Nanohybrid vs. fine hybrid composite in extended Class II cavities after six years

Multifactorial Contributors to the Longevity of Dental Restorations: An Integrated Review of Related Factors

PURPOSE

This integrated review aims to identify and analyze the multifactorial contributors to the longevity of direct restorations, focusing on tooth-, patient-, and dentist-related factors.

MATERIALS AND METHODS

A search of the literature was performed using an electronic database, PubMed/Medline, Web of Science, and Scopus, on papers published between 1980 and 2024. The titles and abstracts of papers that evaluated aspects categorized into tooth-related, patient-related, and dentist-related factors influencing restoration failure were selected and screened. Full-text assessments were conducted, and the extracted data were compiled, summarized, and synthesized. The reference lists of the collected papers were also screened, and relevant citations were included in this review. Data were gathered from clinical and laboratorial studies, systematic reviews, and meta-analyses to provide a comprehensive understanding of restoration longevity.

RESULTS

Among the tooth-related factors, multiple-surface restorations, deep margins, tooth location, and tooth vitality significantly impact restoration survival. Patient-related factors such as medical conditions, risk predictors of caries, age, sex, parafunctional habits, smoking, periodontal health, number of restorations, and socioeconomic status all play crucial roles. Regarding dentist-related factors, the decision-making process, age, experience, and dentist manual dexterity are vital aspects. Furthermore, the technique used, including isolation methods for moisture control, as well as the type of dental practice (large group vs. small practice), notably influenced the restoration survival.

CONCLUSIONS

The longevity of dental restorations is influenced by a complex interplay of tooth-related, patient-related, and dentist-related factors. Strategies to improve restoration outcomes should consider all these multifactorial contributors. Continuing professional education, diligent patient guidance on the factors that influence restoration survival, careful material selection and restorative technique, and tailored individual treatment are crucial factors to reduce failure rates and improve the lifespan of restorations.

In vitro wear behavior of restorative resin composites against bovine enamel

The purpose of this study was to clarify the effects of fabrication method of restorative resin-based composites on its wear using enamel as antagonist teeth. Wear evaluation was performed via two-body wear test using hemispherical samples of restorative resin-based composite (abrader specimen) fabricated through direct restoration method, indirect restoration method, and CAD/CAM, and bovine enamel (substrate specimen). As a result, there was a difference in wear volume between resin-based composite and bovine enamel depending on the fabrication method. Resin composite used for indirect restoration method showed more wear in both the abrader and substrate specimens. Resin composite used for CAD/CAM crowns showed greater wear volume in the abrader specimen. In conclusion, results clarified that fabrication method of restorative resin-based composite has an influence on the wear of the resin composite itself and enamel as antagonist teeth.

Nanofilled/nanohybrid and hybrid resin-based composite in patients with direct restorations in posterior teeth: A systematic review and meta-analysis

OBJECTIVE

A systematic review and a meta-analysis were performed to answer the following research question: Are there differences in the color match and surface texture of nanofilled/nanohybrid and hybrid composite in patients with direct posterior restorations?

DATA

Randomized clinical trials that compared nanofilled/nanohybrid and hybrid composite in direct restoration in posterior teeth were included. For the analysis of the bias the risk of bias tool (RoB) was used. Meta-analyses of different pairs (nanofilled vs. hybrid and nanohybrid vs. hybrid composite) were conducted for surface texture and color match and other secondary outcomes at different follow-ups, using a random effects model. Heterogeneity was assessed with the Cochran Q test and I² statistics. GRADE was used to assess the quality of the evidence.

SOURCES

A search was performed in PubMed, Scopus, Web of Science, LILACS, BBO, Cochrane Library and SIGLE, without restrictions. IADR abstracts (2001-2019), unpublished and ongoing trials registries, dissertations and theses were also searched.

STUDY SELECTION

28 studies remained. No study was considered to be at low RoB; four studies were judged to have high RoB, and the remaining were judged to have unclear RoB.

RESULTS

For the primary and secondary outcomes variables no significant differences were detected between nanofilled/nanohybrid restorations and hybrid composite restorations in any of the study follow-ups (p > 0.08). The body of evidence for surface texture and color match was classified as moderate or low.

CONCLUSION

No evidence of difference was found between nanofilled/nanohybrid and hybrid composite in any of the clinical parameters evaluated.

Shrinkage stress and elastic modulus assessment of bulk-fill composites

Bulk-fill composites were introduced in dentistry to accelerate clinical procedures while providing adequate outcomes. Concerns regarding the use of bigger composite increments rely on the polymerization shrinkage and shrinkage stress, which may generate gaps on the adhesive interface and result in a reduced success rate. Objective: To evaluate the polymerization shrinkage stress of different bulk-fill resin composites and their elastic modulus. Materials and Methods: Fourteen specimens were made for each of the nine different resin composites (seven with 12 mm³ and seven with 24 mm³): Surefill SDR flow (SDR), X-tra Base (XB), Filtek Bulk Fill Flowable (FBF), Filtek Z350XT Flow (Z3F); Tetric Evo Ceram Bulk Fill (TBF), X-tra Fil (XF), Filtek Bulk Fill (FBP), Admira Xtra Fusion (ADM) and Filtek Z350 XT (Z3XT). Linear shrinkage stress was evaluated for 300 s with the aid of a linear shrinkage device adapted to a Universal Testing Machine. For each composite group, seven additional specimens (2x2x25 mm) were made and Young's modulus was evaluated with a 3-point bending device adapted in a Universal Testing Machine with 0.5 mm/min crosshead speed and 50 KgF loading cell. Results: For 12 mm³ specimens, three-way ANOVA showed that only SDR and TBF generated lower stress after 20 s. Considering 300 s, TBF, SDR, and XF generated the lowest stress, followed by ADM, FBP, XB, and FBF, which were similar to Z3XT. Z3F generated the highest stress values for all time points. Considering 24 mm³ specimens after 20 s, all bulk fill composites generated lower stress than Z3XT, except XB. After 300 s, SDR, FBP, and ADM generated the lowest stress, followed by TBF and XF. For elastic modulus, one-way ANOVA showed that FBF, SDR, Z3F, and ADM presented the lowest values, followed by XB and TBF. FBP, Z3XT, and XF presented the highest elastic modulus among the evaluated composites. Conclusions: Bulk-fill resin composites presented equal to lower shrinkage stress generation when compared to conventional composites, especially when bigger increments were evaluated. Bulk-fill composites showed a wide range of elastic modulus values, but usually similar to “regular” composites.

Minimally Invasive Adhesive Rehabilitation for a Patient With Tooth Erosion: Seven-year Follow-up

Tooth wear is a multifactorial condition of growing concern. In clinical practice, it is often a challenge for prevention and treatment since many etiological factors may be involved. This case report describes an esthetic rehabilitation of a young patient presenting tooth wear due to erosion. The etiological factor of this case was the patient sucking on lemons, an acidic fruit. The main complaint of the patient was the appearance of short maxillary incisors. The treatment involved orthodontic and restorative dentistry techniques. First of all, an orthodontic device was used to increase the vertical dimension of occlusion and create an adequate space for the direct restorations. The posterior teeth were restored with two direct composite resin techniques; the anterior teeth were then restored using a balanced occlusion. The seven-year follow-up of the case is presented. Replicas of the restorations were made and visualized under scanning electron microscopy up to the 12-month evaluation. In the clinical follow-up at seven years, maintenance of the results and restorations can be clearly seen.

Delayed post-curing stage and oxygen inhibition of free-radical polymerization of dimethacrylate resin

OBJECTIVE

It is known that after light-initiated free radical polymerization of a dimethacrylate monomer system, the curing continues for some period of time after the curing light emission has stopped (so-called delayed post-curing stage, DPCS). It is also known that during free radical polymerization, the presence of oxygen effectively inhibits polymerization of monomers. However, less is known of the influence of oxygen inhibition of light initiated polymerization during the DPCS. The aim of this study was to determine some polymerization related properties of a resin system during the DPCS.

METHODS

Monomer systems of BisGMA-TEGDMA (60/40%) with light sensitive initiator-activator (camphorquinone-amine) system were polymerized by light-initiation (wavelength average 430-480nm) with a radiation intensity of 1200mW/mm² for 20s on the ATR sensor of the fourier transform infrared (FTIR) spectrometer. After light curing, the samples were divided into two groups: the DPCS stage was allowed to continue in air (O₂-exposed group) or the samples were protected from the direct effect of air (O₂-protected group). The degree of monomer conversion (DC%) was monitored from the sample surface up to 360min from both groups of samples (n=6). Sample surfaces were additionally analyzed for surface microhardness (VHN) at four time-points corresponding to time-points of the DC% measurement (n=6).

RESULTS

After ending the light-curing of 20s, i.e. during the DPCS, the DC% still increased from 50% to 65% in the O₂-protected group, whereas no increase was seen in the O₂-exposed group. Surface microhardness increased from 2.99 to 9.10 VHN of the O₂-protected samples and to 4.80 of the O₂-exposed samples during a 6-h period. Surface microhardness differed significantly between the groups (p<0.005). There was significant correlation between the microhardness and DPCS (O₂-protected r=0.950; O₂-exposed r=0.940, p<0.001). A correlation was also found between degree of conversion values and DPCS time (O₂-protected r=0.941; for O₂-exposed r=0.780, p<0.001).

SIGNIFICANCE

The results of this study suggested that O₂-inhibition of free radical polymerization of dimethacrylate resin occurred after ending the curing light emission. This correlated with a lower surface microhardness of the polymer when the DPCS continued under air-exposure.

Do Nanofilled/Nanohybrid Composites Allow for Better Clinical Performance of Direct Restorations Than Traditional Microhybrid Composites? A Systematic Review

This systematic review was carried out to assess the clinical effectiveness of nanofilled and nanohybrid composites used for direct restorations in comparison with microhybrid composites. The guidelines for the preferred reporting items for systematic reviews and meta-analyses were followed. A search of articles published from July 1996 to February 2017 was performed in PubMed, SciVerse Scopus, Latin American and Caribbean Health Sciences, the Scientific Electronic Library Online, and the Cochrane Library. The present review selected only randomized controlled trials comparing the clinical performance of a nanofilled or nanohybrid composite for direct restorations with that of a microhybrid composite. The research found 201 studies. Twenty-one articles fulfilled the criteria of the present review. However, the included studies were characterized by great methodological diversities. As a general trend, nanofilled and nanohybrid composites were found to be capable of clinical performance, marginal quality, and resistance to wear similar to that of traditional composites without showing improved surface characteristics. The risk of bias of included studies was judged unclear or high. The clinical performance of nanofilled/nanohybrid composites was found to be comparable to that of traditional composites in the posterior area. The data concerning anterior and cervical restorations were insufficient. With regard to the esthetic properties, there is a compelling need for studies on anterior teeth in which the operators are kept unaware of the restorative material. Nanofilled/nanohybrid composites seem to be a valid alternative to traditional microhybrid composites, and at the moment, there is low-level evidence attesting a lack of their superiority.

Failure rate of single-unit restorations on posterior vital teeth: A systematic review

STATEMENT OF PROBLEM

No knowledge synthesis exists concerning when to use a direct restoration versus a complete-coverage indirect restoration in posterior vital teeth.

PURPOSE

The purpose of this systematic review was to identify the failure rate of conventional single-unit tooth-supported restorations in posterior permanent vital teeth as a function of remaining tooth structure.

MATERIAL AND METHODS

Four databases were searched electronically, and 8 selected journals were searched manually up to February 2015. Clinical studies of tooth-supported single-unit restorative treatments with a mean follow-up period of at least 3 years were selected. The outcome measured was the restorations' clinical or radiological failure. Following the Preferred Reporting Items for Systematic reviews and Meta-Analyses guidelines, the Cochrane Collaboration procedures for randomized control trials, the Strengthening the Reporting of Observational Studies in Epidemiology criteria for observational studies, 2 reviewers independently applied eligibility criteria, extracted data, and assessed the quality of the evidence of the included studies using the American Association of Critical Care Nurses' system. The weighted-mean group 5-year failure rates of the restorations were reported according to the type of treatment and remaining tooth structure. A metaregression model was used to assess the correlation between the number of remaining tooth walls and the weighted-mean 5-year failure rates.

RESULTS

Five randomized controlled trials and 9 observational studies were included and their quality ranged from low to moderate. These studies included a total of 358 crowns, 4804 composite resins, and 303582 amalgams. Data obtained from the randomized controlled trials showed that, regardless of the amount of remaining tooth structure, amalgams presented better outcomes than composite resins. Furthermore, in teeth with fewer than 2 remaining walls, high-quality observational studies demonstrated that crowns were better than amalgams. A clear inverse correlation was found between the amount of remaining tooth structure and restoration failure.

CONCLUSIONS

Insufficient high-quality data are available to support one restorative treatment or material over another for the restoration of vital posterior teeth. However, the current evidence suggests that the failure rates of treatments may depend on the amount of remaining tooth structure and types of treatment.

A 3-year randomized clinical trial evaluating two different bonded posterior restorations: Amalgam versus resin composite

Objective:

To compare the performance and postoperative sensitivity of a posterior resin composite with that of bonded amalgam in 40 (n = 20) large sized cavities and to evaluate whether resin composite could be an alternative for bonded amalgam.

Materials and Methods:

This was a randomized clinical trial. Twenty patients in need of at least two posterior restorations were recruited. Authors randomly assigned one half of the restorations to receive bonded amalgam and the other half to composite restorations. Forty bonded amalgams (n = 20) and composites (n = 20) were evaluated for their performance on modified-US Public Health Service criteria and postoperative sensitivity using visual analogue scale (VAS) for 36-months.

Results:

Success rate of this study was 100%. First clinical alterations were rated as Bravo after 1 year in marginal discoloration, marginal adaptation, anatomical form, and surface roughness for both amalgam and composite. At the 3^rd year, overall “Bravo” rated restorations were 12 for bonded amalgam and 13 for resin composites. There were no significant differences among the VAS scores of composites and bonded amalgams for all periods (P > 0.05) except for the comparisons at the 3^rd year evaluation (P < 0.05).

Conclusions:

Within the limitation of this study, both resin composite and bonded amalgam were clinically acceptable. Postoperative sensitivity results tend to decrease more in composite restorations rather than amalgams. Therefore, it was concluded that posterior resin composite can be used even in large sized cavities.

One-year clinical evaluation of different types of bulk-fill composites

AIM

In the present study, we evaluated the 1-year clinical performance of a conventional posterior composite resin and three bulk-fill composite resins.

METHODS

Fifty patients with four class II restorations under occlusion were enrolled in the present study. A total of 200 restorations were placed in the cavity, 50 for each material (Clearfil Photo Posterior, Filtek Bulk-Fill Flowable and Filtek P60, Tetric EvoCeram Bulk-Fill, and SonicFill). One operator placed the restorations in the cavity, and 1 week later the patients were called for baseline examination. Two calibrated examiners evaluated the restorations once every 3 months for 1 year, according to United States Public Health Service criteria. The data were analyzed using SPSS. Non-parametric tests (Kruskal-Wallis, Mann-Whitney U-test, and Friedman) were used for the analysis at a confidence level of 95%.

RESULTS

The 1-year recall rate was 86%. All restorations showed minor modifications after 1 year. However, no statistically-significant differences were detected between the materials' performance at baseline and after 1 year for all criteria (P > 0.05).

CONCLUSIONS

The bulk-fill composite resin materials showed similar clinical performance when compared with a conventional posterior composite resin. Further evaluations are necessary for the long-term clinical performance of these materials.

Survival characteristics of composite restorations in primary teeth

OBJECTIVES

This retrospective study analyzed restoration survival of composite fillings in children with at high caries risk in relation to age, sex, operator, tooth type, filling extension, and material used.

MATERIALS AND METHODS

Among 667 children treated in 2004-2012 in a university setting without sedation or general anesthesia, 2388 composite fillings were included. Relevant data from regular recall intervals were retrieved from patients' records. Either total-etch or a self-etch adhesive combined with flowable and/or (nano)hybrid composite was used. The Kaplan-Meier estimator and Cox proportional hazard analysis with backward elimination model were applied for survival analysis.

RESULTS

For the observation period of 8 years (mean 1.7 years), the cumulative failure rate was 17.2 % with annual failure rates of 10.0 %. In 8.8 % of the cases, fillings failed due to secondary caries. In 8.3 % technical failure due to total filling loss, loosening, marginal gaps, or tooth fracture occurred. Tooth type, filling extension, age, operator, dental dam, and type of adhesive were significant for survival (p < 0.05).

CONCLUSIONS

Filling survival was comparably lower to composite restorations observed in prospective clinical studies on permanent teeth and other tooth-colored restoratives used in primary teeth. Due to the very high caries risk and young age of the population, frequent loss due to secondary caries was observed. With respect to the high caries risk, composite restorations can be used to treat carious primary teeth, though a strict caries prevention regimen should be followed to minimize restoration failure.

CLINICAL RELEVANCE

Filling loss of composites in the primary dentition is associated with secondary caries on the long term.

Resin composite class I restorations: a 54-month randomized clinical trial

The objective of this longitudinal clinical randomized trial was to evaluate the clinical performance of a nanofilled and a nanohybrid resin composite in Class I occlusal restorations of posterior teeth over the course of 54 months. Forty-one adolescents participated in the study. The teeth were restored with Adper Single Bond 2 (3M ESPE) and nanofilled (Filtek Z350, 3M ESPE), nanohybrid (Esthet-X, Dentsply) and microhybrid Filtek Z250 (3M ESPE) used as a control. After 54 months, the restorations were evaluated in accordance with the modified United States Public Health Service criteria. The McNemar and Friedman tests were used for statistical analysis, at a level of significance of 5%. Five failed restorations were observed during the follow-up. A change to unacceptable restoration occurred for one Esthet-X, two Filtek Z350, and two Filtek Z250 restorations, which received the clinically unacceptable score, Charlie, for both anatomic form and marginal adaptation. Secondary caries and postoperative sensitivity occurred in one Filtek Z250 and one Filtek Z350 restoration. When the five evaluation periods (baseline and six, 12, 30, and 54 months) were compared, significant differences were found in the marginal adaptation of Filtek Z250 and Filtek Z350. Significant differences in the roughness criteria (p=0.005) were also observed when the three composites were compared after 54 months (Filtek Z350 > Filtek Z250 > Esthet-X), always within clinically acceptable limits. The materials investigated showed acceptable clinical performance for Class I restoration after 54 months. Long-term reevaluations are necessary for a more detailed analysis of these composites.

Longevity of posterior composite restorations: a systematic review and meta-analysis

The aim of this meta-analysis, based on individual participant data from several studies, was to investigate the influence of patient-, materials-, and tooth-related variables on the survival of posterior resin composite restorations. Following Preferred Reporting Items for Systematic Reviews and Meta-Analyses (PRISMA) guidelines, we conducted a search resulting in 12 longitudinal studies of direct posterior resin composite restorations with at least 5 years' follow-up. Original datasets were still available, including placement/failure/censoring of restorations, restored surfaces, materials used, reasons for clinical failure, and caries-risk status. A database including all restorations was constructed, and a multivariate Cox regression method was used to analyze variables of interest [patient (age; gender; caries-risk status), jaw (upper; lower), number of restored surfaces, resin composite and adhesive materials, and use of glass-ionomer cement as base/liner (present or absent)]. The hazard ratios with respective 95% confidence intervals were determined, and annual failure rates were calculated for subgroups. Of all restorations, 2,816 (2,585 Class II and 231 Class I) were included in the analysis, of which 569 failed during the observation period. Main reasons for failure were caries and fracture. The regression analyses showed a significantly higher risk of failure for restorations in high-caries-risk individuals and those with a higher number of restored surfaces.

Antibacterial effect of dental adhesive containing dimethylaminododecyl methacrylate on the development of Streptococcus mutans biofilm

Antibacterial bonding agents and composites containing dimethylaminododecyl methacrylate (DMADDM) have been recently developed. The objectives of this study were to investigate the antibacterial effect of novel adhesives containing different mass fractions of DMADDM on Streptococcus mutans (S. mutans) biofilm at different developmental stages. Different mass fractions of DMADDM were incorporated into adhesives and S. mutans biofilm at different developmetal stages were analyzed by MTT assays, lactic acid measurement, confocal laser scanning microscopy and scanning electron microscopy observations. Exopolysaccharides (EPS) staining was used to analyze the inhibitory effect of DMADDM on the biofilm extracellular matrix. Dentin microtensile strengths were also measured. Cured adhesives containing DMADDM could greatly reduce metabolic activity and lactic acid production during the development of S. mutans biofilms (p < 0.05). In earlier stages of biofilm development, there were no significant differences of inhibitory effects between the 2.5% DMADDM and 5% DMADDM group. However, after 72 h, the anti-biofilm effects of adhesives containing 5% DMADDM were significantly stronger than any other group. Incorporation of DMADDM into adhesive did not adversely affect dentin bond strength. In conclusion, adhesives containing DMADDM inhibited the growth, lactic acid production and EPS metabolism of S. mutans biofilm at different stages, with no adverse effect on its dentin adhesive bond strength. The bonding agents have the potential to control dental biofilms and combat tooth decay, and DMADDM is promising for use in a wide range of dental adhesive systems and restoratives.

Marginal adaptation of class II cavities restored with bulk-fill composites

OBJECTIVES

To determine the marginal adaptation of bulk-fill composites in class II MO cavities.

METHODS

Standardized class II MO cavities with bevelled enamel margins were prepared in 40 extracted human molars. The teeth were randomly assigned to one of the five experimental groups (n=8). The teeth were restored with two horizontal increments of composite (4mm and 2mm thickness). The experimental groups were (1st/2nd increment): Gr. A - Venus Bulk-Fill/Venus Diamond; Gr. B - Tetric EvoCeram BulkFill/Tetric EvoCeram; Gr. C - Surefil SDR/Ceram-X; Gr. D - SonicFill; Gr. E - Ceram-X/Ceram-X (control). After finishing procedures, impressions were made using a polyvinyl siloxane and epoxy resin replicas were obtained. Thermo-mechanical stressing was carried out 24h after the restorative procedure. All specimens were submitted to 240,000 occlusal loading and simultaneous 600 thermal cycles in water at 5°C and 50°C. After loading, a new set of epoxy resin replicas was obtained. Scanning electron microscopy was carried out at 200× magnification. Results for the marginal adaptation were expressed as percentages of continuity relative to the exposed interface and analyzed by ANOVA and Duncan post hoc test (p<0.05).

RESULTS

In enamel, no significant differences were detected before and after thermo-mechanical loading between groups. In dentine, the worst results were observed in Gr.

A CONCLUSION

By applying simple layering techniques, bulk-fill materials do not allow better marginal adaptation than a standard composite.

CLINICAL SIGNIFICANCE

A new class of resin-base composite (bulk-fill) was recently launched on the market. The bulk-fill composites exhibited adequate marginal adaptation and similar to the results of the standard composite.

Patient Risk Factors’ Influence on Survival of Posterior Composites

This practice-based retrospective study evaluated the survival of resin composite restorations in posterior teeth, focusing on the influence of potential patient risk factors. In total, 306 posterior composite restorations placed in 44 adult patients were investigated after 10 to 18 yrs. The history of each restoration was extracted from the dental records, and a clinical evaluation was performed with those still in situ. The patient risk status was assessed for caries and “occlusal-stress” (bruxism-related). Statistical analysis was performed by the Kaplan–Meier method and Cox-regression multivariate analysis. In total, 30% of the restorations failed, of which 82% were found in patients with 1 or 2 risk factors. Secondary caries was the main reason of failure within caries-risk patients, whereas fracture was the main reason in “occlusal-stress-risk” patients. The patient variables gender and age did not significantly affect survival, but risk did ( p < .001). Tooth type ( p < .001), arch ( p = .013), and pulpal vitality ( p = .003) significantly affected restoration survival. Within the limits of this retrospective evaluation, the survival of restorations is affected by patient risk factors, which should be included in survival analyses of restorations.

Fiber-reinforced resin coating for endocrown preparations: a technical report

Coronal rehabilitation of endodontically treated posterior teeth is still a controversial issue. Although the use of classical crowns supported by radicular metal posts remains widespread in dentistry, their invasiveness has been largely criticized. New materials and therapeutic options based entirely on adhesion are available nowadays, from direct composite resins to indirect endocrowns. They allow for a more conservative, faster, and less expensive dental treatment. However, the absence of a metal or high-strength ceramic substructure as in full-crown restorations can expose this kind of restoration to a higher risk of irreversible fracture in case of crack propagation. The aim of this case report is to present a technique to reinforce the cavity of an endodontically treated tooth by incorporating a fiber-reinforced composite (FRC) layer into the resin coating of the tooth preparation, before the final impressions of the cavity. This technique allows the use of FRCs in combination with any kind of restorative material for an adhesive overlay/endocrown.

Dental plaque microcosm biofilm behavior on calcium phosphate nanocomposite with quaternary ammonium

OBJECTIVES

Half of dental restorations fail in 10 years, with secondary caries as the main reason. Calcium phosphate composites could remineralize tooth lesions. The objectives of this study were to: (1) impart antibacterial activity to a composite with nanoparticles of amorphous calcium phosphate (NACP); and (2) investigate the effect of quaternary ammonium dimethacrylate (QADM) on mechanical and dental plaque microcosm biofilm properties for the first time.

METHODS

The NACP and glass particles were filled into a dental resin that contained bis(2-methacryloyloxy-ethyl) dimethyl-ammonium bromide, the QADM. NACP nanocomposites containing 0%, 7%, 14%, and 17.5% of QADM by mass, respectively, were photo-cured. A commercial composite with no antibacterial activity was used as control. Mechanical properties were measured in three-point flexure. A human saliva microcosm model was used to grow biofilms on composites. Live/dead assay, metabolic activity, colony-forming unit (CFU) counts, and lactic acid production of biofilms on the composites were measured.

RESULTS

Increasing QADM mass fraction monotonically reduced the biofilm viability, CFU and lactic acid. Biofilms on NACP nanocomposite with 17.5% QADM had metabolic activity that was 30% that on a commercial composite control (p<0.05). Total microorganisms, total streptococci, and mutans streptococci CFU counts (mean ± sd; n = 6) on composite control was 6-fold those on NACP +17.5% QADM nanocomposite. Composite control had long strings of bacterial cells with normal short-rod shapes, while some cells on NACP-QADM nanocomposites disintegrated into pieces. Adding QADM to NACP did not decrease the composite strength and elastic modulus, which matched (p>0.1) those of a commercial composite without Ca-PO(4) or antibacterial activity.

SIGNIFICANCE

A dental plaque microcosm model was used to evaluate the novel NACP-QADM nanocomposite. The nanocomposite greatly reduced the biofilm viability, metabolic activity and lactic acid, while its mechanical properties matched those of a commercial composite. NACP-QADM nanocomposite with calcium phosphate fillers, good mechanical properties and a strong antibacterial activity may have potential for anti-biofilm and anti-caries restorations.

Laser fluorescence of dentin caries covered with a novel nano-filled sealant

The aim of the present study was to assess the possibility to measure caries-induced laser fluorescence underneath a novel nano-filled fissure sealant. Sixty freshly extracted human teeth with occlusal dentine carious lesions were horizontally divided, exposing the respective lesion. Teeth were randomly assigned to three groups: (I) white fissure sealant with filler particles (Fissurit F, Voco), (II) clear fissure sealant without filler particles (Fissurit, Voco) and (III) novel experimental fissure sealant with nano-filler particles (Voco). Starting with a sealant thickness of 3 mm, laser fluorescence measurements (DIAGNOdent, KaVo) were performed after finishing the sealant surfaces with polishing papers, reducing the material at intervals of 0.5 mm until the sealant was removed completely. Evaluating a thickness of 0.5 mm, both the clear (83 % of the baseline fluorescence after fine grit polishing) and the white sealant (25 %) did not allow to measure baseline fluorescence (p < 0.05) with no fluorescence reduction in the experimental sealant group (p > 0.05). With increasing sealer thickness, fluorescence was influenced even by the experimental material (89 % of the baseline value at 1 mm). However, by using the experimental material, statistically significant higher fluorescence values than those for the other materials under study (p < 0.05) were obtained. Thicker sealant layers and coarse grit polishing caused a decrease of laser fluorescence in all groups (p < 0.05). Employing the experimental nano-filled sealant, laser fluorescence measurements for caries detection can be performed through thicker sealant layers compared to conventional sealant materials. Thus, it might be possible to use this material to assess a caries progression underneath the sealant and administer an appropriate therapy in due time.