HEMA release and degree of conversion from a resin-modified glass ionomer cement after various delays of light activation

Enhancing subgingival margin restoration: a comprehensive review and meta-analysis of deep margin elevation's impact on microleakage

INTRODUCTION

Restorative dentistry faces complex challenges with deep proximal surface destruction, requiring novel approaches like DME (Deep Margin Elevation). In order to achieve the best results while treating severe tooth damage, this study examines the advantages, disadvantages, and possible collaborations of different treatments.

AIMS

This systematic review investigates the efficacy of DME as an adjunctive procedure in restorative dentistry, specifically focusing on its impact on microleakage.

METHODS

The study adheres to PRISMA guidelines and employs the PICOS framework for eligibility criteria. 394 potentially qualifying studies were discovered and thorough literature search was carried out via databases. After applying inclusion criteria, 7 studies were included in the analysis. Articles were selected based on criteria that included indirect restoration and performing DME and were compared with indirect restorations without DME. Composite resin was used for DME. Other materials for DME performing, including GI and composite flow, were systematically reviewed. Data analysis was done by biostat software (α = 0.05).

RESULTS

The meta-analysis of selected studies reveals a statistically significant positive effect of DME on reduction of microleakage (p = 0.001).

CONCLUSION

The results of this study underscore the potential of DME in addressing subgingival margin challenges and provide valuable insights for restorative dentistry practices.

Shear bond strength of a RMGIC for orthodontic bracket bonding to enamel

OBJECTIVE

To evaluate the shear bond strength (SBS) of a restorative resin-modified glass ionomer cement (RMGIC) for orthodontic bracket bonding.

MATERIALS AND METHODS

One hundred twenty-one human teeth were randomly divided into 11 groups (n = 11) according to the surface treatment applied (H3PO4 ± Transbond Plus (TSEP) or Scotchbond Universal (SU)), and the adhesive used (Riva LC HV (RIVA), Fuji Ortho (FUJI), and Transbond XT (TXT)). For each sample, a metal button was bonded. SBS tests were performed at 1 week and debonded specimens were observed for failure modes determination. One-way ANOVA followed by Tukey's post hoc test was used to compare SBS differences and Fisher's exact test to analyze the failure modes (p < 0.05).

RESULTS

TSEP + FUJI and H3PO4 + SU + TXT showed the highest SBS values while H3PO4 + TSEP + RIVA showed the lowest value. Cohesive failure and mixed failure were found in the groups with SU and TXT and adhesive failure in the other groups.

DISCUSSION/CONCLUSIONS

The bonding of orthodontic attachments to enamel could be performed with any of the three materials studied. The use of a universal adhesive in the bonding protocol could optimize the adhesion values. Clinical studies would be needed to confirm the results obtained.

Polybetaine-enhanced hybrid ionomer cement shows improved total biological effect with bacterial resistance and cellular stimulation

Hybrid ionomer cements (HICs) are aesthetic polyelectrolyte cements that have been modified with a resin. The setting of HICs occurs by both monomer polymerization and an acid-base reaction. In addition, HICs contain a resin, which is substituted for water. Thus, the competition between the setting reactions and reduced water content inherently limits polysalt formation and, consequently the bioactive interactions. In this study, we explored the effects of polybetaine zwitterionic derivatives (mZMs) on the augmentation of the bioactive response of HICs. The polybetaines were homogenized into an HIC in different proportions (α, β, and γ) at 3% w/v. Following basic characterization, the bioactive response of human dental pulp stem cells (hDPSCs) was evaluated. The augmented release of the principal constituent ions (strontium, silica, and fluoride) from the HIC was observed with the addition of the mZMs. Modification with α-mZM elicited the most favorable bioactive response, namely, increased ion elution, in vitro calcium phosphate precipitation, and excellent biofouling resistance, which deterred the growth of the bridging species of Veillonella. Moreover, α-mZM resulted in a significant increase in the hDPSC response, as confirmed by a significant increase (p < 0.05) in alizarin red staining. The results of mRNA expression tests, performed using periodically refreshed media, showed increased and early peak expression levels for RUNX2, OCN, and OPN in the case of α-mZM. Based on the results of the in vitro experiments, it can be concluded that modification of HICs with polybetaine α-mZM can augment the overall biological response.

Meta-analytical analysis on components released from resin-based dental materials

OBJECTIVES

Resin-based materials are applied in every branch of dentistry. Due to their tendency to release substances in the oral environment, doubts have been raised about their actual safety. This review aims to provide a comprehensive analysis of the last decade literature regarding the concentrations of elutable substances released from dental resin-based materials in different type of solvents.

MATERIALS AND METHODS

All the literature published on dental journals between January 2010 and April 2022 was searched using international databases (PubMed, Scopus, Web of Science). Due to strict inclusion criteria, only 23 papers out of 877 were considered eligible. The concentration of eluted substances related to surface and volume of the sample was analyzed, considering data at 24 h as a reference. The total cumulative release was examined as well.

RESULTS

The most eluted substances were HEMA, TEGDMA, and BPA, while the less eluted were Bis-GMA and UDMA. Organic solvents caused significantly higher release of substances than water-based ones. A statistically significant inverse correlation between the release of molecules and their molecular mass was observed. A statistically significant positive correlation between the amount of released molecule and the specimen surface area was detected, as well as a weak positive correlation between the release and the specimen volume.

CONCLUSIONS

Type of solvent, molecular mass of eluates, and specimen surface and volume affect substances release from materials.

CLINICAL RELEVANCE

It could be advisable to rely on materials based on monomers with a reduced elution tendency for clinical procedures.

Impact of adhesive primer and light-curing on polymerization kinetics of self-adhesive resin cement in association with free radical reaction

This study analyzed the impact of adhesive primer and light-curing on the polymerization kinetics of urethane dimethacrylate-based self-adhesive resin cement combined with free radical reaction. Specimens were prepared by mixing the cement paste with or without adhesive primer. Subsequently, specimens were light-cured or set without light-curing. The degree of conversion (DC), Vickers hardness (Hv), and free radical concentrations were repeatedly measured up to 168 h after the curing initiation. Irrespective of the curing procedures, DC, Hv, and free radical concentration rapidly increased during the initial 30 min of curing. The specimens cured with adhesive primer and/or light-curing generally showed higher values of DC, Hv, and radical concentration than those set by chemical curing alone, especially during the initial polymerization phase. Kinetic analysis using a linear mixed model revealed that the adhesive primer had a higher coefficient estimate than light-curing, indicating that the former had a higher impact on the polymerization. Additionally, the adhesive primer alleviated the Hv reduction caused by water and air during the initial polymerization phase, although light-curing hardly prevented the polymerization inhibition. Therefore, we suggest that application of adhesive primer is beneficial to achieve higher degree of conversion and better mechanical properties of self-adhesive resin cements by enhancing free radical reactions.

Effect of Deep Margin Elevation on Interfacial Gap Development of CAD/CAM Inlays after Thermomechanical Cycling

METHODS AND MATERIALS

Mesio-occlusal-distal cavities were prepared on 12 extracted mandibular molars. The gingival margin of one proximal box was elevated with resin modified glass ionomer (RMGI) by a height of 2 mm (Group E [elevation]), and the margin of the other side served as a control (Group NE [no elevation]). Lithium disilicate computer-aided design and computer-aided manufacturing (CAD/CAM) inlays were fabricated and bonded with a self-adhesive resin cement. An aging process was simulated on the specimens under thermomechanical cycling by using a chewing simulator. Marginal integration was evaluated under scanning electron miscroscopy (SEM) using epoxy resin replicas before and after cycling. Marginal areas were stained with silver nitrate solution, and the volumetric gap was measured at the bonded interfaces using micro-computed tomography (CT) before and after cycling. Statistical analyses were performed using paired t-tests, the Wilcoxon signed rank test, and the Mann-Whitney test (a<0.05).

RESULTS

SEM showed marginal discontinuities in Group NE that increased after thermomechanical cycling. Micro-computed tomography exhibited three-dimensional dye-penetrating patterns at the interfaces before and after cycling. Interfacial disintegration was larger in Group NE before cycling (p<0.05). Thermomechanical cycling increased the gaps in both Groups NE and E (p<0.05). The gap increment from thermomechanical cycling was larger in Group NE (p<0.05).

CONCLUSIONS

Thermomechanical cycling induced interfacial disintegration at the lithium disilicate CAD/CAM inlays, with deep proximal margins. Margin elevation with RMGI placement reduced the extent of the interfacial gap formation before and after the aging simulation.

Evaluation of a newly developed calcium fluoride nanoparticles-containing orthodontic primer: An in-vitro study

OBJECTIVES

Fluoride and calcium ions have the ability to reduce the formation of white spot lesions (WSL) in enamel. This study aimed to develop a novel orthodontic primer that incorporates calcium fluoride nanoparticles (nCaF₂) and investigate its cytotoxic and physical properties as this primer could enhance the remineralization process when used with the conventional acid etching technique.

MATERIALS AND METHODS

Three groups of the newly introduced primers were prepared by adding and mixing nCaF2 (Nanoshell Company, USA at 5%, 10%, 20% in weight) to Transbond™ XT orthodontic primers (3M-Unitek, Monrovia, USA). X-Ray Diffraction (XRD) was performed to verify and evaluate the phase of the nanopowders. Field Emission Scanning Electron Microscope (FESEM) observation was used to assess the homogeneity of tested primers, and Energy Dispersive X-Ray Spectroscopy (EDS) was performed to analyze elements of the prepared samples. The three primer groups were compared to the control primer (without the addition of nCaF2) in terms of cytotoxic behavior, homogeneity, agglomeration, shear bond strength (SBS), and adhesive remnant index (ARI).

RESULTS

nCaF₂ primers with all the prepared concentrations revealed good homogeneity with no apparent agglomeration after four months of mixing. Cytotoxicity of the new primers was higher than that of the control primer, but it was within the accepted limits of the ISO standards (70% cell viability). While the SBS and ARI values were comparable with the control primer (p > 0.05).

CONCLUSIONS

The newly developed orthodontic primers with different concentrations of nCaF₂ (5%, 10%, and 20%) showed a homogenous distribution of nCaF₂ within the primers with no apparent agglomeration, acceptable cytotoxic level, adequate SBS, and ARI. Future clinical testing of nCaF₂-containing orthodontic primer as a preventive measure for WSLs during fixed orthodontic treatment is suggested.

Monomer conversion, dimensional stability, biaxial flexural strength, and fluoride release of resin-based restorative material containing alkaline fillers

The aim of this study was to assess monomer conversion, dimensional stability (mass and volume changes), biaxial flexural strength (BFS), and fluoride release of recently developed resin composites containing alkaline fillers (Cention N; CN) compared with resin-modified glass ionomer cements (RMGICs: Riva LC; RL and Fuji II LC; FL), and conventional composite (Z350). FL showed highest monomer conversion (88±2%) followed by RL (73±10%), CN (59±2%), and Z350 (50±2%). RL exhibited highest mass and volume increase (10.22±0.04 wt% and 19.4±0.2 vol%). CN exhibited higher BFS (180±20 MPa) than RMGICs but lower than Z350 (248±27 MPa). The highest cumulative fluoride release at 6 weeks was observed with RL (136±22 ppm) followed by CN (36±4 ppm) and FL (30±3 ppm). CN exhibited monomer conversion higher than the composite. CN also released fluoride in the range of that observed with RMGICs but with higher flexural strength.

Can Dental Cement Composition Affect Dental Implant Success?

Cement-retained restorations on dental implants are a well-established method to replace missing teeth. However, undetected residual cement left during crown cementation procedures encourages microorganism growth, and it has been identified as a risk factor for peri-implant disease. Currently, there is no official guidance for dental cement selection, and the increasing variety of available compositions intensifies the complexity of the clinicians' decision process. The present study aimed to evaluate the in vitro host and bacterial cellular response to four different commercial dental cements as well as their effects on cement surface morphology. Disk specimens (n = 3) of bioceramic, zinc phosphate, resin-modified glass ionomer, and resin cements were exposed to host (murine pre-osteoblasts, human gingival fibroblasts, and undifferentiated human macrophages) and oral bacterial (Streptococcus mutans, Streptococcus salivarius, Streptococcus sanguinis, and Aggregatibacter actinomycetemcomitans) cells. Results indicated that oral bacteria degraded the cement surface, but bacterial viability was not significantly affected by the presence of dental cement. Conversely, the biocompatibility and morphology of host cells were severely impacted by the cement composition. Only the bioceramic cement achieved >70% viability for all cell lines investigated. Within the limitations of this study, the results indicated the importance of considering the biological interactions of a dental cement composition during selection as it played a significant role in the host cellular response and the degree of surface degradation due to bacterial attack.

Efficacy of Direct Restorative Materials in Proximal Box Elevation on the Margin Quality and Fracture Resistance of Molars Restored With CAD/CAM Onlays

PURPOSE

The purpose of this study was to investigate the effect of four direct restorative materials that can be used in the proximal box elevation (PBE) technique.

METHODS AND MATERIALS

Seventy-five molar teeth were randomly assigned to one of five groups (n=15): type II glass ionomer (GI), type II resin-modified glass ionomer (RMGI), resin-based composite (RBC), bulk-fill (BF) resin-based composite, and a control with no box elevation procedure. Specimens were prepared for a standard mesio-occlusal-distal, computer-aided design/computer-aided manufactured (CAD-CAM) resin, nanoceramic onlay with mesial cervical margins located 1 mm above the cementoenamel junction (CEJ) and distal cervical margins located 2 mm below the CEJ. PBE was used to elevate the distal margins to 1 mm above the CEJ in all groups except the control group. For the control group the onlay margin was placed directly on the prepared distal tooth structure without PBE. A Lava Ultimate CAD/CAM resin, nanoceramic onlay restorative was manufactured and bonded on all specimens with RelyX Ultimate adhesive resin cement. The quality of the tooth-PBE material and PBE material-onlay interface was evaluated with scanning electron microscopy using epoxy resin replicas before and after cyclic loading (100,000 cycles, 1.2 Hz at 65N and 37°C). In addition to margin quality, the fracture resistance of each group was measured using a universal testing machine. Fracture pattern was recorded by visual examination. The Levene test for homogeneity and the Welch analysis of variance were completed for fracture resistance and margin quality. A χ² test was completed for break mode.

RESULTS

For dentin margins, a statistically significant difference was detected between the RMGI and control groups at baseline (p=0.0442). All other groups-GI, RBC, and BF-showed no difference from the control at baseline (p>0.05). No statistical significance was observed among groups for post-cyclic fatigue (p=0.8735). For onlay margins, no statistical significance was observed among groups for pre-cyclic fatigue, post-cyclic fatigue, or change (p=0.9713, p=0.528, p=0.4385, respectively). No significant difference was observed for the fracture resistance among groups or for the type of break by material used (p=0.1593, p=0.77, respectively).

CONCLUSION

Within the parameters of this study, after mechanical fatigue, the materials used for PBE: RMGI, RBC, and BF, did not influence results in terms of margin quality and fracture resistance. Therefore, collective findings suggest that these materials might be suitable for PBE procedures. Nevertheless, clinical caution is recommended with any PBE procedure and further testing of GI materials is needed.

Structural and long-term mechanical properties from a resin-modified glass ionomer cement after various delays of light-activation

This study aimed, after various delays of light-activation, to examine the microstructure of a resin-modified glass ionomer cement (RMGIC) by scanning electron microscopy (SEM) and to test its mechanical properties in short and long term. Five groups of Fuji II LC were investigated with different light-curing protocols. For each, SEM observations were undertaken with etched samples to selectively observe the organic polymer phase. Flexural strength and microhardness were also tested after 24 h and 12 months storage. SEM examination showed different images of the material according to the delay of light-activation. At 24 h, there was a delay with maximal mechanical properties: 5 min for flexural strength, 10 min for microhardness. However, at 12 months, maximal mechanical properties were reached for the shortest delay. The competition between the acid-base and polymerization reactions results in the formation of a structurally and mechanically different material according to the delay of light-activation. This delay should be adapted to the clinical situation.

Shear Bond Strength and Remineralisation Effect of a Casein Phosphopeptide-Amorphous Calcium Phosphate-Modified Glass Ionomer Cement on Artificial "Caries-Affected" Dentine

This study investigated the effect of casein phosphopeptide-amorphous calcium phosphate (CPP-ACP)-modified glass ionomer cement (GIC) on shear bond strength (SBS) and remineralisation of artificial “caries-affected” dentine. Human dentine slices were demineralised and allocated to three groups: group 1, conventional GIC; group 2, CPP-ACP-modified GIC; and group 3, resin-modified GIC. The SBS was measured using a universal testing machine (n = 16 per group). Remaining samples (n = 8 per group) were subjected to pH-cycling for 28 days. After pH-cycling, lesion depth and micro-mechanical properties at the sample-bonding interface were investigated using micro-computed tomography (micro-CT) and nano-indentation, respectively. The SBS for groups 1 to 3 were 4.6 ± 1.5 MPa, 4.2 ± 1.1 MPa, and 5.9 ± 1.9 MPa, respectively (p = 0.007; group 1, group 2 < group 3). Lesion depths determined by micro-CT for groups 1 to 3 were 186 ± 8 µm, 149 ± 14 µm, and 178 ± 8 µm, respectively (p < 0.001; group 2 < group 1, group 3). The mean (±SD, standard deviation) nano-hardness values for groups 1 to 3 were 0.85 ± 0.22 GPa, 1.14 ± 0.21 GPa, and 0.81 ± 0.09 GPa, respectively (p = 0.003; group 1, group 3 < group 2). The mean (±SD) elastic moduli for groups 1 to 3 were 1.70 ± 0.33 GPa, 2.35 ± 0.44 GPa, and 1.59 ± 0.13 GPa, respectively (p < 0.001; group 1, group 3 < group 2). The results suggest that the incorporation of CPP-ACP into GIC does not adversely affect the adhesion to artificial caries-affected dentine. Furthermore, CPP-ACP-modified GIC is superior to conventional GIC in promoting dentine remineralisation.