Patient Evaluation and Indications for Osteotomy Around the Knee

Effects of three-dimensional femur and tibia postures on the parameters of standing long-leg radiographs for osteoarthritic knees in elderly female subjects

BACKGROUND

Long-leg frontal radiographs of the lower extremities are used to assess knee osteoarthritis. Given the three-dimensional (3D) nature of alignment changes in osteoarthritis, postural alterations in the femur and tibia extend beyond the coronal plane (in-plane) to include the transverse and sagittal planes (out-of-plane). This study investigates the impact of these out-of-plane factors on in-plane knee alignment parameters observed in frontal radiographs.

METHODS

A total of 97 osteoarthritic knees in women were examined. Using a 3D-to-two-dimensional (2D) image matching technique, we evaluated the 3D postures of the femur and tibia in the standing position as viewed from frontal radiographs in the world coordinate system. Statistical analyses were conducted to explore associations between these 3D postures and 2D alignment parameters obtained from frontal radiographs under identical conditions.

FINDINGS

The femur exhibited a medial inclination of 2.7°, a posterior inclination of 3.9°, and an internal rotation of 4.2°, whereas the tibia showed a lateral inclination of 6.4°, an anterior inclination of 6.7°, and an internal rotation of 6.7°. Both coronal and rotational postures of femur and tibia influenced the hip-knee-ankle angle, mechanical axis percentage, and medial proximal tibial angle. However, only coronal factors of tibia impacted tibial joint line obliquity relative to the floor.

INTERPRETATION

Attention should be paid to the potential impact of the out-of-plane postures of the femur and tibia on parameters assessed in plain frontal radiographs of the lower extremities.

High Tibial Osteotomy in Knee Reconstruction and Joint Preservation

High tibial osteotomy is a dynamic operation, used as an effective procedure in both joint preservation and knee stability. Applications and indications are expanding, with good results in the treatment of malalignment associated with arthrosis, knee instability, meniscus deficiency or transplants, and/or cartilage restoration. Appropriate patient selection and preoperative planning are critical to achieving good outcomes after surgery. Coronal and sagittal plane corrections made through the proximal tibia can effectively alter joint mechanics creating a more favorable environment for cartilage, meniscus, and ligamentous structures about the knee. Advancing techniques and technologies have allowed for more precise planning and execution of osteotomies.

Advancements in health informatics: finite element insights into medial open-wedge high tibial osteotomy and lateral meniscal tears

Knee medial compartment osteoarthritis is effectively treated by a medial open-wedge high tibial osteotomy (MOWHTO). The feasibility and safety of MOWHTO for mild lateral meniscal tears are unknown. This study examined the feasibility and safety of knee joint weight-bearing line ratio (WBLr) adjustment during MOWHTO with lateral meniscal injuries. We used a healthy adult male's lower extremities computed tomography scans and knee joint magnetic resonance imaging images to create a normal fine element (FE) model. Based on this model, we generated nine FE models for the MOWHTO operation (WBLr: 40-80%) and 15 models for various lateral meniscal injuries. A compressive load of 650N was applied to all cases to calculate the von Mises stress (VMS), and the intact lateral meniscus' maximal VMS at 77.5% WBLr was accepted as the corrective upper limit stress. Our experimental results show that mild lateral meniscal tears can withstand MOWHTO, while severe tears cannot. Our findings expand the use of MOWHTO and provide a theoretical direction for practical decisions in patients with lateral meniscal injuries.

Effects of high tibial osteotomy compared with unicondylar knee arthroplasty on the surgical site wound infection and pain in patients with medial knee osteoarthritis

This study aims to comprehensively compare the effects of unicondylar knee arthroplasty (UKA) and high tibial osteotomy (HTO) on wound infection and pain in patients with medial knee osteoarthritis. A computerized search was conducted in Embase, PubMed, Google Scholar, China National Knowledge Infrastructure, Cochrane Library and Wanfang databases, from database inception to October 2023, for studies comparing UKA and HTO for medial knee osteoarthritis. Studies selection, data extraction and study quality evaluation were independently conducted by two researchers. Stata 17.0 software was employed for data analysis. Overall, 10 studies involving 870 patients with medial knee osteoarthritis were included. It was found that the UKA group had significantly lower wound visual analogue scale scores compared to the HTO group (SMD = -0.53, 95%CI: -0.87 to -0.20, p < 0.001). The incidence of wound infection in the UKA group was higher than in the HTO group (OR = 1.92, 95%CI: 0.65-5.69, p = 0.240), and the incidence of complications was lower (OR = 0.89, 95%CI: 0.52-1.54, p = 0.684), though these differences were not statistically significant. This study indicates that UKA is effective in alleviating postoperative wound pain in medial knee osteoarthritis. However, the rates of postoperative wound infection and complications are comparable to those of HTO. Clinicians should consider factors such as patient age and disease severity in making individualized treatment decisions.

Effect of Varus-Producing Distal Femoral Osteotomy and High Tibial Osteotomy on Compartment Pressures and Contact Area at Varying Degrees of Knee Flexion

Background

In patients with valgus alignment and degenerative changes in the lateral compartment, both distal femoral osteotomy (DFO) and high tibial osteotomy (HTO) can be used to unload the lateral compartment. Prior studies have shown that in valgus knees, the tibial wear is posterior and DFO exerts the greatest effect in extension; however, its effect is decreased as flexion angle rises.

Hypothesis

Medial closing-wedge (MCW) HTO would significantly decrease contact area, mean contact pressure (MCP), and peak contact pressure (PCP) in the lateral knee compartment through knee flexion to a greater extent compared with lateral opening-wedge (LOW) DFO.

Study Design

Controlled laboratory study.

Methods

MCWHTO and LOWDFO were performed, correcting a mean of 8° of valgus alignment, in 10 cadaveric knees using plate fixation. Tibiofemoral contact pressure of the medial and lateral compartments was measured in 0°, 30°, 60°, and 90° of knee flexion before and after osteotomy using thin electronic sensors and load applied through an Instron device. PCP, MCP, and contact area were measured for each condition.

Results

The lateral MCP was significantly decreased in the HTO state compared with the native state in 30° (P = .015), 60° (P = .0199), and 90° (P < .0001) of flexion. The lateral MCP was also significantly decreased in the HTO state when compared with the DFO state in 60° (P = .0093) and 90° of flexion (P < .0001). After DFO, the lateral MCP returned to that of the native state in 60° (P > .999) and 90° (P > .999) of flexion. The lateral PCP decreased for all test states in all degrees of flexion; the HTO state was significantly decreased when compared with the native state in 60° (P < .0001) and 90° (P < .0001).

Conclusion

With varus corrections of 8°, MCWHTO was more effective at unloading the lateral compartment than LOWDFO. This effect was significant as the knee flexion angle increased. This study should be considered as one aspect of the surgical decision-making process.

Clinical Relevance

In patients with mild to moderate valgus deformity without hypoplastic lateral femoral condyle and without significant joint line obliquity, MCWHTO may improve offloading of the lateral compartment in flexion.

Using a patient-specific cutting guide enables identical knee osteotomies: An evaluation of accuracy on sawbones

PURPOSE

It was hypothesized that using a Patient-Specific Cutting Guide (PSCG) would allow the creation of sawbones model osteotomies, identical in the 3 planes and the hinge parameters, that can be used for biomechanical studies. The aim of the study was to evaluate the accuracy of the PSCG system and to introduce and assess the new hinge parameter; the hinge area.

METHODS

Six identical sawbones tibia models were identically set up for identical osteotomy cuts by the same surgeon in the same session and with identical instruments. A medical scanner was used to evaluate the 3D configuration of all the specimens. The analyzed parameters included the cutting angles in both the coronal and sagittal planes (degrees) and the hinge and the slicing areas (cm2), and the hinge thickness (mm). The values were statistically evaluated for average, standard deviation, 95% confidence index, and delta to the expected values were calculated.

RESULTS

The mean values for the coronal and sagittal angles were 110.5̊±1̊ and 89.8̊±0.8̊, respectively. The 95% confidence index level ranged between 0.1̊, and 0.8̊ in both the coronal & the sagittal planes. The mean values for the hinge thickness, the hinge area, and the slicing area were 12.7±1.5mm, 4.2±0.9 cm2, and 18.3±1.2 cm2, respectively.

CONCLUSION

In the presented study, it can be demonstrated that mechanically identical osteotomy specimens, with regard to the cutting planes and hinge parameters, can be reliably created using the PSCG. The identical specimens can be used for biomechanical research purposes to further expand our knowledge of the factors affecting osteotomy outcomes.

LEVEL OF EVIDENCE

IV.

[Assessing the Correlation between the Radiological, Macroscopic and Histological Examination of Degenerative Changes of Articular Surfaces in Knee Osteoarthritis with Varus Deformity]

PURPOSE OF THE STUDY

Our study aims to compare the results of preoperative radiography and intraoperative visual assessment of the cartilage with histological assessment of joint surfaces of the medial and lateral compartments resected in patients during the total knee replacement.

MATERIAL AND METHODS

The cohort included 20 patients (9 men and 11 women) with the mean age of 66.6 (±7.0) years who met the inclusion criteria of the study. Degenerative changes of the knee joint seen on a preoperative weight-bearing anteroposterior X-ray were evaluated according to the Kellgren-Lawrence grading system separately for the medial and lateral compartment. Based on the visual appearance, the condition of articular surfaces was assessed using the International Cartilage Repair Society Score (ICRS Grade). The histological assessment of degenerative changes was conducted by a pathologist with the use of the Osteoarthritis Research Society International Osteoarthritis Cartilage Histopathology Assessment System based on six grades of articular cartilage degeneration.

RESULTS

The mean degree of degenerative changes based on the radiological classification was assessed as 3.5 (±0.6) for the medial compartment and 2.1 (±0.4) for the lateral compartment. The visually assessed chondropathy according to the ICRS Grade was 3.7 (±0.6) for the medial femoral condyle and 1.8 (±1.0) for the lateral femoral condyle. The histological score obtained using the Osteoarthritis Research Society International Osteoarthritis Cartilage Histopathology Assessment was 4.9 (±1.1) for the medial femoral condyle and 2.4 (±0.7) for the lateral femoral condyle. In respect of the medial compartment, there was no statistically significant parametric correlation between the intraoperative visual assessment of the cartilage degeneration and the preoperative radiological grade r = 0.45. The histological assessment showed a statistically significant concordance both with the degree of chondropathy r = 0.76 and the radiological grade r = 0.64. In the lateral compartment, the parametric test showed a statistically significant concordance only between the radiological grade and the histological score r = 0.72. The correlation between the visual assessment of chondropathy and the radiological grade r = 0.27 as well as the histological score r = 0.24 was very low.

DISCUSSION

In our cohort assessing the early degenerative changes of the lateral compartment as well as the more advanced degenerative changes of the medial compartment, the correlation between the intraoperative assessment of cartilage degeneration as a diagnostic method to examine the lateral compartment and the preoperative radiological grade was not confirmed. Our results failed to confirm a better reporting value of the visual cartilage degeneration assessment of the lateral compartment as against the preoperative X-ray. The space width without narrowing on an X-ray has no reporting value for this compartment in case of varus deformity.

CONCLUSIONS

The results clearly indicate that the assessment of macroscopic appearance of the cartilage degeneration during arthroscopy does not necessarily guarantee good long-term clinical outcomes after high tibial osteotomy. The respective degrees of cartilage degeneration identified during the intraoperative visual assessment and the radiological grading of osteoarthritic changes did not correlate in either compartment. In the lateral compartment, the initial radiological and histological findings preceded the visually detectable cartilage changes.

KEY WORDS

knee, cartilage, osteoarthritis, radiology, histology, arthroscopy, osteotomy.

Editorial Commentary: Knee Cartilage Restoration Does Not Greatly Improve Clinical Outcomes After High Tibial Osteotomy-In the Short Term

The treatment of osteoarthritis of the knee (OAK) is a complex matter with significant global, economic, and societal implications. Globally, OAK is currently estimated to affect more than 650 million individuals. In the United States alone, the cost of OAK treatments on the medical system was more than $140 billion in 2013. Because of the increased incidence of OAK as our population grows older, this topic is increasingly more pertinent to our research efforts to determine which treatments are most effective. Many of the treatments focus on cartilage restoration procedures looking to rebuild our knees back to their previous state. OAK is often accompanied with varus malalignment as a concomitant pathology necessitating high tibial osteotomy (HTO) to correct the deformity and provide a beneficial environment for the cartilage restoration to flourish. Cartilage restoration procedures include implanted chondrocytes, particulated juvenile cartilage, osteoarticular allografts, and novel modalities such as costal hyaline allograft. The addition of these restoration procedures is thought to enhance the results of HTO and provide longer duration of effects. Unfortunately, most studies have failed to show improved clinical outcomes in the short term, leading us to wonder whether longer term studies will show improved efficacy or are we just missing the bigger picture.

Osteotomies around the knee are not correlated to substantial post-operative ankle pain

PURPOSE

The relationship between osteotomies around the knee and ankle alignment has been well established. However, little is known about the incidence of new-onset ankle pain after knee osteotomies in the setting of both varus and valgus lower limb malalignments. The purpose of this study is to determine the incidence and characteristics of ankle pain after knee osteotomies; and to clarify the relationship between knee alignment correction, coronal changes suffered by the ankle joint and the development of new-onset ankle pain.

METHODS

Fifty-four lower limbs in 51 consecutive patients, who underwent realignment osteotomies around the knee between April 2013 and October 2020, were retrospectively reviewed. Ultimately, 39 patients (42 knees) were enrolled: 34 had varus deformities and eight had valgus deformities. Ankle pain was assessed according to the Numerical Pain Rating Scale by telephonic interview. The magnitude of alignment correction and the consequent change of both knee and ankle joint lines were analyzed. Correlation between the former and the onset of post-operative ankle pain was evaluated. Patient satisfaction and complications were also noted.

RESULTS

The incidence of new-onset ankle pain after knee realignment osteotomy was 14%, at a mean follow-up of 55 ± 26 months (range 12-93 months). The mean time between osteotomy and onset of ankle pain was 21 ± 25 months (range 2-60 months). The degree of coronal correction was significantly correlated with ankle joint obliquity changes. However, a significant correlation with post-operative ankle pain was not found (p > 0.05).

CONCLUSION

Fourteen percent of the patients who underwent osteotomies around the knee developed new-onset persistent low-intensity ankle pain. The knee and ankle joint biomechanics are closely related, however, only a small percentage of patients suffer from low-intensity ankle pain which is successfully managed with occasional analgesics. Most osteotomies around the knee seem to require no particular concern for the ipsilateral ankle function.

Effects of Lateral Opening-Wedge Distal Femoral Osteotomy on Meniscal Allograft Transplantation: A Biomechanical Evaluation

Background

Lateral meniscal deficiency with valgus malalignment increases the rate of lateral compartment osteoarthritis. Lateral meniscal allograft transplantation (LMAT) with a concomitant varus-producing opening-wedge distal femoral osteotomy (DFO) is an option yet to be evaluated biomechanically.

Purpose/Hypothesis

The purpose of this study was to clarify the biomechanical effects of the realignment procedure in the setting of LMAT. We hypothesized that (1) given the dependence of the lateral compartment on the lateral meniscus, a DFO and increasing degrees of varus would be insufficient to restore lateral compartment pressures to normal from a lateral meniscus-deficient state, and that (2) LMAT would restore lateral compartment pressures to the intact state while DFO would decrease lateral compartment pressures for any given state of the meniscus.

Study Design

Controlled laboratory study.

Methods

Ten cadaveric knees underwent opening-wedge varus-producing DFO secured by an external fixator. Anatomic alignment was standardized to 6° of mechanical valgus, and each joint was tested in full extension. Submeniscal placement of thin film pressure sensors allowed for the recording of contact pressure, peak contact pressure, and contact area. The specimens were loaded on a biaxial dynamic testing machine with loading angles between 9° valgus and 6° varus of mechanical alignment. Conditions tested included intact meniscus, meniscal deficiency, and meniscal transplantation.

Results

Isolated varus-producing DFO to 6° in the meniscus-deficient state failed to restore joint pressures and contact areas to the intact state, with significant changes in mean contact pressure (175%), mean peak contact pressure (135%), and contact area (-41%) (all P < .05 vs intact), while LMAT restored all outcome measures (all P > .05 compared with intact). After LMAT, every additional 1° of DFO correction contributed to a decrease in the mean contact pressure, peak pressure, and contact area of 5.6% (-0.0479 N/mm²), 5.9% (-0.154 N/mm²), and 1.4% (-6.99 mm²) for the lateral compartment and 7.3% (+0.034 N/mm²), 12.6% (+0.160 N/mm²), and 4.3% (+20.53 mm²) for the medial compartment, respectively.

Conclusion

Isolated DFO was inadequate to restore load distribution in meniscus-deficient knees, while concomitant LMAT restored near normal forces and improved the lateral compartment biomechanical profile.

Clinical Relevance

Our findings support the concomitant use of LMAT and varus-producing DFO in the setting of lateral meniscal deficiency with valgus malalignment. This study provides tools for the orthopaedic surgeon to individualize the correction for each patient.

Current clinical practice of knee osteotomy in the Netherlands

BACKGROUND

Realignment osteotomies is gaining popularity amongst Dutch orthopaedic surgeons. Exact numbers and used standards in clinical practice concerning osteotomies are unknown due to the absence of a national registry. The aim of this study was to investigate the national statistics of performed osteotomies, utilized clinical workups, surgical techniques, and post-operative rehabilitation standards in the Netherlands.

METHOD

Dutch orthopaedic surgeons, all members of the Dutch Knee Society, received a web-based survey between January and March 2021. This electronic survey contained 36 questions, subdivided into: general surgeon-related information, number of performed osteotomies, inclusion of patients, clinical workup, surgical techniques, and post-operative management.

RESULTS

86 orthopaedic surgeons filled in the questionnaire, of whom 60 perform realignment osteotomies around the knee. All the 60 responders (100%) perform high tibial osteotomies and 63.3% additionally perform distal femoral osteotomies, while 30% perform double level osteotomies. Discrepancies in surgical standards were reported regarding to inclusion criteria, clinical workup, surgical techniques, and post-operative strategies.

CONCLUSIONS

In conclusion, this study got more insight in knee osteotomy clinical practices as applied by Dutch orthopaedic surgeons. However, there are still important discrepancies which pleads for more standardization based on available evidence. A (inter)national knee osteotomy registry, and even more so, a (inter)national registry for joint preserving surgeries could be helpful to achieve more standardization and treatment insights. Such a registry could improve all aspects of osteotomies and its combinations with other joint-preserving interventions towards evidence for personalised treatments.

Double-level knee osteotomy accurately corrects lower limb deformity and provides satisfactory functional outcomes in bifocal (femur and tibia) valgus malaligned knees

PURPOSE

Double-level knee osteotomy (DLO) is a challenging procedure that requires precision in preoperative planning and intraoperative execution to achieve the desired correction. It is indicated in cases of severe varus or valgus deformities where a single-level osteotomy would yield significantly tilted joint line obliquity (JLO). This study aimed to evaluate the effectiveness of DLO in achieving accurate correction without compromising JLO, using patient-specific cutting guides (PSCGs), in cases of bifocal valgus maligned knees.

METHODS

A single-centre, retrospective analysis of prospectively collected data for a total of 26 patients, who underwent DLO by PSCGs for valgus malaligned knees, between 2015 and 2020. Post-operative alignment was evaluated and the delta for different lower limb0.05, not statistically significant (ns)). All KOOS subs alignment parameters was calculated; the hip-knee-ankle angle (ΔHKA), medial proximal tibial angle (ΔMPTA), and lateral distal femoral angle (ΔLDFA). At the two-year follow-up, changes in the KOOS sub-scores, UCLA scores, lower limb discrepancy (LLD), and mean time to return to work and sport were recorded. All intraoperative and postoperative complications were recorded. The Mann-Whitney U test with a 95% confidence interval (95% CI) was used to evaluate the differences between two variables; one-way ANOVA between more than two variables and the paired Student's t-test was used to estimate the evolution of functional outcomes.

RESULTS

The postoperative mean ΔHKA was 0.9 ± 0.9°, the mean ΔMPTA was 0.7 ± 0.7°, and the mean ΔLDFA was 0.7 ± 0.8° (all values with p > 0.05, not statistically significant (ns)). All KOOS subscore's mean values were improved to an extent two-fold superior to the reported minimal clinically important difference (MCID) (all with p < 0.0001). There was a significant increase in the UCLA score at the final follow-up (5.4 ± 1.5 preoperatively versus 7.7 ± 1.4, p < 0.01). The mean time to return to sport and work was 4.7 ± 1.1 and 4.3 ± 2.1 months, respectively. There was an improvement in Lower-limb discrepancy preoperative (LLD = 1.3 ± 2 cm) to postoperative measures (LLD = 0.3 ± 0.4 cm), ns. Complications were 2 femoral hinge fractures, 2 deep vein thromboses, 1 delayed tibial healing, and 1 hardware removal for hamstring irritation syndrome.

CONCLUSION

DLO is effective and safe in achieving accurate correction in bifocal valgus malaligned knees with maintained lower limb length and low complication rate with no compromise of JLO.

LEVEL OF EVIDENCE

III.

Effectiveness of bone substitute materials in opening wedge high tibial osteotomy: a systematic review and meta-analysis

BACKGROUND

A meta-analysis of eligible studies was performed to evaluate the effectiveness of bone substitute materials (BSMs) in opening wedge high tibial osteotomy (OWHTO) for knee osteoarthritis.

METHODS

A systematic review and meta-analysis were conducted according to the Preferred Reporting Items for Systematic Reviews and Meta-Analysis (PRISMA). A comprehensive literature search was performed, and studies comparing BSM with bone graft (BG) and without bone graft (WG) were included. The Cochrane risk of bias tool (version 1.0) and Risk of Bias in Non-randomized Studies of Interventions (ROBINS-I) tool were used to assess the risk of bias for randomized controlled trials (RCTs) and non-randomized studies (NRSs), respectively. The outcomes measured were the osteotomy gap size, the occurrence rates of non-union and lateral hinge fractures, knee functional score, infection and the Visual Analogue Scale (VAS). The quality of evidences was evaluated by Grades of Recommendation, Assessment, Development and Evaluation (GRADE) Working Group system.

RESULTS

Five RCTs and eight NRS including 769 participants were included in our meta-analysis. The BSM group had a larger osteotomy gap size than the control group (MD: 0.41 mm, 95% confidence interval (CI): [0.06, 0.76], p=.02, I2=0%), with a significant difference. No significant difference was found between BSM and control group in main analysis in terms of bone non-union, but with a higher non-union rate when BSM combined with long locking plate was used. No significant differences were found in other outcome measures except for VAS from NRS subgroup. The quality of evidence for outcomes was low.

CONCLUSIONS

BSM combined with locking plate techniques offers a safe and efficient alternative option in OWHTO for osteotomy gap larger than 10 mm, but be aware of the possibility of bone non-union. Given the inherent heterogeneity and low quality of the included studies, future well-designed RCTs are essential to verify the findings.KEY MESSAGEThe treatment of the osteotomy gap is still controversial.BSM combined with a locking plate offers a safe and efficient alternative option for OWHTO with an over 10 mm of osteotomy gap over 10 mm.Due to the inherent heterogeneity and low quality of the included studies, the results should be cautiously interpreted in clinical practice.

Variability of functional knee phenotype for coronal alignment in advanced varus knee osteoarthritis in the Japanese population

PURPOSE

New concept of functional knee phenotypes in Caucasians demonstrated the variability of coronal alignment in knee osteoarthritis (OA), but it remains unclear in Japanese. This study aims to analyze the knee phenotype in advanced varus knee OA for Japanese. In addition, the ethnical difference is discussed.

METHODS

This study analyzed 879 knees involving 186 males (74 years) and 693 females (74 years). The knee phenotypes were assessed by the definition in Hirschmann's group. The hip-knee-ankle angle (HKA), femoral mechanical angle (FMA) and tibial mechanical angle (TMA) were assessed in CT data according to the coordinate system. The neutral angle was 180° in HKA, 93° in FMA and 87° in TMA. The smaller angle means larger varus angles.

RESULTS

The average angle (males, females) of the HKA (170.9 ± 4.3°, 169.4 ± 5.0°), FMA (91.5 ± 2.7°, 90.6 ± 3.0°), and TMA (82.4 ± 3.6°, 82.7 ± 3.7°) demonstrated varus angles with the sex difference (HKA, p < 0.001; FMA, p = 0.001). The phenotypes were 73 types in males and 150 types in females with a mild correlation between the HKA and the FMA or TMA. In 61.3% of males and 52.2% of females, the TMA was greater than the FMA, while the FMA was greater in 16.7% of males and 23.1% of females.

CONCLUSION

There were many functional knee phenotypes with sex differences for advanced varus knee OA in Japanese, showing ethnical differences of larger varus angles compared to those for Caucasians in the previous report.

LEVEL OF EVIDENCE

IV.

Computer-aided Design of Distal Femoral Osteotomy for the Valgus Knee and Effect of Correction Angle on Joint Loading by Finite Element Analysis

Objective

Lateral open‐wedge distal femoral osteotomy (DFO) has been used to treat valgus deformity of the knee, with good clinical outcomes. However, there is a lack of biomechanical studies regarding the angle of correction. The objective of this study was to apply computer‐aided design (CAD) for osteotomy planning in a three‐dimensional (3D) anatomical model and to assess the biomechanical differences among the varying correction angles on joint loading by finite element analysis (FEA).

Methods

To model different angles of lateral open‐wedge DFO correction, the CAD software package Mimics 21.0 was used to accurately simulate the operated knee. The femur was cut to 0°, 2°, 4°, 6°, 8°, and 10° of varus (equivalent to hip‐knee‐ankle angles of 180°, 178°, 176°, 174°, 172°, and 170°, respectively). The original knee model and the corrected models were processed by FE software. Then, the FE models were subjected to an axial force to obtain the von Mises stress (VMS) and shear stress distributions within the femoral cartilages and menisci.

Results

Under a compressive load of 740 N, the highest VMS in lateral and medial compartments of the intact knee model was 3.418 and 3.303 MPa. The maximum value of both the VMS and the shear stress in the lateral compartment decreased as the varus angle increased, but the corresponding values in the medial compartment increased. When the hip‐knee‐ankle (HKA) angle was 180°, the VMS in the lateral and medial compartments was balanced (3.418 and 3.303 MPa, respectively). Meanwhile, when the HKA angle was 178° (3.488 and 3.625 MPa, respectively), the shear stress in the lateral and medial compartments was balanced. In addition, the magnitude of change in the stress was significantly higher in the medial compartment (90.9%) than in the lateral compartment (19.3%).

Conclusion

The optimal correction angle of the valgus knee is close to neutral alignment or slightly varus (0° ‐ 2°). Overcorrection is not recommended, as it can result in a steep increase of the stress within the medial compartment and may accelerate the process of medial compartment OA.

Three-Dimensional Patient Specific Instrumentation and Cutting Guide for Medial Closing Wedge High Tibial Osteotomy to Correct Valgus Malalignment

Achievement of appropriate mechanical knee alignment is crucial to ensure optimal clinical outcomes following osteotomy procedures about the knee. The use of patient-specific instrumentation (PSI) to assist in preoperative planning and intraoperative realignment has gained increasing popularity. The purpose of this article is to describe a surgical technique involving a medial closing wedge high tibial osteotomy performed using three-dimensional (3D) PSI and cutting guide to revise residual valgus deformity following failed distal femoral osteotomy. The correction angle, 3D position of the hinge and wedge, as well as final plate and screw position are planned preoperatively using virtual software and computed tomography imaging to allow precise surgical execution.

Comparison and Validation of Preoperative Planning Techniques for Distal Femoral Osteotomies and Proximal Tibial Osteotomies

Preoperative planning is important for accurate intraoperative execution in many surgical fields. Planning for distal femoral osteotomies (DFOs) and proximal tibial osteotomies (PTOs) consists of choosing the level of the osteotomy, measuring the angle of the osteotomy based on hip-knee-ankle alignment, and choosing a proper osteotomy wedge size. Medical imaging IT solutions company Sectra has implemented a new osteotomy tool in their radiographic system that is simpler than the accepted standard of modified center of rotation of angulation (mCORA) technique, yet unvalidated. In this study, we aim to compare the Sectra osteotomy tool versus the mCORA technique to measure the osteotomy angles as well as wedge sizes in both DFOs and PTOs to validate this new tool.We enrolled n = 30 consecutive patients with DFOs and n = 30 PTOs from the last year. The Pearson correlation coefficient (PCC) along with descriptive statistics was used to evaluate for similarity between the two techniques. We also compared interobserver and intraobserver reliability using intraclass correlation coefficients (ICC).The PCC for osteotomy angles in DFOs and PTOs were both 0.998 (p < 0.001 for both). For wedge sizes, the PCC in DFOs was 0.993 and 0.980 in PTOs (p < 0.001 for both). ICCs were high for both interobserver measurements in osteotomy angles and wedge sizes (range: 0.989-0.999) as well as intraobserver measurements (0.994-0.999).The Sectra osteotomy tool is a validated tool for preoperative measurements of DFOs and PTOs. It is reliable and simpler than the current practice of the mCORA technique. We suggest future studies to analyze this Sectra osteotomy tool in other settings as to incorporate it into widespread clinical use.

A 2021 consensus statement on osteotomies around the knee by the UK Knee Osteotomy consensus Group (KOG)

BACKGROUND

There are significant deficiencies in the evidence base of modern-day osteotomy which result in significant variation in practice between surgeons. The purpose of this statement was to develop a consensus statement on the practice of osteotomy so that a more standardized approach to the indications, surgical technique, and postoperative care could be outlined. The article is also intended to educate and inform the practice of individuals who are early in their experience and/or clinical practice.

METHOD

A group of 29 specialist knee surgeons who regularly perform osteotomy was convened to form the Knee Osteotomy consensus Group (KOG). Consensus was determined utilizing the consensus group technique described by List. A total of 37 questions were asked covering all aspects of clinical practice.

RESULTS

20 statements were generated and debated until a criterion level of 70% was met.

CONCLUSIONS

Consensus was achieved regarding 20 statements concerning Indications for surgery, decision making, surgical planning, technique, post-operative assessment and recovery.

Return to Sport following Isolated Lateral Opening Wedge Distal Femoral Osteotomy

Purpose. The aims of this study were to (1) examine the timeline of return to sport (RTS) following isolated lateral opening wedge distal femoral osteotomy (DFO), (2) evaluate the degree of participation on RTS, and (3) identify risk factors for failure to RTS. Methods. Nineteen consecutive patients undergoing isolated lateral opening wedge DFO were reviewed retrospectively at a minimum of 2 years postoperatively. Patients completed a sports questionnaire, visual analogue scale for pain (VAS-Pain), Single Assessment Numerical Evaluation (SANE), and a satisfaction questionnaire. Results. Seventeen patents (89.5%; age 32.1 ± 10.1 years; gender 9 males, 52.9%) were contacted at 7.3 ± 4.4 years (range 2.0-13.8 years). Twelve patients (70.6%) resumed playing ≥1 sport at an average time of 9.5 ± 3.3 months (range 3-12 months). Of these 12 patients, 6 returned to a lower level of participation (50.0%). Seven patients (41.2%) had returned to the operating room for further surgery, which included removal of hardware (5.9%) and total knee arthroplasty (5.9%). The average VAS-Pain, SANE, and Marx scores were 3.4 ± 2.6 (range 0-8), 56.2 ± 18.7 (range 20-85), and 5.0 ± 5.3 (range 0-16), respectively. Fourteen patients (82.4%) were at least somewhat satisfied with their procedure. Conclusion. In patients with isolated lateral compartment osteoarthritis and valgus deformity, lateral opening wedge DFO allows 70.6% of patients to RTS by 9.5 ± 3.3 months. However, most patients may be unable to return to their presymptomatic level of function. Patient expectations regarding RTS can be appropriately managed with adequate preoperative patient education. Level of Evidence. IV, case series.

Osteotomy Around the Knee: The Surgical Treatment of Osteoarthritis

Osteoarthritis causes joint pain and functional disorder, of which knee osteoarthritis is the most common. Nowadays, clinically effective treatments mainly include conservative treatment, arthroplasty, and osteotomy. However, conservative treatment only offers symptomatic relief and arthroplasty is limited to the patients with a moderate to severe degree of osteoarthritis. For relatively young patients who require greater knee preservation, a surgical treatment with low operation trauma and revision rate is needed. Osteotomy around the knee, based on the notion of “knee preservation,” has been chosen as an alternative surgical treatment. Cutting and realigning the bones corrects the mechanical line of lower limb force bearing. As such, osteotomy around the knee retains normal anatomical structure and obtains good functional recovery of the knee joint. The techniques of osteotomy around the knee includes anti‐varus deformity and anti‐valgus deformity osteotomy, aiming to reallocate the force bearing in the compartment of the knee joint. By choosing the surgical section of the lower limbs, the osteotomy around the knee can achieve the correction of mechanical axis, such as the high tibial osteotomy (HTO), proximal fibular osteotomy (PFO), and distal femur osteotomy (DFO). Numerous modified techniques have been developed to meet the demands of patients based on traditional methods. These modified osteotomy have their own advantages and indications. This paper aims to guide clinical treatment by reviewing different types of osteotomies, and their effects, that have been studied and applied widely in clinical practices.

Technique for Medial Closing-Wedge Proximal Tibia Osteotomy in the Valgus Knee

Valgus malalignment can be corrected with a medial closing-wedge proximal tibia osteotomy in patients with symptomatic lateral compartment disease. Advantages of this technique include the inherent stability of the closing wedge with direct bone contact and reliable healing that enables early weight bearing and shorter recovery time. In addition, a tibial-based osteotomy alters joint contact forces in both flexion and extension versus femoral-based osteotomies. The purpose of this article is to present a reproducible technique for medial closing-wedge proximal tibia osteotomy and review the indications, preoperative planning, rationale, and clinical outcomes.