat engraftment for complete breast reconstruction using lipofilling only

PURPOSE

Lipofilling has been established as a standard technique for contour enhancement following breast reconstruction. However, there is a paucity in current literature regarding the use of this technique for complete reconstruction of the female breast as an alternative to conventional techniques, such as expander or flap-based procedures. In particular, the influence of pre-operative irradiation for successful reconstruction has rarely been examined in published studies. Here, the authors describe their experience with successful fat injection in pre-radiated breasts in comparison with non-pre-radiated patients.

METHODS

In this retrospective study, we examined a total of 95 lipofilling treatments on 26 patients (28 breasts). All of them experienced mastectomy following breast cancer; local breast defects after partial resection of the gland were not included in this study. In total, 47 lipofilling procedures in 12 non-irradiated patients (14 breasts) and 48 procedures in 14 irradiated women (also 14 breasts) were performed. Per session, approximately 297 ± 112 cc of adipose tissue was grafted in group A (no radiotherapy) and approximately 259 ± 93 cc was grafted in group B (radiotherapy).

RESULTS

Among the group of women without pre-operative radiation, 71% of breast reconstructions limited to lipofilling only showed constant engraftment of fat tissue with a successful reconstructive result, whereas only 21% of the patients with pre-radiated breasts showed complete reconstruction of the breast with a permanent fat in-growth.

CONCLUSION

Preoperative radiotherapy significantly impedes successful completion of breast reconstructions planned only by autologous fat transfer. Patients should be selected individually and carefully for complete breast reconstruction using lipofilling only.

Review of 107 Oncoplastic Surgeries Using an Acellular Dermal Matrix with the Round Block Technique

The round block technique (RBT) is an oncoplastic surgery method that uses volume displacement techniques after partial mastectomy. However, cosmetic problems occur after tissue rearrangement in patients with small breasts or those in whom a large amount of breast tissue is excised. Therefore, we used an acellular dermal matrix (ADM) when the volume was insufficient after tissue rearrangement. Patients who underwent breast reconstruction using the ADM with the RBT after breast-conserving surgery (BCS) were included. The ADM graft was performed in two layers. First, it was placed on the glandular flap, and the patient was then seated to ascertain the degree of deformity. If the volume was insufficient, a graft was also performed under the skin flap. Overall, 107 oncoplastic surgeries were performed. Tumors were most commonly located in the upper outer quadrant of the breast, and the mean resected breast tissue was 27.1 g. Seroma was the most common complication, but it improved with several aspirations. There were no major complications or cosmetic problems requiring reoperation. Therefore, if the ADM was used for defects that could not be reconstructed with the RBT alone, safe and cosmetically good results could be obtained.

UK Guidelines for Lipomodelling of the Breast on behalf of Plastic, Reconstructive and Aesthetic Surgery and Association of Breast Surgery Expert Advisory Group

Lipomodelling has become increasingly popular for reconstructive, aesthetic and therapeutic indications. The guidelines summarise available evidence for indications, training, technique, audit and outcomes in lipomodelling and also highlight areas for further research.

Cellulosic/Polyvinyl Alcohol Composite Hydrogel: Synthesis, Characterization and Applications in Tissue Engineering

The biomedical field still requires composite materials for medical devices and tissue engineering model design. As part of the pursuit of non-animal and non-proteic scaffolds, we propose here a cellulose-based material. In this study, 9%, 18% and 36% dialdehyde-functionalized microcrystalline celluloses (DAC) were synthesized by sodium periodate oxidation. The latter was subsequently coupled to PVA at ratios 1:2, 1:1 and 2:1 by dissolving in N-methyl pyrrolidone and lithium chloride. Moulding and successive rehydration in ethanol and water baths formed soft hydrogels. While oxidation effectiveness was confirmed by dialdehyde content determination for all DAC, we observed increasing hydrolysis associated with particle fragmentation. Imaging, FTIR and XDR analysis highlighted an intertwined DAC/PVA network mainly supported by electrostatic interactions, hemiacetal and acetal linkage. To meet tissue engineering requirements, an interconnected porosity was optimized using 0-50 µm salts. While the role of DAC in strengthening the hydrogel was identified, the oxidation ratio of DAC showed no distinct trend. DAC 9% material exhibited the highest indirect and direct cytocompatibility creating spheroid-like structures. DAC/PVA hydrogels showed physical stability and acceptability in vivo that led us to propose our DAC 9%/PVA based material for soft tissue graft application.

Oncoplastic breast surgery: A guide to good practice

Oncoplastic Breast Surgery has become standard of care in the management of Breast Cancer patients. These guidelines written by an Expert Advisory Group; convened by the Association of Breast Surgery (ABS) and the British Association of Plastic, Reconstructive and Aesthetic Surgeons (BAPRAS), are designed to provide all members of the breast cancer multidisciplinary team (MDT) with guidance on the best breast surgical oncoplastic and reconstructive practice at each stage of a patient's journey, based on current evidence. It is hoped they will also be of benefit to the wide range of professionals and service commissioners who are involved in this area of clinical practice.

Biological Morphogenetic Surgery: A Minimally Invasive Procedure to Address Different Biological Mechanisms

We present a methodology called biological morphogenetic surgery (BMS) that can recover (enlarge or reduce) the shape/volume of anatomic structures/tissues affected by congenital or acquired malformations based on a minimally invasive procedure. This emerges as a new concept in which the main task of surgery is the biological modulation of different remodeling and repair mechanisms. When applied, for example, to a tuberous breast deformity, the "enlarging BMS" expands the retracted tissue surrounding the gland through a cutting tip of a needle being inserted through small incisions percutaneously, accounting for the biological activity of the grafted fat. The obtained spaces might be spontaneously occupied and later filled with autologous grafted fat, which promotes tissue expansion by eliciting adipogenesis and preventing fibrosis. The "reducing BMS" creates an interruption of the contact between the derma and the hypoderma of the abnormally large areola and then promotes adipocytes to induce a fibrotic reaction, leading to areola reduction. Current evidence suggests that BMS might induce a bivalent mesenchymalization of the adipocyte, which promotes either new adipogenesis and angiogenesis of local fat (expanding BMS) or the granulation tissue/fibrotic response (reducing BMS), thus leading to the physiological recovery of the affected structures/tissues to normality. Level of Evidence: 4.

[Lipomodeling in breast reconstruction]

Breast Lipomodeling, or Breast Lipofilling, consists in performing a graft of fatty tissue, from an area of the lower body, and moving it to the breast. This method, initially decried, has progressively taken a major place in breast reconstruction. Preoperative information is important: information must be given verbally and also by information forms from the French for French Society of Plastic, Reconstructive and Aesthetic Surgery (SOFCPRE) that can be downloaded from www.plasticiens.org. After the infiltration of adrenalized serum (1mg of adrenaline in 500mL of physiological serum), taking the fatty tissue requires a fine canula, and, non traumatically, applying a light vacuum to the syringe. The tissue is then prepared by a short centrifugation (15s at 3200rotations/s). The transfer has to be done by gently placing fine "fatty spaghettis" in the entire reconstructed breast (3D network). On the end of the fat transfer, fasciotomies are realized to free the fibrous tracts, and 30 to 50mL of tissue are added. The indications of this technique are many. Lipomodeling has progressively taken the center stage in breast reconstruction, and can be applied in addition to all reconstruction techniques. The indication of exclusive lipomodeling are much rarer: patient with very small breast and important steatomery. Ultimately, breast lipomodeling has provided a remarkable solution for the approach of the sequelae of conservative treatment in breast cancer. Finally, lipomodeling of the breast is a major advance in breast reconstruction. It has significantly improved the quality of breast reconstructions, whether autologous, or in combination with a prosthesis.