Optimization of cadmium biosorption by Shewanella putrefaciens using a Box-Behnken design

Removal of food dyes using biological materials via adsorption: A review

It is alarming that synthetic food dyes (FD) are widely used in various industries and that these facilities discharge their wastewater into the environment without treating it. FDs mixed into industrial wastewater pose a threat to the environment and human health. Therefore, removing FDs from wastewater is very important. This review explores the burgeoning field of FD removal from wastewater through adsorption using biological materials (BMs). By synthesizing a wealth of research findings, this comprehensive review elucidates the diverse array of BMs employed, ranging from algae and fungi to agricultural residues and microbial biomass. Furthermore, this review investigates challenges in practical applications, such as process optimization and scalability, offering insights into bridging the gap between laboratory successes and real-world implementations. Harnessing the remarkable adsorptive potential of BMs, this review presents a roadmap toward transformative solutions for FD removal, promising cleaner and safer production practices in the food and beverage industry.

Optimization of desorption parameters using response surface methodology for enhanced recovery of arsenic from spent reclaimable activated carbon: Eco-friendly and sorbent sustainability approach

Desorption and adsorbent regeneration are imperative factors that are required to be taken into account when designing the adsorption system. From the environmental, economic, and practical points of view, regeneration is necessary for evaluating the efficiency and sustainability of synthesized adsorbents. However, no study has investigated the optimization of arsenic species desorption from spent adsorbents and their regeneration ability for reuse as well as safe disposal. This study aims to investigate the desorption ability of arsenic ions adsorbed on hybrid granular activated carbon and the optimization of the independent factors influencing the efficient recovery of arsenic species from the spent activated carbon using central composite design of the response surface methodology. The activated carbon before the sorption process and after the adsorption-desorption of arsenic ions have been characterized using SEM-EDX, FTIR, and TEM. The study found that all the investigated independent desorption variables greatly influence the retrievability of arsenic ions from the spent activated carbon. Using the desirability function for the optimization of the independent factors as a function of desorption efficiency, the optimum experimental conditions were solution pH of 2.00, eluent concentration of 0.10 M, and temperature of 26.63 ℃, which gave maximum arsenic ions recovery efficiency of 91 %. The validation of the quadratic model using laboratory confirmatory experiments gave an optimum arsenic ions desorption efficiency of 97 %. Therefore, the study reveals that the application of the central composite design of the response surface methodology led to the development of an accurate and valid quadratic model, which was utilized in the enhanced optimization of arsenic ions recovery from the spent reclaimable activated carbon. More so, the desorption isotherm and kinetic data of arsenic were well correlated with the Langmuir and the pseudo-second-order models, while the thermodynamics studies indicated that arsenic ions desorption process was feasible, endothermic, and spontaneous.

Advancements in bacterial chemotaxis: Utilizing the navigational intelligence of bacteria and its practical applications

The fascinating world of microscopic life unveils a captivating spectacle as bacteria effortlessly maneuver through their surroundings with astonishing accuracy, guided by the intricate mechanism of chemotaxis. This review explores the complex mechanisms behind this behavior, analyzing the flagellum as the driving force and unraveling the intricate signaling pathways that govern its movement. We delve into the hidden costs and benefits of this intricate skill, analyzing its potential to propagate antibiotic resistance gene while shedding light on its vital role in plant colonization and beneficial symbiosis. We explore the realm of human intervention, considering strategies to manipulate bacterial chemotaxis for various applications, including nutrient cycling, algal bloom and biofilm formation. This review explores the wide range of applications for bacterial capabilities, from targeted drug delivery in medicine to bioremediation and disease control in the environment. Ultimately, through unraveling the intricacies of bacterial movement, we can enhance our comprehension of the intricate web of life on our planet. This knowledge opens up avenues for progress in fields such as medicine, agriculture, and environmental conservation.

Efficient Immobilization of heavy metals using newly synthesized magnetic nanoparticles and some bacteria in a multi-metal contaminated soil

Simultaneous application of modified Fe3O4 with biological treatments in remediating multi-metal polluted soils, has rarely been investigated. Thus, a pioneering approach towards sustainable environmental remediation strategies is crucial. In this study, we aimed to improve the efficiency of Fe3O4 as adsorbents for heavy metals (HMs) by applying protective coatings. We synthesized core-shell magnetite nanoparticles coated with modified nanocellulose, nanohydrochar, and nanobiochar, and investigated their effectiveness in conjunction with bacteria (Pseudomonas putida and Bacillus megaterium) for remediating a multi-metal contamination soil. The results showed that the coatings significantly enhanced the immobilization of heavy metals in the soil, even at low doses (0.5%). The coating of nanocellulose had the highest efficiency in stabilizing metals due to the greater variety of surface functional groups and higher specific surface area (63.86 m2 g-1) than the other two coatings. Interestingly, uncoated Fe3O4 had lower performance (113.6 m2 g-1) due to their susceptibility to deformation and oxidation. The use of bacteria as a biological treatment led to an increase in the stabilization of metals in soil. In fact, Pseudomonas putida and Bacillus megaterium increased immobilization of HMs in soil successfully because of extracellular polymeric substances and intensive negative charges. Analysis of metal concentrations in plants revealed that Ni and Zn accumulated in the roots, while Pb and Cd were transferred from the roots to the shoots. Treatment Fe3O4 coated with modified nanocellulose at rates of 0.5 and 1% along with Pseudomonas putida showed the highest effect in stabilizing metals. Application of coated Fe3O4 for in-situ immobilization of HMs in contamination soils is recommendable due to their high metal stabilization efficiency and suitability to apply in large quantities.

Applying circular economy principles and life cycle assessment: A novel approach using vine shoots waste for cadmium removal from water

This research investigates the potential of utilizing vine shoots, a byproduct of the viticulture industry, as biosorbent for cadmium removal from aqueous solutions. The Spanish wine industry, one of the most influential sectors, produces two to three million tons of vine shoots. By using vine shoots as biosorbent, this study contributes to the circular economy paradigm, transforming waste materials into valuable resources and minimizing environmental impacts associated with waste generation and disposal. The research underscores the significance of vine shoots in biosorption due to its high lignocellulosic content. By experimental analysis, the efficacy of vine shoots in cadmium biosorption is evaluated, considering factors such as environmental impact or energy consumption. This study examines the effect of six key input parameters on cadmium removal efficiency and power consumption, identifying optimal conditions for maximum removal with minimal energy consumption. The findings suggest that vine shoots offer promising biosorption capabilities, promoting sustainability in wastewater treatment and environmental remediation efforts. By employing the response surface method alongside desirability functions, the study determined the optimal variables for two distinct optimization scenarios. Notably, in the second optimization scenario, a cadmium removal rate of 99.23 % was achieved while consuming 25.6 W of power. The input parameters for this achievement should be set as follows: initial cadmium concentration of 100 ppm, pH level of 8, stirring time of 75 min, stirring speed of 100 rpm, temperature of 26 °C, and a dose of vine shoots of 0.1 g.

Screening of cadmium-chromium-tolerant strains and synergistic remediation of heavy metal-contaminated soil using king grass combined with highly efficient microbial strains

The present study involved the isolation of two cadmium (Cd) and chromium (Cr) resistant strains, identified as Staphylococcus cohnii L1-N1 and Bacillus cereus CKN12, from heavy metal contaminated soils. S. cohnii L1-N1 exhibited a reduction of 24.4 % in Cr6+ and an adsorption rate of 6.43 % for Cd over a period of 5 days. These results were achieved under optimal conditions of pH (7.0), temperature (35 °C), shaking speed (200 rpm), and inoculum volume (8 %). B. cereus strain CKN12 exhibited complete reduction of Cr6+ within a span of 48 h, while it demonstrated a 57.3 % adsorption capacity for Cd over a period of 120 h. These results were achieved under conditions of optimal pH (8.0), temperature (40 °C), shaking speed (150 rpm), and inoculum volume (2-3 %). Additionally, microcharacterization and ICP-MS analysis revealed that Cr and Cd were accumulated on the cell surface, whereas Cr6+ was mainly reduced extracellularly. Subsequently, a series of pot experiments were conducted to provide evidence that the inclusion of S. cohnii L1-N1 or B. cereus CKN12 into the system resulted in a notable enhancement in both the plant height and biomass of king grass. In particular, it was observed that the presence of S. cohnii L1-N1 or B. cereus CKN12 in king grass led to a significant reduction in the levels of Cd and Cr in the soils (36.0 % and 27.8 %, or 72.9 % and 47.4 %, respectively). Thus, the results of this study indicate that the combined use of two bacterial strains can effectively aid in the remediation of tropical soils contaminated with moderate to light levels of Cd and Cr.

Uranium speciation and distribution on the surface of Shewanella putrefaciens in the presence of inorganic phosphate and zero-valent iron under anaerobic conditions

Shewanella putrefaciens (S. putrefaciens) is one of the main microorganisms in soil bioreactors, which mainly immobilizes uranium through reduction and mineralization processes. However, the effects of elements such as phosphorus and ZVI, which may be present in the actual environment, on the mineralization and reduction processes are still not clearly understood and the environment is mostly in the absence of oxygen. In this study, we ensure that all experiments are performed in an anaerobic glove box, and we elucidate through a combination of macroscopic experimental findings and microscopic characterization that the presence of inorganic phosphates enhances the mineralization of uranyl ions on the surface of S. putrefaciens, while zero-valent iron (ZVI) facilitates the immobilization of uranium by promoting the reduction of uranium by S. putrefaciens. Interestingly, when inorganic phosphates and ZVI co-exist, both the mineralization and reduction of uranium on the bacterial surface are simultaneously enhanced. However, these two substances exhibit a certain degree of antagonism in terms of uranium immobilization by S. putrefaciens. Furthermore, it is found that the influence of pH on the mineralization and reduction of uranyl ions is far more significant than that of inorganic phosphates and ZVI. This study contributes to a better understanding of the environmental fate of uranium in real-world settings and provides valuable theoretical support for the bioremediation and risk assessment of uranium contamination.

Evaluation of the Differential Postbiotic Potential of Shewanella putrefaciens Pdp11 Cultured in Several Growing Conditions

The increased knowledge of functional foods has led to the development of a new generation of health products, including those containing probiotics and products derived from them. Shewanella putrefaciens Pdp11 (SpPdp11) is a strain described as a probiotic that exerts important beneficial effects on several farmed fish. However, the use of live probiotic cells in aquaculture has limitations such as uncertain survival and shelf life, which can limit their efficacy. In addition, its efficacy can vary across species and hosts. When probiotics are administered orally, their activity can be affected by the environment present in the host and by interactions with the intestinal microbiota. Furthermore, live cells can also produce undesired substances that may negatively impact the host as well as the risk of potential virulence reversion acquired such as antibiotic resistance. Therefore, new alternatives emerged such as postbiotics. Currently, there is no knowledge about the postbiotic potential of SpPdp11 in the aquaculture industry. Postbiotic refers to the use of bacterial metabolites, including extracellular products (ECPs), to improve host physiology. However, the production of postbiotic metabolites can be affected by various factors such as cultivation conditions, which can affect bacterial metabolism. Thus, the objective of this study was to evaluate the postbiotic potential of ECPs from SpPdp11 under different cultivation conditions, including culture media, temperature, growth phase, and salinity. We analyzed their hydrolytic, antibacterial, antiviral, and cytotoxic capacity on several fish cell lines. The results obtained have demonstrated how each ECP condition can exert a different hydrolytic profile, reduce the biofilm formation by bacterial pathogens relevant to fish, lower the titer of nervous necrosis virus (NNV), and exert a cytotoxic effect on different fish cell lines. In conclusion, the ECPs obtained from SpPdp11 have different capacities depending on the cultivation conditions used. These conditions must be considered in order to recover the maximum number of beneficial capacities or to choose the appropriate conditions for specific activities.

Enhanced simultaneous removal of sulfamethoxazole and zinc (II) in the biochar-immobilized bioreactor: Performance, microbial structures and gene functions

Biochar-immobilized functional bacteria Bacillus SDB4 was applied for sulfamethoxazole (SMX) and zinc (Zn2+) simultaneous removal in the bioreactor. Under the optimal operating conditions of HRT of 10 h, pH of 7.0, SMX concentration of 10 mg L-1 and Zn2+ concentration of 50 mg L-1, the removal efficiencies of SMX and Zn2+ by the immobilized reactor (IR) were 97.42% and 96.14%, respectively, 20.39% and 30.15% higher than those by free bioreactor (FR). SEM-EDS and FTIR results revealed that the functional groups and light metals on the carrier promoted the biosorption and biotransformation of SMX and Zn2+ in IR. Moreover, the improvement of SMX and Zn2+ removal might be related to the abundance enhancement of functional bacteria and genes. Bacillus SDB4 responsible for SMX and Zn2+ removal was the main strain in IR and FR. Biochar increased the relative abundance of Bacillus from 32.12% in FR to 38.73% in IR and improved the abundances of functional genes (such as carbohydrate metabolism, replication and repair and membrane transport) by 1.82%-11.04%. The correlations among the physicochemical properties, microbial communities, functional genes and SMX-Zn2+ co-contaminant removal proposed new insights into the mechanisms of biochar enhanced microbial removal of antibiotics and heavy metals in biochar-immobilized bioreactors.

High-Efficiency Removal of Lead and Nickel Using Four Inert Dry Biomasses: Insights into the Adsorption Mechanisms

In this study, inert dry bioadsorbents prepared from corn cob residues (CCR), cocoa husk (CH), plantain peels (PP), and cassava peels (CP) were used as adsorbents of heavy metal ions (Pb²⁺ and Ni²⁺) in single-batch adsorption experiments from synthetic aqueous solutions. The physicochemical properties of the bioadsorbents and the adsorption mechanisms were evaluated using different experimental techniques. The results showed that electrostatic attraction, cation exchange, and surface complexation were the main mechanisms involved in the adsorption of metals onto the evaluated bioadsorbents. The percentage removal of Pb²⁺ and Ni²⁺ increased with higher adsorbent dosage, with Pb²⁺ exhibiting greater biosorption capacity than Ni²⁺. The bioadsorbents showed promising potential for adsorbing Pb²⁺ with monolayer adsorption capacities of 699.267, 568.794, 101.535, and 116.820 mg/g when using PP, CCR, CH, and CP, respectively. For Ni²⁺, Langmuir's parameter had values of 10.402, 26.984, 18.883, and 21.615, respectively, for PP, CCR, CH, and CP. Kinetics data fitted by the pseudo-second-order model revealed that the adsorption rate follows this order: CH > CP > CCR > PP for Pb²⁺, and CH > CCR > PP > CP for Ni²⁺. The adsorption mechanism was found to be controlled by ion exchange and precipitation. These findings suggest that the dry raw biomasses of corn cob residues, cocoa husk, cassava, and plantain peels can effectively remove lead and nickel, but further research is needed to explore their application in industrial-scale and continuous systems.

Adsorption of Cd (II) by a novel living and non-living Cupriavidus necator GX_5: optimization, equilibrium and kinetic studies

Biosorbents have been extensively studied for heavy metal adsorption due to their advantages of low cost and high efficiency. In the study, the living and non-living biomass of Cupriavidus necator GX_5 previously isolated were evaluated for their adsorption capacity and/or removal efficiency for Cd (II) through batch experiments, SEM and FT-IR investigations. The maximum removal efficiency rates for the live and dead biomass were 60.51% and 78.53%, respectively, at an optimum pH of 6, a dosage of 1 g/L and an initial Cd (II) concentration of 5 mg/L. The pseudo-second-order kinetic model was more suitable for fitting the experimental data, indicating that the rate-limiting step might be chemisorption. The Freundlich isotherm model fit better than the Langmuir isotherm model, implying that the adsorption process of both biosorbents was heterogeneous. FT-IR observation reflected that various functional groups were involved in Cd (II) adsorption: -OH, -NH, C=O, C-O and C-C groups for the living biomass and -OH, -NH, C-H, C = O, C-N and N-H groups for the dead biomass. Our results imply that non-living biosorbents have a higher capacity and stronger strength for absorbing Cd (II) than living biomass. Therefore, we suggest that dead GX_5 is a promising adsorbent and can be used in Cd (II)-contaminated environments.

Response surface method for optimization of process variables for bioaccumulation of metals with Jatropha curcas on fly ash-amended soil

Heavy metal contamination is a serious rising issue with the dumping of fly ash (FA). A recent focus of researches and practices tends towards reutilization of FA with bioremediation technique using various plants. The present research aimed to investigate optimum metal extraction in fly ash-amended soil using microbes and treated wastewater with Jatropha curcas plant using response surface methodology (RSM). The Box-Behnken design was used to determine the optimum condition for maximum metal remediation with three levels and three variables, viz., fly ash percentage (5, 12.5, 20%), microbial dose (0.5, 5.25, 10 ml), and contaminant level of water to irrigate the plant (freshwater, treated wastewater, untreated wastewater). The approach adopted was to set fly ash percentage as "maximum," microbial dose as "minimum," and contaminant level of water to irrigate the plant as "in range." The outcome of the present research provided the best prediction models, integrated the process variables, and developed rotational curves for analyzing metal remediation in 360° rotation for Fe, Mn, Zn, Cu, and Al as responses of interest. The optimum conditions for maximum bioremediation from fly ash-amended soils by bioaccumulation on Jatropha curcas plant worked out as 13.866% fly ash, 4.088 ml microbial dose, and treated wastewater as type of water to irrigate the plant that bioaccumulated Fe, Mn, Zn, Cu, and Al as to 26.904, 0.760, 0.160, 0.162, and 12.895 mg/l.

Biosorption of cadmium from aqueous solution by combination of microorganisms and chitosan: response surface methodology for optimization of removal conditions

The food-grade adsorbents of Saccharomyces cerevisiae (10⁸ CFU/mL), Bifidobacterium longum (10⁸ CFU/mL) and chitosan (1%w/v) alone or in combination were used for biosorption of cadmium (Cd) from aqueous solution. Among the tested adsorbents, combination of B. longum and chitosan had the highest efficiency. Therefore, biosorption process with B. longum/chitosan as the most efficient biosorbent was optimized by variables of pH (3-6), temperature (4-37 °C), contact time (5-180 min) and Cd concentrations (0.01-5 mg/L) using RSM. Twenty-seven tests were carried out and the data fitted to the second-order polynomial models. Results revealed that 99.11% of Cd was reduced within 180 min at concentration of 2.5 mg/L, pH 6 and temperature of 20.5 °C that were considered as the optimal conditions for Cd removal. The trend of isotherm was more fitted to the Langmuir model and maximum biosorption capacity was obtained about 3.61 mg/g. The pseudo-second-order fitted the biosorption kinetics for Cd ions. The B. longum/chitosan biosorbent exhibited the high affinity to Cd ion in the presence of coexisting metal ions. It could remove 81.18% of Cd from simulated gastrointestinal tract. Thus, B. longum/chitosan can have good potential as an effective adsorbent for Cd biosorption from aqueous solutions and human body.

Core Species Derived from Multispecies Interactions Facilitate the Immobilization of Cadmium

Microbial consortia have opened new avenues for heavy-metal remediation. However, the limited understanding of the overall effect of interspecific interactions on remediation efficacy hinders its application. Here, the effects of multispecies growth and biofilm formation on Cd immobilization were explored from direct and multiple interactions through random combinations of two or three rhizosphere bacteria. In monocultures, Cd stress resulted in an average decrease in planktonic biomass of 26%, but through cooperation, the decrease was attenuated in dual (21%) and triple cultures (13%), possibly involving an increase in surface polysaccharides. More than 65% of the co-cultures exhibited induction of biofilm formation under Cd stress, which further enhanced the role of biofilms in Cd immobilization. Notably, excellent biofilm-forming ability or extensive social induction makes Pseudomonas putida and Brevundimonas diminuta stand out in multispecies biofilm formation and Cd immobilization. These two core species significantly increase the colonization of soil microorganisms on rice roots compared to the control, resulting in a 40% decrease in Cd uptake by rice. Our study enhances the understanding of bacterial interactions under Cd stress and provides a novel strategy for adjusting beneficial soil consortia for heavy-metal remediation.

Investigation of cadmium and nickel biosorption by Pseudomonas sp. via response surface methodology

The environmental contamination of heavy metals has grown over the last several decades along with global industrialization and now constitutes a serious threat to human health. In this research, high cadmium (Cd) and nickel (Ni) resistant bacteria that were chosen for heavy metal biosorption were isolated from the Industries Factory in Sari, Mazandaran, Iran. Pseudomonas aeruginosa was recognized as the isolated bacterium based on its morphological, physiological, biochemical, antibiotic resistance testing, and 16S rRNA sequences. The bacteria had the highest concentrations of resistance to Cd (up to 1600 ppm) and Ni, according to the Minimum Inhibition Concentration (MIC) test (up to 2000 ppm). Single-factor studies in single and binary systems were used to examine the effects of temperature, contact duration, pH value, starting Cd and Ni concentration, and biomass dose on the Cd and Ni adsorption by P. aeruginosa. The Cd and Ni biosorption in binary solutions was optimized using the response surface methodology (RSM) based on Central Composite Design (CCD). The investigation revealed that at pH 7.0, 45 °C, and 1.5 gL^-1 biomass dose, the greatest biosorption efficiency for Cd and Ni was 92.43 percent and 88.45 percent, respectively. According to the adsorption of Cd and Ni in urban water, under these similarly extreme conditions, Cd adsorption drops to 54% and Ni to 60%. Analysis Potential functional groups involving interactions between cells and metal ions were identified using Fourier transform infrared spectroscopy (FTIR). Different compounds and heavy metal ions were found to have been adsorbed to the surface of the biosorbent by scanning electron microscopy and energy-dispersive X-ray spectroscopy (SEM/EDS). It was determined that P. aeruginosa had a high rate of Cd and Ni adsorption and that variations in pH level had a greater impact than other parameters. The findings imply that P. aeruginosa biomass may be an effective, economical, and environmentally friendly method for removing Cd and Ni from contaminated settings. It also has a reasonable capacity for biosorption in both a natural environment and a laboratory environment.

Process parameters and biological mechanism of efficient removal of Cd(II) ion from wastewater by a novel Bacillus subtilis TR1

The safe treatment of heavy metals in wastewater is directly related to the human health and social development. In this paper, a new biological strain has been isolated from electroplating wastewater, which can effectively remove metal ions in wastewater. The results of 16 S rDNA sequencing analysis and NCBI GenBank database comparison show that the strain belongs to a novel Bacillus genus and names Bacillus subtilis TR1 with the accession number of OL441606. The removal rate of Cd(II) reaches to 85.68% with the conditions of pH = 7, C_0Cd(II) = 20 mg L^-1, t = 48 h, m = 0.1 g, and T = 35 °C. The biological removal mechanism of Cd(II) is in-depth studied by FTIR and XRD combined with third-generation sequencing. The results indicate that Bacillus subtilis TR1 removes Cd(II) mainly through two synergistic pathways, namely, extracellular chemisorption and intracellular bioaccumulation: 1) The groups carried on the surface of the strain, such as -COOH, -NH, -OH and C-H, have good chemisorption properties for Cd(II) and easily form cadmium containing chelation (-COO-Cd(II), -N-Cd(II), etc.) with these groups. The appearance of TR1 strain changes from cylindrical to spherical after Cd(II) adsorption, which is due to the biotoxicity of Cd(II); 2) Cd(II) exchanges on the surface of TR1 strain with K and Na ions released from the intracellular cytoplasm and enters the cytoplasm under the transfer of biological transport medium. This part of Cd(II) is converted into its own components by anabolic enzymes and accumulates in the cytoplasm. These data provide a new biological agent for the efficient treatment of heavy metal ions in wastewater and enrich relevant theoretical knowledge.

One-Pot Tandem Alcoholysis-Hydrogenation of Polylactic Acid to 1,2-Propanediol

The chemical recycling of end-of-life polylactic acid (PLA) plays roles in mitigating environmental pressure and developing circular economy. In this regard, one-pot tandem alcoholysis and hydrogenation of PLA was carried out to produce 1,2-propanediol, which is a bulk chemical in polymer chemistry. In more detail, the commercially available Raney Co was employed as the catalyst, and transformation was conducted in ethanol, which acted as nucleophilic reagent and solvent. Single-factor analysis and Box-Behnken design were used to optimize the reaction conditions. Under the optimized condition, three kinds of PLA materials were subjected to degradation. Additionally, 74.8 ± 5.5%, 76.5 ± 6.2%, and 71.4 ± 5.7% of 1,2-propanediol was yielded from PLA powder, particle, and straws, respectively, which provided a recycle protocol to convert polylactic acid waste into value-added chemicals.

Adsorption Study of Continuous Heavy Metal Ions (Pb2+, Cd2+, Ni2+) Removal Using Cocoa (Theobroma cacao L.) Pod Husks

The serious toxicological effects of heavy metal ions in aquatic ecosystems have motivated the search for alternatives to reduce contamination of water sources from industrial wastewater. In this work, continuous adsorption of nickel, cadmium, and lead was assessed using a packed bed column filled with Cocoa (Theobroma cacao L.) pod husks widely available in the northern region of Colombia. The physicochemical characterization of the agricultural biomass was performed to quantify its chemical composition by bromatological, FT-IR, and energy-dispersive X-ray spectroscopy (EDS). The breakthrough curves were constructed for all heavy metal ions with bed depth of 4 and 7.5 cm, taking aliquots at 10, 30, 60, 90, 120, 150, 180, 210, 240, and 270 min. Moreover, experimental data were fitted to adsorption models in continuous mode to predict adsorptive performance (Adams−Bohart, Thomas, and Yoon−Nelson). For the FT-IR analysis of biomass before and after adsorption, the most representative bands occur around 3200−3900 cm−1 attributed to the presence of hydroxyl groups, showing the destruction of the peaks of lignocellulosic materials. The breakthrough curves revealed that for a 7.5 cm bed, adsorption performance reported the following order of promising results: Pb2+ > Ni2+ > Cd2+; while for a 4 cm bed, Pb2+ > Ni2+. The mechanism of adsorption of the evaluated metals onto cocoa pod husk was attributed to cationic exchange and microprecipitation due to the presence of Ca, K, and Si in the structure of the bio-adsorbent. Finally, the continuous adsorption was modeled under the mathematical expressions of Adams−Bohart, Thomas, and Yoon−Nelson reporting good fitting with correlation coefficient above 0.95.

Investigation into Biosorption of Pharmaceuticals from Aqueous Solutions by Biocomposite Material Based on Microbial Biomass and Natural Polymer: Process Variables Optimization and Kinetic Studies

Biosorbtive removal of the antibacterial drug, ethacridine lactate (EL), from aqueous solutions was investigated using as biosorbent Saccharomyces pastorianus residual biomass immobilized in calcium alginate. The aim of this work was to optimize the biosorption process and to evaluate the biosorption capacity in the batch system. Response surface methodology, based on a Box–Behnken design, was used to optimize the EL biosorption parameters. Two response functions (removal efficiency and biosorption capacity) were maximized dependent on three factors: initial concentration of EL solution, contact time, and agitation speed. The highest values for the studied functions (89.49%, 26.04 mg/g) were obtained in the following operational conditions: EL initial concentration: 59.73 mg/L; contact time: 94.26 min; agitation speed: 297.57 rpm. A number of nonlinear kinetic models, including pseudo-first-order, pseudo-second-order, Elovich, and Avrami, were utilized to validate the biosorption kinetic behavior of EL in the optimized conditions. The kinetic data fitted the pseudo-first-order and Avrami models. The experimental results demonstrated that the optimized parameters (especially the agitation speed) significantly affect biosorption and should be considered important in such studies.

Phytoremediation of Cadmium Contaminated Soil Using Sesbania sesban L. in Association with Bacillus anthracis PM21: A Biochemical Analysis

Sustainable food production to feed nine to 10 billion people by 2050 is one of the greatest challenges we face in the 21st century. Due to anthropogenic activities, cadmium (Cd) contamination is ubiquitous with deleterious effects on plant and soil microbiota. In the current study, the phytoremediation potential of Sesbania sesban L. was investigated in Cd-spiked soil inoculated with Bacillus anthracis PM21. The Cd-spiked soil drastically reduced important plant attributes; however, inoculation of B. anthracis PM21 significantly (p ≤ 0.05) enhanced root length (17.21%), shoot length (15.35%), fresh weight (37.02%), dry weight (28.37%), chlorophyll a (52.79%), chlorophyll b (48.38%), and total chlorophyll contents (17.65%) at the Cd stress level of 200 mg/kg as compared to the respective control. In addition, bacterial inoculation improved superoxide dismutase (11.98%), peroxidase (12.16%), catalase (25.26%), and relative water content (16.66%) whereas it reduced proline content (16.37%), malondialdehyde content (12.67%), and electrolyte leakage (12.5%). Inoculated plants showed significantly (p ≤ 0.05) higher Cd concentration in the S. sesban root (118.6 mg/kg) and shoot (73.4 mg/kg) with a translocation (0.61) and bioconcentration factor (0.36), at 200 mg/kg Cd. Surface characterization of bacteria through Fourier transform infrared spectroscopy (FTIR) and scanning electron microscopy (SEM) predicted the involvement of various functional groups and cell surface morphology in the adsorption of Cd ions. Amplification of the CzcD gene in strain PM21, improved antioxidant activities, and the membrane stability of inoculated S. sesban plants conferred Cd tolerance of strain PM21. In addition, the evaluated bacterial strain B. anthracis PM21 revealed significant plant growth-promoting potential in S. sesban; thus, it can be an effective candidate for phyto-remediation of Cd-polluted soil.

Optimization of media composition for enhancing tetracycline degradation by Trichosporon mycotoxinivorans XPY-10 using response surface methodology

The objective of the study was to improve tetracycline degradation efficiency by Trichosporon mycotoxinivorans XPY-10 using statistical experimental designs. Different culture conditions (FeSO₄, pH and glucose) were optimized for tetracycline biodegradation and the mutual interactions between these three variables were analysed using Box-Behnken design (BBD) and response surface methodology (RSM). The results showed that the empirical model was suitable for experimental data, and the maximum tetracycline degradation efficiency by XPY-10 was 95.18% under the optimum conditions of 0.02% of FeSO₄, pH 7.83 and 0.28% of glucose, which was further verified by experiments. This study indicated the excellent ability of XPY-10 in degrading tetracycline and theoretical support for the follow-up practice to remediate tetracycline contaminated environment.

Batch and Packed Bed Column Study for the Removal of Cr (VI) and Ni (II) Using Agro-Industrial Wastes

The objective of this study was to prepare bio adsorbents from agro-industrial wastes from yam starch (YSR) and plantain (PSR) production for its use in the removal of Cr (VI) and Ni (II) in aqueous solution in batch and continuous packed-bed column systems. Bromatological analysis showed that the biomaterials are rich in cellulose, lignin, hemicellulose, and SEM micrographs that evidence a mesoporous structure characteristic of materials of lignocellulosic origin. FTIR evidenced functional groups such as hydroxyl, carbonyl, and methyl, possibly involved in the uptake of metal ions. EDS and FTIR analysis after adsorption confirmed that the retention of the metals on the surface of the adsorbent materials was successful. Cr (VI) and Ni (II) removal efficiencies above 80% were achieved using YSR and PSR in batch systems at the different conditions evaluated. The optimum conditions for removing Ni (II) on PSR were a bed height of 11.4 cm and a temperature of 33 °C, while for YSR, they were: 43 °C and 9 cm for temperature and bed height respectively. The variable with the most significant influence on the removal of Cr (VI) in a batch system on the two bio adsorbents was temperature. In contrast, the adsorbent dose and temperature are relevant factors for PSR Ni (II) removal. Therefore, the residues from the preparation of yam and plantain starch have high potential for removing heavy metals from wastewater and are presented as an alternative for their final disposal.

Adsorption behavior and mechanism of Serratia marcescens for Eu(III) in rare earth wastewater

Directly discharging low-concentration rare-earth wastewater not only wastes rare-earth resources but also pollutes the environment. In this study, the biosorption behavior of Serratia marcescens for Eu(III) was studied with emphasis on the optimization of adsorption conditions, adsorption kinetics, and adsorption isotherm. It was shown that the maximum adsorption capacity of Serratia marcescens reached 115.36 mg·g^-1 under an optimal condition, indicating the good adsorption capability of Serratia marcescens for Eu(III). The adsorption kinetics and adsorption isotherm analysis showed that the adsorption process conforms to the pseudo-second-order kinetic model and Langmuir adsorption isotherm, indicating that the adsorption of Eu(III) by Serratia marcescens is a monolayer chemical adsorption process. In addition, the adsorption mechanism was investigated by using characterizations of zeta potential, scanning electron microscope-energy dispersive spectrometer (SEM-EDS), Fourier transform infrared (FT-IR), and X-ray photoelectron spectroscopy (XPS) analyses. It was revealed that the adsorption of Eu(III) by S. marcescens is a combination of electrostatic attraction, ions exchange and coordination. These findings indicate that S. marcescens can be used as a potential biosorbent to recover rare earth elements from rare earth wastewater.

Restoration of heavy metal-contaminated soil and water through biosorbents: A review of current understanding and future challenges

Heavy metal pollution in soil and water is a potential threat to human health as it renders food quality substandard. Different biosorbents such as microbial and agricultural biomass have been exploited for heavy metal immobilization in soil and sorptive removal in waters. Biosorption is an effective and sustainable method for heavy metal removal in soil and water, but the inherent challenges are to find cheap, selective, robust, and cost-effective bioadsorbents. Microbial and agricultural biomass and their modified forms such as nanocomposites and carbonaceous materials (viz., biochar, nanobiochar, biocarbon), might be useful for sequestration of heavy metals in soil via adsorption, ion exchange, complexation, precipitation, and enzymatic transformation mechanisms. In this review, potential biosorbents and their metal removal capacity in soil and water are discussed. The microbial adsorbents and modified composites of agricultural biomasses show improved performance, stability, reusability, and effectively immobilize heavy metals from soil and water. In the future, researchers may consider the modified composites, encapsulated biosorbents for soil and water remediation.

Laboratory and simulation study on the Cd(Ⅱ) adsorption by lake sediment: Mechanism and influencing factors

Sediments are the major sinks for Cd(Ⅱ) in the aquatic environment. Here, the detailed binding mechanisms and effects of environmental factors on Cd(Ⅱ) adsorption onto lake sediment were tested by a batch of adsorption and characteristic experiments. Sediment samples and sediment-Cd complexes were characterized using Scanning electron microscopy, Energy dispersive spectroscopy, X-ray photoelectron spectroscopy, Fourier transform infrared spectroscopy, and X-ray diffraction spectral analyses. The interactive and main effect of parameters such as pH, flow velocity, Cd(II) concentration, sediment particle size, humic acid, fulvic acid and adsorption time involved in the adsorption process were determined using two models based on response surface methodology (RSM) and a back-propagation neural network with genetic algorithm (GABP). Results showed that Cd(II) adsorption onto sediment was mainly achieved through surface complexation with O-containing groups and precipitation with carbonate and sulfide. RSM was favorable for modeling Cd(II) adsorption in lake systems because it intuitively reflected the influence of the factors and had a good fitting precision (R² = 0.8838, RSME = 2.5496) close to that of the GABP model (R² = 0.8959, RSME = 2.5410). pH, sediment particle size, and humic acid exerted strong influences on Cd(II) immobilized by the sediment. Overall, our findings facilitate a better understanding of Cd(II) mobility in lakes and provide a reference for controlling heavy metals derived from both aqueous and sediment sources.

Performance of microbial induced carbonate precipitation for immobilizing Cd in water and soil

Microbial induced carbonate precipitation (MICP) is known as a significant process for remediating heavy metals contaminated environment. In this study, a novel Cd-resistant ureolytic bacteria was isolated and identified as Enterobacter sp. Its performances for immobilizing Cd in solution and soil were systematically discussed at different treatment conditions. Results showed that initial pH and Cd concentration were important parameters to influence Cd removal rate. The maximal Cd removal rate in solution reached 99.50 % within 7 days by MICP. The precipitation produced in Cd removal process were characterized by X-ray diffraction, scanning electron microscopy and energy dispersive spectrometer to understand the removal mechanism. Analyses showed that Cd removal mechanism of CJW-1 was predominately via biominerals including calcites and vaterites to absorb Cd²⁺. Cd immobilization tests demonstrated that the highest Cd-immobilization rate in soil could reach 56.10 %. Although all treatments contribute to soil pH, fertility, and enzyme activities improvement, oyster shell wastes (OS) had a better effect on soil cation exchange capacity. All treatments had negative effects on soil respiration and bacterial community, but OS can alleviate such adverse influence. Our results emphasized that Cd-resistant ureolytic bacteria strain CJW-1 combined with OS had excellent ability and reuse value to remediate Cd-contaminated environment.

Biosorption: A Review of the Latest Advances

Biosorption is a variant of sorption techniques in which the sorbent is a material of biological origin. This technique is considered to be low cost and environmentally friendly, and it can be used to remove pollutants from aqueous solutions. The objective of this review is to report on the most significant recent works and most recent advances that have occurred in the last couple of years (2019–2020) in the field of biosorption. Biosorption of metals and organic compounds (dyes, antibiotics and other emerging contaminants) is considered in this review. In addition, the use and possibilities of different forms of biomass (live or dead, modified or immobilized) are also considered.

Two plant growth promoting bacterial Bacillus strains possess different mechanisms in adsorption and resistance to cadmium

Microorganisms are promising biosorbents for decontaminating cadmium-polluted soil or water systems, but the underlying remediation mechanisms are still unclear. In this study, the cadmium biosorption mechanisms and capabilities of plant growth-promoting microorganisms (Bacillus megaterium NCT-2 and Bacillus paranthracis NT1) were investigated. Batch biosorption experiments showed that the optimal biosorption conditions for B. megaterium NCT-2 and B. paranthracis NT1 were pH 6.0, a biomass dosage of 1.0 g L^-1, and an initial Cd²⁺ concentration of 10 mg L^-1, and pH 8.0, a biomass dosage of 1.0 g L^-1, and an initial Cd²⁺ concentration of 10 mg L^-1, respectively. The biosorption processes of both biosorbents were well described by the pseudo-second order kinetic model, which indicated that the biosorption of Cd²⁺ was mainly chemisorption. The intracellular accumulation portion of adsorbed Cd²⁺ in B. megaterium NCT-2 was much higher than in B. paranthracis NT1 (43.11% and 3.25%, respectively), which resulted in the lower cadmium tolerance (14 mg L^-1 and 280 mg L^-1, respectively) and higher cadmium removal efficiency (46.79% and 20.45%, respectively) of B. megaterium NCT-2 compared to B. paranthracis NT1. SEM-EDS and FTIR analysis suggested the probable interactions of Cd²⁺ with the biosorbent surface ligands, such as -OH, -NH, -SO₃, CO and -COOH during surface adsorption. Results of qRT-PCR illustrated that the difference in cadmium resistant mechanism and adsorption performance between B. megaterium NCT-2 and B. paranthracis NT1 may be regulated by the genes cadA, zitB, khtT, and bshA and cadA, trkA, czcD, and bshA, respectively. Our results revealed that these two biosorbents have the potential for further use in the development of cadmium remediation technologies and could provide insight into the mechanisms of cadmium biosorption.

Application of waste cotton yarn as adsorbent of heavy metal ions from single and mixed solutions

In this study, waste cotton yarn was used for the removal of Pb (II), Cd (II), Cr (III), and As (V) from aqueous solution. Adsorption of heavy metal ions was tested from single ion solutions, while competitive studies were performed using two- and four-ion mixtures. In order to change the structure of the material, cotton yarn was modified by sodium hydroxide solution. The surface of raw and modified cotton yarn were characterized using scanning electron microscopy, Fourier transform infrared spectroscopy, and streaming potential method for determination of an isoelectric point. Sorption studies were performed on the basis of pH, kinetics, isotherms, and desorption results. It has been shown that waste cotton yarn modification, typically, does not improve the sorption capacity of the material and that the unmodified material could be used for the removal of examined heavy metal ions. Selectivity was in order Pb > Cd > Cr > As. Desorption studies have indicated to the possible reusability of the sorbent only in the case of Pb removal. A potential application of spent waste sorbent for the soil quality improvement has been considered.

Advances in application of cotton-based adsorbents for heavy metals trapping, surface modifications and future perspectives

Cotton-based adsorbents (CBAs) are promising materials for combating the problem of heavy metal pollution of environmental waters. This is ascribed to the low cost, abundance, biodegradability and efficiency of CBAs. Herein we review the adsorption of heavy metals (HMs) onto CBAs. We found that several surface modifications were employed to improve the efficiency of the CBAs. These modifications were effected via thermal, physical and chemical means to obtain activated carbons, biochars, ionic liquids, aerogels, hydrogels, chitosans and nanoparticle-derived CBAs. The CBAs exhibited maximum HMs uptake as low as 0.002 mg/g to as high as 505.6 mg/g. Although, the cotton-derived activated carbons and biochars exhibited enhanced HM uptake from that of the unmodified CBAs, they were less efficient than CBAs modified by other methods. Recent chemical, ionic liquid, chitosan and nano-derived CBAs were the most efficient, with high uptake and fast kinetic removal. However, the nanoparticle-based adsorbents are preferred to the chemically modified forms, due to the possibility of secondary pollution and the noxious effect of the latter to the environment. Findings showed that chemical treatment produced CBAs most efficient for As(V), Pb(II) and Fe(III), while ionic liquid CBA was more efficient for Cu(II) and Ni(II). Nano-based treatment was suitable for the uptake of Co(II), Zn(II), Pb(II) and Cd(II), while the chitosan based adsorbent was viable for Hg(II). Isotherm and kinetic evaluation of CBAs mostly conformed to the Langmuir and pseudo-second order models, respectively. Spontaneous adsorption of HMs onto CBAs was deduced from thermodynamic analysis, with endothermic and exothermic characteristics. Over 88% desorption of HMs was obtained from the CBAs studied with good average reusability from 3 to 20 cycles. We also discussed the directions for future research.

Optimization of Cadmium Adsorption by Magnetic Graphene Oxide Using a Fractional Factorial Design

Graphene materials have attracted increasing interest in water remediation. In this study, magnetic graphene oxide (MGO) was prepared through the modified Hummers method and the adsorption behaviors of cadmium were investigated. Firstly, the sorption kinetics, isotherms, as well as the effects of pH were investigated. Then, fractional factorial design (FFD) was used to optimize the effects of pH, temperature, time, initial concentration of cadmium ion and NaCl on cadmium adsorption. The results indicate that MGO could effectively remove cadmium ions from an aqueous solution and the sorption data could be described well by pseudo-second-order and Freundlich models, showing that the adsorption rate of cadmium ions on MGO is multilayer adsorption and dominated by the chemical adsorption. According to the FFD results, the maximum adsorption capacity of cadmium ions was 13.169 mg/g under the optimum condition of pH value 8, 45 °C, contact time 60 min, initial cadmium concentration of 70 mg/L and NaCl concentration of 100 mg/L. Higher levels of the pH value, temperature and initial cadmium concentration are beneficial to the adsorption process. These results are important for estimating and optimizing the removal of metal ions by MGO composite.

A High Manganese-Tolerant Pseudomonas sp. Strain Isolated from Metallurgical Waste Heap Can Be a Tool for Enhancing Manganese Removal from Contaminated Soil

Manganese (Mn) is widely used in industry. However, its extensive applications have generated a great amount of manganese waste, which has become an ecological problem and has led to a decrease in natural resources. The use of microorganisms capable of accumulating Mn ions from contaminated ecosystems offers a potential alternative for the removal and recovery of this metal. The main aim of this work was an investigation of removal potential of Mn from soil by isolated bacterial. For this purpose, eleven bacterial strains were isolated from the soil from metallurgical waste heap in Upper Silesia, Poland. Strain named 2De with the highest Mn removal potential was selected and characterized taking into account its ability for Mn sorption and bioaccumulation from soil and medium containing manganese dioxide. Moreover, the protein profile of 2De strain before and after exposition to Mn was analyzed using SDS/PAGE technique. The 2De strain was identified as a Pseudomonas sp. The results revealed that this strain has an ability to grow at high Mn concentration and possesses an enhanced ability to remove it from the solution enriched with the soil or manganese dioxide via a biosorption mechanism. Moreover, changes in cellular protein expression of the isolated strain were observed. This study demonstrated that autochthonous 2De strain can be an effective tool to remove and recover Mn from contaminated soil.

Comprehensive depiction of novel heavy metal tolerant and EPS producing bioluminescent Vibrio alginolyticus PBR1 and V. rotiferianus PBL1 confined from marine organisms

The current study depicts the isolation of luminescent bacteria from fish and squid samples that were collected from Veraval fish harbour. From Indian mackerel, total 14 and from squid, total 23 bioluminescent bacteria were isolated using luminescence agar medium. Two bioluminescent bacteria with highest relative luminescence intensity PBR1 and PBL1 were selected. These two isolates were subjected to detailed biochemical characterization and were tested positive for 5 out of 13 biochemical tests. Furthermore, both PBR1 and PBL1 were able to ferment cellobiose, dextrose, fructose, galactose, maltose, mannose, sucrose and trehalose with acid production. Based on 16S rRNA partial gene sequence analysis, PBR1 was identified as Vibrio alginolyticus and PBL1 as V. rotiferianus. Antibiotic susceptibility test using paper-disc method showed that PBR1 and PBL1 were sensitive to chloramphenicol, ciprofloxacin, co-trimoxazole, gatifloxacin, levofloxacin, linezolid ad roxithromycin out of 18 antibiotics tested. Moreover, both strains were evaluated for their exopolysachharide (EPS) producing ability where PBR1 and PBL1 were able to yield 1.34 g% (w/v) and 2.45 g% (w/v) EPS respectively from 5 g% (v/v) sucrose concentration. Heavy metal toxicity assessment was carried out using agar well diffusion method with eight heavy metals and both the strains were sensitive to As(III), Cd(II), Ce(II), Cr(III), Cu(II), Hg(II) and while they showed resistance to Pb(II) and Sr(II). Based on these results, a study was conducted to demonstrate bio-removal of Pb and Sr by EPS of PBR1 and PBL1. Fourier transform infrared (FTIR) spectra revealed the functional groups of EPS involved in interaction with the heavy metals. Owing to the sensitivity for the remaining heavy metals, these bioluminescent bacteria can be used further for the development of luminescence-based biosensor.

Heavy metal ions removed from imitating acid mine drainages with a thermoacidophilic archaea: Acidianus manzaensis YN25

Metals in acid mine drainages (AMD) have posed a great threat to environment, and in situ economic environment-friendly remediation technologies need to be developed. Moreover, the effects of acidophiles on biosorption and migrating behaviors of metals in AMD have not been previously reported. In this study, the extremely thermoacidophilic Archaea, Acidianus manzaensis YN25 (A. manzaensis YN25) was used as a bio-adsorbent to adsorb metals (Cu²⁺, Ni²⁺, Cd²⁺ and Zn²⁺) from acidic solutions which were taken to imitate AMD. The values of their maximum biosorption capacities at both high (1 mM) and low (0.1 mM) metal concentrations followed the order: Cu²⁺ > Ni²⁺ > Cd²⁺ > Zn²⁺. With the elevations of temperature and pH value, the adsorption amounts of metals increased. The results also indicated that A. manzaensis YN25 had the highest adsorption affinity to Cu²⁺ in coexisting system of quaternary metals. Acid-base titration data revealed that carboxyl and phosphoryl groups provided adsorption sites for metals via deprotonation. Fourier transform infrared spectroscopy (FTIR) and X-ray photoelectron spectroscopy (XPS) further corroborated that amino played an important role in the biosorption process. The fitted Langmuir model illustrated monolayer adsorption occurring on cell surface. The possible adsorption mechanism of A. manzaensis YN25 mainly involved in electrostatic attraction and complexes formation. This study gives a profound insight into the biosorption behavior of heavy metals in acidic solution by thermoacidophilic Archaea and provides a probable novel strategy for in situ remediation of heavy metals pollution in AMD.

Insights into the production of extracellular polymeric substances of Cupriavidus pauculus 1490 under the stimulation of heavy metal ions

Three different methods (a sulfuric acid method, sodium chloride method and vibration method) were used to extract extracellular polymeric substances (EPS) from Cupriavidus pauculus 1490 (C. pauculus 1490) in the present study. The sodium chloride method was able to extract the maximum amount of EPS (86.15 ± 1.50 mg g⁻¹-DW), and could ensure minimum cell lysis by detecting glucose-6-phosphate dehydrogenase activity and using scanning electron microscopy. This method was therefore selected as the optimal extraction method and used in subsequent experiments. On this basis, the tolerance of C. pauculus 1490 and variations in EPS secretion after the addition of different metal ions was investigated. The tolerance levels of C. pauculus 1490 to Cd(ii), Ni(ii), Cu(ii) and Co(ii) were 300 mg L⁻¹, 400 mg L⁻¹, 400 mg L⁻¹ and 400 mg L⁻¹, respectively. Low concentrations of these heavy metal ions could promote bacterial growth, while increased concentrations were found to inhibit it. The results show that metal ions, especially Cd(ii), stimulate the secretion of EPS, with an EPS yield reaching 956.12 ± 10.59 mg g⁻¹-DW at 100 mg L⁻¹. Real-time polymerase chain reaction (PCR) analysis showed that the key EPS synthetic genes, epsB, epsP and Wzz, were up-regulated. Fourier transform infrared spectroscopy analysis suggested that abundant functional groups in EPS play an important role in heavy metal ion complexation. These results will contribute to our understanding of the tolerance mechanism of microorganisms in the presence of different types and concentrations of metal ions.

Metal ions are shown to stimulate the secretion of EPS components of Cupriavidus pauculus 1490, especially Cd(II).

Optimisation and Modelling of Pb (II) and Cu (II) Biosorption onto Red Algae (Gracilaria changii) by Using Response Surface Methodology

The removal of Pb (II) and Cu (II) ions by using marine red macroalgae (Gracilaria changii) as a biosorbent material was evaluated through the batch equilibrium technique. The effect of solution pH on the removal of metal ions was investigated within the range of 2–7. The response surface methodology (RSM) technique involving central composite design (CCD) was utilised to optimise the three main sorption parameters, namely initial metal ion concentration, contact time, and biosorbent dosage, to achieve maximum ion removal. The models’ adequacy of response was verified by ANOVA. The optimum conditions for removal of Pb (II) and Cu (II) were as follows: pH values of 4.5 and 5, initial concentrations of 40 mg/L, contact times of 115 and 45 min, and biosorbent dosage of 1 g/L, at which the maximum removal percentages were 96.3% and 44.77%, respectively. The results of the adsorption isotherm study showed that the data fitted well with the Langmuir’s model for Pb (II) and Cu (II). The results of the adsorption kinetic study showed that the data fitted well with the pseudo-second order model for Pb (II) and Cu (II). In conclusion, red alga biomass exhibits great potential as an efficient low-cost sorbent for removal of metal ions.

Adhesion abilities and biosorption of Cd and Mg by microorganisms - first step for eco-friendly beneficiation of phosphate ore

Chemical reagents used in traditional mineral processing can be toxic and hazardous for the environment. Therefore, the use of biotechnological methods is becoming increasingly important. Great hopes are being placed in the use of microorganisms for bio-beneficiation of raw materials. However, assessment of adhesion abilities of bacteria onto minerals surface as well as biosorption of metals are essential steps before designing final process of each ore beneficiation. The main aim of this work was an investigation of biosorption of Cd and Mg, as well as adhesion abilities of five microorganism species with minerals included in the natural mixture of phosphate ore form Djebel Onk, Algeria. The ore, due to its unique composition, created conditions for adhesion of all five tested microbial strains onto apatite surface during incubation at pH 3. Moreover, Rhodococcus erythropolis CD 130, Pseudomonas fluorescens and Escherichia coli adhered distinctly onto apatite surface during incubation at pH 7. Incubation lasting 20 min at pH 4-6 created the most favorable conditions for biosorption of metals by B. subtilis and adhesion of cells. In case of C. albicans, biosorption of metals as well as adhesion of cells onto the mineral surface were more effective after longer time and in a wider pH range.