The effect of wet granulation on the erosion behaviour of an HPMC–lactose tablet, used as a rate-controlling component in a pulsatile drug delivery capsule formulation

Application of simplex lattice design for the development of extended release tablets of model drug diclofenac sodium

Aim: Simplex lattice design was applied to predict extent of drug release from extended release diclofenac sodium tablets. Methods: The effects of composition on dissolution rate were evaluated by varying the levels of hydroxypropyl methylcellulose, dicalcium phosphate and cornstarch via three component design. Results: The rate of drug release was primarily dictated by the proportion of hydroxypropyl methylcellulose and was also affected by the proportion of dicalcium phosphate and the method of processing (direct compression/wet granulation). Polynomial equations constructed for directly compressed and wet-granulated formulations could successfully predict the extent of drug release at an arbitrary time point of 3 h. Conclusion: Simplex lattice design is a viable tool to predict the drug release patterns of extended release formulations.

In Vitro Evaluation of Cocoa Pod Husk Pectin as a Carrier for Chronodelivery of Hydrocortisone Intended for Adrenal Insufficiency

This study evaluated the in vitro potential of cocoa pod husk (CPH) pectin as a carrier for chronodelivery of hydrocortisone intended for adrenal insufficiency. FTIR studies found no drug-CPH pectin interactions, and chemometric analysis showed that pure hydrocortisone bears closer similarity to hydrocortisone in hot water soluble pectin (HWSP) than hydrocortisone in citric acid soluble pectin (CASP). CPH pectin-based hydrocortisone matrix tablets (~300 mg) were prepared by direct compression and wet granulation techniques, and the tablet cores were film-coated with a 15% HPMC formulation for timed release, followed by a 12.5% Eudragit® S100 formulation for acid resistance. In vitro drug release studies of the uncoated and coated matrix tablets in simulated gastrointestinal conditions showed that wet granulation tablets exhibit greater retardation of drug release in aqueous medium than directly compressed tablets. CASP showed greater suppression of drug release in aqueous medium than HWSP. Wet granulation HWSP-based matrix tablets coated to a final coat weight gain of ~25% w/w were optimized for chronodelivery of hydrocortisone in the colon. The optimized tablets exhibited a lag phase of ~6 h followed by accelerated drug release in the colonic region and have potential to control night time cortisol levels in patients with adrenal insufficiency.

On-off pulsed oral drug-delivery systems: a possible tool for drug delivery in chronotherapy

Circadian rhythms regulate most body functions and are important factors to consider when administering drugs. The existence of circadian rhythms in nature and their influences on human biological systems have given rise to the concept of chronotherapy, which is the science of delivering drugs in a synchronized manner with the rhythm-dependent circadian variation inherent in the human body. The safety and efficacy of a drug can be improved by matching the peak plasma concentration during a 24 h period of the rhythms. An on-off pulsed (pulsatile or time-controlled) release drug-delivery system offers rapid and transient release; stepwise release; and the sustained release of a certain amount of drug within a short time period after a predetermined off-release period according to the circadian rhythm of disease states. These systems deliver the drug at the right time and at an appropriate dosage and are the best approach for chronotherapy. These systems show promise for the optimal therapy of chronic diseases such as asthma, hypertension, myocardial infarction and arthritis, which show a circadian dependency. Various technologies have been adopted to mimic circadian rhythms in physiological functions and diseases. This review focuses on the basic concept of circadian rhythm, chronotherapy and recent advances in the development of on-off pulsed oral drug-delivery systems for optimal therapy.

Erosion Characteristics of an Erodible Tablet Incorporated in a Time-Delayed Capsule Device

A time-delayed oral drug delivery device was investigated in which an erodible tablet (ET), sealing the mouth of an insoluble capsule, controlled the lag-time prior to drug release. The time-delayed capsule (TDC) lag-time may be altered by manipulation of the excipients used in the preparation of the ET. Erosion rates and drug release profiles from TDCs were investigated with four different excipient admixtures with lactose: calcium sulphate dihydrate (CSD), dicalcium phosphate (DCP), hydroxypropylmethyl cellulose (HPMC; Methocel K100LV grade) and silicified microcrystalline cellulose (SMCC; Prosolv 90 grade). Additionally, the compressibility of different insoluble coated capsules was tested at different moisture levels to determine their overall integrity and suitability for oral delivery. Erosion rates of CSD, DCP, and SMCC displayed a nonlinear relationship to their concentration, while HPMC indicated rapid first-order erosion followed by zero-order erosion, the onset of which was dependent on the HPMC concentration. Capsule integrity was confirmed to be most suitable for oral delivery when the insoluble ethyl cellulose coat was applied to a hard gelatin capsule using an organic spray coating process. T50% drug release times varied between 245 (+/-33.4) and 393 (+/-40.8) minutes for 8% and 20% DCP, respectively, T50% release times of 91 (+/-22.1) and 167 (+/-34.6) were observed for 8% and 20% CSD; both formulations showed incidence of premature drug release. The SMCC formulations showed high variability due to lamination effects. The HPMC formulations had T50% release times of 69 (+/-13.9), 213 (+/-25.4), and 325 (+/-30.3) minutes for 15%, 24%, and 30% HPMC concentrations respectively, with no premature drug release. In conclusion, HPMC showed the highest reproducibility for a range of time-delayed drug release from the assembled capsule formulation. The method of capsule coating was confirmed to be important by investigation of the overall capsule integrity at elevated humidity levels. The erosion characteristics of ETs containing HPMC may be described by gravimetric loss. The novel time-delayed capsule device presented in this study may be assembled to include an erodible tablet with a known concentration of HPMC. A variety of suitable drugs for targeted chronopharmaceutical therapy can be incorporated into such a device, ultimately improving drug efficacy and patient compliance, and reducing harmful side effects.

Oral pulsatile delivery systems based on swellable hydrophilic polymers

Upon contact with aqueous fluids, swellable hydrophilic polymers undergo typical chain relaxation phenomena that coincide with a glassy-rubbery transition. In the rubbery phase, these polymers may be subject to swelling, dissolution and erosion processes or, alternatively, form an enduring gel barrier when cross-linked networks (hydrogels) are dealt with. Because of the peculiar hydration and biocompatibility properties, such materials are widely exploited in the pharmaceutical field, particularly as far as hydrophilic cellulose derivatives are concerned. In oral delivery, they have for long been employed in the manufacturing of prolonged release matrices and, more recently, for pulsatile (delayed) release devices as well. Pulsatile delivery, which is meant as the liberation of drugs following programmed lag phases, has drawn increasing interest especially in view of emerging chronotherapeutic approaches. In pursuit of pulsatile release, various design strategies have been proposed, chiefly including reservoir, capsular and osmotic formulations. In most cases, water-swellable polymers play a key role in the overall delivery mechanism after being activated by physiological media. Based on these premises, the aim of the present review is to survey the main oral pulsatile delivery systems, for which swelling, dissolution and/or erosion of hydrophilic polymers are primarily involved in the control of release.

Time-controlled oral delivery systems for colon targeting

In recent years, many research efforts have been spent in the achievement of selective delivery of drugs into the colon following oral administration. Indeed, colonic release is regarded as a beneficial approach to the pharmacological treatment or prevention of widespread large bowel pathologies, such as inflammatory bowel disease and adenocarcinoma. In addition, it is extensively explored as a potential means of enhancing the oral bioavailability of peptides, proteins and other biotechnological molecules, which are known to be less prone to enzymatic degradation in the large, rather than in the small, intestine. Based on these premises, several formulation strategies have been attempted in pursuit of colonic release, chiefly including microflora-, pH-, pressure- and time-dependent delivery technologies. In particular, this review is focused on the main design features and release performances of time-controlled devices, which rely on the relative constancy that is observed in the small intestinal transit time of dosage forms.

Properties of sustained release hot-melt extruded tablets containing chitosan and xanthan gum

The aim of this study was to investigate the influence of pH, buffer species and ionic strength on the release mechanism of chlorpheniramine maleate (CPM) from matrix tablets containing chitosan and xanthan gum prepared by a hot-melt extrusion process. Drug release from hot-melt extruded (HME) tablets containing either chitosan or xanthan gum was pH and buffer species dependent and the release mechanisms were controlled by the solubility and ionic properties of the polymers. All directly compressed (DC) tablets prepared in this study also exhibited pH and buffer species dependent release. In contrast, the HME tablets containing both chitosan and xanthan gum exhibited pH and buffer species independent sustained release. When placed in 0.1N HCl, the HME tablets formed a hydrogel that functioned to retard drug release in subsequent pH 6.8 and 7.4 phosphate buffers even when media contained high ionic strength, whereas tablets without chitosan did not form a hydrogel to retard drug release in 0.1N HCl. The HME tablets containing both chitosan and xanthan gum showed no significant change in drug release rate when stored at 40 degrees C for 1 month, 40 degrees C and 75% relative humidity (40 degrees C/75% RH) for 1 month, and 60 degrees C for 15 days.

Oral pulsatile drug delivery systems

In the field of modified release, there has been a growing interest in pulsatile delivery, which generally refers to the liberation of drugs following a programmable lag phase from the time of administration. In particular, the recent literature reports on a variety of pulsatile release systems intended for the oral route, which have been recognised as potentially beneficial to the chronotherapy of widespread diseases, such as bronchial asthma or angina pectoris, with mainly night or early morning symptoms. In addition, time-dependent colon delivery may also represent an appealing related application. The delayed liberation of orally administered drugs has been achieved through a range of formulation approaches, including single- or multiple-unit systems provided with release-controlling coatings, capsular devices and osmotic pumps. Based on these premises, the aim of this review is to outline the rational and prominent design strategies behind oral pulsatile delivery.

Effect of solvents on physical properties and release characteristics of monolithic hydroxypropylmethylcellulose matrix granules and tablets

Effect of solvents on physical characteristics and release characteristics of monolithic acetaminophen (APAP) hydroxypropylmethylcellulose (HPMC) matrix granules and tablets were examined. Various types and amounts of solvents were employed for granulation and cOAting. APAP and other excipients were mixed and were then wet-granulated in a high-speed mixer. The dried granules were then directly compressed and film-coated with low viscosity grade HPMC. As the amount of water increased, the size of granules also increased, showing more spherical and regular shape. However, manufacturing problems such as capping and lamination in tableting occurred when water was used alone as a granulating solvent. The physical properties of HPMC matrix granules were not affected by the batch size. The initial release rate as well as the amount of APAP dissolved had a tendency to decrease as the water level increased. Addition of nonaqueous solvent like ethanol to water resulted in good physical properties of granules. When compared to water/ethanol as a coating solvent, the release rate of film-coated HPMC matrix tablets was more sensitive to the conditions of coating and drying in methylene chloride/ethanol. Most of all, monolithic HPMC matrix tablet when granulated in ethanol/water showed dual release with about 50% drug release immediately within few minutes followed by extended release. It was evident that the type and amount of solvents (mainly water and ethanol) were very important for wet granulation and film-coating of monolithic HPMC matrix tablet, because the plastic deforming and fragmenting properties of material were changed by the different strengths of the different solvents.