Adsorption characteristics of nitrite on natural filter medium: Kinetic, equilibrium, and site energy distribution studies

Efficient adsorption of hexavalent chromium in water by torrefaction biochar from lignin-rich kiwifruit branches: The combination of experiment, 2D-COS and DFT calculation

A biochar (KBC) enriched with O functional groups was prepared by torrefaction using lignin-rich kiwifruit branches (KBM) as a raw material, which was characterized, and then KBC was used to adsorb hexavalent chromium (Cr6+) from water. The results showed that KBC contained more functional groups compared to KBM. The maximum adsorption of Cr6+ by KBC could reach 143.64 mg·g-1 and also had better adsorption performance than other adsorbents reported in some other reports. Cr6+ absorption by KBC was mainly a mechanism of electrostatic interaction and adsorption-reduction coupling. FTIR and XPS revealed that -OH, -COOH, CO and CC on KBC participated in Cr6+ adsorption and new groups (C=O) were generated during the process of adsorption, which implied that a redox reaction occurred. 2D-COS and DFT calculations showed that the order of functional groups on KBC interacting with Cr6+ was -OCH3 > -COOH > -OH > phenolic hydroxyl, and the binding tightness of the different functional groups to Cr6+ was -OCH3 (the shortest displacement of both groups after the adsorption) > -COOH > -OH > phenolic hydroxyl. KBC has good regeneration performance, and it is a good adsorbent for Cr6+.

Enhanced adsorption of phosphate by rice straw-based biochar prepared via metal impregnation and bio-template technology

Phosphate removal from water through green, highly efficient technologies has received much attention. Biochar is an effective adsorbent for phosphate removal. However, adsorption capacity of phosphate on pristine rice straw-based biochar was not optimistic due to low anion exchange capacity. In this study, Fe-modified, Mg-modified and MgFe-modified rice straw-based biochar (Fe-BC, Mg-BC and MgFe-BC) were prepared by combining metal impregnation and biological template methods to improve the adsorption capacity of phosphate. The surface characteristics of biochar and the adsorption behavior of phosphate on biochar were investigated. The modified biochar had the specific surface area of 17.910-39.336 m2/g, and their surfaces were rich in a large number of functional groups and metal oxides. Phosphate release was observed on pristine rice straw-based biochar without metal impregnation. The maximum adsorption capacities of phosphate on MgFe-BC, Mg-BC and Fe-BC at 298 K were 6.93, 5.75 and 0.23 mg/g, respectively. Adsorption was a spontaneous endothermic process, while chemical adsorption dominated and electrostatic attraction and pores filling existed simultaneously. Based on the site energy distribution theory study, the standard deviation of MgFe-BC decreased from 6.96 to 4.64 kJ/mol with temperature increasing, which proved that the higher the temperature would cause the lower heterogeneity. Moreover, the effects of pH, humic acid, co-existing ions and ionic strength on phosphate adsorption of MgFe-BC were also discussed. MgFe-BC with fine pores and efficient adsorption sites is an ideal adsorbent for phosphate removal from water.

Municipal sludge biochar skeletal sodium alginate beads for phosphate removal

A novel Fe/La decorative biochar filled in sodium alginate beads (SA-KBC-Fe/La) was prepared by a simple sol-gel method and applied to adsorb phosphate (P) efficiently from water in this study. The morphology, structure and chemical component of the hydrogel beads were characterized in detail. And the synthesized bead exhibited easy separation and high P uptake of 46.65 mg/g when the Fe: La was of 1: 2 at 298 K with initial P of 100 mg/L, which was much higher than SA gel bead. The adsorption showed that the optimal pH was 6, and the adsorption was met with pseudo-second-order kinetics and Langmuir isothermal models, indicating a chemical adsorption process. The adsorption capacity remained 82 % after 5 cycles of adsorption. The adsorption mechanism of P was mainly of ligand exchange and electrostatic attraction. Compared with other reported adsorbents, the modification of Fe/La could enhance the mechanical property of SA-KBC-Fe/La beads with increasing active sites. Additionally, the involved biochar could lead to excellent thermal stability and hierarchical porous structure of beads with larger specific surface area (54.22 m2/g). The study could provide new ideas for P removal and strategy for the final disposal of municipal sludge.

Facile activation of natural calcium-rich sepiolite with oxalic acid for selective Pb(II) removal: Highly-efficient performance, mechanisms and site energy distribution

The design and development of adsorbents with high efficiency, selectivity, and economy for Pb(II) are essential to environmental governance and ecological safety. Herein, an oxalic acid (OA) activated natural sepiolite (nSEP) composite for highly efficient Pb(II) removal was prepared by a facile impregnation strategy. The OA activated nSEP nanocomposite (OA-nSEP) was characterized by various instrumental techniques and its adsorption performance towards Pb(II) was further evaluated through a series of static and dynamic experiments under various environmental conditions. Results revealed that OA reacted with the calcium impurities in nSEP to form calcium oxalate, causing mesoporous structure and larger specific surface area of OA-nSEP. The obtained OA-nSEP possessed super high Pb(II) adsorption capacities (858.4-1252 mg/g), which were much higher than that of most modified clays or conventional materials. The average adsorption site energy and the standard deviation of the site energy distribution were analyzed to investigate the strength of Pb(II) binding onto OA-nSEP and the adsorption site heterogeneity. Mechanism studies confirmed that oxalate groups exerted a primary role in the adsorption process. X-ray diffraction and X-ray photoelectron spectrometry (XPS) unveiled that the coordination of oxalate with Pb(II) and precipitation of lead oxalate was responsible for the high efficiency and selectivity. Distinguishing feature of high adsorption capacity, specific selective adsorption, abundant availability, and splendid reusability make the OA-nSEP a promising candidate for eliminating Pb(II) in practical scenarios.

Efficient removal of cadmium by salts modified-biochar: Performance assessment, theoretical calculation, and quantitative mechanism analysis

Modified biochar is a feasible adsorbent to solve cadmium pollution in water. However, few studies could elucidate the mechanism of cadmium adsorption by biochar from a molecular perspective. Furthermore, traditional modification methods are costly and have the risk of secondary contamination. Hence, several environmentally friendly sodium salts were used to modify the water chestnut shell-based biochar and employ it in the Cd²⁺ adsorption in this work. The modification of sodium salt could effectively improve the specific surface area and aromaticity of biochar. Na₃PO₄ modified biochar exhibited the highest Cd²⁺ adsorption capacity (112.78 mg/g). The adsorption of Cd²⁺ onto biochar was an endothermic, monolayer, chemisorption process accompanied by intraparticle diffusion. Microscopically, the enhancement of aromatization after modification made Cd²⁺ more likely to interact with the regions rich in π electrons and lone pair electrons. This study provided a new research perspective and application guidance for heavy metal adsorption on biochar.

Influence of modification methods on physicochemical and structural properties of soluble dietary fiber from corn bran

•

Physical treatment with enzymes effectively modified soluble dietary fiber (SDF).

•

Twin-screw extrusion assisted with enzyme reached the highest extraction yield.

•

The physicochemical properties of modified SDF were improved.

•

Modified SDF possessed a better antioxidant activity.

Soluble dietary fiber (SDF), which is a component of dietary fibers exhibit many physiological functions, biological activity, and good gel forming ability. In this study, extraction of SDF from corn bran was evaluated using twin-screw extrusion and ultrasonic treatment and the combinations of the respective methods with dual enzyme hydrolysis. The monosaccharide compositions, molecular weight, physicochemical properties, and structural and functional characteristics were determined. The results showed that ultrasonic and twin-extrusion treatments significantly increased the SDF content from 2.42 to 4.58 and 6.54%, respectively. Dual enzyme hydrolysis further increased the SDF content. Modification treatment changed the monosaccharide composition, improved physicochemical and functional properties, such as water and oil holding capacity, nitrite adsorption, and antioxidative ability. In conclusion, physical modification combined with enzyme treatment distinctly improved the extraction yield, physicochemical and functional properties of SDF. Therefore, the modified SDF is suitable as a functional food additive.

Nitrogen removal from domestic wastewater using core-shell anthracite/Mg-layered double hydroxides (LDHs) in constructed wetlands

To investigate the mechanism of nitrogen removal by anthracites and enhance the nitrogen removal efficiency in constructed wetland, three kinds of layered double hydroxides (MgFe-LDHs, MgCo-LDHs, MgAl-LDHs) were prepared by co-precipitation under alkaline conditions and coated in situ on the surface of anthracites to synthesize core-shell anthracites/Mg-LDHs composites. Experiments with different treatments (columns loaded with original anthracites and anthracite/Mg-LDH composites) were conducted to study the nitrogen removal efficiency of domestic wastewater in constructed wetlands. The results of nitrogen removal experiments showed that the anthracite/MgAl-LDH composite had the best performance with average removal rates of 53.69%, 72.91%, and 47.43% for TN, NH₄⁺-N, and organic nitrogen, respectively. Modification changed the denitrification mode of the anthracites. The data of adsorption isothermal experiments were fitted better with the Freundlich model. The amount of ammonifier, nitrosobacteria, nitrobacter, and denitrifier on the surface of the Mg-LDH-modified anthracite was higher than that of the original anthracite. The performance of the anthracite in removing nitrogen was attributed to physical interception, chemical adsorption, and biological degradation. Moreover, the modified anthracites were superior to the original anthracite in the chemical adsorption and biodegradation, which indicated that coating the Mg-LDHs on the surface of common anthracite was a potential method to improve the nitrogen removal efficiency of domestic wastewater and to restore the eutrophic water body.

Investigation of physico-chemical properties of hydrochar and composition of bio-oil from the hydrothermal treatment of dairy manure: Effect of type and usage volume of extractant

Hydrothermal treatment for dairy manure into value-added hydrochar and bio-oil is a potential technology for its resource utilization. During the process of treatment, extractant is applied to the separation of hydrochar and bio-oil. In this study, three polar extractants (ethyl acetate, dichloromethane, diethyl ether) and two nonpolar extractants (n-hexane and petroleum ether) were used, and the physico-chemical properties of hydrochar and the composition of bio-oil were investigated. Compared with nonpolar extractants, polar extractants could extract the bio-oil absorbed on the hydrochar exterior and interior surface, resulting in more mass loss of hydrochar and better extraction performance on the production of bio-oil. The decrease of H/C atomic ratio and the increase of O/C atomic ratio indicated the demethanation tendency to occur during the extraction process, and enhanced the hydrochar stability. The scanning electron microscope and specific surface area analysis revealed that polar extractant had a more positive effect than nonpolar extractant on the occurrence of disperse spherical microparticles and the augment of hydrochar specific surface area. The bio-oil from polar extractant mainly consisted of N-containing compounds, ketones, phenols and acids, while the bio-oil from nonpolar extractant mainly consisted of esters, alkanes and aromatics. These results reveal that the hydrochar extracted by polar solvent exerts a greater potential for the production of carbon-based material.

A novel Biochar modified by Chitosan-Fe/S for tetracycline adsorption and studies on site energy distribution

A novel wasted sludge-based Biochar modified by Chitosan and Fe/S (BCFe/S) was prepared for tetracycline (TC) removal from water. To investigate the similarities and differences in adsorption behaviors between Biochar and BCFe/S, characterization, kinetics, isotherms and thermodynamics were discussed. The studies on site energy distribution (SED) were also presented. The results showed that the maximum TC adsorption amount was 51.78 mg/g for Biochar, while it was 183.01 mg/g for BCFe/S-4. Meanwhile, electrostatic attraction, π-π stacking, pore filling, silicate bonding and hydrogen bonding were the main adsorption mechanisms for TC removal by Biochar. Besides above mechanisms, chelating and ion exchange were also accounted for adsorption mechanisms for TC uptake by BCFe/S-4. Moreover, SED results revealed that the surface of Biochar was more homogeneous while the surface of BCFe/S-4 was more heterogeneous at higher temperature. Findings of this work could offer valuable information in designing adsorbents and investigating adsorption mechanisms.

Adsorption Capability of Fe-HT3.0 for Nitrite and Nitrate Ions in a Binary Solution System

In this study, the adsorption capability of Fe-HT3.0 for nitrite and nitrate ions in a binary solution system was evaluated. It was found that the amount of nitrite and nitrate ions adsorbed in a single solution (1.19 and 1.27 mmol/g, respectively) was higher than that in a binary solution (0.36 and 0.90 mmol/g, respectively). Equilibrium adsorption was attained within 6-24 h. The adsorption data were fitted to a pseudo-second-order model (correlation coefficient: 0.999), and indicated that the adsorption of both nitrite and nitrate ions is controlled by chemical sorption. Additionally, the binding energies before and after the adsorption of nitrite and nitrate ions in the binary solution system were measured. After adsorption, new nitrogen peaks (approx. 399 and 403 eV) were detected. The results of this study show the potential of Fe-HT3.0 for the removal of nitrite and nitrate ions from aqueous solution systems.