Intelligent pH-responsive dental sealants to prevent long-term microleakage

Dodecylmethylaminoethyl methacrylate inhibits Enterococcus faecalis in a pH-dependent manner

OBJECTIVES

Considering the correlation between survival microenvironment of E. faecalis and acidic pH value, this study aimed to investigate the potential of utilizing pH-responsive DMAEM monomers and their copolymers with resin-based root canal sealers to inhibit E. faecalis.

METHODS

Broth microdilution assay, crystal violet staining and qPCR were performed to evaluate antibacterial effects of DMAEM monomers against E. faecalis at different pH. Methacrylate-resin based root canal sealers were prepared and copolymerized with DMAEM. The flow, solubility, water sorption, apical sealing ability and cytotoxicity of sealers were investigated to optimize formulation. The anti-E. faecalis effects of DMAEM copolymers with sealers were evaluated by direct contact test, colony-forming unit counting and live/dead staining.

RESULTS

DMAEM monomers inhibited the growth, biofilm formation and virulence factors expression of E. faecalis in a concentration- and pH-dependent manner. Incorporation of 1.25 % and 2.5 % DMAEM into experimental sealers would not affect the flowability, solubility and periapical sealing ability (P > 0.05), but increased the water sorption of sealers (P < 0.01). Cells viability was higher than 90 % in both 1.25 % and 2.5 % DMAEM groups at pH 7.0. DMAEM copolymers with sealers reduced E. faecalis counts, inhibited biofilm formation and decreased live cells within the biofilm in response to pH values.

SIGNIFICANCE

DMAEM monomers and their copolymers with resin-based sealers possessed antibacterial and antibiofilm effects on E. faecalis in response to pH values. DMAEM is promising to inhibit intraradicular E. faecalis in response to its acidic survival environment and maintain low cytotoxicity under neutral conditions, ensuring their biosafety in case of inadvertent entry into periapical tissues.

Influence of incorporation of nanostructured silver vanadate decorated with silver nanoparticles on roughness, microhardness, and color change of pit and fissure sealants

Objective

The aim of this study was to evaluate the roughness, hardness, and color change of pit and fissure sealants of two commercial brands (Fluroshield ™ and Ultraseal XT ™) incorporated with nanostructured silver vanadate nanomaterial decorated with silver nanoparticles (β-AgVO3) in concentrations (0% - control, 2.5% and 5%).

Material and methods

Two commercial brands Fluroshield TM and Ultraseal XT ™ were used to make the samples with dimensions of 6 × 6 × 4 mm. The control group was made according to the manufacturer's instructions and in the groups with the addition of β-AgVO3, the nanomaterial was added proportionally by mass at percentages of 2.5% and 5%. Roughness properties were evaluated using a 3D Laser Confocal Microscope (n = 10), Knoop microhardness by Microdurometer (n = 10), and color change by Portable Color Spectrophotometer on the CIEDE2000 system (n = 10). Data were evaluated by one-way ANOVA with Bonferroni adjustment and Tukey's mean comparison test at a 5% significance level.

Results

Ultraseal XT ™ sealant roughness showed a significant difference between concentrations with the highest mean for the 5% group (P = 0.010). Regarding the hardness, both sealants showed no significant difference between the groups. Fluroshield ™ sealant showed a significant difference in ΔE00 between the control-2.5% 24.93 (3.49) and control-5% 28.41 (2.58).

Conclusion

It may be concluded that the incorporation of β-AgVO3 influenced the increase in roughness for Ultraseal XT ™ pit and fissure sealant, did not interfere with the microhardness of both sealants, and promoted a change in the color of Fluroshield ™ sealant within clinically acceptable limits.

Effect of varying functional monomers in experimental self-adhesive composites: polymerization kinetics, cell metabolism influence and sealing ability

The aim was to evaluate the effects of adding different functional monomers to experimental self-adhesive composites (SACs) on polymerization kinetics, cell metabolic activity, and sealing ability. SACs were formulated using urethane dimethacrylate as the base monomer and triethylene glycol dimethacrylate. Additionally, 10 wt.% of distinct functional monomers were added - 10-methacryloyloxydecyl dihydrogen phosphate, glycerol phosphate dimethacrylate (GPDM), 2-hydroxyethyl methacrylate (HEMA) or hydroxyethyl acrylamide (HEAA). ATR-FTIR was used to determine real-time polymerization kinetics (20 min,n= 3). The final extrapolated conversion and polymerization rates were determined (DC,max;Rp,max). TheDC,maxvalues were employed to calculate volumetric shrinkage. The MTT assay was performed on MDPC-23 cells using disc extracts at different concentrations (n= 8). Class V cavities were prepared in 60 sound human molars, assigned to six groups (n= 10), depending on the composite used and aging type (T0 or TC, if thermocycled for 10 000 cycles). One-way ANOVA, two-way, andKruskal-Wallistests were employed to treat the data (ɑ= 0.05). Varying the functional monomers had a large impact on DC,max, as confirmed by one-way ANOVA (p<0.001). The highest was obtained for HEMA (64 ± 3%). The HEMA and HEAA formulations were found to be significantly more toxic at concentrations below 100%. For microleakage, having a functional monomer or not did not show any improvement, irrespective of margin or aging period (Mann-Whitney U,p> 0.05). Larger functional monomers MDP and GPDM affected polymerization properties. Conversely, their acidity did not seem to be detrimental to cell metabolic activity. Regarding sealing ability, it seems that the functional monomers did not bring an advantage to the composites. Varying the functional monomer in SACs had a clear impact on the polymerization kinetics as well as on their cytotoxic potential. However, it did not confer better microleakage and sealing. Claiming self-adhesiveness based only on functional monomers seems dubious.

Applications of quaternary ammonium compounds in the prevention and treatment of oral diseases: State-of-the-art and future directions

OBJECTIVES

The aim of this review is to comprehensively summarize the state-of-the-art developments of quaternary ammonium compounds (QACs) in the prevention and treatment of oral diseases. By discussing the structural diversity and the potential killing mechanism, we try to offer some insights for the future research of QACs.

DATA, SOURCES & STUDY SELECTION

A literature search was conducted in electronic databases (Web of Science, PubMed, Medline, and Scopus). Publications that involved the applications of QACs, especially those related to the prevention and treatment of oral diseases, are included.

RESULTS

We have reviewed the relevant research on QACs over the past two decades. The research results indicate that the current applications are mainly focused on dental material modification and direct pharmacological interventions. Concurrently, challenges such as potential risks to normal tissues and impediments in drug resistance and microbial persistence present certain application constraints. The latest studies have encompassed the exploration of smart materials and nanoparticle formulations.

CONCLUSIONS

The killing mechanism may possess a threshold related to charge density. However, the exact process remains enigmatic. The structural diversity and the exploration of intelligent materials and nanoparticle formulations provide directions in development of novel QACs.

CLINICAL SIGNIFICANCE

The intricate oral anatomy, combined with the multifaceted oral microbiome, necessitates specialized materials for the targeted prevention and treatment of oral pathologies. QACs represent a cohort of compounds distinguished by potent anti-infective and anti-tumor attributes. Innovations in intelligent materials and nanoparticle formulations amplify their potential in significantly advancing the prevention and therapeutic interventions for oral diseases.

Innovations in the Design and Application of Stimuli-Responsive Restorative Dental Polymers

The field of dental materials is undergoing rapid advancements in the pursuit of an innovative generation of dental polymeric restorative materials. There is a growing interest in the development of a distinct category of dental polymers that transcend the conventional role of inertly filling prepared cavities. Instead, these materials possess the capacity to actively detect and respond to alterations within the host environment by undergoing dynamic and controlled molecular changes. Despite the well-established status of stimuli-responsive polymeric systems in other fields, their implementation in dentistry is still in its nascent stages, presenting a multitude of promising opportunities for advancement. These systems revolve around the fundamental concept of harnessing distinctive stimuli inherent in the oral environment to trigger precise, targeted, predictable, and demand-driven responses through molecular modifications within the polymeric network. This review aims to provide a comprehensive overview of the diverse categories of stimuli-responsive polymers, accentuating the critical aspects that must be considered during their design and development phases. Furthermore, it evaluates their current application in the dental field while exploring potential alternatives for future advancements.

Anticariogenic Activity of Celastrol and Its Enhancement of Streptococcal Antagonism in Multispecies Biofilm

Dental caries is a chronic disease resulting from dysbiosis in the oral microbiome. Antagonism of commensal Streptococcus sanguinis and Streptococcus gordonii against cariogenic Streptococcus mutans is pivotal to keep the microecological balance. However, concerns are growing on antimicrobial agents in anticaries therapy, for broad spectrum antimicrobials may have a profound impact on the oral microbial community, especially on commensals. Here, we report celastrol, extracted from Traditional Chinese Medicine's Tripterygium wilfordii (TW) plant, as a promising anticaries candidate. Our results revealed that celastrol showed antibacterial and antibiofilm activity against cariogenic bacteria S. mutans while exhibiting low cytotoxicity. By using a multispecies biofilm formed by S. mutans UA159, S. sanguinis SK36, and S. gordonii DL1, we observed that even at relatively low concentrations, celastrol reduced S. mutans proportion and thereby inhibited lactic acid production as well as water-insoluble glucan formation. We found that celastrol thwarted S. mutans outgrowth through the activation of pyruvate oxidase (SpxB) and H2O2-dependent antagonism between commensal oral streptococci and S. mutans. Our data reveal new anticaries properties of celastrol that enhance oral streptococcal antagonism, which thwarts S. mutans outgrowth, indicating its potential to maintain oral microbial balance for prospective anticaries therapy.

Smart Dental Materials Intelligently Responding to Oral pH to Combat Caries: A Literature Review

Smart dental materials are designed to intelligently respond to physiological changes and local environmental stimuli to protect the teeth and promote oral health. Dental plaque, or biofilms, can substantially reduce the local pH, causing demineralization that can then progress to tooth caries. Progress has been made recently in developing smart dental materials that possess antibacterial and remineralizing capabilities in response to local oral pH in order to suppress caries, promote mineralization, and protect tooth structures. This article reviews cutting-edge research on smart dental materials, their novel microstructural and chemical designs, physical and biological properties, antibiofilm and remineralizing capabilities, and mechanisms of being smart to respond to pH. In addition, this article discusses exciting and new developments, methods to further improve the smart materials, and potential clinical applications.

Smart dental materials for antimicrobial applications

Smart biomaterials can sense and react to physiological or external environmental stimuli (e.g., mechanical, chemical, electrical, or magnetic signals). The last decades have seen exponential growth in the use and development of smart dental biomaterials for antimicrobial applications in dentistry. These biomaterial systems offer improved efficacy and controllable bio-functionalities to prevent infections and extend the longevity of dental devices. This review article presents the current state-of-the-art of design, evaluation, advantages, and limitations of bioactive and stimuli-responsive and autonomous dental materials for antimicrobial applications. First, the importance and classification of smart biomaterials are discussed. Second, the categories of bioresponsive antibacterial dental materials are systematically itemized based on different stimuli, including pH, enzymes, light, magnetic field, and vibrations. For each category, their antimicrobial mechanism, applications, and examples are discussed. Finally, we examined the limitations and obstacles required to develop clinically relevant applications of these appealing technologies.

Novel bioactive dental restorations to inhibit secondary caries in enamel and dentin under oral biofilms

OBJECTIVE

To provide the first review on cutting-edge research on the development of new bioactive restorations to inhibit secondary caries in enamel and dentin under biofilms. State-of-the-art bioactive and therapeutic materials design, structure-property relationships, performance and efficacies in oral biofilm models.

DATA, SOURCES AND STUDY SELECTION

Researches on development and assessment new secondary caries inhibition restorations via in vitro and in vivo biofilm-based secondary caries models were included. The search of articles was carried out in Web of Science, PubMed, Medline and Scopus.

CONCLUSIONS

Based on the found articles, novel bioactive materials are divided into different categories according to their remineralization and antibacterial biofunctions. In vitro and in vivo biofilm-based secondary caries models are effective way of evaluating the materials efficacies. However, new intelligent and pH-responsive materials were still urgent need. And the materials evaluation should be performed via more clinical relevant biofilm-based secondary caries models.

CLINICAL SIGNIFICANCE

Secondary caries is a primary reason for dental restoration failures. Biofilms produce acids, causing demineralization and secondary caries. To inhibit dental caries and improve the health and quality of life for millions of people, it is necessary to summarize the present state of technologies and new advances in dental biomaterials for preventing secondary caries and protecting tooth structures against oral biofilm attacks. In addition, suggestions for future studies are provided.

Novel dental resin infiltrant containing smart monomer dodecylmethylaminoethyl methacrylate

Objectives

White spot lesions (WSLs) are prevalent and often lead to aesthetic problems and progressive caries. The objectives of this study were to: (1) develop a novel resin infiltrant containing smart monomer dodecylmethylaminoethyl methacrylate (DMAEM) to inhibit WSLs, and (2) investigate the effects of DMAEM incorporation on cytotoxicity, mechanical properties, biofilm-inhibition and protection of enamel hardness for the first time.

Methods

DMAEM was synthesized using 1-bromododecane, 2-methylamino ethanol and methylmethacrylate. DMAEM with mass fractions of 0%, 1.25%, 2.5% and 5% were incorporated into a resin infiltant containing BisGMA and TEGDMA. Cytotoxicity, mechanical properties and antibacterial effects were tested. After resin infiltration, bovine enamel was demineralized with saliva biofilm acids, and enamel hardness was measured.

Result

DMAEM infiltration did not increase the cytotoxicity or compromise the physical properties when DMAEM mass fraction was below 5% (p > 0.05). Biofilm metabolic activity was reduced by 90%, and biofilm lactic acid production was reduced by 92%, via DMAEM (p < 0.05). Mutans streptococci biofilm CFU was reduced by 3 logs (p < 0.05). When demineralized in acid and then under biofilms, the infiltrant + 5% DMAEM group produced an enamel hardness (mean ± sd; n = 6) of 2.90 ± 0.06 GPa, much higher than 0.85 ± 0.12 GPa of the infiltrant + 0% DMAEM group (p < 0.05).

Significance

A novel resin infiltrant with excellent mechanical properties, biocompability, strong antibacterial activity and anti-demineralization effect was developed using DMAEM for the first time. The DMAEM resin infiltrant is promising for inhibiting WSLs, arresting early caries, and protecting enamel hardness.

Invisible assassin coated on dental appliances for on-demand capturing and killing of cariogenic bacteria

The accumulation of microbes on long-wear artificial dental materials creates a great risk for oral diseases and causes deterioration of material properties. Therefore, smart antibacterial materials capable of resisting the colonization of microorganisms and simultaneously eliminating pathogenic bacteria as needed show outstanding superiority for the recovery of dental health, which are scarcely reported until now. Here, we present a responsive hydrogel coating as invisible assassin on clear overlay appliances target for dental caries. Taking advantage of pH-responsive carboxybetaine methacrylate-dimethylaminoethyl methacrylate copolymer P(CBMA-co-DMAEMA) and antibacterial peptides, the surface potential of hydrogel shifts positively, accompanied with the release of antibacterial peptides when pH gets lower. The hybrid hydrogel layer hence exerts antifouling property and resists bacterial adhesion in normal physiological, while captures and kills cariogenic bacteria in acidic condition. This biocompatible, transparent and stable hydrogel coating has little influence for the aesthetics and mechanical properties of bulk materials. The strategy developed here can provide reference for the design of biomedical devices in other areas.