Ammonium hexafluorosilicate elicits calcium phosphate precipitation and shows continuous dentin tubule occlusion

Effect of a modified adhesive system with encapsulated arginine and calcium carbonate on dentin permeability

To modify an adhesive system with halloysite clay nanotubes (HNTs) containing arginine and calcium carbonate and to evaluate their cytocompatibility, viscosity and efficacy in reducing dentin permeability. HNTs containing arginine and calcium carbonate were incorporated into the primer and adhesive of a three-step adhesive system (SBMP), and their viscosity was measured. Discs (n = 4/group) were prepared: SBMP (control), HNT-PR (modified primer), HNT-ADH (modified adhesive) and HNT-PR + ADH (modified primer and adhesive) were evaluated regarding cell death and viability. Dentin discs were prepared and randomly assigned into the following treatments (n = 10): NC (no treatment), SBMP, HNT-PR, HNT-ADH, HNT-PR + ADH and COL (Colgate® Sensitive Pro-relief™ prophylaxis paste). After, they were submitted to an erosive-abrasive cycling. Dentin permeability (hydraulic conductance) was evaluated at baseline, 24 h after treatment and after cycling. Both the modified primer and adhesive showed significantly higher viscosity than their controls. Group HNT-PR resulted in significantly higher cytotoxicity when compared to SBMP and HNT-PR + ADH groups. Group HNT-ADH resulted in the highest cell viability compared to all other groups. All groups showed significantly lower dentin permeability when compared to the NC group. Post-cycling, SBMP and HNT-ADH groups showed significantly lower permeability when compared to COL group. The addition of encapsulated arginine and calcium carbonate did not affect the cytocompatibility of the materials nor their ability to reduce dentin permeability.

Biomimetic Dentin Repair: Amelogenin-Derived Peptide Guides Occlusion and Peritubular Mineralization of Human Teeth

Exposure of dentin tubules due to loss of protective enamel (crown) and cementum (root) tissues as a result of erosion, mechanical wear, gingival recession, etc. has been the leading causes of dentin hypersensitivity. Despite being a widespread ailment, no permanent solution exists to address this oral condition. Current treatments are designed to alleviate the pain by either using desensitizers or blocking dentin tubules by deposition of minerals or solid precipitates, which often have short-lived effects. Reproducing an integrated mineral layer that occludes exposed dentin with concomitant peritubular mineralization is essential to reestablish the structural and mechanical integrity of the tooth with long-term durability. Here, we describe a biomimetic treatment that promotes dentin repair using a mineralization-directing peptide, sADP5, derived from amelogenin. The occlusion was achieved through a layer-by-layer peptide-guided remineralization process that forms an infiltrating mineral layer on dentin. The structure, composition, and nanomechanical properties of the remineralized dentin were analyzed by cross-sectional scanning electron microscopy imaging, energy dispersive X-ray spectroscopy, and nanomechanical testing. The elemental analysis provided calcium and phosphate compositions that are similar to those in hydroxyapatite. The measured average hardness and reduced elastic modulus values for the mineral layer were significantly higher than those of the demineralized and sound human dentin. The structural integration of the new mineral and underlying dentin was confirmed by thermal aging demonstrating no physical separation. These results suggest that a structurally robust and mechanically durable interface is formed between the interpenetrating mineral layer and underlying dentin that can withstand long-term mechanical and thermal stresses naturally experienced in the oral environment. The peptide-guided remineralization procedure described herein could provide a foundation for the development of highly effective oral care products leading to novel biomimetic treatments for a wide range of demineralization-related ailments and, in particular, offers a potent long-term solution for dentin hypersensitivity.

Bis(2-, 3-, 4-carboxyethylpyridinium) hexafluorosilicates as potential caries prophylactic agents

Interaction of 2-, 3-, 4-carboxyethylpyridines (L1, L2, L3) with fluorosilicic acid results in the corresponding bis(pyridinium) hexafluorosilicates I-III, characterized by elemental analysis, IR, ¹ H, ¹⁹ F nuclear magnetic resonance (NMR), and mass spectrometry, solubility data, and X-ray crystallography. Crystallographic data: Fdd2, Z = 8, a = 28.610(2) Å, b = 18.8378(14) Å, c = 7.3236(5) Å (I); P-1, Z = 1, a = 6.2712(4) Å, b = 7.1706(5) Å, c = 10.9721(7) Å, α = 102.514(6)°, β = 97.037(5)°, γ = 93.640(6)° (II); P2₁ /c, Z = 2, a = 10.0345(6) Å, b = 9.8734(5) Å, c = 9.4704(6) Å, β = 94.347(6)° (III). The dominant intermolecular contacts from the Hirshfeld surface analysis are H^… F/F^… H, H^… H, and H^… O/O^… H with percentages of 33.3%-34.5%, 26.4%-30.0%, and 16.0%-21.8%. The infrared spectra for I-III exhibit stretching vibrations ν(N⁺ H) at 3300-3050 cm^-1 ; stretching and deformation vibrations ν(SiF) and δ(SiF₂ ) for [SiF₆ ]^2- anions are registered near 740 cm^-1 and in the range of 480-440 cm^-1 . In the ¹⁹ F NMR spectra of aqueous solutions of I-III, strong singlet signals of the [SiF₆ ]^2- anion were registered at δ(F) = -133.35 ppm (I), -131.43 ppm (II), -129.02 ppm (III) with two satellites due to the spin-spin interaction ²⁹ Si-¹⁹ F (J(²⁹ Si-¹⁹ F) = 107.5 Hz (II), 107.6 Hz (III)). I-III reveal high solubility in water and dimethyl sulfoxide and very poor solubility in methanol and ethanol. All compounds demonstrate noticeable anticaries activity and absence of hepatotoxic effects, and bis(3-carboxyethylpyridinium) hexafluorosilicate II displays the highest caries-preventive efficacy, which significantly exceeds values for the reference preparations, NaF and (NH₄ )₂ [SiF₆ ].

Measuring the Remineralization Potential of Different Agents with Quantitative Light-Induced Fluorescence Digital Biluminator

Background

The aim of this study was to investigate the effectiveness of different remineralization agents by quantitative light-induced fluorescence digital Biluminator™ (QLF-D).

Methods

Artificial caries lesions were created, and the teeth were divided according to the tested materials: (i) distilled water, (ii) acidulated phosphate fluoride (APF), (iii) Curodont Repair (CR), (iv) ammonium hexafluorosilicate (SiF) and (v) ammonium hexafluorosilicate plus cetylpyridinium chloride (SiF + CPC). After treatment procedures, each of the samples was placed in artificial saliva. After demineralization and 1 and 4 weeks of remineralization procedures, fluorescence loss and lesion areas were measured with QLF-D. Data were statistically analyzed (α = 0.05).

Results

The fluorescence values of the demineralized enamel specimens treated with the various agents differed significantly compared with pretreatment values for both 1 and 4 weeks (p<0.05). At 4 weeks, the highest fluorescence gain was calculated in the CR, APF and SiF groups compared with the control (p<0.05).

Conclusions

APF, SiF and CR groups yielded greater remineralization ability than SiF + CPC and control groups.

Effect of Water-Cooled Nd:YAG Laser on Dentinal Tubule Occlusion In Vitro

OBJECTIVE

The objective of this study was to investigate the effect of a new water-cooled Nd:YAG laser on dentinal tubule occlusion.

BACKGROUND DATA

The effect of water-cooled Nd:YAG laser on dentinal tubule occlusion has not been reported.

METHODS

Acid-etched dentin samples were randomly divided into three groups: (1) dentin control, (2) dentin treated by Nd:YAG laser, (3) dentin treated by water-cooled Nd:YAG laser. After laser irradiation, half of the samples were immersed in a 6 wt% citric acid (pH 1.5) solution for 1 min to evaluate the acid resistance. The morphologies of dentin surfaces were characterized by scanning electron microscopy. The number and diameters of the open dentinal tubules were analyzed by one-way and two-way analyses of variance.

RESULTS

Both the Nd:YAG laser and water-cooled Nd:YAG laser melted the superficial layer of dentin, which caused dentinal tubule occlusion in most areas and diameter reduction of the rest open tubules. Microcracks on the dentin surface were only observed in the Nd:YAG laser group. The tubule occlusion induced by the two lasers showed a good acid resistance.

CONCLUSIONS

The effect of water-cooled Nd:YAG laser on dentinal tubule occlusion is similar to that of the Nd:YAG laser. The dentinal tubule occlusion induced by the two lasers could resist acid challenge to some extent.

Clinical Efficacy of Fluoride Varnish and Low-Level Laser Radiation in Treating Dentin Hypersensitivity

Abstract The objective of this study was to compare the efficacy of fluoride varnish (Fluorniz(r)) and irradiation with a gallium-arsenide-aluminum diode laser in the treatment of cervical dentin hypersensitivity. Cervical dentin hypersensitivity (CDH) is a painful condition that is highly prevalent in the world's adult population, with one in six patients presenting this symptom. Eighty-six teeth were divided into two groups: Group 1, teeth treated with Fluorniz; Group 2, teeth irradiated with a GaAlAs laser at a 4 J/cm2 dose. The two treatments were applied to the buccal cervical region in four sessions, at intervals of 72 to 96 h. The response of the patient to tactile and thermal-evaporative stimuli was rated on a visual analog scale. The results showed a reduction of hypersensitivity in response to tactile and thermal-evaporative stimulation at the end of treatment in both groups. In conclusion, short-term treatment with Fluorniz was found to be more effective than low-level laser radiation in reducing cervical dentin hypersensitivity.

Use of poly (amidoamine) dendrimer for dentinal tubule occlusion: a preliminary study

The occlusion of dentinal tubules is an effective method to alleviate the symptoms caused by dentin hypersensitivity, a significant health problem in dentistry and daily life. The in situ mineralization within dentinal tubules is a promising treatment for dentin hypersensitivity as it induces the formation of mineral on the sensitive regions and occludes the dentinal tubules. This study was carried out to evaluate the in vitro effect of a whole generation poly(amidoamine) (PAMAM) dendrimer (G3.0) on dentinal tubule occlusion by inducing mineralization within dentinal tubules. Dentin discs were treated with PAMAM dendrimers using two methods, followed by the in vitro characterization using Attenuated total reflection Fourier-transform infrared spectroscopy (ATR-FTIR), X-ray diffraction (XRD), Field emission scanning electron microscopy (FE-SEM) and Energy-Dispersive X-ray Spectroscopy (EDS). These results showed that G3.0 PAMAM dendrimers coated on dentin surface and infiltrated in dentinal tubules could induce hydroxyapatite formation and resulted in effective dentinal tubule occlusion. Moreover, crosslinked PAMAM dendrimers could induce the remineralization of demineralized dentin and thus had the potential in dentinal tubule occlusion. In this in vitro study, dentinal tubules occlusion could be achieved by using PAMAM dendrimers. This could lead to the development of a new therapeutic technique for the treatment of dentin hypersensitivity.

Nano/micro fluorhydroxyapatite crystal pastes in the treatment of dentin hypersensitivity: an in vitro study

OBJECTIVES

Dentin hypersensitivity (DH) is a prevalent problem. This study aimed to formulate a paste using fluorhydroxyapatite (FA) crystals dispersed in different carriers to treat DH. The ability to occlude patent dentinal tubules and to release ions was investigated.

MATERIALS AND METHODS

Twenty percent FA/sodium alginate, 40% FA/poly(hydroxyethyl methacylate(HEMA)), and 40% FA/poly(DMA-co-MEA) were applied to etched dentin samples and examined with scanning electron microscopy (SEM) to determine the degree of tubule occlusion. Fluoride electrode was used to measure F release and spectroscopy to evaluate Ca and PO4 release. The cytotoxicity of the synthesized poly(DMA-co-MEA) gel was tested. Kruskall-Wallis test was used to test the differences in ion release between the groups.

RESULTS

FA/poly(DMA-co-MEA) paste obstructed up to 80% of the dentinal tubules, while the coverage was up to 70% for FA/poly(HEMA) and less than 50% for FA/sodium alginate. Fluoride and Ca release was the highest for FA/P(HEMA), 7.2 ± 0.7 and 139.8 ± 32.5 ppm, respectively. The highest concentration of PO4 was 46.2 ± 16.4 ppm for FA/Sodium alginate. No statistical significance was found.

CONCLUSIONS

FA/Poly(DMA-co-MEA) and FA/poly(HEMA) pastes may offer immediate short-term relief of DH because of their ability to occlude the tubules and adhere to wet dentin surfaces. The release of the F, Ca, and PO4 ions may offer long-term relief by forming a mineral barrier both within the dentinal tubules and on the dentin surface.

CLINICAL SIGNIFICANCE

The tested materials may offer a long-term treatment for DH.

The synthesis and characterization of a novel potassium chloride-fluoridated hydroxyapatite varnish for treating dentin hypersensitivity

Dentin hypersensitivity is treated using materials that occlude the dentinal tubules or release potassium ions that induce nerve desensitization. In this study we formulated a novel varnish containing potassium chloride and fluoridated hydroxyapatite and evaluated its physical properties and cytotoxicity. Potassium ion release from the varnish was measured. Dentin permeability was evaluated by measuring the hydraulic conductance of etched dentin discs treated with the varnish. The direct contact test and MTT assay were performed to evaluate the varnish's cytotoxicity. We found that the varnish released potassium ions over 6 h, and demonstrated a statistically higher reduction in dentin permeability compared to commercial fluoride varnish or control. Dentin disc scanning electron microscopy images demonstrated occluded dentinal tubules in the novel varnish group after brushing. The cytotoxicity tests indicated the varnish was biocompatible with gingival and pulpal fibroblasts. We propose the novel varnish is a potential material for use in hypersensitivity management.

Cytotoxicity of ammonium hexafluorosilicate on human gingival fibroblasts

Ammonium hexafluorosilicate (SiF), which is claimed to significantly improve occlusion of dentinal tubules, was proposed as a novel desensitizer for dentine hypersensitivity (DH). However, the cytotoxicity of SiF on oral cells is lacking. The purpose of this study was to investigate the cytotoxicity of SiF on human gingival fibroblasts (hGFs) under different dosages (0.001%, 0.01%, 0.1%, and 1%) and treatment durations (1, 5, 10, and 30min). Cell proliferation, mitochondrial membrane potential (MMP) and cell cycle were tested by MTT assay, JC-1 staining and flow cytometry, respectively. Glutathione (GSH) depletion was analyzed to further investigate the underlying mechanism of SiF-induced cytotoxicity. MTT assay showed that there was significantly lower number of viable cells when the hGFs were treated with 0.01% (10min), 0.1% (10 and 30min) and 1% (5, 10, and 30min) SiF than the control group (p<0.05). MMP decreased and GSH depletion increased dramatically along with higher concentrations (0.1% and 1% SiF) and prolonged times (10 and 30min). DNA synthesis [S (%)] of cells treated with 0.1% and 1% SiF (5, 10, and 30min) was significantly lower than the control group (p<0.05). Our results indicate exposure to up to 0.01% SiF for less than 5min causes low or no cytotoxicity in vitro.

Short-term response of three resin-based materials as desensitizing agents under oral environmental exposure

OBJECTIVE

This paper focuses on clinical responses after 7 days of oral exposure to two resin-based materials as desensitizing agents compared to a fluoride varnish and on morphological and analytical study as a means to elucidate the mechanism of action.

MATERIALS AND METHODS

The elemental composition of Vertise™ Flow (VF), Universal Dentine Sealant (UDS) and Flor-Opal® Varnish (FOV) were investigated by using an X-ray energy dispersive spectrometer (EDX) in conjunction with a scanning electron microscope (SEM). SEM morphology of the material-treated dentine surfaces and pain reduction ability according to the Visual Analogue Scale (VAS) were evaluated in selected hypersensitive teeth. Post treatments and 7 day controls were recorded with SEM and VAS measurements. Clinical data was analysed with the Student's t-test for paired data, with a 5% significance level.

RESULTS

Silicon, ytterbium and alumina were the most present elements in VF, whilst calcium, chloride, silicon and alumina were highest in UDS. Within a 7 day oral environment all the tested materials modified the treated-dentine surfaces showing tubular occlusion of different morphology. Clinically, the efficacy of all materials was similar after a 7-day examination. However, VAS scores were significantly reduced if compared with the baseline (p < 0.05).

CONCLUSIONS

Within the limits of this study, data indicate that both resins are effective in sealing tubules and reducing VAS. A resin-related effect on the dentine's morphology was observed, which may influence the long-term response of the resins in the treatment of dental hypersensitivity, which requires further investigation.

Dentin hypersensitivity: Recent trends in management

Dentinal hypersensitivity (DH) is a common clinical condition usually associated with exposed dentinal surfaces. It can affect patients of any age group and most commonly affects the canines and premolars of both the arches. This article concisely reviews the patho-physiology, mechanism and clinical management of the DH. Treatment of DH should start with an accurate diagnosis. Differential diagnosis should be made and all other probable causes should be excluded. An often neglected phase of clinical management of DH is the identification and treatment of the causative factors of DH. By removing the etiological factors, the condition can be even prevented from occurring or recurring. There are various treatment modalities available which can be used at home or may be professionally applied. The “at home” desensitizing agents include toothpastes, mouthwashes or chewing gums and they act by either occluding the dentinal tubules or blocking the neural transmission. This article also discusses the recent treatment options like bioglass, Portland cement, lasers and casein phosphopeptide.

Effect of desensitising toothpastes on dentinal tubule occlusion: a dentine permeability measurement and SEM in vitro study

OBJECTIVES

The purpose of this study was to evaluate the in vitro effectiveness of a new bioglass-containing and two commercial desensitising toothpastes on dentinal tubule occlusion after citric acid challenge or artificial saliva (AS) immersion.

METHODS

One hundred dentin discs from human third molars were used. Specimens were randomly divided into five groups (n=20), Group 1: EDTA-treated dentin; Group 2: brushing with distilled water; Group 3: brushing with Novamin; Group 4: brushing with Sensodyne Freshmint; Group 5: brushing with Colgate Sensitive. In each group, samples were then equally split into two subgroups (n=10) to test two post-treatments: 6% citric acid challenge or 24h immersion in artificial saliva. Dentine permeability of each specimen was measured before and after each treatment using a hydrostatic device working at 20cm H(2)O pressure. Data were analysed by two-way repeated measures ANOVA to determine if there were any significant differences within or between groups. Dentine morphology and surface deposits were observed by SEM.

RESULTS

All three desensitising toothpastes significantly reduced dentine permeability and created precipitates on the treated dentine surfaces. Moreover, the reductions in dentine permeability showed partial recovery after a citric acid and artificial saliva immersion. Sensodyne showed significant resistant to acid attack and Novamin exhibited the lowest permeability after artificial saliva immersion for 24h.

CONCLUSIONS

The application of the three toothpastes resulted in effective dentinal tubule occlusion. However, the new bioglass-containing toothpaste (Novamin) represented excellent occlusion effects after brushing treatment and AS immersion, while Sensodyne demonstrated more reduction in permeability when citric acid challenged.