Lipid-drug-conjugate (LDC) solid lipid nanoparticles (SLN) for the delivery of nicotine to the oral cavity – Optimization of nicotine loading efficiency

A comprehensive review on lipid nanocarrier systems for cancer treatment: fabrication, future prospects and clinical trials

Over the last few decades, cancer has been considered a clinical challenge, being among the leading causes of mortality all over the world. Although many treatment approaches have been developed for cancer, chemotherapy is still the most utilized in the clinical setting. However, the available chemotherapeutics-based treatments have several caveats including their lack of specificity, adverse effects as well as cancer relapse and metastasis which mainly explains the low survival rate of patients. Lipid nanoparticles (LNPs) have been utilized as promising nanocarrier systems for chemotherapeutics to overcome the challenges of the currently applied therapeutic strategies for cancer treatment. Loading chemotherapeutic agent(s) into LNPs improves drug delivery at different aspects including specific targeting of tumours, and enhancing the bioavailability of drugs at the tumour site through selective release of their payload, thus reducing their undesired side effects on healthy cells. This review article delineates an overview of the clinical challenges in many cancer treatments as well as depicts the role of LNPs in achieving optimal therapeutic outcomes. Moreover, the review contains a comprehensive description of the many LNPs categories used as nanocarriers in cancer treatment to date, as well as the potential of LNPs for future applications in other areas of medicine and research.

Fabrication of solid lipid nanoparticles-based patches of paroxetine and their ex-vivo permeation behaviour

Paroxetine is not suitable for oral administration due to its extensive first-pass metabolism, thus resulting in less bioavailability. This study aimed to prepare novel paroxetine-loaded solid lipid nanoparticles (SLNs) based sustained-release transdermal patches to overcome these problems by enhancing drug absorption and bioavailability. Nine formulations of paroxetine SLNs were prepared by the hot melt-homogenization method using different concentrations of glycerol monostearate (Kolliwax) and Tween 80. Then these prepared SLNs were incorporated in a matrix type transdermal patch having a matrix of ethyl cellulose and polyvinyl pyrrolidone in 3:2 with polyvinyl alcohol. The SLNs showed a particle size range of 113-230 nm and an entrapment efficiency of 85.14%. The SLNs showed sustained paroxetine release (77.86-95.63% release) up to 48 h. FTIR studies showed no interaction between drug and formulation components. Paroxetine is evenly distributed in an amorphous form in SLNs, as demonstrated by DSC as well as PXRD analysis. SLNs formulated patches showed higher drug permeation through the skin than drug-based transdermal patches., Draize patch test revealed no sign of erythema after applying paroxetine-loaded SLN patches (score 0) as observed with the marketed product. The developed SLNs based transdermal patches showed increased permeability and sustained release behaviour.

siRNA-Based Novel Therapeutic Strategies to Improve Effectiveness of Antivirals: An Insight

Since the ground-breaking discovery of RNA interference (RNAi), scientists have made significant progress in the field of small interfering RNA (siRNA) treatments. Due to severe barriers to the therapeutic application of siRNA, nanoparticle technologies for siRNA delivery have been designed. For pathological circumstances such as viral infection, toxic RNA abnormalities, malignancies, and hereditary diseases, siRNAs are potential therapeutic agents. However, systemic administration of siRNAs in vivo remains a substantial issue due to a lack of "drug-likeness" (siRNA are relatively larger than drugs and have low hydrophobicity), physiological obstacles, and possible toxicities. This write-up covers important accomplishment in the field of clinical trials and patents specially based of siRNAs using targeting viruses. Furthermore, it offers deep insight of nanoparticle applied for siRNA delivery and strategies to improve the effectiveness of antivirals.

Design and Preclinical Evaluation of Nicotine-Stearic Acid Conjugate-Loaded Solid Lipid Nanoparticles for Transdermal Delivery: A Technical Note

This study aimed to develop and evaluate nicotine--stearic acid conjugate-loaded solid lipid nanoparticles (NSA-SLNs) for transdermal delivery in nicotine replacement therapy (NRT). Nicotine conjugation to stearic acid prior to SLN formulation greatly increased drug loading. SLNs loaded with a nicotine-stearic acid conjugate were characterized for size, polydispersity index (PDI), zeta potential (ZP), entrapment efficiency, and morphology. Pilot in vivo testing was carried out in New Zealand Albino rabbits. The size, PDI, and ZP of nicotine-stearic acid conjugate-loaded SLNs were 113.5 ± 0.91 nm, 0.211 ± 0.01, and -48.1 ± 5.75 mV, respectively. The entrapment efficiency of nicotine-stearic acid conjugate in SLNs was 46.45 ± 1.53%. TEM images revealed that optimized nicotine-stearic acid conjugate-loaded SLNs were uniform and roughly spherical in shape. Nicotine-stearic acid conjugate-loaded SLNs showed enhanced and sustained drug levels for up to 96 h in rabbits when compared with the control nicotine formulation in 2% HPMC gel. To conclude, the reported NSA-SLNs could be further explored as an alternative for treating smoking cessation.

Nano-Encapsulated Melatonin: A Promising Mucosal Adjuvant in Intranasal Immunization against Chronic Experimental T. gondii Infection

Melatonin (MLT) is now emerging as one of the universally accepted immunostimulators with broad applications in medicine. It is a biological manipulator of the immune system, including mucosal ones. MLT was encapsulated in solid lipid nanoparticles (SLNs), then 100 mg/kg/dose of MLT-SLNs was used as an adjuvant of Toxoplasma lysate antigen (TLA). Experimental mice were intra-nasally inoculated with three doses of different regimens every two weeks, then challenged with 20 cysts of T. gondii Me49 strain, where they were sacrificed four weeks post-infection. Protective vaccine efficacy was evident via the significant brain cyst count reduction of 58.6%, together with remarkably high levels of humoral systemic and mucosal anti-Toxoplasma antibodies (Ig G, Ig A), supported by a reduced tachyzoites invasion of Vero cells in vitro upon incubation with sera obtained from these vaccinated mice. A cellular immune response was evident through the induction of significant levels of interferon-gamma (IFN γ), associated with morphological deteriorations of cysts harvested from the brains of vaccinated mice. Furthermore, the amelioration of infection-induced oxidative stress (OS) and histopathological changes were evident in mice immunized with TLA/MLT-SLNs. In conclusion, the present study highlighted the promising role of intranasal MLT-SLNs as a novel mucosal adjuvant candidate against chronic toxoplasmosis.

Fundamental Aspects of Lipid-Based Excipients in Lipid-Based Product Development

Poor aqueous solubility of drugs is still a foremost challenge in pharmaceutical product development. The use of lipids in designing formulations provides an opportunity to enhance the aqueous solubility and consequently bioavailability of drugs. Pre-dissolution of drugs in lipids, surfactants, or mixtures of lipid excipients and surfactants eliminate the dissolution/dissolving step, which is likely to be the rate-limiting factor for oral absorption of poorly water-soluble drugs. In this review, we exhaustively summarize the lipids excipients in relation to their classification, absorption mechanisms, and lipid-based product development. Methodologies utilized for the preparation of solid and semi-solid lipid formulations, applications, phase behaviour, and regulatory perspective of lipid excipients are discussed.

Applying design of experiments (DoE) on the properties of buccal film for nicotine delivery

Design of experiments is used to optimize ratios between deproteinized natural rubber latex, Eudragit® NM 30 D, and pectin for nicotine buccal film with dependent variables as moisture content, moisture uptake, and swelling index in simulated saliva 3 and 5 h. Mathematical models were linear for moisture content and moisture uptake, while swelling index in simulated saliva 3 and 5 h was a quadratic model. Optimized polymer ratio was 0.319:0.362:0.319, respectively. Experimental values were 13.17 ± 0.92%, 3.96 ± 0.84%, 112.58 ± 22.63%, and 124.69 ± 8.01% for dependent variables, respectively. The buccal film showed high swelling at pH 7 and swelling–deswelling behaviors in a water/ethanol environment. The surface pH, weight, and thickness were 8.11, 63.28 ± 6.18 mg, and 219.87 ± 44.28 µm, respectively. Nicotine content was found as 10.22 ± 0.46 mg/4 cm2. Maximum cumulative nicotine release was 9.82 ± 0.94 mg/4 cm2. Kinetic model fitted to the Korsmeyer-Peppas model and release exponent was 0.36, representing that release mechanism was controlled by Fickian diffusion release.

Influence of Process Design on the Preparation of Solid Lipid Nanoparticles by an Ultrasonic-Nanoemulsification Method

In recent years, lipid-based nanosystems have emerged as a promising class of nanocarriers for encapsulating many active agents. Solid lipid nanoparticles (SLNs) provide good stability (colloidal as well as physical) and high biocompatibility. Appropriate design of the carrier structure through a selection of components and preparation methods allows us to obtain formulations with desired physicochemical parameters and biological properties. The present contribution has been carried out to investigate SLNs containing biocompatible phosphatidylcholine mixed with non-ionic surfactant Tween 60 as stabilizing agents. The internal lipid phase consisted of glyceryl monostearate was confirmed as safe for drug delivery by the Food and Drug Administration. The SLNs were fabricated by ultrasonic-nanoemulsification method. The preparation process was optimized in regard to variable parameters such as ultrasonication time and used amplitude and number of cycles. The sizes of the studied nanoparticles along with the size distribution were determined by dynamic light scattering (DLS), while shape and morphology were determined by atomic force microscopy (AFM) and transmission electron microscopy (TEM). The colloidal stability was measured by a turbidimetric method. The physical state of SLNs was characterized using differential scanning calorimetry (DSC). The obtained results indicate that the proposed SLNs may provide great potential for design and preparation of novel delivery nanosystems with a variety of possible applications.

Solid Lipid Nanoparticles: A Promising Nanomaterial in Drug Delivery

The solid lipid nanoparticles (SLNs) usually consists of active drug molecules along with solid lipids, surfactants, and/or co-surfactants. They possess some potential features such as nano-size, surface with a free functional group to attach ligands, and as well they prove safe homing for both lipophilic as well as hydrophilic molecules. As far as synthesis is concerned, SLNs can be prepared by employing various techniques viz., homogenization techniques (e.g., high-pressure, high-speed, cold, or hot homogenization), spray drying technique, ultrasonication, solvent emulsification, double emulsion technique, etc. Apart from this, they are characterized by different methods for determining various parameters like particle-size, polydispersity-index, surface morphology, DSC, XRD, etc. SLNs show good stability as well as the ability for surface tailoring with the specific ligand, which makes them a suitable candidate in the therapy of numerous illnesses, especially in the targeting of the cancers. In spite of this, SLNs have witnessed their application via various routes e.g., oral, parenteral, topical, pulmonary, rectal routes, etc. Eventually, SLNs have also shown great potential for delivery of gene/DNA, vaccines, as well as in cosmeceuticals. Hence, SLNs have emerged as a promising nanomaterial for efficient delivery of various Active Pharmaceutical Ingredients (APIs).

Plant-Derived Butters as Lipid Nanocarriers: A Systematic and Prospective Review

BACKGROUND

Pharmaceutical nanotechnology represents an efficient alternative for the delivery of pharmacologically active plant-derived compounds, considering their protective capacity, oral bioavailability and drug vectorization capacity. In this context, butters obtained from plant seeds have emerged as promising products for the development of pharmacologically active nanostructures. They possess a complex lipid composition, allowing the formation of different emulsion systems with solid cores, since this mixture of different triglycerides is solid at room temperature and body temperature. Therefore, the systematic mapping around the technological development of nanostructures produced from plant-derived butters is potentially valuable for researchers interested in novel alternative formulations for pharmacological therapy, with potential industrial, economic, health and societal impacts.

METHODS

Systematic review was carried out by the search of scientific papers and patents deposited in official databases concerning the development of nanostructured pharmaceutical products using plantderived butters as starting material. The publications obtained were subjected to sorting and analysis by applying the following inclusion/exclusion criteria.

RESULTS

The Solid Lipid Nanoparticle (SLN) was the type of nanostructure produced in all the analyzed scientific papers, due to the physicochemical characteristics of the lipid constituents of plantderived butters. In this sense, 54% of the articles have reported the use of Cocoa Butter for the production of nanostructures; 28% for Shea Butter; 6% for Cupuacu Butter, 6% for Murumuru Butter and 6% for Bacuri Butter.

DISCUSSION

In the technological prospection, only two patents exhibited SLN as an invention based on cocoa butter and on shea butter, respectively. The production methods employed have included: phase inversion temperature, microemulsion, hot high pressure homogenization, high shear homogenization and ultrasonication.

CONCLUSION

In light of this prospective review, the encouragement of novel studies in lipids-based nanotechnology is evident, considering the small number of findings so far, in order to stimulate new research involving plant-derived butters from easily cultivated fruits in tropical regions, then stimulating the pharmaceutical development of new therapeutic alternatives using biocompatible and sustainable raw materials.

Lipid-based nano delivery of antimicrobials to control food-borne bacteria

Direct application of antibacterial agents into foods gives limited advantages because bioactive ingredients may be partially inactivated, neutralized, or easily diffused when contacting with the food matrix. Hence, the aim of this study is to investigate the application of lipid-based nanocarriers as delivery systems for antibacterial ingredients. In this regard, several types of these carriers such as nanoliposomes, nanoemulsions, solid lipid nanoparticles (SLNs), and nanostructured lipid carriers (NLCs) are explored. This study seeks to cover the important challenges of lipid-based nanocarriers including structures and characteristics, properties, production methods, advantages and drawbacks, and their applications to encapsulate antibacterial compounds effectively, particularly in food systems. However, for more scrutiny inspection of the functionality of lipid-based nanocarriers, we have gathered and discussed the studies related to the antibiotic-loaded lipid-based nanoparticles. Also, the role of such nanocarriers in active packaging systems when combining with edible coatings or films is discussed.

Solid lipid matrix mediated nanoarchitectonics for improved oral bioavailability of drugs

Introduction: Solid matrix mediated lipid nanoparticle formulations (LNFs) retain some of the best features of ideal drug carriers necessary for improving the oral absorption and bioavailability (BA) of both hydrophilic and hydrophobic drugs. LNFs with solid matrices may be typically categorized into three major types of formulations, viz., solid lipid nanoparticles (SLNs), nanostructured lipid carriers (NLCs) and lipid-drug conjugate nanoparticles (LDC-NPs). Solid matrix based LNFs are, potentially, the most appropriate delivery systems for poorly water soluble drugs in need of improved drug solubility, permeability, absorption, or increased oral BA. In addition, LNFs as matrices are able to encapsulate both hydrophobic and hydrophilic drugs in a single matrix based on their excellent ability to form cores and shells. Interestingly, LNFs also act as delivery devices to impart chemical stability to various orally administered drugs. Areas covered: Aim of the review is to forecast the presentation of pharmacokinetic characteristics of solid lipid matrix based nanocarriers which are typically biocompatible, biodegradable and non-toxic carrier systems for efficient oral delivery of various drugs. Efficient delivery is broadly mediated by the fact that lipophilic drugs are readily soluble in lipidic substrates that are capable of permeating across the gut epithelium following oral administration, subsequently delivering the moiety of interest more efficiently across the gut mucosal membrane. This enhances the overall BA of many drugs facing oral delivery challenges by improving their pharmacokinetic profile. This article specifically focuses on the biopharmaceutical and pharmacokinetic aspects of such solid lipid matrix based nanoformulations and possible mechanisms for better drug absorption and improved BA following oral administration. It also briefly reviews methods to access the efficacy of LNFs for improving oral BA of drugs, regulatory aspects and some interesting lipid-derived commercial formulations, with a concluding remark. Expert opinion: LNFs enhance the overall BA of many drugs facing oral delivery challenges by improving their pharmacokinetic profile.

Doxycycline-encapsulated solid lipid nanoparticles as promising tool against Brucella melitensis enclosed in macrophage: a pharmacodynamics study on J774A.1 cell line

Background

Brucellosis is a zoonotic disease caused by Brucella species. It has been estimated that more than 500,000 new cases of Brucellosis occur annually all around the world. Relapse of the disease is one of the most important challenges. The most important reason for the relapse of brucellosis is the survival of the bacteria inside the macrophages, which makes them safe from the immune system and disrupts drug delivery mechanism.

Objectives

The present study was performed to assess the effects of Doxycycline-loaded Solid Lipid Nanoparticles (DOX-SLN) on the Brucella melitensis inside macrophages.

Methods

DOX-SLN was prepared using double emulsion method. The technological characterization of DOX-SLN, including particle size, zeta potential, polydispersity index (PDI), drug loading and encapsulation efficiency were used. Fourier-transform infrared spectroscopy (FTIR) and Differential scanning calorimetry (DSC) were used to assess the interactions between Nanoparticles (NPs) components and crystalline form of doxycycline. Moreover, the effect of DOX-SLN on the bacteria were compared with that of the doxycycline using various methods, including well diffusion, Minimum Inhibitory Concentration (MIC), and investigation of their effects on murine macrophage-like cells cell line J774A.1.

Results

The means of particle size, zeta potential, PDI, drug loading and encapsulation efficiency were 299 ± 34 nm, − 28.7 ± 3.2 mV, 0.29 ± 0.027, 11.2 ± 1.3%, and 94.9 ± 3.2%, respectively. The morphology of NPs were spherical with a smooth surface. No chemical reaction was occurred between the components. Doxycycline was located within NP matrix in its molecular form. The DOX-SLN significantly decreased the microbial loading within macrophages (3.5 Log) in comparison with the free doxycycline.

Conclusions

Since the DOX-SLN showed better effects on B. melitensis enclosed in macrophages than the free doxycycline, it is recommended to use it for treating brucellosis and preventing relapse.