Integrated advanced oxidation process, sono-Fenton treatment, for mineralization and volume reduction of activated sludge

Free-Standing Nanocomposite Au@Graphene Oxide Continuous Flow Synthesis in Water for Degradation of Organic Dyes

We have developed a rapid and facile method for preparing free-standing nanocomposite of gold nanoparticles with graphene oxide (Au@GO) in water under continuous flow in the absence of harsh reducing agents and any other auxiliary substances, as a method with favourable green chemistry metrics. This uses a vortex fluidic device (VFD) where induced mechanical energy and photo-contact electrification associated with the dynamic thin film in the rapidly rotating tube tilted at 45° while simultaneously UV irradiated (λ=254 nm, 20 W) results in decomposition of water to hydrogen and hydrogen peroxide with growth of the gold nanoparticles on the surface of the GO. We have established that the resulting Au@GO composite sheets rapidly catalyse the degradation of commercial dyes like methyl orange (MO) and methylene blue (MB) using the hydrogen peroxide generated in situ in the VFD. This process relies on active radicals generated through liquid-solid photo-contact electrification of water in the VFD which dramatically minimises the generation of waste in industrial applications, with the reaction having implications for wastewater treatment.

Intensifying the sonochemical degradation of hydrophilic organic contaminants by organic and inorganic additives

The sonochemical system is highly effective at degrading hydrophobic substances but has limitations when it comes to eliminating hydrophilic compounds. This study examines the impact of organic and inorganic additives on improving the sonochemical degradation of hydrophilic pollutants in water. The effects of adding an organic substance (CCl4) and two inorganic ions (Fe2+ and HCO3-) were tested. The treatment was focused on a representative hydrophilic antibiotic, cefadroxil (CDX). Initially, the sonodegradation of CDX without additives was assessed and compared with two reference pollutants more hydrophobic than CDX: dicloxacillin (DCX) and methyl orange (MO). The results highlighted the limitations of ultrasound alone in degrading CDX. Subsequently, the impact of the additives on enhancing the removal of this recalcitrant pollutant was evaluated at two frequencies (375 and 990 kHz). A significant improvement in the CDX degradation was observed with the presence of CCl4 and Fe2+ at both frequencies. Increasing CCl4 concentration led to greater CDX elimination, whereas a high Fe2+ concentration had detrimental effects. To identify the reactive sites on CDX towards the species generated with the additives, theoretical calculations (i.e. Fukui indices and HOMO-LUMO gaps) were performed. These analyses indicated that the β-lactam and dihydrothiazine rings on CDX are highly reactive towards oxidizing species. This research enhances our understanding of the relationship between the structural characteristics of contaminants and the sonochemical frequency in the action of additives having diverse nature.

Saccharomyces pastorianus Residual Biomass Immobilized in a Polymer Matrix as a Biosorbent for Reactive Dye Removal: Investigations in a Dynamic System

The use of residual microbial biomass from various industries in emerging pollutant removal strategies represents a new area of research in the field. In this case, we examined how to remove reactive dyes from an aqueous solution utilizing a biosorbent made of residual biomass from immobilized Saccharomyces pastorianus (S. pastorianus) in a polymer matrix using a dynamic system. Fluidized bed column biosorption investigations were carried out on a laboratory scale. Brilliant Red HE-3B was chosen as the target molecule. The main parameters considered for this purpose were the flow rate (4.0 mL/min; 6.1 mL/min), initial pollutant concentration (51.2 mg/L; 77.84 mg/L), and biosorbent mass (16 g; 20 g). The experimental data of the fluidized bed study were evaluated by mathematical modeling. The Yoon-Nelson, Bohart-Adams, Clark, and Yan models were investigated for an appropriate correlation with the experimental data. An acceptable fit was obtained for a flow rate of 4 mL/min, an initial pollutant concentration of 51.2 mg/L, and a biosorbent amount of 20 g. The obtained results indicate that the biosorbent can be used efficiently in a dynamic system both for the removal of the studied dye and in extended operations with a continuous flow of wastewater. As a conclusion, the investigated biocomposite material can be considered a viable biosorbent for testing in the removal of reactive dyes from aqueous environments and creates the necessary conditions for the extension of studies toward the application of these types of biosorbents in the treatment of industrial effluents loaded with organic dyes.

Enhancing Fenton-like Degradation of Organic Pollutants at Neutral pH by Multivalent Cu NCs/HAp Nanocatalysts

Heterogeneous Fenton-like catalysis is a widely used method for the degradation of organic pollutants. However, it still has some limitations such as low activity in the neutral condition, low conversion rates of metals with different valence states, and potential secondary metal pollution. In this study, a Fenton-like nanocatalyst was first created by generating ultrasmall copper nanoclusters (Cu NCs) on the surface of hydroxyapatite (HAp) through a process of doping followed by modification. This resulted in the formation of a composite nanocatalyst known as Cu NCs/HAp. With the help of hydrogen peroxide (H2O2), Cu NCs/HAp exhibits an outstanding Fenton-like catalytic performance by efficiently degrading organic dyes such as methylene blue under mild neutral conditions. The removal rate can reach over 83% within just 30 min, demonstrating ideal catalytic universality and stability. The improved Fenton-like catalytic performance of Cu NCs/HAp can be ascribed to the synergistic effect of the multivalent Cu species through two simultaneous reaction pathways. During route I, the embedded Cu NCs with a core-shell Cu0/Cu+ structure can undergo sequential oxidation to form Cu2+, which continuously activates H2O2 to generate hydroxyl radicals (•OH) and singlet oxygen (1O2). In route II, Cu2+ produced from route I and initially adsorbed on the surface of HAp can be reduced by H2O2, thus regenerating Cu+ species for route I and achieving a closed-loop reaction. This work has confirmed that Cu NCs loaded on HAp may be an alternative Fenton-like catalyst for degradation of organic pollutants and environmental remediation, opening up new avenues for potential applications of other Cu NCs in future water pollution control.

Where should Fenton go for the degradation of refractory organic contaminants in wastewater?

Fenton process has become a research hotspot due to the nonselective and efficient degradation of dissolved organic matter (DOM) by ·OH. However, there are still many challenges and bottlenecks for conventional Fenton (CF). This study provides the first comprehensive insight into the mechanisms of DOM degradation by the Fenton process, including the various subcategories of humic substances, emerging trace contaminants, including persistent organic pollutants, endocrine disrupting chemicals, and pharmaceuticals and personal care products, and the interference of humus and low molecular weight organic acids on the removal of trace contaminants. In addition, a statistical comparison of the economics of CF and three types of Fenton-like technologies (Photo-Fenton, Electro-Fenton, and Ultrasonic-Fenton) is conducted based on existing studies, which can be used as a reference for engineering applications. Moreover, a brief overview of the categories and characteristics of heterogeneous Fenton, which have been extensively studied in recent years, and a comparison of their catalysts are presented. In the end, the paper advances a possible future research direction.

Enhanced methane yield through sludge two-phase anaerobic digestion process with the addition of calcium hypochlorite

This study investigated the effects of calcium hypochlorite (Ca(ClO)₂) on biomethane generation from sludge two-phase anaerobic digestion system. In first (acidogenic) phase, volatile fatty acids (VFAs) were largely generated when pretreated by Ca(ClO)₂, while the methane yield was severely inhibited. In second (methanogenic) phase, the methane yield was observably enhanced by Ca(ClO)₂. Further calculation showed that the total methane yield from the two phases was firstly promoted from 156.0 ± 4.5 to 269.9 ± 5.2 mL when Ca(ClO)₂ dosage enhanced from 0 to 1.6 g/L, which then reduced to 235.4 ± 5.5 mL when Ca(ClO)₂ content reached 2.0 g/L. Mechanism analysis showed that the suppression of Ca(ClO)₂ on coenzyme F₄₂₀ activity was relieved in methanogenic phase, and the abundances of functional microbes in methanogenic phase were enriched when added with Ca(ClO)₂. The Ca(ClO)₂-based method well realized the balance between efficacy and economy, possessing outstanding potential for large-scale applications.

A critical review on the treatment of dye-containing wastewater: Ecotoxicological and health concerns of textile dyes and possible remediation approaches for environmental safety

The synthetic dyes used in the textile industry pollute a large amount of water. Textile dyes do not bind tightly to the fabric and are discharged as effluent into the aquatic environment. As a result, the continuous discharge of wastewater from a large number of textile industries without prior treatment has significant negative consequences on the environment and human health. Textile dyes contaminate aquatic habitats and have the potential to be toxic to aquatic organisms, which may enter the food chain. This review will discuss the effects of textile dyes on water bodies, aquatic flora, and human health. Textile dyes degrade the esthetic quality of bodies of water by increasing biochemical and chemical oxygen demand, impairing photosynthesis, inhibiting plant growth, entering the food chain, providing recalcitrance and bioaccumulation, and potentially promoting toxicity, mutagenicity, and carcinogenicity. Therefore, dye-containing wastewater should be effectively treated using eco-friendly technologies to avoid negative effects on the environment, human health, and natural water resources. This review compares the most recent technologies which are commonly used to remove dye from textile wastewater, with a focus on the advantages and drawbacks of these various approaches. This review is expected to spark great interest among the research community who wish to combat the widespread risk of toxic organic pollutants generated by the textile industries.

Influence of cell lysis by Fenton oxidation on cryptic growth in sequencing batch reactor (SBR): Implication of reducing sludge source discharge

The cell lysis-cryptic growth was implemented by Fenton oxidation in sequencing batch reactor. Optimizing sludge lysis condition could maximize the release of nutrients and sludge disintegration degree. After Fenton oxidation, the extracellular polymeric substance was obviously destroyed with the sludge average particle decreased from 64 μm to 36 μm. After 5% of the settled sludge in sequencing batch reactor (SBR) was oxidized by Fenton and then returned to SBR, the mixed liquor suspended solids (MLSS) decreased by 19.3% at the end of 35 days operation, the average mixed liquor volatile suspended solids/mixed liquor suspended solids (MLVSS/MLSS) was promoted by 13.3% during the entire operation. Returning lysed sludge had no significant influence on the organics and nitrogen removal, but the total phosphorus removal was distinctly enhanced by generating FePO4 precipitate. Additionally, returning lysed sludge suppressed nitrifying bacteria and promoted denitrifying bacteria slightly. Consequently, the cell lysis-cryptic growth for reducing sludge source discharge from wastewater biological treatment could be achieved on the premise of ensuring effluent quality.

Evaluation and comparison of advanced oxidation processes for the degradation of 2,4-dichlorophenoxyacetic acid (2,4-D): a review

Organochlorine pesticides have generated public concern worldwide because of their toxicity to human health and the environment, even at low concentrations, and their persistence, being mostly nonbiodegradable. The use of 2,4-dichlorophenoxyacetic acid (2,4-D) has increased in recent decades, causing severe water contamination. Several treatments have been developed to degrade 2,4-D. This manuscript presents an overview of the physicochemical characteristics, uses, regulations, environmental and human health impacts of 2,4-D, and different advanced oxidation processes (AOPs) to degrade this organic compound, evaluating and comparing operation conditions, efficiencies, and intermediaries. Based on this review, 2,4-D degradation is highly efficient in ozonation (system O₃/plasma, 99.8% in 30 min). Photocatalytic, photo-Fenton, and electrochemical processes have the optimal efficiencies of degradation and mineralization: 97%/79.67% (blue TiO₂ nanotube arrays//UV), 100%/98% (Fe²⁺/H₂O₂/UV), and 100%/84.3% (MI-meso SnO₂), respectively. The ozonation and electrochemical processes show high degradation efficiencies, but energy costs are also high, and photocatalysis is more expensive with a separation treatment used to recover the catalyst in the solution. The Fenton process is a viable economic-environmental option, but degradation efficiencies are often low (50-70%); however, they are increased when solar UV radiation is used (90-100%). AOPs are promising technologies for the degradation of organic pollutants in real wastewater, so evaluating their strengths and weaknesses is expected to help select viable operational conditions and obtain optimal efficiencies.

Recent trends and developments in Fenton processes for industrial wastewater treatment - A critical review

This study reviews the recent developments in the application of Fenton processes in real industrial wastewater treatment, focusing on heterogeneous catalysts and catalyst regeneration/reuse. This article presents the features, inherent advantages or drawbacks, and primary experimental results obtained on established and emerging Fenton processes, highlighting the course of innovations and current scenario in a research field that has recently undergone rapid transition. Therefore, a comprehensive literature survey was conducted to review studies published over the last decade dealing with application of Fenton processes to industrial wastewater treatment. The research in this field is primarily focused on discovering or synthesizing new materials to substitute conventional iron salt Fenton catalysts and/or regenerate and reuse the spent catalyst, in contrast to optimizing the application of existing materials. Hence, the emphasis is on producing reusable materials, transitioning from linear to circular economy. Some of the major challenges identified herein include analyzing or improving heterogeneous catalyst lifetime, determining the predominant pathway of heterogeneous and homogeneous catalysis to pollutant degradation, and defining the best layout to incorporate Fenton processes into full-scale treatment plants, particularly its coupling with biological treatment.

Electro-Fenton assisted sonication for removal of ammoniacal nitrogen and organic matter from dye intermediate industrial wastewater

The intricacy in the treatment of effluents from the textile sector attracts the researchers since 20th century. Dye intermediate manufacturing industries are responsible for producing the toxic pollutants such as nitro-aromatics, benzene, toluene, phenol, heavy metals etc. with intense colour. The present study focuses on the performance of combined Electro-Fenton (EF) and sonication for the removal of ammoniacal nitrogen and COD from dye intermediate manufacturing wastewater. Batch experiments of EF were performed using graphite electrodes and sonication was applied to the EF treated wastewater to enhance the treatment performance. A number of experiments were executed to discover the influence of pH, applied voltage, Fenton catalyst dosage and time of electrolysis on the removal efficiency of EF batch process was scrutinized. The pH was varied between 2 and 4, applied voltage from 1 to 4V, Fenton catalyst dosage between 50 and 200 mg L^-1 and time between 15 and 180 min. At optimum condition i.e. pH 3, applied voltage 3V, Fenton catalyst dosage of 100 mg L^-1and 120 min electrolysis time, the percentage removal obtained for ammoniacal nitrogen and COD were 59.4% and 79.2% respectively. The removal efficiency was increased to 65.5% for ammoniacal nitrogen and 85.4% for COD after applying sonication to the EF treated wastewater. The removal of ammoniacal nitrogen and COD can be achieved in a scientific and feasible way by combining EF process with sonication.

Lentil waste as novel natural coagulant for agricultural wastewater treatment

Increasing agricultural irrigation to counteract a soil moisture deficit has resulted in the production of hazardous agricultural wastewater with high turbidity and chemical oxygen demand (COD). An innovative, sustainable, and effective solution is needed to overcome the pollution and water scarcity issues caused by the agricultural anthropogenic processes. This research focused on a sustainable solution that utilized a waste (broken lentil) as natural coagulant for turbidity and COD removal in agricultural wastewater treatment. The efficiency of the lentil extract (LE), grafted lentil extract (LE-g-DMC) and aluminium sulphate (alum) coagulants was optimized through the response surface methodology. Three-level Box-Behnken design was used to statistically visualize the complex interactions of pH, concentration of coagulants and settling time. LE achieved a significant 99.55% and 79.87% removal of turbidity and COD at pH 4, 88.46 mg/L of LE and 6.9 minutes of settling time, whereas LE-g-DMC achieved 99.83% and 80.32% removal of turbidity and COD at pH 6.7, 63.08 mg/L of LE-g-DMC and 5 minutes of settling time. As compared to alum, LE-g-DMC required approximately 30% less concentration. Moreover, LE and LE-g-DMC also required 75% and 65% less settling time as compared to the alum. Both LE and LE-g-DMC produced flocs with excellent settling ability (5.77 mg/L and 4.48 mL/g) and produced a significant less volume of sludge (10.60 mL/L and 8.23 mL/L) as compared with the alum. The economic analysis and assessments have proven the feasibility of both lentil-based coagulants in agricultural wastewater treatment.

Environmentally superior cleaning of diatom frustules using sono-Fenton process: Facile fabrication of nanoporous silica with homogeneous morphology and controlled size

Existing techniques for the preparation of silica structures from diatom cells include cleaning of frustules through baking at high temperature and oxidant cleaning using concentrated sulfuric acid, hydrogen peroxide, nitric acid, or sodium dodecyl sulfate (SDS)/ethylenediaminetetraacetic acid (EDTA). In this study, sono-Fenton (SF) process was examined to prepare nanoporous silica through cleaning diatom frustules, while preserving their structural features. Single colonies of Cyclotella sp. were cultivated in batch mode f/2-enriched seawater. Combination of Fenton process with ultrasonication was found to be more efficient than the sum of individual processes in the removal of organic compounds from Cyclotella sp. structure. The optimized amounts of operational parameters were determined as suspension pH of 3, diatom cell density of 4.8 × 10⁵ cell mL^-1, H₂O₂ concentration of 60 mM, Fe²⁺ concentration of 15 mM, ultrasound irradiation power of 400 W and the temperature of 45 °C. The results of energy-dispersive X-ray spectroscopy (EDX) and thermal gravimetry (TG) analyses proved that organic materials covering the cell wall were significantly removed from the frustules through SF process. Scanning electron microscopy (SEM) images showed that after SF treatment, silica nanostructures were produced having uniform pores less than 15 nm in diameter. N₂ adsorption-desorption isotherms demonstrated that almost non-porous structure of diatom frustules became mesoporous during removing the organic matrix. Lipids, amino acids, carbohydrates and organic acids or their oxidized products were identified using GC-MS analysis as the main organic compounds released from diatom cells to the solution after SF treatment. Treated frustules exhibited adsorption capability of 91.2 mg/g for Methylene Blue, which was almost 2.5 times higher than that of untreated frustules (34.8 mg/g).

Preparation of Sludge-Derived Activated Carbon by Fenton Activation and the Adsorption of Eriochrome Black T

Sludge-derived activated carbon (SAC) was prepared by Fenton activation and calcination, and used as adsorbent to eliminate Eriochrome Black T (EBT) dye from aqueous media. The characterization results indicated that the produced SAC had a porous structure, high specific surface area, and abundant functional groups on its surface. The adsorption process was affected by pH, adsorbent dosage, time, and temperature. The adsorption capacity increased with temperature, and the highest adsorption capacity reached 178.2 mg·g-1 in 48 h at 318 K and pH 6. The results of the adsorption isotherm, kinetic, and thermodynamic analyses revealed that the adsorption of EBT onto SAC was naturally endothermic and spontaneous, involved both physical and chemical processes, and belonged mostly to the multilayer type of adsorption.