Pre-cementation procedures' effect on dental zirconias with different yttria content

Advances in zirconia-based dental materials: Properties, classification, applications, and future prospects

OBJECTIVES

Zirconia (ZrO2) ceramics are widely used in dental restorations due to their superior mechanical properties, durability, and ever-improving translucency. This review aims to explore the properties, classification, applications, and recent advancements of zirconia-based dental materials, highlighting their potential to revolutionize dental restoration techniques.

STUDY SELECTION, DATA AND SOURCES

The most recent literature available in scientific databases (PubMed and Web of Science) reporting advances of zirconia-based materials within the dental field is thoroughly examined and summarized, covering the major keywords "dental zirconia, classification, aesthetic, LTD, applications, manufacturing, surface treatments".

CONCLUSIONS

An exhaustive overview of the properties, classifications, and applications of dental zirconia was presented, alongside an exploration of future prospects and potential advances. This review highlighted the importance of addressing challenges such as low-temperature degradation resistance and optimizing the balance between mechanical strength and translucency. Also, innovative approaches to improve the performances of zirconia as dental material was discussed.

CLINICAL SIGNIFICANCE

This review provides a better understanding of zirconia-based dental biomaterials for dentists, helping them to make better choice when choosing a specific material to fabricate the restorations or to place the implant. Moreover, new generations of zirconia are still expected to make progress on key issues such as the long-term applications in dental materials while maintaining both damage resistance and aesthetic appeal, defining the directions for future research.

Impact of in vitro findings on clinical protocols for the adhesion of CAD-CAM blocks: A systematic integrative review and meta-analysis

STATEMENT OF PROBLEM

Computer-aided design and computer-aided manufacturing (CAD-CAM) blocks have evolved rapidly, making it difficult to establish the best clinical protocol for bonding a given block and whether an established protocol is appropriate for a newly introduced product.

PURPOSE

This integrative systematic review and meta-analysis aimed to clarify whether the clinician can select the most efficient adhesion protocols for CAD-CAM blocks by reading published in vitro studies and implementing them in daily practice.

MATERIAL AND METHODS

Based on the population, intervention, comparison, and outcome (PICO) strategy, 3 databases were searched for in vitro studies, randomized clinical trials, prospective or retrospective studies, and case reports from January 1, 2015, to July 31, 2021. A meta-analysis analyzed 28 studies to calculate the mean difference between best and worst protocols for each author and block with a random-effects model (α=.05).

RESULTS

From 508 relevant studies, 37 in vitro studies, 2 clinical studies, and 1 clinical report were selected for data extraction and qualitative analysis. Vita Enamic, IPS e.max CAD, LAVA Ultimate, and Vita Mark II blocks were the most studied, and RelyX Ultimate was the most used luting cement. The meta-analysis confirmed the null hypothesis that the evidence-based efficacy of clinical protocols to bond CAD-CAM blocks is still controversial (P<.05).

CONCLUSIONS

There are objective standards for individual in vitro tests, but the studies lack standardization. Some tested protocols were more efficient than others. Randomized clinical trials and well-documented clinical situations were almost nonexistent, making direct application of in vitro findings in clinical practice impossible.

An experimental study of flexural strength and hardness of zirconia and their relation to crown failure loads

STATEMENT OF PROBLEM

Dental zirconia is often marketed and selected for restorative use based upon the biaxial flexural strength of prefabricated specimens (disks) without considering other mechanical and physical properties.

PURPOSE

The purpose of this in vitro study was to test whether 4-point flexural strength, biaxial flexural strength, and/or hardness may correlate with failure loads for crowns made of different zirconia materials.

MATERIAL AND METHODS

Three brands of zirconia (BruxZir, Cercon, and Katana) were used to fabricate anatomically contoured crowns, rectangular bars, and circular disks. The sample size was n=15 specimens per zirconia brand and specimen shape. The bars were tested for 4-point flexural strength by using the 4-point bending (4PB) test and Vickers hardness (VH), while the disks were tested for biaxial flexural strength by using a piston-on-3 ball (POB) test. Crowns were attached to resin abutments and compressed with a steel spherical indenter through a polyethylene sheet to assess the failure loads by using the "crunch the crown" (CTC) test. One-way ANOVA (α=.05) was used to test for statistically significant differences between groups, and Weibull analysis was used to assess the variability of the measured flexural strengths, failure load, and hardness.

RESULTS

Statistical differences (P<.001) were found in comparing Cercon, BruxZir, and Katana ([4260 N=4186 N]>3195 N, respectively) with the CTC test and (396 MPa>[281 MPa=275 MPa], respectively) the 4PB test. No statistical differences (P=.084) were found among the zirconia brands (Cercon [384 MPa]=Bruxzir [359 MPa]=Katana [416 MPa]) for the POB test. No significant correlations (P>.05) were found between the 4PB, POB, or VH tests and the corresponding CTC test. The Weibull modulus varied for the different specimen geometries.

CONCLUSIONS

The piston-on-3 ball, 4-point bending, and Vickers hardness test results were not correlated with the corresponding crunch-the-crown test.

A new technique for incorporation of TiO2 nanotubes on a pre-sintered Y-TZP and its effect on bond strength as compared to conventional air-borne particle abrasion and silicatization TiO2 nanotubes application on pre-sintered Y-TZP

OBJECTIVE

This study evaluated the microshear bond strength of a resin cement to Y-TZP after different methods of TiO₂ nanotubes (nTiO₂) incorporation on pre-sintered Y-TZP surfaces.

METHODS

nTiO₂ were synthesized and incorporated on Y-TZP slices as follows (n = 15): 1) nTiO₂ mixed with isopropyl alcohol/manual application (MAl); 2) nTiO₂ mixed with acetone/manual application (MAc); 3) nTiO₂ mixed with isopropyl alcohol/high-pressure vacuum application (HPVAl); 4) nTiO₂ mixed with acetone/high-pressure vacuum application (HPVAc). As controls, surfaces were sandblasted with Al₂O₃ (OX) or Rocatec silicatization (ROC). All ceramics were sintered after nTiO₂ incorporation. Surface treatments of OX and ROC were made after sintering. Surfaces were characterized by confocal laser microscopy, scanning electron microscopy (SEM) and energy-dispersive X-ray spectroscopy (EDS). Resin composite cylinders (1.40 mm diameter and 1 mm height) were cemented with a resin cement, stored in water at 37 °C for 24 h and thermocycled for 10 000 cycles before microshear bond strength evaluation. Data were analyzed with one-way ANOVA and Games-Howell (α = 0.05), and fracture analysis was performed using a stereomicroscope.

RESULTS

EDS confirmed the presence of TiO₂ on treated Y-TZP. The confocal analysis showed higher roughness for HPVAc and OX. There were significant differences between surface treatments (p < 0.001). HPVAl (22.96 ± 10.3), OX (34.16 ± 7.9) and ROC (27.71 ± 9.4) showed higher microshear bond strengths and were statistically similar (p > 0.05). MAC showed intermediary values, and HPVAc and MAl presented decreased bond strength, with a high percentage of premature debonding.

CONCLUSION

High-pressure vacuum application of nTiO₂ mixed with isopropyl alcohol was able to produce bond strength values compared to conventional air abrasion and Rocatec silicatization.

SIGNIFICANCE

The infiltration of TiO₂ nanostructures on the pre-sintered Y-TZP is an interesting approach that can improve bond strength without the need of sandblasting methods.

Shear bond strength of resin bonded zirconia and lithium disilicate - effect of surface treatment of ceramics and dentin

Objectives:The purpose of the study was to investigate the effect of ceramic surface pretreatment, effect of resin cement and dentin surface roughness on shear bond strength.

Methodology: Zirconia rods (n = 140) were randomly assigned to air born particle abrasion with aluminum oxide (Al₂O₃) or hot etching with potassium hydrogen difluoride (KHF₂). Lithium disilicate rods (LDS; n = 50) etched with hydrofluoric acid served as reference material. In Part 1 of the study, ceramic rods were cemented to bovine dentin using 5 dual-polymerizing resin cements (Variolink Esthetic, Multilink Automix (Ivoclar Vivadent), Duo-Link (BISCO Dental), Panavia F2.0 (Kuraray Dental), RelyX Unicem (3 M)). Shear bond strength was tested and fracture morphology determined. In Part 2 of the study, test groups with the highest frequency of adhesive fractures between cement and dentin were selected for further bond strength testing with different surface roughness of dentin; ground with P1200 or P80 silicon carbide paper. Dentin samples were fractured vertically to the cemented surface and the adherence between cement and dentin was studied.

Results: The results of Part 1 showed that hot etching of zirconia significantly improved bond strength to Duo-Link cement. In Part 2, RelyX Unicem showed significantly higher bond strength to P1200 compared to P80 ground dentin. For Variolink Esthetic, bond strengths to P1200 and P80 ground dentin were similar. Adhesive fracture between cement and dentin dominated.

Conclusions: A smooth dentin surface (P1200) improved bond strength to RelyX Unicem. Surface roughness was not important for Variolink Esthetic.