The durability of phosphoric acid promoted bioglass-dentin interaction layer

Desensitizing efficacy of a universal dentin adhesive containing mesoporous bioactive glass on dentin hypersensitivity: a randomized clinical trial with a split-mouth model

This split-mouth blinded randomized controlled study compared the efficacy of a desensitizing agent with oxalate/resin polymer and a universal adhesive containing mesoporous bioactive glass (MBG) for dentin hypersensitivity (DH) relief, using Schiff sensitivity score (SSS) and visual analog scale (VAS). Split quadrants containing teeth with DH were treated with either MS Coat ONE or Hi-Bond Universal with MBG as the functional additive. Assessments at baseline, immediately post-application, and at 1- and 2-week follow-ups used standardized stimulus protocols (air, cold, and acid). The SSS difference was the primary outcome, while the VAS difference was the secondary outcome. A mixed linear effect model performed statistical analysis. Immediate DH reduction occurred in response to air stimuli, with a significant decrease in Group HB than in Group MS (p = 0.0178). Cold stimulus reduction exhibited a gradual cumulative effect, with consistently greater reductions in Group HB than in Group MS (p ≤ 0.0377). Both groups effectively managed acidic stimuli, with no significant differences (p > 0.05). The VAS scores decreased gradually over the follow-up period (p < 0.0001). This study highlights the differential efficacy of treatments for various DH triggers and recommends specific approaches based on different stimulus types. The universal adhesive containing MBG demonstrated DH relief potential, promising efficacy identical to or superior to that of a dedicated desensitizing agent. Further research exploring the long-term efficacy and underlying mechanisms is warranted. The universal adhesive containing MBG can be adopted as an in-office desensitizing agent for DH relief. The desensitizing efficacy of universal adhesive matches or surpasses dedicated agents for air and cold stimuli.

Effect of air-abrasion pretreatment with three desensitizing agents on efficacy of in-office tooth bleaching

OBJECTIVE

To evaluate the influence of air-abrasion of enamel with three different desensitizing powders on the whitening effect of a bleaching gel containing 40% H2O2, which was used for in-office tooth bleaching.

MATERIALS AND METHODS

Forty human incisors, extracted and prepared, were acquired for this study and subsequently randomized into four groups (n = 10). The control group specimens underwent no pretreatment prior to the bleaching procedure, whereas the remaining three groups underwent air abrasion using distinct desensitizing powders; (a) Sylc, which contains bioglass 45S5; (b) BioMinF, which contains calcium phospho-fluoro-silicate glass; and (c) MI Pearls, which contains nano-hydroxyapatite, 1 h preceding the Opalescence Boost PF 40% bleaching procedure. Color measurements were conducted using a double-beam UV-Vis spectrophotometer at four distinct time points (prior to bleaching, 24 h, 15 days, and 30 days post-bleaching).

RESULTS

Tooth color change outcomes revealed that there were no statistically significant results with respect to the interaction of the two criteria (treatments and time) (p = 0.990). Additionally, there were no statistically significant results with respect to the main effects of treatments (p = 0.385), while there were statistically significant effects with respect to the time criterion (p = 0.013).

CONCLUSIONS

The use of the tested desensitizing powders prior the bleaching procedure did not affect the tooth color change induced by the tested bleaching agent.

CLINICAL SIGNIFICANCE

Tooth color change and whiteness are not affected by air-abrasion desensitizing treatments when applied prior to in-office bleaching procedures.

A novel mussel-inspired desensitizer based on radial mesoporous bioactive nanoglass for the treatment of dentin exposure: An in vitro study

OBJECTIVES

The dentin exposure always leads to dentin hypersensitivity and the acid-resistant/abrasion-resistant stability of current therapeutic approaches remain unsatisfatory. Inspired by the excellent self-polymerization/adherence activity of mussels and the superior mineralization ability of bioactive glass, a novel radial mesoporous bioactive nanoglass coated with polydopamine (RMBG@PDA) was developed for prevention and management of dentin hypersensitivity.

METHODS

Radial mesoporous bioactive nanoglass (RMBG) was synthesized by the sol-gel process combined with the cetylpyridine bromide template self-assembly technique. RMBG@PDA was synthesized by a self-polymerization process involving dopamine and RMBG in an alkaline environment. Then, the nanoscale morphology, chemical structure, crystalline phase and Zeta potential of RMBG and RMBG@PDA were characterized. Subsequently, the ion release ability, bioactivity, and cytotoxicity of RMBG and RMBG@PDA in vitro were investigated. Moreover, an in vitro experimental model of dentin hypersensitivity was constructed to evaluate the effectiveness of RMBG@PDA on dentinal tubule occlusion, including resistances against acid and abrasion. Finally, the Young's modulus and nanohardness of acid-etched dentin were also detected after RMBG@PDA treatment.

RESULTS

RMBG@PDA showed a typical nanoscale morphology and noncrystalline structure. The use of RMBG@PDA on the dentin surface could effectively occlude dentinal tubules, reduce dentin permeability and achieve excellent acid- and abrasion-resistant stability. Furthermore, RMBG@PDA with excellent cytocompatibility held the capability to recover the Young's modulus and nanohardness of acid-etched dentin.

CONCLUSION

The application of RMBG@PDA with superior dentin tubule occlusion ability and acid/abrasion-resistant stability can provide a therapeutic strategy for the prevention and the management of dentin hypersensitivity.

Comparative analysis of the effect of Bioactive Glass 45S5 on enamel erosion progression in human dentitions (in vitro study)

OBJECTIVES

The aim of the present study was to compare the surface morphology alterations, mineral content, and surface roughness of eroded enamel surface versus eroded enamel surface which was preceded by Bioactive Glass 45S5 (BAG45S5) application in both primary and permanent human dentitions.

MATERIALS AND METHODS

Fifty-two primary teeth and fifty-two permanent teeth were selected. Teeth were randomly divided into 4 groups of twenty-six teeth each. Groups A1 and B1 underwent erosion with 1% citric acid, while groups A2 and B2 were subjected to application of BAG45S5 powder followed by the same erosive conditions as A1 and B1. Measurements were performed by scanning electron microscopy (SEM), energy-dispersive X-ray spectroscopy (EDX), and surface profilometry. They were used to examine the surface morphology alterations, mineral content, and surface roughness, respectively.

RESULTS

SEM of enamel which received BAG45S5 showed smoother surface in primary teeth post erosion. EDX analysis showed that enamel exhibited crucial resistance to mineral loss in the group which received BAG45S5 prior to inducing erosion as compared to the induced erosion-only group. This was significant (p < 0.005) in both human dentitions. Erosion-only groups showed significantly less surface roughness in permanent teeth (p < 0.045). A marked decrease in surface roughness was observed in surfaces receiving BAG45S5, primary teeth (p < 0.001), and permanent teeth (p < 0.001).

CONCLUSIONS

Bioactive Glass 45S5 proved successful against erosive conditions in both primary and permanent teeth with better performance in the permanent teeth so it can be regarded as a means of prevention.

CLINICAL RELEVANCE

Bioactive Glass 45S5 powder could be used not only to remove stains but also as a prophylactic preventive measure against the multiple episodes of acidic food and beverage consumption in children.

Evaluation of Bioactive Glass and Low Viscosity Resin as Orthodontic Enamel Sealer: An In Vitro Study

The study aimed to evaluate the effect of applying fluoride bioactive glass (FBAG) and Alpha-Glaze® (resin sealer) on the shear bond strength of orthodontic brackets to enamel bonded by Transbond XT, brushing−abrasion durability, and their protective effect against simulated cariogenic acidic attack. Materials include 135 extracted premolars that were divided into three groups—FBAG, Alpha-Glaze, and control. The shear bond strength test was measured using an Instron Universal Testing Machine. The brushing abrasion challenge took place with a tooth-brushing simulator. Transmitted light microscopy examinations were performed after the specimens were demineralized for 4 days. The results show that the shear bond strength values of the three groups did not report any statistically significant differences: FBAG (28.1 ± 5.5 Mpa), Alpha-Glaze (32.5 ± 7.4 Mpa), and control (30.7 ± 6.5 Mpa) p < 0.05. The Adhesive Remenant Index (ARI) study showed chipping of enamel in 6.6% of Alpha-Glaze and control specimens and 40% of specimens had their enamel surface covered with resin. Furthermore, 30% of the FBAG and 100% of the Alpha-Glaze sealer specimens resisted the abrasion test. In conclusion, FBAG can serve as an orthodontic-sealer capable of protecting the enamel surface surrounding orthodontic brackets. However, the Alpha-Glaze sealer did not offer the capability of protecting the enamel.

Effect of citric acid erosion on enamel and dentin and possible protection by a novel bioactive borate adhesive system

OBJECTIVES

This study examined the ability of a borate adhesive to protect enamel/dentin surfaces from acidic erosion and its effect on the shear bond strength (SBS) of enamel/dentin to resin composite.

MATERIALS AND METHODS

180 human enamel/dentin specimens were utilized. Enamel buccal surfaces were etched with phosphoric-acid then divided into: (EBG) borate glass adhesive group; (ERS) resin-adhesive system group; (EF) fluoride gel 1.23% group, and enamel control (EC) group; followed by bonding to orthodontic-buttons. The dentin specimens were conditioned by EDTA (Ethylene-diamine-tetra-acetic acid) and divided into: (DBG) borate glass resin, (DRS) resin adhesive; (DDA) group had a dentin-desensitizing agent VivaSens (VivaDent, Liechtenstein) and (DC) control group. The treated enamel/dentin specimens had their SBS to composite. The enamel/dentin specimens were exposed to 1% citric acid (18 min). Enamel/dentin specimens were examined by (SEM/EDS) scanning-electron-microscope equipped with electron-dispersive-spectroscopy and (FTIR/ATR). Analysis-of-Variance (ANOVA) was used to compare the SBS and Wilcoxon-signed-rank test was used to compare the enamel/dentin areas protected by the applied agents before/after erosion (p = 0.05).

RESULTS

There was no significance difference in SBS among all groups except for (DDA) group that showed significant decrease p < 0.05. (EBG) and (DBG) groups were the only groups significantly protected enamel and dentin from erosion p < 0.05. FTIR/ATR showed that erosion altered the chemical structure of (DRS), (DDA), and (DC) groups but did not affect the other enamel/dentin groups. Degree of conversion of the borate-adhesive system was acceptable.

CONCLUSION

The Borate adhesive system released calcium and phosphate compounds that decreased the erosive activity of the citric acid resulting in protecting simulated dentin-hypersensitive areas and enamel from erosion without affecting the SBS to resin-composite.

CLINICAL SIGNIFICANCE

A Borate adhesive system can be adopted as a therapeutic agent in a fully integrated program for protecting dentin-hypersensitive areas and in enamel next to orthodontic fixed appliances.

Zwitterionic/phosphonate copolymer coatings endow excellent antifouling properties and robust re-mineralization ability of dentine substrates

Inhibition of biofilm formation and induction of the re-mineralization of damaged dental tissues are two major strategies to combat dental hypersensitivity (DH). However, single component synthetic materials normally cannot fulfil these two functions during the repairing of damaged dental tissues. Here, we report zwitterionic phosphorylcholine based polymers to be a new type of dual functional coating for the repairing of DH. Zwitterionic/phosphonate copolymers, p(DEMMP-co-MPC), bearing varied zwitterionic contents (95 and 75 mol%) were prepared through conventional radical copolymerization. ¹H NMR spectroscopy clearly indicated the precise preparation of the copolymers. The copolymers can be easily coated on dentine substrates based on the high affinity between the phosphonate group and the calcium phosphate minerals of the dentine substrates, as evidenced by XPS and water contact angle measurements. Antifouling evaluations indicated that zwitterionic coating can efficiently inhibit protein adsorption (BSA, egg white, and milk, by 85%) and bacterial adhesion (by 97.1%) on dentine substrates. Furthermore, in vitro and in vivo experiments consistently indicated that the zwitterionic coating could not only induce the robust re-mineralization of dentine surfaces, but also template the extensive re-mineralization of dentine tubules to a similar level of pristine dentine. Both the antifouling properties and the re-mineralization potency are positively correlated with the content of zwitterionic pMPC in the coating copolymer. These findings may provide the zwitterionic phosphorylcholine based materials to be a promising candidate to treat dental hypersensitivity and other related dental diseases.

Effect of Dentin Desensitizer Containing Novel Bioactive Glass on the Permeability of Dentin

The objective of this study was to evaluate the effect of novel bioactive glass (BAG)-containing desensitizers on the permeability of dentin. Experimental dentin desensitizers containing 3 wt% BAG with or without acidic functional monomers (10-MDP or 4-META) were prepared. A commercial desensitizer, Seal & Protect (SNP), was used as a control. To evaluate the permeability of dentin, real-time dentinal fluid flow (DFF) rates were measured at four different time points (demineralized, immediately after desensitizer application, after two weeks in simulated body fluid (SBF), and post-ultrasonication). The DFF reduction rate (ΔDFF) was also calculated. The surface changes were analyzed using field emission scanning electron microscopy (FE-SEM). Raman spectroscopy was performed to analyze chemical changes on the dentin surface. The ΔDFF of the desensitizers containing BAG, BAG with 10-MDP, and BAG with 4-META significantly increased after two weeks of SBF storage and post-ultrasonication compared to the SNP at each time point (p < 0.05). Multiple precipitates were observed on the surfaces of the three BAG-containing desensitizers. Raman spectroscopy revealed hydroxyapatite (HAp) peaks on the dentin surfaces treated with the three BAG-containing desensitizers. Novel BAG-containing dentin desensitizers can reduce the DFF rate about 70.84 to 77.09% in the aspect of reduction of DFF through the HAp precipitations after two weeks of SBF storage.

A Bioactive Enamel Sealer Can Protect Enamel during Orthodontic Treatment: An In Vitro Study

Background: This study aimed to evaluate the effectiveness of an experimental bioactive enamel resin sealer in protecting the enamel adjacent to orthodontic brackets against erosion. Methods: Orthodontic brackets (n = 50) were bonded to freshly extracted, sound maxillary premolars using Transbond™ XT Primer (3M Unitek, Monrovia, CA, USA) and Transbond Plus Color Change adhesive (3M Unitek, USA). Five experimental groups (n = 10) had the following treatments applied: a resin bioactive sealer with 45S5 bioglass, 35% by weight; a resin sealer without bioactive glass; fluoride; the orthodontic sealer, Opal Seal (Opal-Orthodontics, South Jordan, UT, USA); and, in the control group, an untreated surface. All the specimens were stored for 18 min in 1% citric acid. All the specimens were examined by SEM and electron dispersive spectroscopy (EDS). The Wilcoxon signed-rank test was used to compare the enamel surfaces covered by the sealers before and after the acid challenge. Attenuated total reflectance Fourier transform infrared spectroscopy detected the degree of the experimental resins’ conversion to verify their suitability for clinical use. Results: The percentage of the bioactive resin sealer and Opal Seal groups’ protection against enamel erosion was 100%, which was significantly more than the other groups, p < 0.05. The degree of conversion for the bioactive and unfilled resins was 42.4% ± 3.6% and 48.57% ± 5%, respectively. Conclusion: The bioactive resin sealer and the Opal Seal both protected the enamel from erosion.

Physicochemical Properties, Cytocompatibility, and Biocompatibility of a Bioactive Glass Based Retrograde Filling Material

The ideal retrograde filling material that is easy to handle, has good physicochemical properties, and is biocompatible has not yet been developed. The current study reports the development of a novel bioactive glass based powder for use as a retrograde filling material that is capable of altering the consistency and hardening rate of mixtures when mixed with existing bioactive glass based cement. Furthermore, its physicochemical properties, in vitro effects on human cementoblast-like cells, and in vivo effects on inflammatory responses were evaluated. The surface of the hardened cement showed the formation of hydroxyapatite-like precipitates and calcium and silicate ions were eluted from the cement when the pH level was stabilized at 10.5. Additionally, the cement was found to be insoluble and exhibited favorable handling properties. No adverse effects on viability, proliferation, and expression of differentiated markers were observed in the in vitro experiment, and the cement was capable of inducing calcium deposition in the cells. Moreover, the cement demonstrated a lower number of infiltrated inflammatory cells compared to the other materials used in the in vivo mouse subcutaneous implantation experiment. These findings suggest that the retrograde filling material composed of bioactive glass and the novel bioactive glass based powder exhibits favorable physicochemical properties, cytocompatibility, and biocompatibility.

Characterization of a novel enamel sealer for bioactive remineralization of white spot lesions

OBJECTIVES

45S5 Bioglass is a bioactive glass capable of releasing ions that can interact with dental hard tissues. The current study aimed at examining the effectiveness of 45S5 Bioglass in remineralizing enamel white spot lesion (WSL) as well as its effect on the bond strength of orthodontic brackets bonded to demineralized enamel.

MATERIALS AND METHODS

WSLs were induced in the buccal surfaces of 135 human extracted teeth by storage in acid solution pH 4.5 for four days. The specimens were then equally divided into three groups; Demineralized group, Bioglass group (BG), and control group (intact enamel). The groups were chemically analyzed using (FTIR/ATR) Fourier-transform infrared spectroscopy/attenuated total reflectance, (XRD) X-ray diffraction, and (SEM/EDS) scanning electron microscope equipped with electron-dispersive-spectroscopy. Moreover, 10 specimens from each group were tested using Transverse Micro Radiography (TMR) technique, and 15 specimens from each group were bonded with metal orthodontic brackets and tested for shear bond strength test (SBS). The data were analyzed statistically using One way ANOVA p < 0.05.

RESULTS

TMR study showed that bioglass group samples recorded lesion depth of 70.19 ± 29.21 μm and Δ Z (mineral loss) 732.15 ± 210.16 vol% μm which was significantly lower than the demineralized specimens having lesion depth of 115.75 ± 19.98 μm and Δ Z (mineral loss) 3472.69 ± 738.38 vol%μm, moreover, bioglass specimens recorded 14.15 ± 2.35 Mpa which was significantly higher than demineralized specimens 6.82+1.83 Mpa but less than the control specimens 20.5 + 6.1 MPa (p < 0.05). FTIR/ATR, XRD, and SEM/EDS tests showed that bioglass paste formed a layer of brushite crystals onto the treated enamel surface.

CONCLUSION

45S5 bioglass paste may serve as an effective remineralizing agent for demineralized enamel.

The Efficiency of Fluoride Bioactive Glasses in Protecting Enamel Surrounding Orthodontic Bracket

Objectives

The aim of this study was to evaluate the protective effect of using four different fluoride bioactive enamel sealers against an acidic erosion challenge.

Materials and Methods

A sample of 50 freshly extracted sound upper premolars had their buccal surface bonded to 50 orthodontic brackets using Transbond PLUS color change adhesive; the first four groups had four compositions of fluoride bioactive glasses based on 37 mol% SiO₂, 43.9-53.9 mol% CaO, 6.1 mol% P₂O₅ and CaF₂, and 0-10 mol% of Na₂O applied to their surfaces and the fifth group served as control (which was not treated by any bioactive sealer). All specimens were challenged by 1% citric acid for 18 minutes which was stirred by a magnetic stirrer. The enamel surfaces next to the orthodontic brackets were examined by SEM. The Wilcoxon signed-rank test was used to compare the area covered by the fluoride bioactive pastes before/after erosion (p < 0.05). Samples from the layer formed on top of the examined teeth were tested before/after erosion to be examined by the attenuated total reflectance Fourier-transform infrared spectroscopy (FTIR/ATR).

Results

The FTIR/ATR test showed that fluoride bioactive pastes' applications resulted in the formation of a hydroxyapatite-rich layer; the SEM analysis showed that the aforementioned layer significantly resisted erosion challenge when compared to the control group (p < 0.05).

Conclusions

Fluoride bioactive pastes can efficiently protect the enamel surfaces next to orthodontic brackets from acidic erosion challenges.

Silica-Based Bioactive Glasses and Their Applications in Hard Tissue Regeneration: A Review

Regenerative medicine is a field that aims to influence and improvise the processes of tissue repair and restoration and to assist the body to heal and recover. In the field of hard tissue regeneration, bio-inert materials are being predominantly used, and there is a necessity to use bioactive materials that can help in better tissue-implant interactions and facilitate the healing and regeneration process. One such bioactive material that is being focused upon and studied extensively in the past few decades is bioactive glass (BG). The original bioactive glass (45S5) is composed of silicon dioxide, sodium dioxide, calcium oxide, and phosphorus pentoxide and is mainly referred to by its commercial name Bioglass. BG is mainly used for bone tissue regeneration due to its osteoconductivity and osteostimulation properties. The bioactivity of BG, however, is highly dependent on the compositional ratio of certain glass-forming system content. The manipulation of content ratio and the element compositional flexibility of BG-forming network developed other types of bioactive glasses with controllable chemical durability and chemical affinity with bone and bioactivity. This review article mainly discusses the basic information about silica-based bioactive glasses, including their composition, processing, and properties, as well as their medical applications such as in bone regeneration, as bone grafts, and as dental implant coatings.

Antibacterial silver-containing mesoporous bioglass as a dentin remineralization agent in a microorganism-challenged environment

OBJECTIVES

To provide a suitable material capable of treating dentin hypersensitivity with simultaneous active antibacterial activity.

METHODS

We developed silver-containing mesoporous bioglass (MBG-Ag) using the sol-gel technique, which loaded silver nanoparticles as promising bacteriostatic agents. The MBG-Ag with a powder-to-liquid ratio of 0.5 g: 0.01 mL were uniformly mixed with 20 %, 30 %, and 40 % phosphoric acid for 5, 10 and 20 min, respectively. Furthermore, we evaluated the occlusion efficiency, depth of penetration, and antibacterial activity of dentin specimens by simulating a Streptococcus mutans (S. mutans) infection on dentin. Scanning electron microscopy (SEM), X-ray diffraction (XRD), and Fourier transform infrared spectroscopy (FTIR) were used to characterize the powders and assess tubule occlusion. The minimum inhibitory concentration (MIC) and minimum bactericidal concentration (MBC) of the MBG-Ag against S. mutans were determined via time-killing curves and colony formation assays.

RESULTS

The MIC ranged from 2.5 to 5 mg/mL, and the MBC ranged from 5 to 10 mg/mL. The highest dentinal tubule occlusion efficiency was over 90 %. The colony formation assay confirmed that 5 mg/mL MBG-Ag mixed with phosphoric acid reached the bactericidal concentration.

CONCLUSION

The MBG-Ag 40PA achieved a good occlusion efficiency and deep apatite precipitation in a short time, implying its superiority in clinical applications.

CLINICAL RELEVANCE

The MBG-Ag formed in this study is a promising candidate for the treatment of demineralized dentin and confers antibacterial effects on the remineralized dentin surface against S. mutans.

Fluoride bioactive glass paste improves bond durability and remineralizes tooth structure prior to adhesive restoration

OBJECTIVE

The current study aimed at examining a fluoride containing bioactive glass (BiominF®) paste as a temporary filling material capable of remineralizing the demineralized enamel or dentin, and its ability to decrease a simulated dentinal fluids pressure on the resin/dentin interface, without affecting the shear bond strength of a universal bonding agent to enamel and dentin.

METHODS

60 premolars were utilized for the acid resistance, trans-microradiography (TMR) and shear bond strength (SBS) experiments. Enamel and dentin discs were demineralized for 4 days to create a subsurface demineralized zone followed by applying BiominF® paste, 1.23% acidulated phosphate fluoride, or a temporary filling material for 24 h. 30 extracted human non-carious third molars were utilized for the pulpal pressure experiment in which direct communication to the pulp chamber was created by cutting at a level approximately 1 mm below the cemento-enamel junction while the coronal enamel was ground to expose mid coronal dentin. The dentin surface was exposed to a simulated pulpal pressure. The dentin surfaces had BiominF® paste, an oxalate desensitizing agent, or temporary filling material followed by application of a universal adhesive system.

RESULTS

One way ANOVA showed that BiominF® paste remineralized effectively the demineralized enamel or dentin, did not affect the bond strength of the enamel and dentin surfaces to the tested adhesive system p < 0.05, and improved the acid resistance of the demineralized enamel and dentin against a secondary erosive challenge. Moreover, BiominF® paste decreased the nanoleakage expression in the dentin/adhesive interface exposed to a simulated pulpal pressure.

SIGNIFICANCE

BiominF® paste may serve as a temporary filling material that may improve the longevity of adhesive restorations and help to conserve tooth structures by preserving the demineralized enamel and dentin form cutting during cavity preparation.

Bioactivity assessment of bioactive glasses for dental applications: A critical review

OBJECTIVE

In the context of minimally invasive dentistry and tissue conservation, bioactive products are valuable. The aim of this review was to identify, clarify, and classify the methodologies used to quantify the bioactive glasses bioactivity.

METHODS

Specific search strategies were performed in electronic databases: PubMed, Embase, Cochrane Library, and Scopus. Papers were selected after a review of their title, abstract, and full text. The following data were then examined for final selection: BAG investigated, objectives, criteria, methods, and outcomes.

RESULTS

Sixty-one studies published from 2001 to 2019, were included. The bioactivity of BAG can be evaluated in vitro in contact with solutions, enamel, dentin, or cells. Other studies have conducted in vivo evaluation by BAG contact with dentin and dental pulp. Studies have used various analysis techniques: evaluation of apatite with or without characterization or assessment of mechanical properties. Reprecipitation mechanisms and pulp cell stimulation are treated together through the term 'bioactivity'.

SIGNIFICANCE

Based on these results, we suggested a classification of methodologies for a better understanding of the bioactive properties of BAG. According to all in vitro studies, BAG appear to be bioactive materials. No consensus has been reached on the results of in vivo studies, and no comparison has been conducted between protocols to assess the bioactivity of other bioactive competitor products.

The Effect of the Bioactive Glass and the Er:YAG Laser on the Remineralization of the Affected Dentin: A Comparative In Vitro Study

Introduction: The purpose of this study was to compare the effect of the bioactive glass, the glass ionomer, and the Erbium YAG laser as liners on the remineralization of the affected dentin. Methods: The present study was conducted on 64 healthy extracted human molars divided into 4 groups, 1 control group and 3 experimental groups. After artificially inducing dentinal caries lesions, each of the experimental groups was applied to the cavity floor and then restored with a composite. The samples were stored after thermocycling in an incubator for two months. Finally, the hardness of the cavity floor was measured at 3 depths of 20, 50 and 100 μm by the Vickers microhardness tester. The dentin conditions underneath the liners were also evaluated with FESEM. Statistical analysis was performed by two-way ANOVA and the post-hoc Games-Howell test (P<0.05). Results: Among the groups, the lowest microhardness value was in the control group (P<0.05) except at a depth of 100 μm; therefore, there was no significant difference between the control group and the bioactive glass (P>0.05). The laser group had the highest microhardness value, which was significantly different from the control group (P<0.05). There was a significant difference between the laser and bioactive glass (P<0.05), except at a depth of 20 μm. The laser and glass ionomer had only a significant difference at a depth of 100 μm (P<0.05). The microhardness value induced by glass ionomer was higher than bioactive glass, which in no depth was significant (P>0.05). Partial dentinal tubule occlusion was observed with FESEM in each of the experimental groups as compared to the control group. Conclusion: The microhardness values were higher in all groups than in the control group. The laser might be more successful in remineralization than the other ones.

Remineralising effect of 45S5 bioactive glass on artificial caries in dentine

BACKGROUND

This study investigated the remineralisation effect of bioactive glass on artificial dentine caries.

METHODS

Dentine disks with artificial caries were treated with bioactive glass (group BAG), casein phosphopeptide-amorphous calcium phosphate (CPP-ACP) (group CPP-ACP), sodium fluoride glycerol (group F) or deionized water (group W). All disks were subjected to pH cycling for 28 days subsequently. The topography, microhardness and remineralisation depth of the dentine carious lesion were assessed by atomic force microscopy (AFM), microhardness testing and confocal laser scanning microscope (CLSM), respectively.

RESULTS

AFM images indicated mineral depositions on the surface of the carious lesion in group BAG. The changes of Vickers hardness number (ΔVHN, mean ± SD) after pH cycling were 9.67 ± 3.60, 6.06 ± 3.83, 5.00 ± 2.19 and - 1.90 ± 2.09 (p < 0.001) in group BAG, group CPP-ACP, group F and group W, respectively. The remineralisation depth (mean ± SD) of the carious lesion in group BAG, group CPP-ACP, group F and group W were 165 ± 11 μm, 111 ± 11 μm, 75 ± 6 μm and 0 μm (p < 0.001), respectively.

CONCLUSION

Bioactive glass possessed a promising remineralisation effect on artificial dentine caries and could be a therapeutic choice for caries management.

Dentin tubule obturation of a bioglass-based dentin desensitizer under repeated exposure to lactid acid and brushing

Background

Dentin hypersensitivity is a frequent finding especially in periodontitis patients. Conventional treatment aims for obstruction of dentin tubules by disabling liquid and osmotic fluctuation to and from the pulpal chamber. A novel bioglass-based desensitizer was shown to obstruct tubules and to resist periodic exposure to lactic acid. Whether this obstruction is resistant to brushing had not been tested so far. Accordingly, the present study aimed to assess dentin tubule obstruction after repeated acid exposure and brushing.

Methods

Sixty dentin discs were cleaned with 17% EDTA, mounted into a pulp fluid simulator and randomly divided into 3 groups: No surface treatment in Group A, Seal&Protect® in group B and DentinoCer in group C. Discs were exposed to 0.1 M non-saturated lactic acid thrice and standardized brushing twice a day for 12 days. At baseline and after 2, 4 and 12 d samples were removed from the setting and prepared for top-view SEM analysis to assess tubule obstruction using the Olley score. Discs were then vertically cut and the section surface morphologically assessed using backscatter imaging. For both vertical and sectional surfaces EDX analysis was used to characterize the surface composition in the tubular and inter-tubular area.

Results

Group A showed clean tubular lumina at all time points. From day 2 onwards dentin showed exposed collagen fibers. Group 2 initially showed a complete surface coverage that flattened out during treatment without ever exposing tubules. At baseline, samples of Group C displayed a complete homogeneous coverage. From day 2 on tubules entrances with obstructed lumen became visible. While on day 4 and 12 the dentin surface exposed collagen fibers the lumina remained closed. EDX analysis of the vertical and horizontal views showed that P and Ca were predominant elements in both the inter- and tubular dentin while Si peaks were found in the tubule plugs.

Conclusion

While group B displayed a packed layer on the surface during the whole investigation time group C samples lost their superficial layer within 48 h. Tubule plugs containing considerable Si proportions indicated previous presence of DentinoCer, while high Ca and P proportions suggest obturation by dentin-like material.

The efficacy of a bioglass (45S5) paste temporary filling used to remineralize enamel surfaces prior to bonding procedures

OBJECTIVES

The efficacy of using a 45S5 Bioglass paste as a remineralizing temporary filling material was compared to fluoride gel (1.23% acidulated-phosphate-fluoride, Gelato Gel, NJ, USA) applied for 24 h and for 4 min and to a temporary filling material (Caviton; GC, Tokyo, Japan).

METHODS

66 extracted human premolars were used. All specimens were sectioned mesio-distally. All specimens were challenged by a demineralization solution (pH4.5) for 4 days. The specimens were divided into 4 groups: (Bioglass), (Fluoride 4-minutes), (Fluoride 24-Hours), and (Temp) (n = 33). 10 specimens were examined by TMR (Transversal Microradiography)to test remineralization capacity of each agent. 8 specimens were assigned to determine the acid resistance of a bonded resin-enamel interface after the various treatment methods. 15 samples were assigned to determine the effect of each agent on the shear bond strength of a single bottle self-etch adhesive system. One way ANOVA was used to compare the obtained results (p < 0.05).

RESULTS

Specimens treated with 45S5 bioglass showed statistically significant reductions in (delta z) values when compared to the other three groups (p < 0.05). Treatment of demineralized enamel by fluoride prior to bonding significantly decreased shear bond strength values, however 45S5 bioglass treatment did not affect the shear bond strength of adhesive system to enamel (p < 0.05). The acid-resistance of the interface between resin-enamel was significantly improved when fluoride or bioglass were applied onto the enamel surface prior to demineralization.

CONCLUSIONS

45S5 bioglass paste has high potential to be used as a remineralizing temporary filling material.

Novel calcium encapsulated mesocellular siliceous foams for crystal growth in dentinal tubules

OBJECTIVES

The aim of this study was to investigate the novel mesocellular siliceous foams (MCF) containing CaCO₃ nanoparticles (denoted as CMCF) combined with phosphoric acid could occlude dentinal tubules through the formation of biomimetic crystal barrier.

METHODS

Ultrastructures of MCF and CMCF were examined by transmission electron microscopy (TEM). Elemental components were analyzed with energy dispersive X-ray spectrometry (EDX). CMCF was mixed with distilled water, 10%, 20% and 30% phosphoric acid then applied on dentine discs. Crystals were characterized by X-ray powder diffractometry (XRD). The sealing efficacy of the dentinal tubules was examined by scanning electron microscopy.

RESULTS

TEM images showed MCF presented a pore size of approximately 30.0 nm and CMCF contained abundant nano-CaCO₃. Sealing efficacy showed that CMCF, when reacted with 30% phosphoric acid, would form crystals in the dentinal tubules to a depth of 83.2 ± 17.6 μm at an occlusion percentage of 75.6 ± 12.8% on average; both occlusion percentage and depth were higher than those obtained with 10% or 20% phosphoric acid (p < 0.05). The results of XRD and EDS indicated that the crystal growth in the dentinal tubules could be transformed into the biomimetic crystals.

CONCLUSION

This study showed that the CMCF with 30% phosphoric acid could effectively occlude the dentinal tubules through the formation of biomimetic crystal barrier.

CLINICAL SIGNIFICANCE

The novel CMCF combined with phosphoric acid may have potential for the treatment of dentine hypersensitivity.

45S5 Bioglass paste is capable of protecting the enamel surrounding orthodontic brackets against erosive challenge

OBJECTIVES:

This study aimed at evaluating the effect of using a 45S5 bioglass paste and a topical fluoride as protective agents against acidic erosion (resembling acidic beverage softdrinks intake) for enamel surrounding orthodontic brackets.

MATERIALS AND METHODS:

Sample of 21 freshly extracted sound incisor and premolar teeth was randomly divided into three equal groups: a bioglass group (Bioglass) (NovaMin, 5-mm average particle, NovaMin Technology), a Fluoride group (Fluoride) (Gelato APF Gel, Keystone Industries), and a control group (Control). Orthodontic brackets were bonded to the utilized teeth usingMIP (Moisture Insensitive Primer) and Transbond PLUS color change adhesive. All specimens were challenged by 1% citric acid for 18 min. The top enamel surfaces next to the orthodontic brackets were examined by SEM-EDS. Wilcoxon Signed-Rank test was used to compare the area covered by the 45S5 bioglass paste before/after erosion P < 0.05.

RESULTS:

45S5 bioglass paste application resulted in the formation of an interaction layer that significantly resisted erosion challenge P < 0.05. The fluoride and control specimens showed signs of erosion of the enamel next to the orthodontic brackets (P < 0.05).

CONCLUSION:

45S5 bioglass paste can efficiently protect the enamel surfaces next to orthodontic brackets for acidic erosion challenges.

A Novel Fluoride Containing Bioactive Glass Paste is Capable of Re-Mineralizing Early Caries Lesions

White-spot-lesions (WSL) are a common complication associated with orthodontic treatment. In the current study, the remineralization efficacy of a BiominF^® paste was compared to the efficacy of a fluoride gel. Methods: Orthodontic brackets were bonded to 60 human premolars buccal surfaces, which were covered with varnish, except a small treatment area (3 mm²). All specimens were challenged by a demineralization solution for 4 days. Specimens were assigned into 4 groups: BiominF^® paste, Fluoride (4-min application), fluoride (twenty four hours application), and the control (n = 15). After cross-sectioning, enamel slabs having a thickness of approximately 100–120 μm were obtained. A TMR (Transverse Micro Radiography) technique was used to observe the sub-surface enamel lesions’ depth and mineral density, and their response to the remineralization protocols. One way ANOVA was used to analyze the results (α = 0.05). The top and the cross-sectional surfaces were observed using SEM/EDS. Results: Specimens treated with BiominF^® paste showed significant decrease in delta z values, however lesion depth showed no significant difference when compared to the other three groups (p < 0.05). SEM/EDS observation showed the formation of crystal like structures on top of enamel demineralized surfaces, when treated with BiominF^® paste. In conclusion BiominF^® paste can be considered an effective remineralizing agent for white spot Lesions.

Increasing the efficiency of CPP-ACP to remineralize enamel white spot lesions

OBJECTIVES

To compare the remineralization efficacy of using the MI paste plus according to manufacturer's instructions to MI varnish and to using a modified method of MI-paste plus application.

MATERIALS AND METHODS

100 enamel specimens were obtained from the buccal and lingual surfaces of 50 extracted human non-caries third molars. All specimens were challenged by a buffered demineralization solution for 4 days, and were divided in 4 groups with 25 specimens in each group. 25 demineralized specimens had MI paste plus applied for 4 min and then wiped out (MI), 25 specimens had MI paste applied followed by application of SE-bonding agent (MI + Bond), 25 specimens had MI Varnish applied according to manufacturer instructions (MI Varnish) the rest of specimens served as controls (C). All specimens were stored for 7 days in artificial saliva. All specimens had their surface hardness (SH) measured by micro-hardness tester before/after the acidic challenge and after the treatment procedures. After the SH test all specimens were crosssectioned to obtain 100-150 micron thickness specimens to observe the lesion depth before/after treatment by the TMR (Transverse Micro Radiography) technique.

RESULTS

TMR experiment showed that (MI + Bond) and (MI varnish) groups recorded significant decrease in lesion depth and mineral loss of the tested subsurface lesion p < 0.05. (MI + Bond) group scored the highest significant regain of surface micro hardness results p < 0.05.

CONCLUSION

(MI varnish) and the modified application of MI paste are methods that can increase the efficacy of CPP-ACP in remineralizing the enamel surface lesions.

Novel evaluation and treatment techniques for white spot lesions. An in vitro study

OBJECTIVE

White spot lesions (WSLs) are commonly seen during and after orthodontic treatment. Therefore, the objective of this in vitro study was to assess the effect of 45S5-bioglass in remineralizing WSLs using cross-polarization optical coherence tomography (CP-OCT) and confirm the findings by micro-hardness test.

METHODS

Ceramic orthodontic brackets were bonded to the buccal surface of 45 human premolars with Transbond XT primer followed by Transbond PLUS according to the manufacturer's instructions. Then, all specimens were varnished excluding the area of interest (AOI) around the bonded brackets, immersed in demineralizing solution and divided into three groups: BG, REM and CONT. In BG group, 15 specimens were treated with bioglass paste for 24 hours. REM group had 15 specimens stored in remineralization solution for 24 hours. CONT group had the remaining 15 specimens with no treatment. All specimens were examined under CP-OCT and tested using cross-sectional micro-hardness techniques.

RESULTS

CP-OCT analysis showed that the maximum pixel value after bioglass application was significantly increased at AOI when compared to CONT and REM groups (P>.05), which was confirmed by the cross-sectional micro-hardness results (P>.05).

CONCLUSION

Early enamel demineralization and remineralization can be easily and non-invasively monitored with CP-OCT. Bioglass is a potent remineralizing agent.

The effect of a bioglass paste on enamel exposed to erosive challenge

OBJECTIVES

The current study is evaluating the effect of using a 45S5 bioglass paste and topical fluoride application on the cross sectional micro-hardness and the chemical surface changes of eroded enamel.

METHODS

Enamel discs were obtained from the buccal surface of one hundred extracted human non-carious third molars. The enamel surfaces were ground flat and each disc was coated with two layers of acid resistant nail varnish except for an exposed treatment window (3mm×2mm) on the buccal surface of the tooth. All specimens were challenged for 60 min by orange juice (Tropicana, Chicago, USA) pH 3.85+0.5. The specimens were divided into four groups: the 45S5 bioglass paste group, fluoride gel group (5 min application), fluoride gel group (24h application) while the rest of specimens served as control. The cross-sectional micro-hardness of 20 specimens from each group was measured. Five specimens from each group had their top eroded enamel surfaces examined by SEM-EDS. One-way ANOVA was used to compare the cross-sectional micro-hardness of the three groups p<0.05.

RESULTS

45S5 bioglass paste application significantly improved the sub-surface eroded enamel when compared to fluoride and control specimens (p<0.05).

CONCLUSION

45S5 bioglass paste can efficiently improve the micro-hardness of the sub-surface eroded enamel surface.

CLINICAL SIGNIFICANCE

The use of the 45S5 Bioglass paste can be used efficiently as a potent remineralizing agent for the sub-surface enamel lesions resulting from erosive challenges.

The Efficacy of Selected Desensitizing OTC Products: A Systematic Review

Objectives. The aim of the present study was to review the published literature in order to identify relevant studies for inclusion and to determine whether there was any evidence on the clinical effectiveness of selected desensitizing toothpastes, calcium sodium phosphosilicate (CSPS), amorphous calcium phosphate (ACP), nanohydroxyapatite, and casein phosphopeptide-amorphous calcium phosphate (tooth mousse) on reducing dentine hypersensitivity (DH). Materials and Methods. Following a review of 593 papers identified from searching both electronic databases (PUBMED) and hand searching of relevant written journals, only 5 papers were accepted for inclusion. Results. Analysis of the included studies (3 CSPS and 2 ACP) would suggest that there may be some benefit for patients using these products for reducing DH. No direct comparative studies were available to assess all these products under the same conditions neither were there any comparative randomised controlled studies that compared at least two of these products in determining their effectiveness in treating DH. Conclusions. Due to the small number of included studies, there are limited clinical data to support any claims of clinical efficacy of these OTC products. Further studies are therefore required to determine the efficacy of these products in well-controlled RCT studies with a larger sample size.

Evaluation of new treatment for incipient enamel demineralization using 45S5 bioglass

Bioglass 45S5 is a silica-based bioactive glass capable of depositing a layer of hydroxyl carbonate apatite on the surface of the glass when immersed in body fluids. The present paper studies a new technique for treating early human dental enamel caries lesions by using a paste composed of 45S5 bioglass and phosphoric acid. Artificial caries lesions were induced in enamel flat surfaces by means of a decalcification solution. All specimens were exposed to a brushing-abrasion challenge to test the durability of any newly formed layer resulting from the application of 45S5 bioglass paste. The specimens treated with bioglass paste showed complete coverage with a layer of brushite crystals. The brushing-abrasion challenge did not statistically affect the percentage of enamel coverage with the crystalline layer formed by the application of bioglass (p<0.05). These crystals were converted to hydroxyapatite crystals when stored in artificial saliva for 14 days. The current technique suggests the possibility of restoring incipient enamel erosive lesion with an abrasion durable layer of hydroxyapatite crystals.