Effect of drug solubility and lipid carrier on drug release from lipid nanoparticles for dermal delivery

Construction of various lipid carriers to study the transdermal penetration mechanism of sinomenine hydrochloride

OBJECTIVE

To investigate the transdermal mechanisms and compare the differences in transdermal delivery of Sinomenine hydrochloride (SN) between solid lipid nanoparticles (SLN), liposomes (LS), and nanoemulsions (NE).

METHODS

SN-SLN, SN-LS and SN-NE were prepared by ultrasound, ethanol injection and spontaneous emulsification, respectively. FTIR, DSC, in vitro skin penetration, activation energy (Ea) analysis were used to explore the mechanism of drug penetration across the skin.

RESULTS

The particle size and encapsulation efficiency were 126.60 nm, 43.23 ± 0.48%(w/w) for SN-SLN, 224.90 nm, 78.31 ± 0.75%(w/w) for SN-LS, and 83.22 nm, 89.01 ± 2.16%(w/w) for SN-LS. FTIR and DSC showed the preparations had various levels of impacts on the stratum corneum's lipid structure which was in the order of SLN > NE > LS. Ea values of SN-SLN, SN-LS, and SN-NE crossing the skin were 2.504, 1.161, and 2.510 kcal/mol, respectively.

CONCLUSION

SLN had a greater degree of alteration on the skin cuticle, which allows SN to permeate skin more effectively.

Drug Release from Lipid Microparticles-Insights into Drug Incorporation and the Influence of Physiological Factors

The aim of this study was to assess the impact of physiological factors, namely tear fluid and lysozyme enzyme, as well as surfactant polysorbate, on the release profile from solid lipid microparticles (SLM), in the form of dispersion intended for ocular application. Indomethacin (Ind) was used as a model drug substance and a release study was performed by applying the dialysis bag method. Conducting release studies taking into account physiological factors is expected to improve development and screening studies, as well as support the regulatory assessment of this multi-compartment lipid dosage form. The effect of the lysozyme was directly related to its effect on lipid microparticles, as it occurred only in their presence (no effect on the solubility of Ind). Polysorbate also turned out to be an important factor interacting with the SLM surface, which determined the release of Ind from SLM. However, in study models without tear fluid or lysozyme, the release of Ind did not exceed 60% within 96 h. Ultimately, only the simultaneous application of artificial tear fluid, lysozyme, and polysorbate allowed for the release of 100% of Ind through the SLM dispersion. The examination of the residues after the release studies indicated the possibility of releasing 100% of Ind from SLM without complete degradation of the microparticles' matrix. The incubation of SLM with tear fluid confirmed a similar influence of physiological factors contained in tear fluid on the surface structure of SLM as that observed during the in vitro studies.

Development of solid lipid microparticles (SLMs) containing asiatic acid for topical treatment of acne: Characterization, stability, in vitro and in vivo anti-acne assessment

Solid lipid microparticles (SLMs) represent a promising approach for drug delivery in anti-acne applications. In this study, asiatic acid-loaded SLMs (AASLMs) were prepared by melt emulsification method in conjunction with freeze-drying. Comprehensive evaluations comprised particle size, %entrapment efficiency (%EE), %labeled amount (%LA), surface morphology, stability, %release, %skin permeation, and anti-acne activity. The AASLMs exhibited an average particle size ranging from 7.46 to 38.86 µm, with %EE and %LA falling within the range of 31.56 to 100.00 and 90.43 to 95.38, respectively. The AASLMs demonstrated a spherical shape under scanning electron microscopy, and maintained stability over a 3-month period. Notably, formulations with 10 % and 15 % cetyl alcohol stabilized with poloxamer-188 (specifically F6 and F12) displayed a minimum inhibitory concentration (MIC) value of 75 mg/ml against Cutibacterium acnes. Furthermore, F12 exhibited a higher %release and %skin permeation compared to F6 over 24 h. In a single-blind clinical trial involving fifteen participants with mild-to-moderate acne, F12 showcased its potential not only in reducing porphyrin intensity and enhancing skin barriers but also in significantly improving skin hydration and brightness. However, further investigations with larger subject cohorts encompassing diverse age groups and genders are necessary to thoroughly establish the performance of the developed AASLMs.

Medium-Chain Triacylglycerols (MCTs) and Their Fractions in Drug Delivery Systems : A Systematic Review

Medium-chain triacylglycerol (MCT) is a type of triacylglycerol that has six or seven to twelve carbon chains. It consists of three molecules of fatty acids attached to one molecule of glycerol. Drug delivery system (DDS) is defined as a formulation to distribute drugs into the human body. The unique properties of MCTs have garnered interest in using them as excipients in DDS. Even though there are many significant effects attributed to the use of MCTs, especially in modulating the rate of drug delivery in various DDS, they are all limited and intermittent. This warrants a detailed summary of the previous studies on the use of MCTs in various DDS. Therefore, this review focuses on presenting a systematic review of previous studies on the use of MCTs in the last six years and explores the types and effects of MCTs on DDS that employ various types of delivery routes. A systematic search through PubMed, Science Direct and Scopus was performed. Keywords like "medium-chain triglycerides", "medium-chain fatty acids", "medium-chain triglycerides and their fractions", "medium-chain fatty acids and their fractions", "MCTs", "MCFA", "in drug delivery", "in drug delivery system" and their combinations were used. The synonyms of the words were also used to extend the search. A total of 17 articles that met the inclusion criteria were identified. Findings from this review have identified the several MCTs and their fractions used in DDS that employed the oral/enteral, topical, transdermal, parenteral, and pulmonary routes of drug delivery. The review also highlights that the usage of MCTs in DDS results in a better transportation of drugs into the human body.

Nanostructured lipid carriers loaded into in situ gels for breast cancer local treatment

In this study, nanostructured lipid carriers (NLC) were developed and employed to obtain in situ thermosensitive formulations for the ductal administration and prolonged retention of drugs as a new strategy for breast cancer local treatment. NLC size was influenced by the type and concentration of the oil phase, surfactants, and drug incorporation, ranging from 221.6 to 467.5 nm. The type of liquid lipid influenced paclitaxel and 5-fluorouracil cytotoxicity, with tributyrin-containing NLC reducing IC50 values by 2.0-7.0-fold compared to tricaprylin NLC in MCF-7, T-47D and MDA-MB-231 cells. In spheroids, the NLCs reduced IC50 compared to either drug solution (3.2-6.2-fold). Although a significant reduction (1.26 points, p < 0.001) on the health index of Galleria mellonella larvae was observed 5 days after NLC administration, survival was not significantly reduced. To produce thermosensitive gels, the NLCs were incorporated in a poloxamer (11 %, w/w) dispersion, which gained viscosity (2-fold) at 37 °C. After 24 h, ∼53 % of paclitaxel and 83 % of 5-fluorouracil were released from the NLC; incorporation in the poloxamer gel further prolonged release. Intraductal administration of NLC-loaded gel increased the permanence of hydrophilic (2.2-3.0-fold) and lipophilic (2.1-2.3-fold) fluorescent markers in the mammary tissue compared to the NLC (as dispersion) and the markers solutions. In conclusion, these results contribute to improving our understanding of nanocarrier design with increased cytotoxicity and prolonged retention for the intraductal route. Tributyrin incorporation increased the cytotoxicity of paclitaxel and 5-fluorouracil in monolayer and spheroids, while NLC incorporation in thermosensitive gels prolonged tissue retention of both hydrophilic and hydrophobic compounds.

Dually Active Apigenin-Loaded Nanostructured Lipid Carriers for Cancer Treatment

Purpose

Cancer is one of the major causes of death worldwide affecting more than 19 million people. Traditional cancer therapies have many adverse effects and often result in unsatisfactory outcomes. Natural flavones, such as apigenin (APG), have demonstrated excellent antitumoral properties. However, they have a low aqueous solubility. To overcome this drawback, APG can be encapsulated in nanostructured lipid carriers (NLC). Therefore, we developed dual NLC encapsulating APG (APG-NLC) with a lipid matrix containing rosehip oil, which is known for its anti-inflammatory and antioxidant properties.

Methods

Optimisation, physicochemical characterisation, biopharmaceutical behaviour, and therapeutic efficacy of this novel nanostructured system were assessed.

Results

APG-NLC were optimized obtaining an average particle size below 200 nm, a surface charge of -20 mV, and an encapsulation efficiency over 99%. The APG-NLC released APG in a sustained manner, and the results showed that the formulation was stable for more than 10 months. In vitro studies showed that APG-NLC possess significant antiangiogenic activity in ovo and selective antiproliferative activity in several cancer cell lines without exhibiting toxicity in healthy cells.

Conclusion

APG-NLC containing rosehip oil were optimised. They exhibit suitable physicochemical parameters, storage stability for more than 10 months, and prolonged APG release. Moreover, APG-NLC were internalised inside tumour cells, showing the capacity to cause cytotoxicity in cancer cells without damaging healthy cells.

pH-Responsive Nano-transferosomes of Purpurin-18 Sodium Salt and Doxorubicin for Enhanced Anticancer Efficiency by Photodynamic and Chemo Combination Therapy

Cancer is a devastating disease and a major human health concern. Various combination treatments have been developed to combat cancer. To obtain superior cancer therapy, the objective of this study was to synthesize purpurin-18 sodium salt (P18Na) and design P18Na- and doxorubicin hydrochloride (DOX)-loaded nano-transferosomes as a combination of photodynamic therapy (PDT) and chemotherapy for cancer. The characteristics of P18Na- and DOX-loaded nano-transferosomes were assessed, and the pharmacological efficacy of P18Na and DOX was determined using the HeLa and A549 cell lines. The nanodrug delivery system characteristics of the product were found to range from 98.38 to 217.50 nm and -23.63 to -41.10 mV, respectively. Further, the release of P18Na and DOX from nano-transferosomes exhibited a sustained pH-responsive behavior and burst in physiological and acidic environments, respectively. Accordingly, the nano-transferosomes effectively delivered P18Na and DOX into cancer cells, with less leakage in the body, and exhibited pH-responsive release in cancer cells. A photo-cytotoxicity study to HeLa and A549 cell lines revealed a size-dependent anti-cancer effect. These results suggest that the combined nano-transferosomes of P18Na and DOX are effective in the combination of PDT and chemotherapy for cancer.

Solid Lipid Nanoparticles (SLN) and Nanostructured Lipid Carriers (NLC) Prepared by Microwave and Ultrasound-Assisted Synthesis: Promising Green Strategies for the Nanoworld

Many pharmaceutically active molecules are highly lipophilic, which renders their administration and adsorption in patients extremely challenging. Among the countless strategies to overcome this problem, synthetic nanocarriers have demonstrated superb efficiency as drug delivery systems, since encapsulation can effectively prevent a molecules' degradation, thus ensuring increased biodistribution. However, metallic and polymeric nanoparticles have been frequently associated with possible cytotoxic side effects. Solid lipid nanoparticles (SLN) and nanostructured lipid carriers (NLC), which are prepared with physiologically inert lipids, therefore emerged as an ideal strategy to bypass toxicities issues and avoid the use of organic solvents in their formulations. Different approaches to preparation, using only moderate amounts of external energy to facilitate a homogeneous formation, have been proposed. Greener synthesis strategies have the potential to provide faster reactions, more efficient nucleation, better particle size distribution, lower polydispersities, and furnish products with higher solubility. Particularly microwave-assisted synthesis (MAS) and ultrasound-assisted synthesis (UAS) have been utilized in the manufacturing of nanocarrier systems. This narrative review addresses the chemical aspects of those synthesis strategies and their positive influence on the characteristics of SLNs and NLCs. Furthermore, we discuss the limitations and future challenges for the manufacturing processes of both types of nanoparticles.

Diffusion Analysis of NAnoscopic Ensembles: A Tracking-Free Diffusivity Analysis for NAnoscopic Ensembles in Biological Samples and Nanotechnology

The rapid development of microscopic techniques over the past decades enables the establishment of single molecule fluorescence imaging as a powerful tool in biological and biomedical sciences. Single molecule fluorescence imaging allows to study the chemical, physicochemical, and biological properties of target molecules or particles by tracking their molecular position in the biological environment and determining their dynamic behavior. However, the precise determination of particle distribution and diffusivities is often challenging due to high molecule/particle densities, fast diffusion, and photobleaching/blinking of the fluorophore. A novel, accurate, and fast statistical analysis tool, Diffusion Analysis of NAnoscopic Ensembles (DANAE), that solves all these obstacles is introduced. DANAE requires no approximations or any a priori input regarding unknown system-inherent parameters, such as background distributions; a requirement that is vitally important when studying the behavior of molecules/particles in living cells. The superiority of DANAE with various data from simulations is demonstrated. As experimental applications of DANAE, membrane receptor diffusion in its natural membrane environment, and cargo mobility/distribution within nanostructured lipid nanoparticles are presented. Finally, the method is extended to two-color channel fluorescence microscopy.

Investigation of Cellular Interactions of Lipid-Structured Nanoparticles With Oral Mucosal Epithelial Cells

Lipid-based nanosystems enable intracellular delivery of drugs in the oral cavity for the treatment of local diseases. To rationally design such systems, suitable matrix compositions and particle properties need to be identified, and manufacturing technologies that allow reproducible production have to be applied. This is a prerequisite for the reliable and predictable performance of in-vitro biological studies. Here, we showed that solid lipid nanoparticles (SLN, palmitic acid) and nanostructured lipid carriers (NLC, palmitic acid and oleic acid in different ratios) with a size of 250 nm, a negative zeta potential, and a polydispersity index (PdI) of less than 0.3 can be reproducibly prepared by high-pressure homogenization using quality by design and a predictive model. SLN and NLC were colloidally stable after contact with physiological fluid and did not form agglomerates. The in-vitro studies clearly showed that besides particle size, surface charge and hydrophobicity, matrix composition had a significant effect. More specifically, the addition of the liquid lipid oleic acid increased the cellular uptake capacity without changing the underlying uptake mechanism. Regardless of the matrix composition, caveolin-mediated endocytosis was the major route of uptake, which was confirmed by particle localization in the endoplasmic reticulum. Thus, this work provides useful insights into the optimal composition of lipid carrier systems to enhance the intracellular uptake capacity of drugs into the oral mucosa.

Synthesis and Design of Purpurin-18-Loaded Solid Lipid Nanoparticles for Improved Anticancer Efficiency of Photodynamic Therapy

Purpurin-18 (P18) is one of the essential photosensitizers used in photodynamic therapy (PDT), but its hydrophobicity causes easy coalescence and poor bioavailability. This study aimed to synthesize P18 and design P18-loaded solid lipid nanoparticles (SLNs) to improve its bioavailability. The characteristics of the synthesized P18 and SLNs were evaluated by particle characteristics and release studies. The effects of P18 were evaluated using the 1,3-diphenylisobenzofuran (DPBF) assay as a nonbiological assay and a phototoxicity assay against HeLa and A549 cell lines as a biological assay. The mean particle size and zeta potential of the SLNs were 164.70–762.53 nm and −16.77–25.54 mV, respectively. These results indicate that P18-loaded SLNs are suitable for an enhanced permeability and retention effect as a passive targeting anti-cancer strategy. The formulations exhibited a burst and sustained release based on their stability. The DPBF assay indicated that the PDT effect of P18 improved when it was entrapped in the SLNs. The photocytotoxicity assay indicated that P18-loaded SLNs possessed light cytotoxicity but no dark cytotoxicity. In addition, the PDT activity of the formulations was cell type- and size-dependent. These results suggest that the designed P18-loaded SLNs are a promising tool for anticancer treatment using PDT.

Rationale utilization of phospholipid excipients: a distinctive tool for progressing state of the art in research of emerging drug carriers

Phospholipids have a high degree of biocompatibility and are deemed ideal pharmaceutical excipients in the development of lipid-based drug delivery systems, because of their unique features (permeation, solubility enhancer, emulsion stabilizer, micelle forming agent, and the key excipients in solid dispersions) they can be used in a variety of pharmaceutical drug delivery systems, such as liposomes, phytosomes, solid lipid nanoparticles, etc. The primary usage of phospholipids in a colloidal pharmaceutical formulation is to enhance the drug's bioavailability with low aqueous solubility [i.e. Biopharmaceutical Classification System (BCS) Class II drugs], Membrane penetration (i.e. BCS Class III drugs), drug uptake and release enhancement or modification, protection of sensitive active pharmaceutical ingredients (APIs) from gastrointestinal degradation, a decrease of gastrointestinal adverse effects, and even masking of the bitter taste of orally delivered drugs are other uses. Phospholipid-based colloidal drug products can be tailored to address a wide variety of product requirements, including administration methods, cost, product stability, toxicity, and efficacy. Such formulations that are also a cost-effective method for developing medications for topical, oral, pulmonary, or parenteral administration. The originality of this review work is that we comprehensively evaluated the unique properties and special aspects of phospholipids and summarized how the individual phospholipids can be utilized in various types of lipid-based drug delivery systems, as well as listing newly marketed lipid-based products, patents, and continuing clinical trials of phospholipid-based therapeutic products. This review would be helpful for researchers responsible for formulation development and research into novel colloidal phospholipid-based drug delivery systems.

Formulation design, production and characterisation of solid lipid nanoparticles (SLN) and nanostructured lipid carriers (NLC) for the encapsulation of a model hydrophobic active

•

Lipid materials were chosen based on theoretical and experimental lipid screening.

•

SLNs and NLCs with high curcumin loading were produced using the selected lipids.

•

Nano-sized lipid particles fabricated by tuning the processing parameters.

•

Lipid matrix component compatibility affects thermal properties as shown by DSC.

•

Formation of distinct lipid structures in liquid lipid concentration-dependent manner.

Lipid nanoparticles have been widely investigated for their use as either carriers for poorly water soluble actives or as (Pickering) emulsion stabilisers. Recent studies have suggested that the fabrication of lipid nanostructures that can display both these performances concurrently, can enable the development of liquid formulations for multi-active encapsulation and release. Understanding the effects of different formulation variables on the microstructural attributes that underline both these functionalities is crucial in developing such lipid nanostructures. In this study, two types of lipid-based nanoparticles, solid lipid nanoparticles and nanostructured lipid carriers, were fabricated using varying formulation parameters, namely type of solid lipid, concentration of liquid lipid and type/concentration of surface active species. The impact of these formulation parameters on the size, thermal properties, encapsulation efficiency, loading capacity and long-term storage stability of the developed lipid systems, was studied. Preliminary lipid screening and processing conditions studies, focused on creating a suitable lipid host matrix of appropriate dimensions that could enable the high loading of a model hydrophobic active (curcumin). Informed by this, selected lipid nanostructures were then produced. These were characterised by encapsulation efficiency and loading capacity values as high as 99% and 5%, respectively, and particle dimensions within the desirable size range (100-200 nm) required to enable Pickering functionality. Compatibility between the lipid matrix components, and liquid lipid/active addition were shown to greatly influence the polymorphism/crystallinity of the fabricated particles, with the latter demonstrating a liquid lipid concentration-dependent behaviour. Successful long-term storage stability of up to 28 weeks was confirmed for certain formulations.

Oral administration of buparvaquone nanostructured lipid carrier enables in vivo activity against Leishmania infantum

Leishmaniasis, a neglected tropical disease, is prevalent in 98 countries with the occurrence of 1.3 million new cases annually. The conventional therapy for visceral leishmaniasis requires hospitalization due to the severe adverse effects of the drugs, which are administered parenterally. Buparvaquone (BPQ) showed in vitro activity against leishmania parasites; nevertheless, it has failed in vivo tests due to its low aqueous solubility. Though, lipid nanoparticles can overcome this holdback. In this study we tested the hypothesis whether BPQ-NLC shows in vivo activity against L. infantum. Two optimized formulations were prepared (V1: 173.9 ± 1.6 nm, 0.5 mg of BPQ/mL; V2: 232.4 ± 1.6 nm, 1.3 mg of BPQ/mL), both showed increased solubility up to 73.00-fold, and dissolution up to 83.29%, while for the free drug it was only 2.89%. Cytotoxicity test showed their biocompatibility (CC50 >554.4 µM). Besides, the V1 dose of 0.3 mg/kg/day for 10 days reduced the parasite burden in 83.4% ±18.2% (p <0.05) in the liver. BPQ-NLC showed similar leishmanicidal activity compared to miltefosine. Therefore, BPQ-NLC is a promising addition to the limited therapeutic arsenal suitable for leishmaniasis oral administration treatment.

Supramolecular lipid nanoparticles as delivery carriers for non-invasive cancer theranostics

Nanotheranostics is an emerging frontier of personalized medicine research particularly for cancer, which is the second leading cause of death. Supramolecular aspects in theranostics are quite allured to achieve more regulation and controlled features. Supramolecular nanotheranostics architecture is focused on engineering of modular supramolecular assemblies benefitting from their mutable and stimuli-responsive properties which confer an ultimate potential for the fabrication of unified innovative nanomedicines with controlled features. Amalgamation of supramolecular approaches to nano-based features further equip the potential of designing novel approaches to overcome limitations seen by the conventional theranostic strategies, for curing even the lethal diseases and endowing personalized therapeutics with optimistic prognosis, endorsing their clinical translation. Among many potential nanocarriers for theranostics, lipid nanoparticles (LNPs) have shown various promising advances in theranostics and their formulation can be tailored for several applications. Despite the great advancement in cancer nanotheranostics, there are still many challenges that need to be highlighted to fill the literature gap. For this purpose, herein, we have presented a systematic overview on the subject and proposed LNPs as the potential material to manage cancer via non-invasive approaches by highlighting the use of supramolecular approaches to make them robust for cancer theranostics. We have concluded the review by entailing the future perspectives of lipid nanotheranostics towards clinical translation.

Primaquine Loaded Solid Lipid Nanoparticles (SLN), Nanostructured Lipid Carriers (NLC), and Nanoemulsion (NE): Effect of Lipid Matrix and Surfactant on Drug Entrapment, in vitro Release, and ex vivo Hemolysis

Primaquine (PQ), an 8-aminoquinoline antimalarial drug, has been widely used for the eradication of hypnozoites from the liver and, therefore, recognized as the radical cure of malaria. However, the clinical applications of PQ are restricted to patients with glucose-6-phosphate dehydrogenase (G6PD) deficiency due to severe dose-related hemolytic side effects. Nanoparticle carriers have shown great potential in achieving higher PQ concentrations in the target site, thereby reducing dose-related systemic toxicity caused by non-specific exposure. This work aims to develop, compare, and evaluate three PQ-loaded lipid-based drug carriers including solid lipid nanoparticles (SLN), nanostructured lipid carriers (NLC), and nano-emulsions (NE). The optimized PQ-SLN, PQ-NLC, and PQ-NE had a particle size of 250 nm, a PDI range of 0.1 to 0.3, a zeta potential of - 30 mV, and entrapment efficiency of ~ 90%. All lipid formulations showed sustained release in both simulated gastric and intestinal fluids over 6 h. Four empirical models - including zero-order, Higuchi, Korsmeyer-Peppas, and Hixson-Crowell models - were tested to understand the drug release mechanisms of PQ-SLN, PQ-NLC, and PQ-NE. The model fitness was found to be the highest in the Korsmeyer-Peppas model for all the PQ-loaded lipid formulations (R²: 0.88-0.94). No significant changes were observed in the entrapment efficiency, particle size, and PDI of lipid formulations throughout 1 month of storage at 4 °C and 25 °C. PQ-SLN and PQ-NLC can be further lyophilized with cryoprotectants to improve long-term stability. Finally, the treatment of erythrocytes with PQ-SLN, PQ-NLC, and PQ-NE reduced erythrocyte hemolysis by approximately 4.5-fold compared to the free drug solution.

Physical properties of gold nanoparticles affect skin penetration via hair follicles

Drug penetration through the skin is significant for both transdermal and dermal delivery. One mechanism that has attracted attention over the last two decades is the transport pathway of nanoparticles via hair follicle, through the epidermis, directly to the pilosebaceous unit and blood vessels. Studies demonstrate that particle size is an important factor for drug penetration. However, in order to gain more information for the purpose of improving this mode of drug delivery, a thorough understanding of the optimal physical particle properties is needed. In this study, we fabricated fluorescently labeled gold nanoparticles (GNP) with a tight control over the size and shape. The effect of the particles' physical parameters on follicular penetration was evaluated histologically. We used horizontal human skin sections and found that the optimal size for polymeric particles is 0.25 μm. In addition, shape penetration experiments revealed gold nanostars' superiority over spherical particles. Our findings suggest the importance of the particles' physical properties in the design of nanocarriers delivered to the pilosebaceous unit.

Development and Characterization of Stingless Bee Propolis Properties for the Development of Solid Lipid Nanoparticles for Loading Lipophilic Substances

Stingless bees are insects which are popularly bred by agriculturists in the eastern region of Thailand for the pollination of their orchards. The products from stingless bee breeding include bee honey and bee propolis. The objective of this experiment is to study the possibility of developing stingless bee propolis wax into solid lipid nanoparticles (SLN) by the comparison of five surfactants (Brij 721, Cremophor WO 7, Myrj 52, Poloxamer 188, and Tween 80). Each surfactant is used at three concentrations: 10%, 20%, and 30%. A master formula is selected according to the following: physical features, particle size, zeta potential, and entrapment. The results showed that Brij 721 and Myri 52 at 20% can be used in preparing SLN and have good preservation properties for vitamin E (size: 451.2 nm and 416.8 nm, zeta potential: - 24.0 and - 32.7; % EE: 92.32% and 92.00%, resp.). Therefore, they are further developed by adding the following drugs at low solubility: curcumin, ibuprofen, and astaxanthin. It is found that a formula using the surfactants Brij 721 and Myrj 52 at 20% have similar drug entrapment. The entrapment study involves curcumin 82%, ibuprofen 40%, and astaxanthin 67%. Moreover, the cytotoxicity test of blank solid lipid nanoparticle found no toxicty in fibroblast cell line (CRL-2522). Therefore, from this study, it is determined that stingless bee propolis wax has the potential to be developed to provide more efficient SLN in the future.

A study to enhance the oral bioavailability of s-adenosyl-l-methionine (SAMe): SLN and SLN nanocomposite particles

The endogenous molecule, S-adenosyl-l-methionine (SAMe) is a key factor due to its role in the methylation cycle and modulation of monoaminergic neurotransmission. Since many mental disorders have linked to the monoaminergic system, the level of SAMe in blood and cerebrospinal fluid is important in the treatment of major depression. In this study, solid lipid nanoparticles (SLN) were prepared in order to increase the limited oral bioavailability of SAMe, and SLN based nanocomposite particles (SAMe-SLN-NC) were further developed using an enteric polymer for passive targeting of intestinal lymphatic system. In this manner, it was also aimed to protect SAMe loaded SLN from harsh gastric environment as well as hepatic first-pass metabolism. Dynamic light scattering (DLS) analysis of SLN was performed, drug content was measured, SAMe release patterns were examined and the permeation ability of SAMe was investigated by the Parallel Artificial Membrane Permeability Assay (PAMPA) to characterize SAMe loaded SLN formulation. According to the PAMPA results, SAMe-SLN with the average particle size of 242 nm showed enhanced SAMe permeability in comparison to pure drug. Delayed drug release obtained by SLN nanocomposite particles indicated the protection of drug-loaded SLN in the acidic gastric medium and their intact presence in the intestine. SAMe solution or particle suspensions were prepared using 0.45 (w/v) hydroxypropyl methylcellulose aqueous solution to be applied to groups of animals for pharmacokinetic studies. In vivo pharmacokinetic parameters revealed enhancement in relative bioavailability of SAMe upon oral administration of SLN based formulations. This was attributed to intact absorption of lipid matrix through lymphatic path. A statistically significant increase in SAMe plasma levels was obtained at 15th and 30th minutes with SAMe-SLN and at 2nd and 4th hours with SAMe-SLN-NC. Overall results suggest that SLN is a promising carrier to passive lymphatic targeting of SAMe and novel SLN nanocomposite particles which presented efficient oral bioavailability is a potential way for oral delivery of SAMe and treatment of major depression.

Mucoadhesive Poloxamer-Based Hydrogels for the Release of HP-β-CD-Complexed Dexamethasone in the Treatment of Buccal Diseases

Oral lichen planus (OLP) is an ongoing and chronic inflammatory disease affecting the mucous membrane of the oral cavity. Currently, the treatment of choice consists in the direct application into the buccal cavity of semisolid formulations containing a corticosteroid molecule to decrease inflammatory signs and symptoms. However, this administration route has shown various disadvantages limiting its clinical use and efficacy. Indeed, the frequency of application and the incorrect use of the preparation may lead to a poor efficacy and limit the treatment compliance. Furthermore, the saliva clearance and the mechanical stress present in the buccal cavity also involve a decrease in the mucosal exposure to the drug. In this context, the design of a new pharmaceutical formulation, containing a steroidal anti-inflammatory, mucoadhesive, sprayable and exhibiting a sustained and controlled release seems to be suitable to overcome the main limitations of the existing pharmaceutical dosage forms. The present work reports the formulation, optimization and evaluation of the mucoadhesive and release properties of a poloxamer 407 thermosensitive hydrogel containing a poorly water-soluble corticosteroid, dexamethasone acetate (DMA), threaded into hydroxypropyl-beta-cyclodextrin (HP-β-CD) molecules. Firstly, physicochemical properties were assessed to ensure suitable complexation of DMA into HP-β-CD cavities. Then, rheological properties, in the presence and absence of various mucoadhesive agents, were determined and optimized. The hydration ratio (0.218-0.191), the poloxamer 407 (15-17 wt%) percentage and liquid-cyclodextrin state were optimized as a function of the gelation transition temperature, viscoelastic behavior and dynamic flow viscosity. Deformation and resistance properties were evaluated in the presence of various mucoadhesive compounds, being the sodium alginate and xanthan gum the most suitable to improve adhesion and mucoadhesion properties. Xanthan gum was shown as the best agent prolonging the hydrogel retention time up to 45 min. Furthermore, xanthan gum has been found as a relevant polymer matrix controlling drug release by diffusion and swelling processes in order to achieve therapeutic concentration for prolonged periods of time.

Recent Progresses in Organic-Inorganic Nano Technological Platforms for Cancer Therapeutics

Nanotechnology offers promising tools in interdisciplinary research areas and getting an upsurge of interest in cancer therapeutics. Organic nanomaterials and inorganic nanomaterials bring revolutionary advancement in cancer eradication process. Oncology is achieving new heights under nano technological platform by expediting chemotherapy, radiotherapy, photo thermodynamic therapy, bio imaging and gene therapy. Various nanovectors have been developed for targeted therapy which acts as "Nano-bullets" for tumor cells selectively. Recently combinational therapies are catching more attention due to their enhanced effect leading towards the use of combined organicinorganic nano platforms. The current review covers organic, inorganic and their hybrid nanomaterials for various therapeutic action. The technological aspect of this review emphasizes on the use of inorganic-organic hybrids and combinational therapies for better results and also explores the future opportunities in this field.

Characterization and Systemic Delivery of Dibenzoylmethane via the Intranasal Route

Intranasal (IN) administration is known to be noninvasive with the potential to carry a drug or vaccine directly to the blood, bypassing first-pass metabolism in the liver and the harsh environment of the gastrointestinal system. Orally administered dibenzoylmethane (DBM) has been shown experimentally to be neuroprotective in animal models of tauopathy and prion disease and effective in the treatment of certain forms of cancers. The purpose of this study was to prepare, characterize, and test formulations of DBM designed for IN administration. DBM was formulated in brain homogenate (BH) and hypromellose and as nanoparticles (NPs). These formulations were detected using UPLC and characterized in solid and suspension states; NPs were also characterized by in vitro cell culture-based studies. Particle size for DBM NP was 163.8 ± 3.2 nm, and in vitro release studies showed 95.80% of DBM was released from the NPs within 8 days. In vitro cell, culture studies suggested no drug uptake until 6 h. A histological analysis of nasal cavity (NC) sections and blood detection studies were carried out 30 min after inhalation. DBM amounting to 40.77 ± 4.93 and 44.45 ± 5.36 ng/mL was detected in the blood of animals administered DBM in polymeric and NP formulation, respectively. Histological studies on NCs confirmed the presence of BH within lymphatic vessels in the lamina propria of each animal; BH was identified traversing the mucosa in 2 animals. Thus, formulations for DBM administered via IN route were successfully designed and characterized and able to cross the nasal mucosa following inhalation.

Preparation and characterization of dexamethasone lipid nanoparticles by membrane emulsification technique, use of self-emulsifying lipids as a carrier and stabilizer

Self-emulsifying lipids (SEL) were used as a stabilizer for the preparation of dexamethasone lipid nanoparticles by membrane emulsification employing Shirasu porous glass. The effect of process and formulation parameters on the size and polydispersity and dexamethasone solubility in lipids and its release from lipid nanoparticles were investigated. Lipid phase pressure (40-80 kPa), membrane pore-size (0.1 - 0.4 µm) and agitation speed (300 - 900 rpm) did not affect the size and polydispersity of SEL. However, the size was increased with increasing lipid content and fatty acid chain of the lipid. Sizes of < 250 nm were achieved from TEGO^® care:Gelucire^® blend and it increased to 487 nm by adding 20% w/w of hard fat. The highest solubility of dexamethasone was found in TEGO^® care 450 (29 mg/g). Release from the lipid nano-dispersions was extended with no burst effect and the absolute release was increased with increasing lipid content.

Potential of Nanoparticles as Permeation Enhancers and Targeted Delivery Options for Skin: Advantages and Disadvantages

The topical route of administration has many advantages for the treatment of various skin disorders as well as cosmeceutical purposes. This route bypasses hepatic first-pass effect and systemic availability of many pharmaceuticals is limited to skin organelles such as hair follicles and so could avoid unwanted adverse reactions and increase the localized therapeutic effect. Despite such attributed advantages of the topical route, the most important challenge is skin barrier characteristics that should be overcome to obtain dermal or trans-dermal drug delivery. Different approaches have been recruited to overcome this barrier. In this review, different types of nanoparticles for skin permeation enhancement and targeted delivery to skin organelles are discussed. The potential mechanisms of each nanocarrier in permeation enhancement and dermal delivery are considered and finally, the most important advantages and disadvantages of each group are summarized.

Analytical Techniques for the Assessment of Drug-Lipid Interactions and the Active Substance Distribution in Liquid Dispersions of Solid Lipid Microparticles (SLM) Produced de novo and Reconstituted from Spray-Dried Powders

Solid lipid microparticles (SLM) can be presented as liquid suspension or spray-dried powder. The main challenge in SLM technology is to precisely determine the location of the active substance (API) in the different compartments of the formulation and its changes during SLM processing. Therefore, the purpose of the research was to assess the distribution of the API and to investigate the nature of the API-lipid interaction when the formulation was subjected to spray drying, with an indication of the most suitable techniques for this purpose. SLM were prepared with two various lipids (Compritol or stearic acid) and two model APIs: cyclosporine (0.1% and 1% w/w) and spironolactone (0.1% and 0.5% w/w). Physicochemical characterizations of the formulations, before and after spray drying, were performed by differential scanning calorimetry (DSC), atomic force microscopy (AFM), Raman spectroscopy and nuclear magnetic resonance (NMR). The API distribution between the SLM matrix, SLM surface and the aqueous phase was determined, and the release study was performed. It was demonstrated that, in general, the spray drying did not affect the drug release and drug distribution; however, some changes were observed in the SLM with Compritol and when the API concentration was lower. Only in the SLM with stearic acid was a change in the DSC curves noted. Measurements with the AFM technique proved to be a useful method for detecting differences in the surface properties between the placebo and API-loaded SLM, while the Raman spectroscopy did not show such evident differences.

Nanocrystals for Improved Drug Delivery of Dexamethasone in Skin Investigated by EPR Spectroscopy

Nanocrystals represent an improvement over the traditional nanocarriers for dermal application, providing the advantages of 100% drug loading, a large surface area, increased adhesion, and the potential for hair follicle targeting. To investigate their advantage for drug delivery, compared to a base cream formulation, dexamethasone (Dx), a synthetic glucocorticoid frequently used for the treatment of inflammatory skin diseases, was covalently linked with the paramagnetic probe 3-(carboxy)-2,2,5,5-tetramethyl-1-pyrrolidinyloxy (PCA) to DxPCA. To investigate the penetration efficiency between these two vehicles, electron paramagnetic resonance (EPR) spectroscopy was used, which allows the quantification of a spin-labeled drug in different skin layers and the monitoring of the drug release. The penetration behavior in excised healthy and barrier-disrupted porcine skin was monitored by EPR, and subsequently analyzed using a numerical diffusion model. As a result, diffusion constants and free energy values in the different layers of the skin were identified for both formulations. Dx-nanocrystals showed a significantly increased drug amount that penetrated into viable epidermis and dermis of intact (factor 3) and barrier-disrupted skin (factor 2.1) compared to the base cream formulation. Furthermore, the observed fast delivery of the spin-labeled drug into the skin (80% DxPCA within 30 min) and a successive release from the aggregate unit into the viable tissue makes these nanocrystals very attractive for clinical applications.

SLN and NLC for topical, dermal, and transdermal drug delivery

Introduction: From a biopharmaceutical standpoint, the skin is recognized as an interesting route for drug delivery. In general, small molecules are able to penetrate the stratum corneum, the outermost layer of the skin. In contrast, the delivery of larger molecules, such as peptides and proteins, remains a challenge. Nanoparticles have been exploited not only to enhance skin penetration of drugs but also to expand the range of molecules to be clinically used.Areas covered: This review focus on Solid lipid nanoparticles (SLN) and Nanostructured lipid carriers (NLC) for skin administration. We discuss the selection criteria for lipids, surfactants, and surface modifiers commonly in use in SLN/NLC, their production techniques, and the range of drugs loaded in these lipid nanoparticles for the treatment of skin disorders.Expert opinion: Depending on the lipid and surfactant composition, different nanoparticle morphologies can be generated. Both SLN and NLC are composed of lipids that resemble those of the skin and sebum, which contribute to their enhanced biocompatibility, with limited toxicological risk. SLN and NLC can be loaded with very chemically different drugs, may provide a tunable release profile, can be produced in a sterilized environment, and be scaled-up without the need for organic solvents.

An integrated vitamin E-coated polymer hybrid nanoplatform: A lucrative option for an enhanced in vitro macrophage retention for an anti-hepatitis B therapeutic prospect

A platform capable of specifically delivering an antiviral drug to the liver infected with hepatitis B is a major concern in hepatology. Vaccination has had a major effect on decreasing the emerging numbers of new cases of infection. However, the total elimination of the hepatitis B virus from the body requires prolonged therapy. In this work, we aimed to target the liver macrophages with lipid polymer hybrid nanoparticles (LPH), combining the merit of polymeric nanoparticles and lipid vesicles. The hydrophilic antiviral drug, entecavir (E), loaded LPH nanoparticles were optimized and physicochemically characterized. A modulated lipidic corona, as well as, an additional coat with vitamin E were used to extend the drug release enhance the macrophage uptake. The selected vitamin E coated LPH nanoparticles enriched with lecithin-glyceryl monostearate lipid shell exhibited high entrapment for E (80.47%), a size ≤ 200 nm for liver passive targeting, extended release over one week, proven serum stability, retained stability after refrigeration storage for 6 months. Upon macrophage uptake in vitro assessment, the presented formulation displayed promising traits, enhancing the cellular retention in J774 macrophages cells. In vivo and antiviral activity futuristic studies would help in the potential application of the ELPH in hepatitis B control.

Preparation and evaluation of tacrolimus-loaded thermosensitive solid lipid nanoparticles for improved dermal distribution

Background: Tacrolimus (TCR), also known as FK-506, is a biopharmaceutics classification system (BCS) class II drug that is insoluble in water because of its high log P values. After dermal application, TCR remains in the stratum corneum and passes through the skin layers with difficulty.

Purpose: The objectives of this study were to develop and evaluate solid lipid nanoparticles (SLNs) with thermosensitive properties to improve penetration and retention.

Methods: We prepared TCR-loaded thermosensitive solid lipid nanoparticles (TCR-SLNs) with different types of surfactants on the shell of the particle, which conferred the advantages of enhancing skin permeation and distribution. We also characterized them from a physic point of view and performed in vitro and in vivo evaluations.

Results: The TCR contained in the prepared TCR-SLN was in an amorphous state and entrapped in the particles with a high loading efficiency. The assessment of ex vivo skin penetration using excised rat dorsal skin showed that the TCR-SLNs penetrated to a deeper layer than the reference product (0.1% Protopic^®). In addition, the in vivo skin penetration test demonstrated that TCR-SLNs delivered more drug into deeper skin layers than the reference product. FT-IR images also confirmed drug distribution of TCR-SLNs into deeper layers of the skin.

Conclusion: These results revealed the potential application of thermosensitive SLNs for the delivery of difficult-to-permeate, poorly water-soluble drugs into deep skin layers.

Preparation, Characterization and Antioxidant Evaluation of Poorly Soluble Polyphenol-Loaded Nanoparticles for Cataract Treatment

Cataract, one of the leading causes of blindness worldwide, is a condition in which complete or partial opacity develops in the lens of the eyes, thereby impairing vision. This study aimed to examine the potential therapeutic and protective effects of poorly soluble polyphenols like curcumin, resveratrol, and dibenzoylmethane, known to possess significant antioxidant activity. The polyphenols were loaded into novel lipid-cyclodextrin-based nanoparticles and characterized by particle size, polydispersity index, differential scanning calorimetry, thermogravimetric analysis, X-ray diffraction, scanning electron microscopy (SEM), entrapment efficiency, and release studies. Ferric-reducing ability of plasma and 2,2-diphenyl-1-picrylhydrazyl chemical assays were used to evaluate their antioxidant properties based on their free radical quenching ability. Biochemical in vitro assays were used to examine these polyphenols on hydrogen peroxide-induced formation of cataracts in bovine lenses by estimating total glutathione content and superoxide dismutase activity. Nanoparticles were thermostable and amorphous. Particle size of curcumin, resveratrol, and dibenzoylmethane nanoparticles were 331.0 ± 17.9 nm, 329.9 ± 1.9 nm, and 163.8 ± 3.2 nm, respectively. SEM confirmed porous morphology and XRD confirmed physical stability. Entrapment efficiency for curcumin-, resveratrol-, and dibenzoylmethane-loaded nanoparticles was calculated to be 84.4 ± 2.4%, 72.2 ± 1.5%, and 86.4 ± 0.6%, respectively. In vitro release studies showed an initial burst release followed by a continuous release of polyphenols from nanoparticles. Chemical assays confirmed the polyphenols' antioxidant activity. Superoxide dismutase and glutathione levels were found to be significantly increased (p < 0.05) after treatment with polyphenol-loaded nanoparticles than pure polyphenols; thus, an improved antioxidant activity translational into potential anticataract activity of the polyphenols when loaded into nanoparticles was observed as compared to pure polyphenols.

Formulation and Characterization of Native and Crosslinked Hyaluronic Acid Microspheres for Dermal Delivery of Sodium Ascorbyl Phosphate: A Comparative Study

The present work evaluates for the first time the use of urea-crosslinked hyaluronic acid (HA-CL), a novel derivative of native hyaluronic acid (HA), to produce microspheres (MS) by emulsification-solvent evaporation, for dermal delivery of sodium ascorbyl phosphate (SAP). As the term of comparison, HA MS were prepared. A pre-formulation study-investigation of the effects of polymers solutions properties (pH, viscosity) and working conditions-led to the - production of optimized HA-CL MS and HA-CL-SAP MS with: almost unimodal size distributions; mean diameter of 13.0 ± 0.7 and 9.9 ± 0.8 µm, respectively; spherical shape and rough surface; high yield, similar to HA MS and HA⁻SAP MS (≈ 85%). SAP was more efficiently encapsulated into HA-CL MS (78.8 ± 2.6%) compared to HA MS (69.7 ± 4.6%). Physical state, thermal properties, relative moisture stability of HA-CL MS and HA-CL⁻SAP MS were comparable to those of HA MS and HA⁻SAP MS. However, HA-CL⁻SAP MS exhibited an extended drug release compared to HA⁻SAP MS, despite the same kinetic mechanism-contemporaneous drug diffusion and polymer swelling/dissolution. Therefore, HA-CL formulation showed a greater potential as microcarrier (for encapsulation efficiency and release kinetic), that could be improved, in future, using suitable excipients.

Nanostructured lipid carriers: A potential use for skin drug delivery systems

Skin application of pharmaceutical products is one of the methods used for drug administration. The problem of limited drug penetration via topical application makes searching for safe drug carriers that will provide an expected therapeutic effect of utmost importance. Research into safe drug carriers began with liposome structures, paving the way for work with nanocarriers, which currently play a large role as drug vehicles. Nanostructured lipid carriers (NLC) consist of blended solid and liquid lipids (oils) dispersed in an aqueous solution containing a surfactant. These carriers have many advantages: good biocompatibility, low cytotoxicity, high drug content; they enhance a drug's stability and have many possibilities of application (oral, intravenous, pulmonary, ocular, dermal). The following article presents properties, methods of preparation and tests to assess the quality and toxicity of NLC. This analysis indicates the possibility of using NLC for dermal and transdermal drug application.

Identification of polystyrene nanoparticle penetration across intact skin barrier as rare event at sites of focal particle aggregations

The question whether nanoparticles can cross the skin barrier is highly debated. Even in intact skin rare events of deeper penetration have been reported, but technical limitations and possible artifacts require careful interpretation. In this study, horizontal scanning by 2-photon microscopy (2 PM) of full-thickness human skin samples placed in a lateral position yielded highly informative images for skin penetration studies of fluorescently tagged nanoparticles. Scanning of large fields of view allowed for detailed information on interfollicular and follicular penetration in tissue blocks without damaging the sample. Images in histomorphological correlation showed that 2P-excited fluorescence signals of fluorescently tagged 20 and 200 nm polystyrene nanoparticles preferentially accumulated in the stratum corneum (SC) and in the upper part of vellus hair follicles (HFs). Rare events of deeper penetration in the SC and in the infundibulum of vellus HFs were observed at sites of high focal particle aggregations. Wide-field 2 PM allows for imaging of nanoparticle penetration in large tissue blocks, whereas total internal reflection microscopy (TIRFM) enables selective detection of individual nanoparticles as well as clusters of nanoparticles in the SC and within the epidermal layer directly beneath the SC, thus confirming barrier crossing with high sensitivity.

Going skin deep: A direct comparison of penetration potential of lipid-based nanovesicles on the isolated perfused human skin flap model

Phospholipid-based nanocarriers are attractive drug carriers for improved local skin therapy. In the present study, the recently developed isolated perfused human skin flap (IPHSF) model was used to directly compare the skin penetration enhancing potential of the three commonly used nanocarriers, namely conventional liposomes (CLs), deformable liposomes (DLs) and solid lipid nanoparticles (SLNs). Two fluorescent markers, calcein (hydrophilic) or rhodamine (lipophilic), were incorporated individually in the three nanosystems. The nanocarrier size ranged between 200 and 300nm; the surface charge and entrapment efficiency for both markers were dependent on the lipid composition and the employed surfactant. Both carrier-associated markers could not penetrate the full thickness human skin, confirming their suitability for dermal drug delivery. CLs exhibited higher retention of both markers on the skin surface compared to DLs and SLNs, indicating a depo formation. DLs and SLNs enabled the deeper penetration of the two markers into the skin layers. In vitro and ex vivo skin penetration studies performed on the cellophane membrane and full thickness pig/human skin, respectively, confirmed the findings. In conclusion, efficient dermal drug delivery can be achieved by optimization of a lipid nanocarrier on the suitable skin-mimicking model to assure system's accumulation in the targeted skin layer.