Effects of polymerization initiator complexation in methacrylated β-cyclodextrin formulations

Cyclodextrins as Multi-Functional Ingredients in Dentistry

Cyclodextrins are present in a variety of oral hygiene compositions. The present work describes the role of cyclodextrins in several toothpastes and mouthwashes that are already available in the market, as well as their prospective use in other applications as investigated in studies in the literature. Moreover, cyclodextrins are under study for the development of materials used in various techniques of dental repair, such as fillings, cements and binders therein. Their role in each of the innovative materials is presented. Finally, the prospect of the use of cyclodextrin-based delivery systems for the oral cavity is introduced, with a focus on new cyclodextrin molecules with dual action as bone-targeting agents and osteogenic drugs, and on new cross-linked cyclodextrin particles with a high drug loading and sustained drug delivery profile for the treatment of diseases that require prolonged action, such as periodontitis. In conclusion, cyclodextrins are herein demonstrated to act as versatile and multi-action ingredients with a broad range of applications in dentistry.

Mass Spectrometry of Esterified Cyclodextrins

Cyclodextrins are cyclic oligosaccharides that have received special attention due to their cavity-based structural architecture that imbues them with outstanding properties, primarily related to their capacity to host various guest molecules, from low-molecular-mass compounds to polymers. Cyclodextrin derivatization has been always accompanied by the development of characterization methods, able to unfold complicated structures with increasing precision. One of the important leaps forward is represented by mass spectrometry techniques with soft ionization, mainly matrix-assisted laser desorption/ionization (MALDI) and electrospray ionization (ESI). In this context, esterified cyclodextrins (ECDs) benefited also from the formidable input of structural knowledge, thus allowing the understanding of the structural impact of reaction parameters on the obtained products, especially for the ring-opening oligomerization of cyclic esters. The current review envisages the common mass spectrometry approaches such as direct MALDI MS or ESI MS analysis, hyphenated liquid chromatography-mass spectrometry, and tandem mass spectrometry, employed for unraveling the structural features and particular processes associated with ECDs. Thus, the accurate description of complex architectures, advances in the gas phase fragmentation processes, assessment of secondary reactions, and reaction kinetics are discussed in addition to typical molecular mass measurements.

Analysis of carbohydrates and glycoconjugates by matrix-assisted laser desorption/ionization mass spectrometry: An update for 2003-2004

This review is the third update of the original review, published in 1999, on the application of matrix-assisted laser desorption/ionization (MALDI) mass spectrometry to the analysis of carbohydrates and glycoconjugates and brings the topic to the end of 2004. Both fundamental studies and applications are covered. The main topics include methodological developments, matrices, fragmentation of carbohydrates and applications to large polymeric carbohydrates from plants, glycans from glycoproteins and those from various glycolipids. Other topics include the use of MALDI MS to study enzymes related to carbohydrate biosynthesis and degradation, its use in industrial processes, particularly biopharmaceuticals and its use to monitor products of chemical synthesis where glycodendrimers and carbohydrate-protein complexes are highlighted.

Characterization of hydrogels prepared from copolymerization of the different degrees of methacrylate-grafted chondroitin sulfate macromers and acrylic acid

Different degrees (between 20 and 75%) of methacrylate-grafted chondroitin sulfate (CS-MA) were synthesized. These CS-MA macromers were further copolymerized with acrylic acid (AA) at the molar ratio of 1 to 5 to form hydrogels. The sol percents of these CS-MA-AA hydrogels decreased and the cross-linking densities were studied with respect to the degrees of MA substitution onto CS-MA. The cytotoxicity with the increase in degree of MA substitution (DS) onto CS-MA as well as their hydrogels prepared from the corresponding macromers was tested using 293T cells. The cell viability of human dermal fibroblast and mescenchymal stem cells was further tested upon exposure to 75% CS-MA for 1-, 3-, and 7-day incubation period. The hydrogels maintained degradability for long periods of time as evidenced by SEM. A model protein, BSA, demonstrated the prolong-release behaviors of these hydrogels in simulated gastric fluids and pH 7.4 phosphate buffer solutions and a faster release rate in the presence of chondroitinase and esterase at pH 7.4.

Controlled immobilization of chondroitin sulfate in polyacrylic acid networks

Novel semi-interpenetrating polymer networks (semi-IPNs) of chondroitin sulfate (ChS) and acrylic acid (AA) were prepared with the aim of obtaining a hydrogel for use as a colon-specific drug carrier. By controlling the concentrations of cross-linking agent, diethylene glycol dimethacrylate (DEGDA), as well as the reaction solvent, high swelling percentages were obtained (approx. 1600%). However, the highest sol percent obtained for these hydrogels was approx. 70%, and most of the chondroitin sulfate remained soluble and could be extracted. Therefore, an alternative approach was adopted: methacrylate-grafted ChS (ChSMA) was synthesized and then co-polymerized with acrylic acid (AA) at a molar ratio of 1:5 with various concentrations of AA. The sol content of these ChSMA-AA hydrogels was reduced to approx. 20%, and the cross-linking densities were almost 100-fold higher than those of the semi-IPNs. FT-IR spectra showed that the H-bonding interactions between ChS and PAA and the spectra of the semi-IPNs were similar to that of PAA itself after sol extraction. In contrast, the FT-IR spectra of ChSMA-AA remained intact after sol extraction. Ketoprofen was used as a model drug to test the sustained release behavior of these hydrogels.

Shear bond strength of experimental methacrylated beta-cyclodextrin-based formulations

Previous studies have shown that methacrylated beta-cyclodextrins (MCDs) can be used as comonomers in resin-based dental composites. These MCDs by virtue of having several polymerizable methacrylate groups and hydrophilic hydroxyl groups, may also promote bonding of dental composites to dentin. This study evaluated MCDs as adhesive comonomers, and optimized comonomer and polymerization initiator concentrations for maximum shear bond strength (SBS). Experimental MCD-based bonding formulations in acetone were prepared by mixing 33 mass fraction % MCDs with (10, 20, 30, 40, or 50) mass fraction % of 2-hydroxyethyl methacrylate (HEMA). The MCD/HEMA-based solutions were activated with varied amounts of camphorquinone (CQ) and ethyl 4-dimethylamino benzoate (4E). Samples for SBS were prepared by bonding a composite resin to acid-etched dentin surfaces of extracted human molars with the experimental bonding solutions. The specimens were immersed in 37 degrees C water for 24 h and bond strengths were determined in shear mode. With increasing HEMA concentration, the SBS values of MCD-bonding solutions increased to 16 MPa at a composition of 33% MCD, 30% HEMA, and 37% acetone by mass. Also, SBS values of MCD-bonding solutions varied as a function of the CQ and 4E concentrations and passed through a maximum SBS at 21 MPa, which was comparable to that of a commercial control. This preliminary study indicated that nonacidic MCD monomers could be used as an adhesion-promoting comonomer. Additional modification of MCDs having both polymerizable groups and anionic ligand groups, e.g., polymerizable acidic cyclodextrin derivatives should increase the SBS even further.

Properties of eight methacrylated beta-cyclodextrin composite formulations

OBJECTIVES

Methacrylated beta-cyclodextrins (MCDs) are novel candidate dental monomers if all or some of the hydroxyl groups of beta-cyclodextrin are substituted with methacrylate groups. The main objective of this study was to evaluate mechanical properties of a number of composite formulations having MCDs as novel dental comonomers. The properties determined were flexural strength (FS), volumetric shrinkage (VS), and degree of conversion (DC).

METHODS

A mass fraction of 50% of MCD monomers was mixed with a mass fraction of 50% each of a series of dimethacrylate or monomethacrylate diluent comonomers to produce consistent formulations of a workable viscosity. For comparison a resin mixture of a mass fraction of 50% Bis-GMA and a mass fraction of 50% triethyleneglycol dimethacrylate (a typical dental resin mixture) was also studied. The mixtures were activated with camphorquinone and ethyl 4-dimethylamino benzoate. One part by mass of each activated resin formulation was mixed with three parts by mass of glass filler. Samples for the FS tests were prepared in (2 x 2 x 25) mm3 molds by light-curing the composites for 2 min on each side. The cured samples were immersed in 37 degrees C water for 24 h, and FS was measured with an Instron machine at a crosshead speed of 0.5 mm/min. VS was measured by a computer-controlled mercury dilatometer. DC was measured by near-infrared spectroscopy.

RESULTS

The properties of the MCD-based composites depended on the kind of diluent used. With these MCD monomers, diluents of triethyleneglycol dimethacrylate, 1,10-decamethylenediol dimethacrylate, or benzyl methacrylate yielded the best composite properties.

SIGNIFICANCE

Although not yet fully optimized, MCD-based composite formulations containing triethyleneglycol dimethacrylate, 1,10-decamethylenediol dimethacrylate, or benzyl methacrylate yielded flexural strength and volumetric shrinkage values were comparable to those of the Bis-GMA/triethyleneglycol dimethacrylate controls. These findings lend support for further development and evaluations of polymerizable cyclodextrin derivatives for use in dental materials.