Preparation of UiO-66-NH2 and UiO-66-NH2/sponge for adsorption of 2,4-dichlorophenoxyacetic acid in water

Influence of light-emitting diodes (LEDs) on the 2,4-diclorophenoxyacetic acid phytoremediation by plectranthus neochilus

2,4-Dichlorophenoxyacetic acid (2,4-D) is an herbicide widely used in crops against broadleaf weeds. However, 2,4-D residues are considered an environmental pollutant in bodies of water. Phytoremediation with Plectranthus neochilus is a substantial strategy to remove 2,4-D from the aquatic environment. The objective of this study was to verify the efficiency of the association of the photostimulus by Light Emitting Diodes (LED) with P. neochilus to improve phytoremediation of 2,4-D in water. Phytoremediation was evaluated with the following samples: natural light, white LED, blue LED, and red LED, with and without the plant as controls. The data corresponding to the validation of the method were in accordance with the required parameters: R2: 0.9926; RSD: 1.74%; LOD: 0.075 mg.L-1; LOQ: 0.227 mg.L-1 and recovery by SPE was 76.57%. The efficiency of the association of LED with P. neochilus in the 28 days was: ambient light + plant (47.0%); white light + plant (37.10%); blue light + plant (26.80%); red light + plant (3.32%). This study demonstrated, for the first time, the efficiency of using LEDs light in association with P. neochilus for the phytoremediation of 2,4-D in water.

Synthesis of magnetic Fe3O4/graphene aerogel for the removal of 2,4-dichlorophenoxyacetic acid herbicide from water

Graphene-based aerogels are among the lightest materials in the world and have been extensively studied for environmental remediation. In this work, an Fe3O4/graphene aerogel material was synthesized using the co-precipitation method. The prepared material was characterized using X-ray diffraction (XRD), scanning electron microscopy/X-ray energy dispersive spectroscopy (FESEM/EDX), infrared spectroscopy (FT-IR), and vibration sample magnetization (VSM). The results showed that the Fe3O4 nanoparticles with a particle size of less than 100 nm were well-distributed on the surface of the graphene aerogel. The prepared Fe3O4/graphene aerogel showed effective removal of 2,4-D herbicide from the aqueous solution with a maximal adsorption capacity of approximately 42.918 mg g-1. The adsorption isotherms and kinetics were investigated to study the adsorption behaviour of the resultant material. The saturation magnetism value of the aerogel was determined to be about 20.66 emu g-1, indicating that the adsorbent could be easily collected from the solution using an external magnet. These results implied that the prepared Fe3O4/graphene aerogel could be a promising adsorbent for the removal of 2,4-D herbicide from water.

Bifunctional fluorescent molecularly imprinted resin based on carbon dot for selective detection and enrichment of 2,4-dichlorophenoxyacetic acid in lettuce

The work provided a method for synthesizing a simple fluorescent molecularly imprinted polymer by surface-initiated atom transfer radical polymerization (SI-ATRP) and its application in real sample. Poly(glycidyl methacrylate-co-ethylene glycol dimethacrylate) microspheres were selected as a matrix, 4-vinylpyridine, ethylene glycol dimethacrylate, 2,4-dichlorophenoxyacetic acid (2,4-D) as functional monomer, cross-linker and template molecule, respectively, to fabricate MAR@MIP with core-shell structure. For comparison, carbon dot (CD) as a fluorescence source was synthesized with o-phenylenediamine and tryptophan as precursors via hydrothermal method and integrated into MIP to acquire MAR@CD-MIP. MAR@CD-NIP was also prepared without adding the template molecule. The adsorption capacity of MAR@CD-MIP reached 104 mg g-1 for 2,4-D, which was higher than that of MAR@MIP (60 mg g-1). However, the adsorption capacity of MAR@CD-NIP was only 13.2 mg g-1. The linear range of fluorescence detection for 2,4-D was 18-72 μmol/L, and the limit of detection (LOD) was 0.35 μmol/L. The fluorescent MAR@CD-MIP was successfully applied in enrichment of lettuce samples. The recoveries of the three spiked concentrations of 2,4-D in lettuce were tested by fluorescence spectrophotometry and ranged in 97.3-101.7 %. Meanwhile, the results were also verified by HPLC. As a result, bi-functional molecularly imprinted resin was successfully fabricated to detect and enrich 2,4-D in real samples, and exhibited good selectivity, sensitivity and great application prospect in food detection.

Efficient Adsorption and Removal of the Herbicide 2,4-Dichlorophenylacetic Acid from Aqueous Solutions Using MIL-88(Fe)-NH2

Metal-organic frameworks (MOFs), a material known for its multifunctionality, chemical stability, and high surface area, are now commonly utilized as an adsorbent for water treatment. The MOF (MIL-88(Fe)-NH2) was synthesized and used to remove the commonly used toxic herbicide 2,4-dichlorophenoxyacetic acid (2,4-D) from water. The MIL-88(Fe)-NH2 MOF was fully characterized using multiple techniques. A systematic investigation was conducted to evaluate the key parameters that impact the adsorption process, which include coexisting anions, adsorbent dosage, and solution pH. The adsorption isotherm was fitted using the Langmuir model, while the kinetics were fitted using pseudo-second-order. The adsorption process was both chemisorption and endothermic. The capacity for adsorption increased with rising temperatures. The MIL-88(Fe)-NH2 adsorbent has a maximum adsorption capacity of 345.25 mg g-1 for removing 2,4-D, significantly higher than previous adsorbents used for this purpose. The adsorption mechanism could be ascribed to hydrogen bonding, pore filling, π-π conjugations between the 2,4-D molecules and the MIL-88(Fe)-NH2 adsorbent, and electrostatic interactions. Furthermore, the adsorption capacity of MIL-88(Fe)-NH2 adsorbent showed only a slight decrease after five successive recycles, and it could be easily regenerated through solvent washing. When used in environmental water samples, especially those containing electronic wastes, the MIL-88(Fe)-NH2 adsorbent demonstrated satisfactory adsorption capacity and reusability. The MIL-88(Fe)-NH2 adsorbent is more practical and reusable and has better adsorption capacity and shorter equilibrium time compared to previously reported adsorbents.

Adsorption of 2,4-dichlorophenoxyacetic acid and glyphosate from water by Fe3O4-UiO-66-NH2 obtained in a simple green way

In this study, a green adsorbent (Fe₃O₄-UiO-66-NH₂) with the ability of addressing the issues of separation and recovery of UiO-66-NH₂ is obtained using a simple co-precipitation method under environmentally benign conditions. Various characterization techniques are utilized for evaluating the properties of the developed adsorbent. The capability of Fe₃O₄-UiO-66-NH₂ towards 2,4-dichlorophenoxyacetic acid (2,4-D) and glyphosate (GP) from solution is explored. The results revealed that the magnetization process did not destroy the crystal structure of UiO-66-NH₂, which ensured that Fe₃O₄-UiO-66-NH₂ had good adsorption performance for 2,4-D and GP. The adsorption processes showed a wide pH application range, high salt tolerance, and regeneration performance as well as an excellent adsorption rate. Results from thermodynamic study showed that both processes were spontaneous and endothermic. The unit uptake ability of Fe₃O₄-UiO-66-NH₂ for 2,4-D and GP reached up to 249 mg·g^-1 and 183 mg·g^-1 from Langmuir model at 303 K, respectively. When solid-liquid ratio was 2 g·L^-1, Fe₃O₄-UiO-66-NH₂ can reduce the content of 2,4-D or GP with the initial density of 100 mg·L^-1 below the drinking water requirement limit. In addition, the reusability efficiency of Fe₃O₄-UiO-66-NH₂ towards 2,4-D and GP was found to be 86% and 80% using 5 mmol·L^-1 NaOH as eluent. Analysis of simulated water samples indicated that Fe₃O₄-UiO-66-NH₂ could achieve the single or simultaneous removal of 2,4-D and GP from wastewater. Summarily, Fe₃O₄-UiO-66-NH₂ as a green adsorbent can serve as an alternative for removing 2,4-D and GP from water body.

Metal-Organic Frameworks as Potential Agents for Extraction and Delivery of Pesticides and Agrochemicals

Pesticide contamination is a global issue, affecting nearly 44% of the global farming population, and disproportionately affecting farmers and agricultural workers in developing countries. Despite this, global pesticide usage is on the rise, with the growing demand of global food production with increasing population. Different types of porous materials, such as carbon and zeolites, have been explored for the remediation of pesticides from the environment. However, there are some limitations with these materials, especially due to lack of functional groups and relatively modest surface areas. In this regard, metal-organic frameworks (MOFs) provide us with a better alternative to conventionally used porous materials due to their versatile and highly porous structure. Recently, a number of MOFs have been studied for the extraction of pesticides from the environment as well as for targeted and controlled release of agrochemicals. Different types of pesticides and conditions have been investigated, and MOFs have proved their potential in agricultural applications. In this review, the latest studies on delivery and extraction of pesticides using MOFs are systematically reviewed, along with some recent studies on greener ways of pest control through the slow release of chemical compounds from MOF composites. Finally, we present our insights into the key issues concerning the development and translational applications of using MOFs for targeted delivery and pesticide control.

Adsorption of 2,4-dichlorophenoxyacetic acid by UiO-66-NH2 obtained in a green way

In this study, a zirconium elemental organic framework (UiO-66-NH₂) was prepared by a green synthesis method and showed a good adsorption performance for removing 2,4-dichlorophenoxyacetic acid (2,4-D) from water. UiO-66-NH₂ was analyzed by a variety of characterization methods and the adsorption properties of 2,4-D on UiO-66-NH₂ were investigated by static adsorption experiments. The results showed that the adsorption of 2,4-D had a wide pH range (2-10) and good salt tolerance with the adsorption equilibrium time about 2 h. The maximum adsorption capacity from Langmuir was up to 652 mg g^-1 at 303 K. The isotherms can be described by Langmuir model and the adsorption kinetics was consistent with pseudo-second-order kinetic model and Elovich model. The regeneration efficiency was still 95% after 5 cycles with 0.01 mol L^-1 NaOH as desorption solution. The feasibility of practical application of UiO-66-NH₂ was explored by simulating actual wastewater at different pH. UiO-66-NH₂ is promising to remove 2,4-D from water.

Development of Antifouling Thin-Film Composite/Nanocomposite Membranes for Removal of Phosphate and Malachite Green Dye

Nowadays polymer-based thin film nanocomposite (TFN) membrane technologies are showing key interest to improve the separation properties. TFN membranes are well known in diverse fields but developing highly improved TFN membranes for the removal of low concentration solutions is the main challenge for the researchers. Application of functional nanomaterials, incorporated in TFN membranes provides better performance as permeance and selectivity. The polymer membrane-based separation process plays an important role in the chemical industry for the isolation of products and recovery of different important types of reactants. Due to the reduction in investment, less operating costs and safety issues membrane methods are mainly used for the separation process. Membranes do good separation of dyes and ions, yet their separation efficiency is challenged when the impurity is in low concentration. Herewith, we have developed, UiO-66-NH₂ incorporated TFN membranes through interfacial polymerization between piperazine (PIP) and trimesoyl chloride (TMC) for separating malachite green dye and phosphate from water in their low concentration. A comparative study between thin-film composite (TFC) and TFN has been carried out to comprehend the benefit of loading nanoparticles. To provide mechanical strength to the polyamide layer ultra-porous polysulfone support was made through phase inversion. As a result, outstanding separation values of malachite green (MG) 91.90 ± 3% rejection with 13.32 ± 0.6 Lm^-2h^-1 flux and phosphate 78.36 ± 3% rejection with 22.22 ± 1.1 Lm^-2h^-1 flux by TFN membrane were obtained. The antifouling tendency of the membranes was examined by using bovine serum albumin (BSA)-mixed feed and deionized water, the study showed a good ~84% antifouling tendency of TFN membrane with a small ~14% irreversible fouling. Membrane's antibacterial test against E. coli. and S. aureus. also revealed that the TFN membrane possesses antibacterial activity as well. We believe that the present work is an approach to obtaining good results from the membranes under tricky conditions.

Zirconium-Based MOFs and Their Biodegradable Polymer Composites for Controlled and Sustainable Delivery of Herbicides

Adsorption and controlled release of agrochemicals has been studied widely using different nanomaterials and a variety of formulations. However, the potential for application of high surface-area metal–organic frameworks (MOFs) for the controlled release of agrochemicals has not been thoroughly explored. Herein, we report controlled and sustainable release of a widely used herbicide (2-methyl-4-chlorophenoxyacetic acid, MCPA) via incorporation in a range of zirconium-based MOFs and their biodegradable polymer composites. Three Zr-based MOFs, viz., UiO-66, UiO-66-NH₂, and UiO-67 were loaded with MCPA either postsynthetically or in situ during synthesis of the MOFs. The MCPA-loaded MOFs were then incorporated into a biodegradable polycaprolactone (PCL) composite membrane. All three MOFs and their PCL composites were thoroughly characterized using FT-IR, TGA, SEM, PXRD, BET, and mass spectrometry. Release of MCPA from each of these MOFs and their PCL composites was then studied in both distilled water and in ethanol for up to 72 h using HPLC. The best performance for MCPA release was observed for the postsynthetically loaded MOFs, with PS-MCPA@UiO-66-NH₂ showing the highest MCPA concentrations in ethanol and water of 0.056 and 0.037 mg/mL, respectively. Enhanced release of MCPA was observed in distilled water when the MOFs were incorporated in PCL. The concentrations of herbicides in the release studies provide us with a range of inhibitory concentrations that can be utilized depending on the crop, making this class of composite materials a promising new route for future agricultural applications.

Portable metal-organic framework alginate beads for high-sensitivity fluorescence detection and effective removal of residual pesticides in fruits and vegetables

Pesticides have been emerged as major organic pollutants in environment, owing to widely spread and intrinsic high toxicity in agricultural productivity. Herein, we designed and synthesized a practicability and portable metal-organic framework (MOF) based composite beads MOF-alginate-Ca²⁺-polyacrylic acid (kgd-M1@ACPs) consist of biocompatible host material (sodium alginate) and fluorescent center with blue emission (where kgd-M1 stands for {[Cd(tbia)·H₂O]·2H₂O}_n), which was further developed for high-efficiency and naked-eye 2,6-dichloro-4-nitroaniline (DCN) monitoring in fruits and vegetables. Significantly, the kgd-M1@ACPs shows obvious fluorescent quench towards toxic pesticide DCN with a low limit of detection (LOD) of 0.09 μM and high recovery from 98.08 to 104.37%. Moreover, the kgd-M1@ACPs also presents an excellent DCN adsorption ability. This work demonstrates that smart material kgd-M1@ACPs is expected to be a good candidate for detection and removal of DCN in real fruits and vegetables, which will present a broad prospect for monitoring and treating pesticides.

Using recycled coffee grounds for the synthesis of ZIF-8@BC to remove Congo red in water

Around 6.6 million tons of spent coffee is produced per year, resulting in resources loss and potential environmental risks. Hence, a green technique is required to reuse the spent coffee grains. In this study, coffee grounds were burnt at 900 °C to generate the biochar (BC) for the synthesis of the porous adsorbent (ZIF-8 @BC) by growing ZIF-8 on the surface of BC. We applied the well-prepared ZIF-8 @BC to remove Congo red (CR) in water. The maximum adsorption capacity of ZIF-8 @BC on Congo red in water was up to 1080.4 mg/g, which was significantly higher than that of many different types of BCs reported in previous studies. The reasons for its highly efficient adsorption of CR probably was attributed to metal ions and coordinatively unsaturated sites in the material. Also, BC enabled the less aggregation of ZIF-8 to provide sufficient specific surface area for CR adsorption. From the analysis of the pseudo-second-order kinetic model and Langmuir model, the adsorption of ZIF-8 @BC on CR was a homogeneously chemical adsorption process regulated by electrostatic interaction, π-π stacking and metal coordination.

Silver nanoparticles combined with amino-functionalized UiO-66 for sensitive detection of glutathione

Herein, a fluorescent nanosensor has been constructed for detection of glutathione (GSH) based on NH₂-UiO-66 and AgNPs. The NH₂-UiO-66 was synthesized where 2-amino-terephthalic acid as the organic ligand and Zr⁴⁺ as the center metal ions. The AgNPs can enhance the fluorescence of NH₂-UiO-66 based on metal enhanced fluorescence (MEF) effect. Moreover, in the present of GSH, the fluorescence of NH₂-UiO-66@AgNPs was quenched via electrostatic interaction and Ag-S reaction. The present sensing strategy shows good linear relation with the concentration of GSH in the range of 0.2-1.0 μM and 1.0-30 μM, and the limit of detection is 79 nM. Furthermore, our fluorescent nanosensor was utilized to detect GSH in human serum with a recovery of 96.8-102.5%. The results indicated that NH₂-UiO-66@AgNPs is successfully applied for high sensitive and selective detection of GSH in human serum.

Ultra-deep removal of Pb by functionality tuned UiO-66 framework: A combined experimental, theoretical and HSAB approach

A specific functionality in the adsorbent materials plays a significant role for the selective capture of heavy metals based on Pearson's Hard-Soft-Acid-Base (HSAB) concept. Herein, we introduced single and double amino- and thiol-functionalities into the UiO-66 framework, which acted as hard and soft base sites for heavy metal adsorption, respectively. The synthesized adsorbents (labelled as NH₂-UiO-66, (NH₂)₂-UiO-66, SH-UiO-66 and (SH)₂-UiO-66) were applied for the selective removal of lead (Pb) ions from contaminated water. The removal efficiency of Pb was about 64, 85, 75 and 99% (pH = 6, T = 30 °C, sample dosage = 10 mg, Pb concentration = 100 mg L^-1), respectively, based on available number of interacting sites in the respective adsorbent. To elaborate HSAB concept, the interacting sites of these functional groups towards Pb were explored by identifying their possible types of interactions in terms of soft acid-base affinity, coordinate and covalent bonding, chelation, π-π interactions and synergetic effect of bonding. Density functional theory (DFT) simulation was used to confirm these interactions and to help the better understanding of adsorption mechanism. Model fitting and characterization of Pb-sorbed adsorbents were also performed to reveal kinetics, order of adsorptive reaction, thermodynamics and adsorption mechanism. Moreover, the optimization of adsorptive removal was performed by controlled parameters including time, initial concentration, pH and temperature. The reusability and selectivity of these adsorbents along with recovery of Pb(II) were also assessed. This study presents the conceptual framework for the design of functional adsorbents in the removal of heavy metals using the HSAB principle as an intended guideline.

Adsorption investigation of 2,4-D herbicide on acid-treated peanut (Arachis hypogaea) skins

In this work, peanut (Arachis hypogaea) skin, a by-product generated by the agricultural production of its seeds, was employed as a precursor in the preparation of an adsorbent for the 2,4-D removal in water. The skins were treated with sulfuric acid and characterized by different techniques. The adsorption was favored at acid pH = 2 with pH_pzc = 6. The dosage of 0.9 g L^-1 was considered ideal, obtaining satisfactory indications of removal and capacity. The kinetic curves were well represented by the general order model, with the equilibrium reached quickly in the first 30 min for all concentrations. Adsorption isotherm studies showed that the increase in temperature negatively affected the herbicide adsorption, obtaining a maximum capacity of 246.72 mg g^-1, by the Langmuir isotherm at 298 K. The remarkable adsorption efficiency presented by the adsorbent can be associated with the presence of new functional groups on the adsorbent surface generated after the acid treatment. Thermodynamic parameters confirmed the exothermic nature of the adsorptive system. In the treatment of synthetic wastewater consisting of a mixture of herbicides and salts, a high removal efficiency (72%) of herbicides was obtained. Therefore, the development of an adsorbent derived from peanut (Arachis hypogaea) skin treated with sulfuric acid is an excellent alternative, generating remarkable removal results towards 2,4-D herbicide.

Introducing reticular chemistry into agrochemistry

For survival and quality of life, human society has sought more productive, precise, and sustainable agriculture. Agrochemistry, which solves farming issues in a chemical manner, is the core engine that drives the evolution of modern agriculture. To date, agrochemistry has utilized chemical technologies in the form of pesticides, fertilizers, veterinary drugs and various functional materials to meet fundamental demands from human society, while increasing the socio-ecological consequences due to inefficient use. Thus, more useful, precise, and designable scaffolding materials are required to support sustainable agrochemistry. Reticular chemistry, which weaves molecular units into frameworks, has been applied in many fields based on two cutting-edge porous framework materials, namely metal-organic frameworks (MOFs) and covalent-organic frameworks (COFs). With flexibility in composition, structure, and pore chemistry, MOFs and COFs have shown increasing functionalities associated with agrochemistry in the last decade, potentially introducing reticular chemistry as a highly accessible chemical toolbox into agrochemical technologies. In this critical review, we will demonstrate how reticular chemistry shapes the future of agrochemistry in the fields of farm sensing, agro-ecological preservation and reutilization, agrochemical formulations, smart indoor farming, agrobiotechnology, and beyond.

Thermal Post-Treatments to Enhance the Water Stability of NH2-MIL-125(Ti)

NH2-MIL-125(Ti) is a metal organic framework (MOF) based on Ti-oxo-clusters widely investigated in water-related applications. Such applications require MOFs with an excellent stability in the aqueous phase, but, despite this, the extent of MOFs’ degradation in water is still not yet fully understood. In this study, we report a quantitative study of the water stability of NH2-MIL-125(Ti), analyzing the ligand release along the contact time in water. This study demonstrates that NH2-MIL-125(Ti) easily leached out over time while maintaining its structure. The effect of different thermal treatments applied to NH2-MIL-125(Ti) was investigated to enhance its water stability. The structural and textural properties of those modified MOFs were studied in detail and those maintaining the NH2-MIL-125(Ti) properties were exposed to aqueous medium. The analysis of the released ligand concentration in the filtrate can provide information on the water stability of this material.