In vivo dose verification method in catheter based high dose rate brachytherapy

Feasibility of internal-source tracking with C-arm CT/SPECT imaging with limited-angle projection data for online in vivo dose verification in brachytherapy: A Monte Carlo simulation study

PURPOSE

The current protocol for use of the image-guided adaptive brachytherapy (IGABT) procedure entails transport of a patient between the treatment room and the 3-D tomographic imaging room after implantation of the applicators in the body, which movement can cause position displacement of the applicator. Moreover, it is not possible to track 3-D radioactive source movement inside the body, even though there can be significant inter- and intra-fractional patient-setup changes. In this paper, therefore, we propose an online single-photon emission computed tomography (SPECT) imaging technique with a combined C-arm fluoroscopy X-ray system and attachable parallel-hole collimator for internal radioactive source tracking of every source position in the applicator.

METHODS AND MATERIALS

In the present study, using Geant4 Monte Carlo (MC) simulation, the feasibility of high-energy gamma detection with a flat-panel detector for X-ray imaging was assessed. Further, a parallel-hole collimator geometry was designed based on an evaluation of projection image quality for a 192Ir point source, and 3-D limited-angle SPECT-image-based source-tracking performances were evaluated for various source intensities and positions.

RESULTS

The detector module attached to the collimator could discriminate the 192Ir point source with about 3.4% detection efficiency when including the total counts in the entire deposited energy region. As the result of collimator optimization, hole size, thickness, and length were determined to be 0.5, 0.2, and 45 mm, respectively. Accordingly, the source intensities and positions also were successfully tracked with the 3-D SPECT imaging system when the C-arm was rotated within 110° in 2 seconds.

CONCLUSIONS

We expect that this system can be effectively implemented for online IGABT and in vivo patient dose verification.

A disposable OSL dosimeter for in vivo measurement of rectum dose during brachytherapy

PURPOSE

We aimed to develop a disposable rectum dosimeter and to demonstrate its ability to measure exposure dose to the rectum during brachytherapy for cervical cancer treatment using high-dose rate ¹⁹² Ir. Our rectum dosimeter measures the dose with an optically stimulated luminescence (OSL) sheet which was furled to a catheter. The catheter we used is 6 mm in diameter; therefore, it is much less invasive than other rectum dosimeters. The rectum dosimeter developed in this study has the characteristics of being inexpensive and disposable. It is also an easy-to-use detector that can be individually sterilized, making it suitable for clinical use.

METHODS

To obtain a dose calibration curve, phantom experiments were performed. Irradiation was performed using a cubical acrylic phantom, and the response of the OSL dosimeter was calibrated with the calculation value predicted by the treatment planning system (TPS). Additionally, the dependence of catheter angle on the dosimeter position and repeatability were evaluated. We also measured the absorbed dose to the rectum of patients who were undergoing brachytherapy for cervical cancer (n = 64). The doses measured with our dosimeters were compared with the doses calculated by the TPS. In order to examine the causes of large differences between measured and planned doses, we classified the data into common and specific cases when performing this clinical study. For specific cases, the following three categories were considered: (a) patient movement, (b) gas in the vagina and/or rectum, and (c) artifacts in the X-ray image caused by applicators.

RESULTS

A dose calibration curve was obtained in the range of 0.1 Gy-10.0 Gy. From the evaluation of the dependence of catheter angle on the dosimeter position and repeatability, we determined that our dosimeter can measure rectum dose with an accuracy of 3.1% (k = 1). In this clinical study, we succeeded in measuring actual doses using our rectum dosimeter. We found that the deviation of the measured dose from the planned dose was derived to be 12.7% (k = 1); this result shows that the clinical study included large elements of uncertainty. The discrepancies were found to be due to patient motion during treatment, applicator movement after planning images were taken, and artifacts in the planning images.

CONCLUSIONS

We present the idea that a minimally invasive rectum dosimeter can be fabricated using an OSL sheet. Our clinical study demonstrates that a rectum dosimeter made from an OSL sheet has sufficient ability to evaluate rectum dose. Using this dosimeter, valuable information concerning organs at risk can be obtained during brachytherapy.

Brachytherapy treatment verification using gamma radiation from the internal treatment source combined with an imaging panel-a phantom study

Brachytherapy has an excellent clinical outcome for different treatment sites. However,in vivotreatment verification is not performed in the majority of hospitals due to the lack of proper monitoring systems. This study investigates the use of an imaging panel (IP) and the photons emitted by a high dose rate (HDR)¹⁹²Ir source to track source motion and obtain some information related to the patient anatomy. The feasibility of this approach was studied by monitoring the treatment delivery to a 3D printed phantom that mimicks a prostate patient. A 3D printed phantom was designed with a template for needle insertion, a cavity ('rectum') to insert an ultrasound probe, and lateral cavities used to place tissue-equivalent materials. CT images were acquired to create HDR¹⁹²Ir treatment plans with a range of dwell times, interdwell distances and needle arrangements. Treatment delivery was verified with an IP placed at several positions around the phantom using radiopaque markers on the outer surface to register acquired IP images with the planning CT. All dwell positions were identified using acquisition times ≤0.11 s (frame rates ≥ 9 fps). Interdwell distances and dwell positions (in relation to the IP) were verified with accuracy better than 0.1 cm. Radiopaque markers were visible in the acquired images and could be used for registration with CT images. Uncertainties for image registration (IP and planning CT) between 0.1 and 0.4 cm. The IP is sensitive to tissue-mimicking insert composition and showed phantom boundaries that could be used to improve treatment verification. The IP provided sufficient time and spatial resolution for real-time source tracking and allows for the registration of the planning CT and IP images. The results obtained in this study indicate that several treatment errors could be detected including swapped catheters, incorrect dwell times and dwell positions.

THERMOLUMINESCENCE DOSIMETRY (TLD) IN MEDICINE: FIVE 'W'S AND ONE HOW

Thermoluminescence dosimetry (TLD) has a long history of applications in medicine. However, despite its versatility and sensitivity its use is anecdotally diminishing, at least in part due to the complexity and work intensity of a quality TLD service. The present paper explores the role of TLD in medicine using a common inquiry methodology (5W1H) which systematically asks 'Who, What, When, Where, Why and How' to identify what role TLD could and should play in medical applications.

In vivo dosimetry in brachytherapy: Requirements and future directions for research, development, and clinical practice

Brachytherapy can deliver high doses to the target while sparing healthy tissues due to its steep dose gradient leading to excellent clinical outcome. Treatment accuracy depends on several manual steps making brachytherapy susceptible to operational mistakes. Currently, treatment delivery verification is not routinely available and has led, in some cases, to systematic errors going unnoticed for years. The brachytherapy community promoted developments in in vivo dosimetry (IVD) through research groups and small companies. Although very few of the systems have been used clinically, it was demonstrated that the likelihood of detecting deviations from the treatment plan increases significantly with time-resolved methods. Time–resolved methods could interrupt a treatment avoiding gross errors which is not possible with time-integrated dosimetry. In addition, lower experimental uncertainties can be achieved by using source-tracking instead of direct dose measurements. However, the detector position in relation to the patient anatomy remains a main source of uncertainty. The next steps towards clinical implementation will require clinical trials and systematic reporting of errors and near-misses. It is of utmost importance for each IVD system that its sensitivity to different types of errors is well understood, so that end-users can select the most suitable method for their needs. This report aims to formulate requirements for the stakeholders (clinics, vendors, and researchers) to facilitate increased clinical use of IVD in brachytherapy. The report focuses on high dose-rate IVD in brachytherapy providing an overview and outlining the need for further development and research.

Dose perturbation and inhomogeneity of multi-arrays of 125I seed-loaded stent for treatment of portal vein tumor thrombosis

PURPOSE

To investigate the dosimetry of ¹²⁵I seed-loaded stent system currently used for an adjuvant treatment of portal vein tumor thrombosis (PVTT).

METHODS

The stent system consisted of an inner metallic stent and outer seed-loaded capsules. Four arrays of ¹²⁵I seeds were attached longitudinally to the outer surface of the stent at 90° separation. 145 Gy was prescribed at 5 mm from the axes of seed-arrays. For the geometries of the 4-array, and potential 6- and 8-array configurations, treatment planning system (TPS) and Monte Carlo (MC) calculations were performed to evaluate 3D dose distributions and dosimetric impact of the metallic stent.

RESULTS

The MC simulations indicated the metallic stent reduced a dose to the prescription points by over 10%, compared to the water-based TPS results. The total activity calculated by the water-based TPS to deliver the prescription dose should compensate for this amount of reduction. The MC- and TPS-calculated doses normalized to the prescription points for the current configuration were in agreements within 4.3% on a cylindrical surface along 5 mm from the axes of seed-arrays. The longitudinal underdosage worsened as approaching the edge of arrays, and ranged from 2.8% to 25.5%. The angular underdosage between neighboring arrays was 2.1%-8.9%.

CONCLUSIONS

With this compensation and a special care of near-edge underdosage, the current 4-array system can provide adequate dose coverage for treatment of PVTT. Further dosimetric homogeneity can be achieved using 6-or 8-array configurations.

Dynamic Modulated Brachytherapy (DMBT) Balloon Applicator for Accelerated Partial Breast Irradiation

PURPOSE

To propose a novel high-dose-rate brachytherapy applicator for balloon-based dynamic modulated brachytherapy (DMBT) for accelerated partial breast irradiation (APBI) and to demonstrate its dosimetric advantage compared to the widely used Contura applicator.

METHODS AND MATERIALS

The DMBT balloon device consists of a fixed central channel enabling real-time, in vivo dosimetry and an outer motion-dynamic, adjustable-radius channel capable of moving to any angular position within the balloon. This design allows placement of dwell positions anywhere within the balloon volume, guaranteeing optimal placement and generation of the applicator and treatment plan, respectively. Thirteen clinical treatment plans for patients with early-stage breast cancer receiving APBI after lumpectomy using Contura were retrospectively obtained under institutional review board approval. New treatment plans were created by replacing the Contura with the DMBT device. DMBT plans were limited to 4 angular positions and an outer channel radius of 1.5 cm. The new plans were optimized to limit dose to ribs and skin while maintaining target coverage similar to that of the clinical plan.

RESULTS

Similar target coverage was obtained for the DMBT plans compared with clinical Contura plans. Across all patients the mean (standard deviation) reductions in D0.1 cc to the ribs and skin were 6.70% (6.28%) and 5.13% (6.54%), respectively. A threshold separation distance between the balloon surface and the organ at risk (OAR), below which dosimetric changes of greater than 5% were obtained, was observed to be 12 mm for ribs and skin. When both OARs were far from the balloon, DMBT plans were of similar quality to Contura plans, as expected.

CONCLUSIONS

This study demonstrates the superior ability of the APBI DMBT applicator to spare OARs while achieving target coverage comparable to current treatment plans, especially when in close proximity. The DMBT balloon may enable new modes of dynamic high-dose-rate treatment delivery and allow for ultrahypofractionated dose regimens to be safely used.