Chitosan-graft-spermine as a gene carrier in vitro and in vivo

Folate-engineered chitosan nanoparticles: next-generation anticancer nanocarriers

Chitosan nanoparticles (NPs) are well-recognized as promising vehicles for delivering anticancer drugs due to their distinctive characteristics. They have the potential to enclose hydrophobic anticancer molecules, thereby enhancing their solubilities, permeabilities, and bioavailabilities; without the use of surfactant, i.e., through surfactant-free solubilization. This allows for higher drug concentrations at the tumor sites, prevents excessive toxicity imparted by surfactants, and could circumvent drug resistance. Moreover, biomedical engineers and formulation scientists can also fabricate chitosan NPs to slowly release anticancer agents. This keeps the drugs at the tumor site longer, makes therapy more effective, and lowers the frequency of dosing. Notably, some types of cancer cells (fallopian tube, epithelial tumors of the ovary, and primary peritoneum; lung, kidney, ependymal brain, uterus, breast, colon, and malignant pleural mesothelioma) have overexpression of folate receptors (FRs) on their outer surface, which lets folate-drug conjugate-incorporated NPs to target and kill them more effectively. Strikingly, there is evidence suggesting that the excessively produced FR&αgr (isoforms of the FR) stays consistent throughout treatment in ovarian and endometrial cancer, indicating resistance to conventional treatment; and in this regard, folate-anchored chitosan NPs can overcome it and improve the therapeutic outcomes. Interestingly, overly expressed FRs are present only in certain tumor types, which makes them a promising biomarker for predicting the effectiveness of FR-targeted therapy. On the other hand, the folate-modified chitosan NPs can also enhance the oral absorption of medicines, especially anticancer drugs, and pave the way for effective and long-term low-dose oral metronomic scheduling of poorly soluble and permeable drugs. In this review, we talked briefly about the techniques used to create, characterize, and tailor chitosan-based NPs; and delved deeper into the potential applications of folate-engineered chitosan NPs in treating various cancer types.

Spray-dried pH-sensitive chitosan microparticles loaded with Mycobacterium bovis BCG intended for supporting treatment of Helicobacter pylori infection

Gram-negative spiral-shaped Helicobacter pylori (Hp) bacteria induce the development of different gastric disorders. The growing resistance of Hp to antibiotics prompts to search for new therapeutic formulations. A promising candidate is Mycobacterium bovis BCG (BCG) with immunomodulatory properties. Biodegradable mucoadhesive chitosan is a good carrier for delivering BCG mycobacteria to the gastric mucosal environment. This study aimed to show whether BCG bacilli are able to increase the phagocytic activity of Cavia porcellus-guinea pig macrophages derived from the bone marrow towards fluorescently labeled Escherichia coli. Furthermore, to encapsulate live BCG bacilli, in spray-dried chitosan microparticles (CHI-MPs), and assess the pH-dependent release of mycobacteria in pH conditions mimicking gastric (acidic) or gut (alkaline) milieu. Microparticles (MPs) were made of chitosan and coated with Pluronic F-127-(Plur) or N-Acetyl-D-Glucosamine-(GlcNAc) to increase the MPs resistance to low pH or to increase anti-Hp effect, respectively. Spray-drying method was used for microencapsulation of live BCG. The biosafety of tested CHI-MPs has been confirmed using cell models in vitro and the model of guinea pig in vivo. The CHI-MPs loaded with BCG released live mycobacteria at pH 3.0 (CHI-GlcNAc-MPs) or pH 8.0. (CHI-Plur-MPs). The CHI-MPs loaded with live BCG can be used for per os inoculation of Cavia porcellus to check the effectiveness of delivered mycobacteria in increasing anti-H. pylori host response.

Review of polysaccharide particle-based functional drug delivery

This review investigates the significant role polysaccharide particles play in functional drug delivery. The importance of these systems is due to the wide variety of polysaccharides and their natural source meaning that they can provide biocompatible and biodegradable systems with a range of both biological and chemical functionality valuable for drug delivery. This functionality includes protection and presentation of working therapeutics through avoidance of the reticuloendothelial system, stabilization of biomacromolecules and increasing the bioavailability of incorporated small molecule drugs. Transport of the therapeutic is also key to the utility of polysaccharide particles, moving drugs from the site of administration through mucosal binding and transport and using chemistry, size and receptor mediated drug targeting to specific tissues. This review also scrutinizes the methods of synthesizing and constructing functional polysaccharide particle drug delivery systems that maintain and extend the functionality of the natural polysaccharides.

Evaluation of hyaluronic acid-combined ternary complexes for serum-resistant and targeted gene delivery system

Branched polyethylenimine (bPEI) was well known as high transfection agent, which has many amine group. However, utilization of bPEI was limited due to high toxicity. To solve these problems, bPEI was introduced to low molecular weight water-soluble chitosan (LMWSC) with coupling agent. In addition, hyaluronic acid (HA), one of natural anion polymer, was introduced to binary complex of pDNA/bPEI-grafted LMWSC (LMPEI) to target the specific cancer cell and impart the serum resistant. Ternary complexes of pDNA/LMPEI/HA were prepared by electrostatic charge interaction and their binding affinity and DNase protection assay were conducted by gel retardation assay. Particle size of ternary complexes showed that had each 482 ± 245.4 (pDNA/LMPEI2%/HA, 1:16:1, w/w/w) and 410 ± 78.5 nm (pDNA/LMPEI4%/HA, 1:16:2, w/w/w). Moreover, to demonstrate serum-resistant effect of ternary complexes, particle size of them was measured according to incubated time (0-10 h) under serum condition. Transfection assay of ternary complexes showed that their transfection efficiency in CD44-receptor overexpressed HCT116 cell was higher than CD44-receptor negative CT26 cell. Additionally, intracellular uptake of ternary complexes with propidium iodide (PI)-labeled pDNA was observed to confirm targeting effect and cellular internalization by fluorescence microscopy. These results suggest that ternary complexes are superb gene carrier with excellent serum-resistant and high gene transfection.

Targeted DNA delivery to cancer cells using a biotinylated chitosan carrier

A novel biotinylated chitosan-graft-polyethyleneimine (Bio-Chi-g-PEI) copolymer was synthesized and evaluated as a nonviral gene delivery carrier for improvement of the transfection efficiency, endosomal escape, and targeted gene delivery of a plasmid encoding green fluorescent protein N1 (pEGFP-N1) into two different biotin-overexpressing cell lines including HeLa and OVCAR-3 cells. The structure of the obtained copolymers was confirmed by ¹ H nuclear magnetic resonance (¹ H NMR) and Fourier transform infrared spectroscopy. Physicochemical properties of the Bio-Chi-g-PEI/plasmid DNA (pDNA) complexes such as complex stability, size, zeta potential, and their morphology were investigated at various weight ratios of copolymer to pDNA. Bio-Chi-g-PEI copolymers could effectively condense pDNA into small particles with average diameters less than 164 nm and the zeta potential of +34.8 mV at the N/P ratio of 40/1. As revealed by flow cytometry, Bio-Chi-g-PEI/pDNA complexes had lower cytotoxicity than that of PEI 25 kDa/pDNA complexes in both cell lines. In vitro experiments revealed that the Bio-Chi-gPEI/pDNA complexes not only had much lower cytotoxicity, but also displayed higher transfection efficiency than that of PEI 25kDa/pDNA complexes. High percentage of cancer cells was successfully transfected by Bio-Chi-g-PEI/pDNA and properly expressed GFP protein. This study indicates that this copolymer complex can be a promising gene delivery carrier.

Aerosol delivery of biocompatible dihydroergotamine-loaded PLGA-PSPE polymeric micelles for efficient lung cancer therapy

Safe and efficient drug delivery systems have received great attention for cancer therapy due to their enhanced cancer-targeting efficiency and reduced undesirable side effects.

Aerosol Delivery of siRNA to the Lungs. Part 2: Nanocarrier-based Delivery Systems

In this article, applications of engineered nanoparticles containing siRNA for inhalation delivery are reviewed and discussed. Diseases with identified protein malfunctions may be mitigated through the use of well-designed siRNA therapeutics. The inhalation route of administration provides local delivery of siRNA therapeutics to the lungs for various pulmonary diseases. A siRNA delivery system can be used to overcome the barriers of pulmonary delivery, such as anatomical barriers, mucociliary clearance, cough clearance, and alveolar macrophage clearance. Apart from naked siRNA aerosol delivery, previously studied siRNA carrier systems include those of lipidic, polymeric, peptide, or inorganic origin. These delivery systems can achieve pulmonary delivery through the generation of an aerosol via an inhaler or nebulizer. The preparation methodologies for these siRNA nanocarrier systems will be discussed herein. The use of inhalable nanocarrier siRNA delivery systems have barriers to their effective delivery, but overcoming these constraints while formulating a safe and effective delivery system will offer unique advances to the field of inhaled medicine.

Gene therapy for bone tissue engineering

Gene therapy holds a great promise and has been extensively investigated to improve bone formation and regeneration therapies in bone tissue engineering. A variety of osteogenic genes can be delivered by combining different vectors (viral or non-viral), scaffolds and delivery methodologies. Ex vivo & in vivo gene enhanced tissue engineering approaches have led to successful osteogenic differentiation and bone formation. In this article, we review recent advances of gene therapy-based bone tissue engineering discussing strengths and weaknesses of various strategies as well as general overview of gene therapy.

Cationic dendronization of amylose via click chemistry for complexation and transfection of plasmid DNA

For the development of effective and safe gene carrier based on starch, the amylose from potato starch was azidized by reacting with 3-azidopropylamine in the presence of N, N'-carbonyldiimidazole and then conjugated with propargyl focal point poly(amidoamine) (PAMAM) dendrons by a Cu(I)-catalyzed azide-alkyne cycloaddition. Such a cationic dendronization was verified by Fourier transform infrared spectroscopy and proton nuclear magnetic resonance analyses. For the resultant amylose conjugates with various contents and generations of PAMAM dendron, their buffering capacity, binding ability with plasmid DNA and in vitro cytotoxicity were investigated. These amylose conjugates were found to exhibit good buffering capacity and biocompatibility. In particular, they could condense effectively plasmid DNA into the nanocomplexes, as confirmed by agarose gel electrophoresis, zeta potential, and particle size analyses as well as transmission electron microscopy observation. For their nanocomplexes with plasmid DNA, the in vitro transfection properties in human embryonic kidney 293T cells were studied by fluorescence microscopy and flow cytometry. It was found that the transfection efficiency could be optimized by the dendronization extent of amylose and the complexation extent of dendronized amylose with plasmid DNA.

The effect of ethylene oxide sterilization on the surface chemistry and in vitro cytotoxicity of several kinds of chitosan

The surfaces of three chitosan samples, differing only in their degrees of deacetylation and of carboxyethyl chitosan were chemically characterized by X-ray photoelectron spectroscopy, time-of-flight secondary ion mass spectroscopy, X-ray diffraction, and Fourier transform infrared, both before and after sterilization with ethylene oxide. Unexpected elemental ratios suggest that surface chemical modification occurred during the processing of the original chitin, with further surface modification on subsequent sterilization, despite previous reports to the contrary. Cell viability was evaluated by direct contact methyl thiazole tetrazolium and lactate dehydrogenase assays between the chitosan particles and A549 human epithelial cells, which demonstrated that the modifications incurred on sterilization are reflected in biocompatibility changes. All the samples were found to be biocompatible and nontoxic before sterilization and remained so subsequently.

A novel potential biocompatible hyperbranched polyspermine for efficient lung cancer gene therapy

The clinical successful application of gene therapy critically depends upon the development of non-toxic and efficient delivery system. Although polycationic non-viral vectors hold great promise in nanomedicine, the exploring of application in clinics still remains a big challenge. To develop a non-toxic and efficient non-viral gene delivery system, two kinds of endogenous substance, citric acid (CA) and spermine (SPE), were used to prepare a new low charge density hyperbranched polyspermine (HPSPE) by one-pot polymerization. The biocompatibility evaluated by hemolytic activity and red blood cell (RBC) aggregation indicated that HPSPE was highly biocompatible without causing hemolysis and RBC aggregation compared with PEI as well as SPE. The MTS assay also demonstrated that the cell viability of HPSPE was above 90% even at 200 μg/mL at different time (24 and 72 h), which much higher than PEI 25K. Besides, HPSPE showed high transfection efficiency without any toxic effect after aerosol delivery to the mice. Moreover, aerosol delivery of HPSPE/Akt1 shRNA significantly reduced tumor size and numbers and efficiently suppressed lung tumorigenesis ultimately in K-ras(LA1) lung cancer model mice. These results suggest that low charge density as well as endogenous substance skeleton endow HPSPE with great potential for toxicity-free and efficient gene therapy.

Star-shaped tetraspermine enhances cellular uptake and cytotoxicity of T-oligo in prostate cancer cells

PURPOSE

An oligonucleotide termed 'T-oligo' having sequence homology with telomere overhang has shown cytotoxicity in multiple cancers. We have demonstrated that T-oligo can induce apoptosis in androgen independent prostate cancer cell line DU-145. In this report, we evaluate the use of star-shaped tetraspermine (SSTS) for delivery of T-oligo.

METHODS

SSTS was synthesized from spermine and its intrinsic cytotoxicity towards DU-145 cells was compared with spermine and branched polyethyleneimine (bPEI). Atomistic molecular dynamic (MD) simulations were conducted to understand binding and complexation of spermine and SSTS with T-oligo. Complexation was also determined using gel electrophoresis and SYBR gold assay. Complexes were characterized for size, cellular uptake and antiproliferative effect.

RESULTS

SSTS exhibited significantly lower toxicity than spermine and bPEI. Its affinity towards T-oligo was significantly higher than spermine as determined by experimental studies and confirmed by MD simulations and it formed stable complexes (TONPs) with T-oligo. TONPs facilitated cellular uptake and nuclear accumulation of T-oligo and their cytotoxic potential was observed at concentration several folds lower than that required for T-oligo alone.

CONCLUSION

SSTS significantly enhanced therapeutic benefits associated with the use of T-oligo and can be developed as a delivery vehicle for its in-vivo therapeutic applications.

siRNA delivery to the lung: what's new?

RNA interference (RNAi) has been thought of as the general answer to many unmet medical needs. After the first success stories, it soon became obvious that short interfering RNA (siRNA) is not suitable for systemic administration due to its poor pharmacokinetics. Therefore local administration routes have been adopted for more successful in vivo RNAi. This paper reviews nucleic acid modifications, nanocarrier chemistry, animal models used in successful pulmonary siRNA delivery, as well as clinical translation approaches. We summarize what has been published recently and conclude with the potential problems that may still hamper the efficient clinical application of RNAi in the lung.

Design of chitosan-based nanoformulations for efficient intracellular release of active compounds

The use of chitosan-based nanocarriers to transport active compounds gained an increasing attention in drug delivery. Intracellular delivery, with efficient intracellular release, become an important design considerations in chitosan based nanoformlations. Internal stimuli-responsive nanoformulations are designed to release active compounds after internalization based on certain internal stimuli like pH, redox potential and enzymes. Futhermore, nondestructive pathways may provide a nondigestive compartment for active compounds transport, which can protect the encapsulated agents from possible lysosomal degradation, thereby realizing release agents safely. This review gives a brief overview about the chitosan-based nanoformulations for efficient intracellular cargo release, including internal stimuli-responsive nanoformulations and nondestructive pathways based nanoformulations: design strategies and applications. The present problems and a possible future perspective related them are also discussed.

Influence of oligospermines architecture on their suitability for siRNA delivery

Spermines are naturally abundant polyamines that partially condense nucleic acids and exhibit the proton-sponge effect in an acidic environment. However, spermines show a limited efficiency for transfecting nucleic acids because of their low molecular weight. Therefore, spermines need to be modified to be used as nonviral vectors for nucleic acids. Here, we synthesized linear bisspermine as well as a linear and dendritic tetraspermine with different molecular architectures. These oligospermines were self-assembled into polyplexes with siRNA. The structure–activity relationship of the oligospermines was evaluated in terms of their efficiency for delivering siRNA into a nonsmall cell lung carcinoma cell line. Oligospermines displayed minimal cytotoxicity but efficient siRNA condensation and showed better stability against polyanions than polyethylenimine. The morphology of the polyplexes was strongly affected by the oligospermine architecture. Linear tetraspermine/siRNA polyplexes showed the best gene-silencing efficiency among the oligospermines tested at both the mRNA and protein expression levels, indicating the most favorable structure for siRNA delivery.

The effect of ethylene oxide sterilization on the surface chemistry and in vitro cytotoxicity of several kinds of chitosan

The surfaces of three chitosan samples, differing only in their degrees of deacetylation and of carboxyethyl chitosan were chemically characterized by X-ray photoelectron spectroscopy, time-of-flight secondary ion mass spectroscopy, X-ray diffraction, and Fourier transform infrared, both before and after sterilization with ethylene oxide. Unexpected elemental ratios suggest that surface chemical modification occurred during the processing of the original chitin, with further surface modification on subsequent sterilization, despite previous reports to the contrary. Cell viability was evaluated by direct contact methyl thiazole tetrazolium and lactate dehydrogenase assays between the chitosan particles and A549 human epithelial cells, which demonstrated that the modifications incurred on sterilization are reflected in biocompatibility changes. All the samples were found to be biocompatible and nontoxic before sterilization and remained so subsequently. © 2013 Wiley Periodicals, Inc. J Biomed Mater Res Part B: Appl Biomater, 2013.

Biocompatibility of chitosan carriers with application in drug delivery

Chitosan is one of the most used polysaccharides in the design of drug delivery strategies for administration of either biomacromolecules or low molecular weight drugs. For these purposes, it is frequently used as matrix forming material in both nano and micron-sized particles. In addition to its interesting physicochemical and biopharmaceutical properties, which include high mucoadhesion and a great capacity to produce drug delivery systems, ensuring the biocompatibility of the drug delivery vehicles is a highly relevant issue. Nevertheless, this subject is not addressed as frequently as desired and even though the application of chitosan carriers has been widely explored, the demonstration of systems biocompatibility is still in its infancy. In this review, addressing the biocompatibility of chitosan carriers with application in drug delivery is discussed and the methods used in vitro and in vivo, exploring the effect of different variables, are described. We further provide a discussion on the pros and cons of used methodologies, as well as on the difficulties arising from the absence of standardization of procedures.

Use of biotinylated chitosan for substrate-mediated gene delivery

To improve transfection efficiency of nonviral vectors, biotinylated chitosan was applied to complex with DNA in different N/P ratios. The morphologies and the sizes of formed nanoparticles were suitable for cell uptake. The biotinylation decreased the surface charges of nanoparticles and hence reduced the cytotoxicity. The loading capacities of chitosan were slightly decreased with the increase of biotinylation, but most of the DNA molecules were still complexed. Using different avidin-coated surfaces, the interaction between biotinylated nanoparticles to the substrate may be manipulated. The in vitro transfection results demonstrated that biotinylated nanoparticles may be bound to avidin coated surfaces, and the transfection efficiencies were thus increased. Through regulating the N/P ratio, biotinylation levels, and surface avidin, the gene delivery can be optimized. Compared to the nonmodified chitosan, biotinylated nanoparticles on biomaterial surfaces can increase their chances to contact adhered cells. This spatially controlled gene delivery improved the gene transfer efficiency of nonviral vectors and could be broadly applied to different biomaterial scaffolds for tissue engineering applications.

Suppression of lung cancer progression by biocompatible glycerol triacrylate-spermine-mediated delivery of shAkt1

BACKGROUND

Polyethylenimine (PEI)-based nonviral gene-delivery systems are commonly employed because of their high transfection efficiency. However, the toxic nature of PEI is a significant obstacle in clinical gene therapy. In this study, we developed biocompatible glycerol triacrylate-spermine (GT-SPE) polyspermine as a nanosized gene carrier for potential lung cancer gene therapy.

METHODS

The GT-SPE was synthesized using the Michael addition reaction between GT and SPE. The molecular weight was characterized using gel permeability chromatography multiangle laser light scattering and the composition of the polymer was analyzed using proton nuclear magnetic resonance.

RESULTS

The GT-SPE successfully protected the DNA from nucleases. The average particle size of the GT-SPE was 121 nm with a zeta potential of +23.45 mV. The GT-SPE was found to be less toxic than PEI for various cell lines, as well as for a murine model. Finally, our results showed that the GT-SPE/small hairpin Akt1 (shAkt1) complex suppressed lung tumorigenesis in a K-ras(LA1) lung cancer mice model by inducing apoptosis through the Akt signaling pathway and cell cycle arrest. Aerosol delivered GT-SPE/shAkt1, which reduced matrix metalloproteinase-9 activity and suppressed the expression levels of proliferating cell nuclear antigen, as well as vascular endothelial growth factors and CD31, which are known proliferation and angiogenesis markers, respectively.

CONCLUSION

Our data suggest that GT-SPE may be a candidate for short hairpin-shaped RNA-based aerosol lung cancer gene therapy.

Suppression of tumor growth in H-ras12V liver cancer mice by delivery of programmed cell death protein 4 using galactosylated poly(ethylene glycol)-chitosan-graft-spermine

Non-viral gene delivery systems based on polyethyleneimine (PEI) are efficient due to their proton-sponge effect within endosomes, but they have poor physical characteristics such as slow dissociation, cytotoxicity, and non targeted gene delivery. To overcome many of the problems associated with PEI, we synthesized a galactosylated poly(ethylene glycol)-chitosan-graft-spermine (GPCS) copolymer with low cytotoxicity and optimal gene delivery to hepatocytes using an amide bond between galactosylated poly(ethylene glycol) and chitosan-graft-spermine. The GPCS copolymer formed complexes with plasmid DNA, and the GPCS/DNA complexes had well-formed spherical shapes. The GPCS/DNA complexes were nanoscale size with homogenous size distribution and a positive zeta potential by dynamic light scattering (DLS). The GPCS copolymer had lower cytotoxicity than that of PEI 25K in HepG2, HeLa, and A549 cell lines at various concentrations and showed good hepatocyte-targeting ability. Furthermore, GPCS/DNA complexes showed higher levels of GFP expression in the liver in model mice after intravenous injection than naked DNA and metoxy-poly(ethylene glycol)-chitosan-graft-spermine as controls without remarkable fibrosis, inflammation, lipidosis, or necrosis. In a tumor suppression study, an intravenous injection of the GPCS/Pdcd4 complexes significantly suppressed tumor growth, activated apoptosis, and suppressed proliferation and angiogenesis in liver tumor-bearing H-ras12V mice. Our results indicate that the GPCS copolymer has potential as a hepatocyte-targeting gene carrier.