Simulation of embryo transport in a closed uterine cavity model

Arrangement into layers and mechanobiology of multi-cell co-culture models of the uterine wall

STUDY QUESTION

Can a co-culture of three cell types mimic the in vivo layers of the uterine wall?

SUMMARY ANSWER

Three protocols tested for co-culture of endometrial epithelial cells (EEC), endometrial stromal cells (ESC), and myometrial smooth muscle cells (MSMC) led to formation of the distinct layers that are characteristic of the structure of the uterine wall in vivo.

WHAT IS KNOWN ALREADY

We previously showed that a layer-by-layer co-culture of EEC and MSMC responded to peristaltic wall shear stresses (WSS) by increasing the polymerization of F-actin in both layers. Other studies showed that WSS induced significant cellular alterations in epithelial and endothelial cells.

STUDY DESIGN, SIZE, DURATION

Human EEC and ESC cell lines and primary MSMC were co-cultured on a collagen-coated synthetic membrane in custom-designed wells. The co-culture model, created by seeding a mixture of all cells at once, was exposed to steady WSS of 0.5 dyne/cm2 for 10 and 30 min.

PARTICIPANTS/MATERIALS, SETTING, METHODS

The co-culture of the three different cells was seeded either layer-by-layer or as a mixture of all cells at once. Validation of the models was by specific immunofluorescence staining and confocal microscopy. Alterations of the cytoskeletal F-actin in response to WSS were analyzed from the 2-dimensional confocal images through the Z-stacks following a previously published algorithm.

MAIN RESULTS AND THE ROLE OF CHANCE

We generated three multi-cell in vitro models of the uterine wall with distinct layers of EEC, ESC, and MSMC that mimic the in vivo morphology. Exposure of the mixed seeding model to WSS induced increased polymerization of F-actin in all the three layers relative to the unexposed controls. Moreover, the increased polymerization of F-actin was higher (P-value < 0.05) when the length of exposure was increased from 10 to 30 min. Furthermore, the inner layers of ESC and MSMC, which are not in direct contact with the applied shearing fluid, also increased their F-actin polymerization.

LARGE SCALE DATA

N/A.

LIMITATIONS, RESONS FOR CAUTION

The mixed seeding co-culture model was exposed to steady WSS of one magnitude, whereas the uterus is a dynamic organ with intra-uterine peristaltic fluid motions that vary in vivo with different time-dependent magnitude. Further in vitro studies may explore the response to peristaltic WSS or other physical and/or hormonal perturbations that may mimic the spectrum of pathophysiological aspects.

WIDER IMPLICATIONS OF THE FINDINGS

Numerous in vitro models were developed in order to mimic the human endometrium and endometrium-myometrium interface (EMI) region. The present co-culture models seem to be the first constructed from EEC, ESC, and MSMC on a collagen-coated synthetic membrane. These multi-cell in vitro models better represent the complex in vivo anatomy of the EMI region. The mixed seeding multi-cell in vitro model may easily be implemented in controlled studies of uterine function in reproduction and the pathogenesis of diseases.

STUDY FINDING/COMPETING INTEREST(S)

This study was supported in part by Tel Aviv University funds. All authors declare no conflict of interest.

Tissue engineered endometrial barrier exposed to peristaltic flow shear stresses

Cyclic myometrial contractions of the non-pregnant uterus induce intra-uterine peristaltic flows, which have important roles in transport of sperm and embryos during early stages of reproduction. Hyperperistalsis in young females may lead to migration of endometrial cells and development of adenomyosis or endometriosis. We conducted an in vitro study of the biological response of a tissue engineered endometrial barrier exposed to peristaltic wall shear stresses (PWSSs). The endometrial barrier model was co-cultured of endometrial epithelial cells on top of myometrial smooth muscle cells (MSMCs) in custom-designed wells that can be disassembled for mechanobiology experiments. A new experimental setup was developed for exposing the uterine wall in vitro model to PWSSs that mimic the in vivo intra-uterine environment. Peristaltic flow was induced by moving a belt with bulges to deform the elastic cover of a fluid filled chamber that held the uterine wall model at the bottom. The in vitro biological model was exposed to peristaltic flows for 60 and 120 min and then stained for immunofluorescence studies of alternations in the cytoskeleton. Quantification of the F-actin mass in both layers revealed a significant increase with the length of exposure to PWSSs. Moreover, the inner layer of MSMCs that were not in direct contact with the fluid also responded with an increase in the F-actin mass. This new experimental approach can be expanded to in vitro studies of multiple structural changes and genetic expressions, while the tissue engineered uterine wall models are tested under conditions that mimic the in vivo physiological environment.

Engineering and women's health: a slow start, but gaining momentum

While biomedical engineers have participated in research studies that focus on understanding aspects particular to women's health since the 1950s, the depth and breadth of the research have increased significantly in the last 15-20 years. It has been increasingly clear that engineers can lend important knowledge and analysis to address questions that are key to understanding physiology and pathophysiology related to women's health. This historical survey identifies some of the earliest contributions of engineers to exploring aspects of women's health, from the behaviour of key tissues, to issues of reproduction and breast cancer. In addition, some of the more recent work in each area is identified and areas deserving additional attention are described. The interdisciplinary nature of this area of engineering, along with the growing interest within the field of biomedical engineering, promise to bring exciting new discoveries and expand knowledge that will positively impact women's health in the near future.

Biomechanics of the human uterus

The appropriate biomechanical function of the uterus is required for the execution of human reproduction. These functions range from aiding the transport of the embryo to the implantation site, to remodeling its tissue walls to host the placenta, to protecting the fetus during gestation, to contracting forcefully for a safe parturition and postpartum, to remodeling back to its nonpregnant condition to renew the cycle of menstruation. To serve these remarkably diverse functions, the uterus is optimally geared with evolving and contractile muscle and tissue layers that are cued by chemical, hormonal, electrical, and mechanical signals. The relationship between these highly active biological signaling mechanisms and uterine biomechanical function is not completely understood for normal reproductive processes and pathological conditions such as adenomyosis, endometriosis, infertility and preterm labor. Animal studies have illuminated the rich structural function of the uterus, particularly in pregnancy. In humans, medical imaging techniques in ultrasound and magnetic resonance have been combined with computational engineering techniques to characterize the uterus in vivo, and advanced experimental techniques have explored uterine function using ex vivo tissue samples. The collective evidence presented in this review gives an overall perspective on uterine biomechanics related to both its nonpregnant and pregnant function, highlighting open research topics in the field. Additionally, uterine disease and infertility are discussed in the context of tissue injury and repair processes and the role of computational modeling in uncovering etiologies of disease. WIREs Syst Biol Med 2017, 9:e1388. doi: 10.1002/wsbm.1388 For further resources related to this article, please visit the WIREs website.

Morphogenetic implications of peristaltic fluid-tissue dynamics in the embryonic lung

Peristalsis begins in the lung as soon as the smooth muscle forms, and persists until birth. Since the prenatal lung is liquid-filled, smooth muscle action can deform tissues and transport fluid far from the immediately adjacent tissues. Stretching of embryonic tissues and sensation of internal fluid flows have been shown to have potent morphogenetic effects. We hypothesize that these effects are at work in lung morphogenesis. To place that hypothesis in a quantitative framework, we analyze a model of the fluid-structure interactions between embryonic tissues and lumen fluid resulting from peristaltic waves that partially occlude the airway. We find that if the airway is closed, deformations are synchronized; by contrast, if the trachea is open, maximal occlusion precedes maximal pressure. We perform a parametric analysis of how occlusion, stretch, and flow depend on tissue stiffnesses, smooth muscle force, tissue shape and size, and fluid viscosity. We find that most of these relationships are governed by simple ratios.

Modeling Embryo Transfer into a Closed Uterine Cavity

Embryo transfer (ET) is the last manual intervention after extracorporeal fertilization. After the ET procedure is completed, the embryos are conveyed in the uterus for another two to four days due to spontaneous uterine peristalsis until the window time for implantation. The role of intrauterine fluid flow patterns in transporting the embryos to their implantation site during and after ET was simulated by injection of a liquid bolus into a two-dimensional liquid-filled channel with a closed fundal end via a liquid-filled catheter inserted in the channel. Numerical experiments revealed that the intrauterine fluid field and the embryos transport pattern were strongly affected by the closed fundal end. The embryos re-circulated in small loops around the vicinity where they were deposited from the catheter. The transport pattern was controlled by the uterine peristalsis factors, such as amplitude and frequency of the uterine walls motility, as well as the synchronization between the onset of catheter discharge and uterine peristalsis. The outcome of ET was also dependent on operating parameters such as placement of the catheter tip within the uterine cavity and the delivery speed of the catheter load. In conclusion, this modeling study highlighted important parameters that should be considered during ET procedures in order to increase the potential for pregnancy success.