1
|
Karimi M, Shirzad M, Silva JAC, Rodrigues AE. Carbon dioxide separation and capture by adsorption: a review. ENVIRONMENTAL CHEMISTRY LETTERS 2023; 21:1-44. [PMID: 37362013 PMCID: PMC10018639 DOI: 10.1007/s10311-023-01589-z] [Citation(s) in RCA: 6] [Impact Index Per Article: 6.0] [Reference Citation Analysis] [Abstract] [Key Words] [Grants] [Track Full Text] [Subscribe] [Scholar Register] [Received: 11/09/2022] [Accepted: 02/28/2023] [Indexed: 06/02/2023]
Abstract
Rising adverse impact of climate change caused by anthropogenic activities is calling for advanced methods to reduce carbon dioxide emissions. Here, we review adsorption technologies for carbon dioxide capture with focus on materials, techniques, and processes, additive manufacturing, direct air capture, machine learning, life cycle assessment, commercialization and scale-up.
Collapse
Affiliation(s)
- Mohsen Karimi
- Laboratory of Separation and Reaction Engineering (LSRE), Associate Laboratory LSRE/LCM, Faculty of Engineering, University of Porto, Rua Dr. Roberto Frias, 4200-465 Porto, Portugal
- ALiCE - Associate Laboratory in Chemical Engineering, Faculty of Engineering, University of Porto, Rua Dr. Roberto Frias, 4200-465 Porto, Portugal
- Centro de Investigação de Montanha (CIMO), Instituto Politécnico de Bragança, Campus de Santa Apolónia, 5300-253 Bragança, Portugal
| | - Mohammad Shirzad
- Laboratory of Separation and Reaction Engineering (LSRE), Associate Laboratory LSRE/LCM, Faculty of Engineering, University of Porto, Rua Dr. Roberto Frias, 4200-465 Porto, Portugal
- ALiCE - Associate Laboratory in Chemical Engineering, Faculty of Engineering, University of Porto, Rua Dr. Roberto Frias, 4200-465 Porto, Portugal
- Centro de Investigação de Montanha (CIMO), Instituto Politécnico de Bragança, Campus de Santa Apolónia, 5300-253 Bragança, Portugal
| | - José A. C. Silva
- Centro de Investigação de Montanha (CIMO), Instituto Politécnico de Bragança, Campus de Santa Apolónia, 5300-253 Bragança, Portugal
| | - Alírio E. Rodrigues
- Laboratory of Separation and Reaction Engineering (LSRE), Associate Laboratory LSRE/LCM, Faculty of Engineering, University of Porto, Rua Dr. Roberto Frias, 4200-465 Porto, Portugal
- ALiCE - Associate Laboratory in Chemical Engineering, Faculty of Engineering, University of Porto, Rua Dr. Roberto Frias, 4200-465 Porto, Portugal
| |
Collapse
|
2
|
Biomass/Biochar carbon materials for CO2 capture and sequestration by cyclic adsorption processes: A review and prospects for future directions. J CO2 UTIL 2022. [DOI: 10.1016/j.jcou.2022.101890] [Citation(s) in RCA: 16] [Impact Index Per Article: 8.0] [Reference Citation Analysis] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 12/25/2022]
|
3
|
Narayanan S, Tamizhdurai P, Mangesh VL, Ragupathi C, Santhana Krishnan P, Ramesh A. Recent advances in the synthesis and applications of mordenite zeolite - review. RSC Adv 2020; 11:250-267. [PMID: 35423021 PMCID: PMC8691069 DOI: 10.1039/d0ra09434j] [Citation(s) in RCA: 22] [Impact Index Per Article: 5.5] [Reference Citation Analysis] [Abstract] [Track Full Text] [Download PDF] [Figures] [Journal Information] [Subscribe] [Scholar Register] [Received: 11/06/2020] [Accepted: 11/23/2020] [Indexed: 12/28/2022] Open
Abstract
Among the many industrially important zeolites, mordenite is found to be interesting because of its unique and exceptional physical and chemical properties. Mordenite (high silica zeolite) is generally prepared by the hydrothermal method using TEA+ cations. TEA+ cations are the best templating agent, though they can create a number of issues, for instance, generating poison and high manufacturing cost, wastewater contamination, and environmental pollution. Hence, it is necessary to find a mordenite synthesis method without using an organic template or low-cost template. In this review, a number of unique sources were used in the preparation of mordenite zeolite, for instance, silica sources (rice husk ash, silica gel, silica fumes), alumina sources (metakaolin, faujasite zeolite) and sources containing both silica and alumina (waste coal fly ash). These synthesis approaches are also based on the absence of a template or low-cost mixed organic templates (for instance, glycerol (GL), ethylene glycol (EG), and polyethylene glycol 200 (PEG)) or pyrrolidine-based mesoporogen (N-cetyl-N-methylpyrrolidinium) modifying the mordenite framework which can create unique properties. The framework properties and optical properties (indium-exchanged mordenite zeolite) have been discussed. Mordenite is generally used in alkylation, dewaxing, reforming, hydrocracking, catalysis, separation, and purification reactions because of its large pore size, strong acidity, and high thermal and chemical stability, although the applications are not limited for mordenite zeolite. Recently, several applications such as electrochemical detection, isomerization, carbonylation, hydrodeoxygenation, adsorption, biomass conversion, biological applications (antibacterial activity), photocatalysis, fuel cells and polymerization reactions using mordenite zeolite were explored which have been described in detail in this review.
Collapse
Affiliation(s)
- S Narayanan
- Sriram College of Arts and Science Perumalpattu, Veppampattu Tiruvallur Tamilnadu 602024 India +91-9566225479
| | - P Tamizhdurai
- Environmental and Water Resources Engineering Division, Department of Civil Engineering, Indian Institute of Technology Madras Chennai-600036 India +91-9677146579
| | - V L Mangesh
- Department of Marine Engineering, Coimbatore Marine College Coimbatore-641035 India
| | - C Ragupathi
- Sriram College of Arts and Science Perumalpattu, Veppampattu Tiruvallur Tamilnadu 602024 India +91-9566225479
| | - P Santhana Krishnan
- Department of Chemistry, College of Engineering, Guindy, Anna University Chennai 600025 India
| | - A Ramesh
- Department of Chemistry, College of Engineering, Guindy, Anna University Chennai 600025 India
| |
Collapse
|
4
|
Surra E, Bernardo M, Lapa N, Esteves IAAC, Fonseca I, Mota JPB. Biomethane production through anaerobic co-digestion with Maize Cob Waste based on a biorefinery concept: A review. JOURNAL OF ENVIRONMENTAL MANAGEMENT 2019; 249:109351. [PMID: 31419673 DOI: 10.1016/j.jenvman.2019.109351] [Citation(s) in RCA: 3] [Impact Index Per Article: 0.6] [Reference Citation Analysis] [Abstract] [Key Words] [MESH Headings] [Track Full Text] [Subscribe] [Scholar Register] [Received: 06/06/2018] [Revised: 06/10/2019] [Accepted: 08/01/2019] [Indexed: 06/10/2023]
Abstract
Maize Cob Waste (MCW) is available worldwide in high amounts, as maize is the most produced cereal in the world. MCW is generally left in the crop fields, but due to its low biodegradability it has a negligible impact in soil fertility. Moreover, MCW can be used as substrate to balance the C/N ratio during the Anaerobic co-Digestion (AcoD) with other biodegradable substrates, and is an excellent precursor for the production of Activated Carbons (ACs). In this context, a biorefinery is theoretically discussed in the present review, based on the idea that MCW, after proper pre-treatment is valorised as precursor of ACs and as co-substrate in AcoD for biomethane generation. This paper provides an overview on different scientific and technological aspects that can be involved in the development of the proposed biorefinery; the major topics considered in this work are the following ones: (i) the most suitable pre-treatments of MCW prior to AcoD; (ii) AcoD process with regard to the critical parameters resulting from MCW pre-treatments; (iii) production of ACs using MCW as precursor, with the aim to use these ACs in biogas conditioning (H2S removal) and upgrading (biomethane production), and (iv) an overview on biogas upgrading technologies.
Collapse
Affiliation(s)
- Elena Surra
- LAQV-REQUIMTE, Departamento de Ciências e Tecnologia da Biomassa, Faculdade de Ciências e Tecnologia, Universidade NOVA de Lisboa, 2829-516, Caparica, Portugal
| | - Maria Bernardo
- LAQV-REQUIMTE, Departamento de Química, Faculdade de Ciências e Tecnologia, Universidade NOVA de Lisboa, 2829-516, Caparica, Portugal
| | - Nuno Lapa
- LAQV-REQUIMTE, Departamento de Ciências e Tecnologia da Biomassa, Faculdade de Ciências e Tecnologia, Universidade NOVA de Lisboa, 2829-516, Caparica, Portugal.
| | - Isabel A A C Esteves
- LAQV-REQUIMTE, Departamento de Química, Faculdade de Ciências e Tecnologia, Universidade NOVA de Lisboa, 2829-516, Caparica, Portugal.
| | - Isabel Fonseca
- LAQV-REQUIMTE, Departamento de Química, Faculdade de Ciências e Tecnologia, Universidade NOVA de Lisboa, 2829-516, Caparica, Portugal
| | - José P B Mota
- LAQV-REQUIMTE, Departamento de Química, Faculdade de Ciências e Tecnologia, Universidade NOVA de Lisboa, 2829-516, Caparica, Portugal
| |
Collapse
|
5
|
Bokare M, Bano S, Siluvai Antony P, Pal S, Biniwale R. Selective separation of carbon dioxide from biogas mixture using mesoporous ceria and zirconium hydroxide. ADSORPTION 2019. [DOI: 10.1007/s10450-019-00170-x] [Citation(s) in RCA: 4] [Impact Index Per Article: 0.8] [Reference Citation Analysis] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 11/28/2022]
|
6
|
Biogas Purification: A Comparison of Adsorption Performance in D4 Siloxane Removal Between Commercial Activated Carbons and Waste Wood-Derived Char Using Isotherm Equations. Processes (Basel) 2019. [DOI: 10.3390/pr7100774] [Citation(s) in RCA: 18] [Impact Index Per Article: 3.6] [Reference Citation Analysis] [Abstract] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 12/23/2022] Open
Abstract
Biogas production from organic waste could be an option to reduce landfill and pollutant emissions into air, water, and soil. These fuels contain several trace compounds that are crucial for highly efficient energy generators or gas injection into the grid. The ability of adsorbents to physically remove such adsorbates was investigated using adsorption isotherms at a constant temperature. We experimentally modelled isotherms for siloxane removal. Siloxanes were considered due to their high impact on energy generators performance even at low concentrations. Octamethylcyclotetrasiloxane was selected as a model compound and was tested using commercially available carbon and char derived from waste materials. The results show that recyclable material can be used in an energy production site and that char must be activated to improve its removal performance. The adsorption capacity is a function of specific surface area and porous volume rather than the elemental composition. The most common adsorption isotherms were employed to find the most appropriate isotherm to estimate the adsorption capacity and to compare the sorbents. The Dubinin-Radushkevich isotherm coupled with the Langmuir isotherm was found to be the best for estimating the adsorption capacity.
Collapse
|
7
|
Abstract
The aim of the present work is to study the effect of different activation methods for the production of a biomass-based activated carbon on the CO 2 and CH 4 adsorption. The influence of the activation method on the adsorption uptake was studied using three activated carbons obtained by different activation methods (H 3 PO 4 chemical activation and H 2 O and CO 2 physical activation) of olive stones. Methane and carbon dioxide pure gas adsorption experiments were carried out at two working temperatures (303.15 and 323.15 K). The influence of the activation method on the adsorption uptake was studied in terms of both textural properties and surface chemistry. For the three adsorbents, the CO 2 adsorption was more important than that of CH 4 . The chemically-activated carbon presented a higher specific surface area and micropore volume, which led to a higher adsorption capacity of both CO 2 and CH 4 . For methane adsorption, the presence of mesopores facilitated the diffusion of the gas molecules into the micropores. In the case of carbon dioxide adsorption, the presence of more oxygen groups on the water vapor-activated carbon enhanced its adsorption capacity.
Collapse
|
8
|
Vivo-Vilches JF, Pérez-Cadenas AF, Maldonado-Hódar FJ, Carrasco-Marín F, Regufe MJ, Ribeiro AM, Ferreira AFP, Rodrigues AE. Resorcinol–formaldehyde carbon xerogel as selective adsorbent of carbon dioxide present on biogas. ADSORPTION 2018. [DOI: 10.1007/s10450-018-9933-6] [Citation(s) in RCA: 8] [Impact Index Per Article: 1.3] [Reference Citation Analysis] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 12/01/2022]
|
9
|
Pino L, Italiano C, Vita A, Fabiano C, Recupero V. Sorbents with high efficiency for CO 2 capture based on amines-supported carbon for biogas upgrading. J Environ Sci (China) 2016; 48:138-150. [PMID: 27745659 DOI: 10.1016/j.jes.2016.01.029] [Citation(s) in RCA: 8] [Impact Index Per Article: 1.0] [Reference Citation Analysis] [Abstract] [Key Words] [MESH Headings] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Received: 10/28/2015] [Revised: 01/26/2016] [Accepted: 01/27/2016] [Indexed: 06/06/2023]
Abstract
Sorbents for CO2 capture have been prepared by wet impregnation of a commercial active carbon (Ketjen-black, Akzo Nobel) with two CO2-philic compounds, polyethylenimine (PEI) and tetraethylenepentamine (TEPA), respectively. The effects of amine amount (from 10 to 70wt.%), CO2 concentration in the feed, sorption temperature and gas hourly space velocity on the CO2 capture performance have been investigated. The sorption capacity has been evaluated using the breakthrough method, with a fixed bed reactor equipped with on line gas chromatograph. The samples have been characterized by N2 adsorption-desorption, scanning electron microscopy and energy dispersive X-ray (SEM/EDX). A promising CO2 sorption capacity of 6.90 mmol/gsorbent has been obtained with 70wt.% of supported TEPA at 70°C under a stream containing 80vol% of CO2. Sorption tests, carried out with simulated biogas compositions (CH4/CO2 mixtures), have revealed an appreciable CO2 separation selectivity; stable performance was maintained for 20 adsorption-desorption cycles.
Collapse
Affiliation(s)
- Lidia Pino
- CNR Institute of Advanced Technology for Energy "Nicola Giordano", Via S. Lucia 5, 98126 Messina, Italy.
| | - Cristina Italiano
- CNR Institute of Advanced Technology for Energy "Nicola Giordano", Via S. Lucia 5, 98126 Messina, Italy
| | - Antonio Vita
- CNR Institute of Advanced Technology for Energy "Nicola Giordano", Via S. Lucia 5, 98126 Messina, Italy
| | - Concetto Fabiano
- CNR Institute of Advanced Technology for Energy "Nicola Giordano", Via S. Lucia 5, 98126 Messina, Italy
| | - Vincenzo Recupero
- CNR Institute of Advanced Technology for Energy "Nicola Giordano", Via S. Lucia 5, 98126 Messina, Italy
| |
Collapse
|