Impact of uncharged and charged stabilizers on in vitro drug performances of clarithromycin nanocrystals

Quercetin nanocrystals for bioavailability enhancement: impact of different functional stabilizers on in vitro/in vivo drug performances

The purpose of this study was to investigate the impact of different functional stabilizers on in vitro/in vivo drug performances after oral administration of drug nanocrystals. Quercetin nanocrystals (QT-NCs) respectively stabilized by five types of functional stabilizers, including hydroxypropyl methyl cellulose E15 (HPMC E15), poloxamer 407 (P407), poloxamer 188 (P188), D-α-tocopherol polyethylene glycol succinate (TPGS), and glycyrrhizin acid (GL), were fabricated by wet media milling technique. The particle size, morphology, physical state, drug solubility, drug dissolution in vitro, and orally pharmacokinetic behaviors of all QT-NCs were investigated. All QT-NCs with similar particle size about 200 nm were obtained by controlling milling speed and milling time. No significant differences in particles shape and crystalline nature were found for QT-NCs stabilized by different functional stabilizers. But the solubility and dissolution of QT-NCs were significantly influenced by the different functional stabilizers. The AUC0∼t of all QT-NCs after oral administration was in the following order: QT-NCs/P188 ≈ QT-NCs/HPMC E15 > QT-NCs/GL > QT-NCs/P407 ≈ QT-NCs/TPGS, and the Cmax showed an order of QT-NCs/P407 > QT-NCs/P188 ≈ QT-NCs/GL > QT-NCs/HPMC E15 > QT-NCs/TPGS. Both of QT-NCs/P407 and QT-NCs/TPGS exhibited faster oral absorption with Tmax at 0.5 h and 0.83 h, respectively, while the other three QT-NCs (QT-NCs/P188, QT-NCs/GL and QT-NCs/HPMC E15) showed a relatively slow absorption with same Tmax at 5.33 h. The longest MRT0∼t (11.72 h) and t1/2z (32.22 h) were observed for QT-NCs/HPMC E15. These results suggested that the different functional stabilizers could significantly influence on drug solubility, drug dissolution in vitro and orally pharmacokinetic behavior of QT-NCs, and it is possible to alter the drug dissolution in vitro, oral absorption and drug retention in vivo by changing the type of functional stabilizers in NCs preparation.

Fabrication and in vitro/vivo evaluation of quercetin nanocrystals stabilized by glycyrrhizic acid for liver targeted drug delivery

The purpose of this study was to design novel drug nanocrystals (NCs) stabilized by glycyrrhizic acid (GL) for achieving liver targeted drug delivery due to the presence of GL receptor in the hepatocytes. Quercetin (QT) exhibits good pharmacological activities for the treatment of liver diseases, including liver steatosis, fatty hepatitis, liver fibrosis, and liver cancer. It was selected as a model drug owing to its poor water solubility. QT NCs stabilized by GL (QT-NCs/GL) were fabricated by wet media milling technique and systemically evaluated. QT-NCs stabilized by poloxamer 188 (QT-NCs/P188) were prepared as a reference for comparison of in vitro and in vivo performance with QT-NCs/GL. QT-NCs/GL and QT-NCs/P188 with similar particle size around 130 nm were successfully fabricated by wet media milling technique. Both of QT-NCs/GL and QT-NCs/P188 showed irregular particles and short rods under SEM. XRPD revealed that QT-NCs/GL and QT-NCs/P188 remained in crystalline state with reduced crystallinity. QT-NCs/GL and QT-NCs/P188 exhibited significant solubility increase and drug release improvement of QT as compared to raw QT. No significant difference for the plasma concentration-time curves and pharmacokinetic parameters of QT were found following intravenous administration of QT-NCs/GL and QT-NCs/P188. However, a significantly higher liver distribution of QT following intravenous administration of QT-NCs/GL was observed in comparison to QT-NCs/P188, indicating QT-NCs stabilized by GL could achieve liver targeted delivery of QT. It could be concluded that GL used as stabilizer of QT NCs have a great potential for liver targeted drug delivery.

Enhanced Anti-Inflammatory Activity of Tilianin Based on the Novel Amorphous Nanocrystals

Tilianin (Til), a flavonoid glycoside, is well-known for its therapeutic promise in treating inflammatory disorders. Its poor water solubility and permeability limit its clinical applicability. In order to overcome these restrictions, an antisolvent precipitation and ultrasonication technique was used to prepare amorphous tilianin nanocrystals (Til NCs). We have adjusted the organic solvents, oil-to-water ratio, stabilizer composition, and ultrasonic power and time by combining single-factor and central composite design (CCD) methodologies. The features of Til NCs were characterized using powder X-ray diffraction (PXRD), scanning calorimetry (DSC), and transmission electron microscopy (TEM). Specifically, the optimized Til NCs were needle-like with a particle size ranging from 90 to 130 nm. PVA (0.3%, w/v) and TPGS (0.08%, w/v) stabilized them well. For at least two months, these Til NCs stayed amorphous and showed an impressive stability at 4 °C and 25 °C. Remarkably, Til NCs dissolved almost 20 times faster in simulated intestinal fluid (SIF) than they did in crude Til. In RAW264.7 cells, Til NCs also showed a better cellular absorption as well as safety and protective qualities. Til NCs were shown to drastically lower reactive oxygen species (ROS), TNF-α, IL-1β, and IL-6 in anti-inflammatory experiments, while increasing IL-10 levels and encouraging M1 macrophages to adopt the anti-inflammatory M2 phenotype. Our results highlight the potential of amorphous Til NCs as a viable approach to improve Til's anti-inflammatory effectiveness, solubility, and dissolving rate.

Systematic Screening Study for the Selection of Proper Stabilizers to Produce Physically Stable Canagliflozin Nanosuspension by Wet Milling Method

One of the crucial approaches to managing the low solubility and weak bioavailability of drugs is via nanocrystal technology. Through this technology, drug particles have an increased solubility and a faster dissolution rate due to high surface free energy, which requires an appropriate stabilizer(s) to prevent instabilities during the manufacturing process and storage of the nanosuspension. This study aimed to establish a scientific predictive system for properly selecting stabilizers or to reduce the attempts on a trial-and-error basis in the wet-milling method. In total, 42 experiments were performed to examine the effect of critical material attributes on the wettability of the drug, the saturation solubility in the stabilizer solutions or combinations thereof and the dynamic viscosity of stabilizer solutions. All data were evaluated by Minitab 19® and an optimization study was performed. The optimized formulation at a certain concentration of stabilizer combination was ground by Dyno Mill® with 0.3 mm beads for one hour. The optimized nanosuspension with a particle size of 204.5 nm was obtained in short milling time and offered 3.05- and 3.51 times better dissolution rates than the marketed drug product (Invokana® 100 mg) in pH 4.5 and pH 6.8 as non-sink conditions, respectively. The formulation was monitored for three months at room temperature and 4 °C. The parameters were 261.30 nm, 0.163, -14.1 mV and 261.50 nm, 0.216 and -17.8 mV, respectively. It was concluded that this approach might indicate the appropriate selection of stabilizers for the wet-milling process.

Intravenous nanocrystals: fabrication, solidification, in vivo fate, and applications for cancer therapy

INTRODUCTION

Intravenous nanocrystals (INCs) have shown intrinsic advantages in antitumor applications, particularly their properties of high drug loading, low toxicity, and controllable size. Therefore, it has a very bright application prospect as a drug delivery system.

AREAS COVERED

The ideal formulation design principles, fabrication, solidification, in vivo fate of INCs, the applications in drug delivery system (DDS) and the novel applications are covered in this review.

EXPERT OPINION

It is vital to select a suitable formulation and fabrication method to produce a stable and sterile INCs. Besides, the type of stabilizers and physical characteristics can also influence the in vivo fate of INCs, which is worthy of further studying. Based on wide researches about applications of INCs in cancer, biomimetic INCs are concerned increasingly for its favorable compatibility. The output of these studies suggested that INCs-based drug delivery could be a novel strategy for addressing the delivery of the drug that faces solubility, bioavailability, and toxicity problems.

Highly water-soluble dapsone nanocrystals: Towards innovative preparations for an undermined drug

Dapsone (DAP)is a dual-function drug substance; however, its limited water solubility may impair its bioavailability. Drug nanocrystals are an alternative to overcome this limitation. Herein, a DAP nanosuspension was prepared using adesign space approach aiming to investigate the influence of raw material properties and process parameters on the critical quality attributes of the drugnanocrystals. Optimized nanocrystals with 206.3 ± 6.7 nm using povacoat™ as stabilizer were made. The nanoparticles were characterized by dynamic light scattering, laser diffraction, scanning electron microscopy, differential scanning calorimetry, X-ray powder diffraction, and saturation solubility. Compared to the raw material, the nanocrystals were 250-times smaller. Meanwhile, its crystalline state remained basically unchanged even after milling and drying. The nanosuspension successfully maintained its physical stability inlong-termandaccelerated stability studiesover, 4 and 3 months. Furthermore, toxicity studiesshowed low a toxicity at a20 mg/kg. As expected for nanocrystals, the size reduction improvedsaturation solubility3.78 times in water. An attempt to scale up from lab to pilot scale resulted nanocrystals of potential commercial quality. In conclusion, the present study describes the development of dapsone nanocrystals for treating infectious and inflammatory diseases. The nanocrystal formuation can be scaled up for commercial use.

Efficacy of Xiyanping in the Treatment of Elderly Patients with Chronic Obstructive Pulmonary Disease and Its Effect on the Expression of GDF-15 and HIF-1α in Serum

Background

COPD is a chronic respiratory disease with a long course and recurrent characteristics. According to relevant statistics, the global incidence of COPD is more than 30%, which seriously affects the life of patients and endangers their health.

Objective

To observe the curative effect of Xiyanping in elderly patients with COPD and its influence on the expressions of growth differentiation GDF-15 and HIF-1α in serum.

Methods

From August 2019 to December 2021, 86 elderly patients with acute exacerbation of COPD were admitted to our hospital. As the research objects, they were divided into the control group (n = 43) and the observation group (n = 43) randomly. The control group received the conventional treatment, while the observation group got Xiyanping on the basis of the control group. The differences in the duration of antibiotic use, expectoration, hospital stays, adverse reactions and serum-related factors, blood routine, pulmonary function, airway hyperreactivity index, COPD assessment test (CAT) score, and Borg score were made a comparison between them.

Results

On the 3rd and 7th days after being treated, the sputum excretion in them was higher than before, but on the 3rd day of treatment, the sputum excretion in the observation group was higher than that in the control group, while on the 7th day of treatment, the sputum excretion was lower than that in the control group with statistically significant differences (P < 0.05). Before treatment, the serum-related factors and blood routine indexes between them were similar (P > 0.05). After treatment, GDF-15, HIF-1α, CXCL12, TNF-α, IL-8, TGF-β, WBC, and NEU in them were significantly lower than before, and the values in the observation group were significantly lower than those in the control group with statistically significant differences (P < 0.05). There was no difference in the related indexes of pulmonary function and airway hyperreactivity between them before treatment. After being treated, FEV1, FVC, and FEV1/FVC in them were significantly higher than those before treatment. The airway resistance and lung compliance of the two groups at exhalation and inspiration were significantly lower than before, and the values in the observation group were significantly lower than those in the control group (P < 0.05). There was no difference in CAT and Borg scores between them before treatment. After treatment, the CAT score and Borg score of these patients were significantly lower than those before treatment, and the value of the observation group was significantly lower than that of the control group (P < 0.05). The duration of antibiotic use and length of stay in the observation group were significantly shorter than those of the control group, while the incidence of adverse reactions was not statistically significantly different compared with the control group (P > 0.05).

Conclusion

Xiyanping can improve pulmonary function of elderly patients with acute exacerbation of COPD, reduce the response of airway hyperreactivity, and promote the excretion of sputum.

Biological and Intracellular Fates of Drug Nanocrystals through Different Delivery Routes: Recent Development Enabled by Bioimaging and PK Modeling

Nanocrystals have contributed to exciting improvements in the delivery of poorly water-soluble drugs. The biological and intracellular fates of nanocrystals are currently under debate. Due to the remarkable commercial success in enhancing oral bioavailability, nanocrystals have originally been regarded as a simple formulation approach to enhance dissolution. However, the latest findings from novel bioimaging tools lead to an expanded view. Intact nanocrystals may offer long-term durability in the body and offer drug delivery capabilities like those of other nano-carriers. This review renews the understanding of the biological fates of nanocrystals administered via oral, intravenous, and parenteral (e.g., dermal, ocular, and pulmonary) routes. The intracellular pathways and dissolution kinetics of nanocrystals are explored. Additionally, the future trends for in vitro and in vivo quantification of nanocrystals, as well as factors impacting the biological and intracellular fates of nanocrystals are discussed. In conclusion, nanocrystals present a promising and underexplored therapeutic opportunity with immense potential.

Drug Nanocrystals for Active Tumor-Targeted Drug Delivery

Drug nanocrystals, which are comprised of active pharmaceutical ingredients and only a small amount of essential stabilizers, have the ability to improve the solubility, dissolution and bioavailability of poorly water-soluble drugs; in turn, drug nanocrystal technology can be utilized to develop novel formulations of chemotherapeutic drugs. Compared with passive targeting strategy, active tumor-targeted drug delivery, typically enabled by specific targeting ligands or molecules modified onto the surface of nanomedicines, circumvents the weak and heterogeneous enhanced permeability and retention (EPR) effect in human tumors and overcomes the disadvantages of nonspecific drug distribution, high administration dosage and undesired side effects, thereby contributing to improving the efficacy and safety of conventional nanomedicines for chemotherapy. Continuous efforts have been made in the development of active tumor-targeted drug nanocrystals delivery systems in recent years, most of which are encouraging and also enlightening for further investigation and clinical translation.

Preparation and Characterization of pH-Independent Sustained-Release Tablets Containing Hot Melt Extruded Solid Dispersions of Clarithromycin : Tablets Containing Solid Dispersions of Clarithromycin

The limited solubility of clarithromycin (CAM), coupled with low bioavailability and rapid elimination, are major shortcomings, needed to be addressed to achieve optimum therapeutic goals. Therefore, sustained-release (SR) tablets containing solid dispersion (SD) granules of CAM were prepared in this study. Initially, SD granules of CAM were prepared by hot melt extrusion (HME) technique using Kollidon VA64 as a hydrophilic carrier. The saturation solubility of SD showed almost 4.5-fold increase as compared to pure CAM in pH 6.8 medium. In vitro drug dissolution data indicated a substantial increase in the dissolution of SD as compared to that of pure CAM. The thermal stability of drug, carrier, and SD at elevated HME temperatures was evident from the results of thermogravimetric analysis (TGA) and differential scanning calorimetry (DSC). Powder X-ray diffraction (PXRD) data and scanning electron microscope (SEM) images revealed a decrease in the crystallinity and the uniform dispersion of drug, respectively. Moreover, Fourier transformed infrared spectroscopy (FT-IR) data confirmed the formation of hydrogen bond between the carbonyl group of drug and the hydroxyl group of carrier. SD loaded sustained-release (SD-SR) matrix tablets were prepared with hydrophobic polymers (Eudragit RS100 and Eudragit RL100). The pH-independent swelling and permeability of both polymers were responsible for the sustained drug release from SD-SR tablets. Pharmacokinetic (PK) studies suggested a 3.4-fold increase in the relative bioavailability of SD-SR tablets as compared to that of pure CAM.

Study of Different Chitosan/Sodium Carboxymethyl Cellulose Proportions in the Development of Polyelectrolyte Complexes for the Sustained Release of Clarithromycin from Matrix Tablets

This study investigated the combination of different proportions of cationic chitosan and anionic carboxymethyl cellulose (CMC) for the development of polyelectrolyte complexes to be used as a carrier in a sustained-release system. Analysis via scanning electron microscopy (SEM) Fourier transform infrared spectroscopy (FTIR), differential scanning calorimetry (DSC), and powder X-ray diffraction (PXRD) confirmed ionic interactions occur between the chitosan and carboxymethyl cellulose chains, which increases drug entrapment. The results of the dissolution study in acetate buffer (pH 4.2) showed significant increases in the kinetic profiles of clarithromycin for low proportions of chitosan/carboxymethyl cellulose tablets, while the tablets containing only chitosan had high relaxation of chitosan chains and disintegrated rapidly. The Korsmeyer–Peppas kinetic model for the different interpolymer complexes demonstrated that the clarithromycin transport mechanism was controlled by Fickian diffusion. These results suggest that the matrix tablets with different proportions of chitosan/carboxymethyl cellulose enhanced the ionic interaction and enabled the prolonged release of clarithromycin.

Formulation, optimization, and characterization of whey protein isolate nanocrystals for celecoxib delivery

AIM

Current study aimed to improve the solubility and release profile of the celecoxib for cancer application. However, the low water solubility of celecoxib limited its application for cancer chemotherapy. Hence, new drug delivery-based approaches are compulsory for the efficient delivery of hydrophobic celecoxib for chemotherapy.

METHODS

The celecoxib-loaded nanocrystals were prepared by anti-solvent precipitation-ultrasonication technique, and the formulation was optimised through various process parameters.

RESULTS

The optimised formulation had an average particle diameter of 171.09 ± 6.23 nm, with a PDI of 0.123 ± 0.009 and high ZP -27.3 ± 0.2 mV. The optimised formulation was stable, had higher entrapment efficiency 97.26 ± 1.12%. The conformational changes in the denatured protein solution were detected through fluorescence spectroscopy. The transmission electron microscopy investigation showed rod-shaped nanocrystals morphology, and no chemical interactions were observed in optimised formulation through FTIR. The DSC and PXRD analysis exhibited an amorphous state of the freeze-dried formulation drug. Also, optimised nanocrystals enhance drug solubility around 26.01-fold, 15.51-fold and 19.08-fold in purified water, pH 6.8 and pH 7.4, and accomplish sustained drug delivery, respectively.

CONCLUSION

It can be concluded that biopolymer-coated celecoxib nanocrystals might be potential drug delivery of hydrophobic molecules for cancer therapy.

Use of 18β-glycyrrhetinic acid nanocrystals to enhance anti-inflammatory activity by improving topical delivery

18β-Glycyrrhetinic acid (GA) is often topically applied in clinical treatment of inflammatory skin diseases. However, GA has poor solubility in water, which results in poor skin permeability and low bioavailability. Nanocrystallization of drugs can enhance their permeability and improve bioavailability. We prepared GA nanocrystals (Nano GA) by high-pressure homogenization. These nanocrystals were characterized by photon correlation spectroscopy, scanning electron microscopy, thermogravimetric analysis, and X-ray diffractometry. The ability of Nano GA to improve dermal permeability was investigated ex vivo using Franz diffusion vertical cells and mouse skin. The topical anti-inflammatory activity of Nano GA was assessed in vivo by a 12-O-tetradecanoyl phorbol-13-acetate (TPA)-induced model in mouse ears. The average particle size of a GA nanocrystalline suspension was 288.6 ± 7.3 nm, with a narrow particle-size distribution (polydispersity index ∼0.13 ± 0.10), and the particle size of the lyophilized powder increased (552.0 ± 9.8 nm). After nanocrystallization, the thermal stability and crystallinity decreased but solubility increased significantly. Nano GA showed higher dermal permeability than Coarse GA. Macroscopic and staining-based observations of mouse ears and the levels of proinflammatory factors and myeloperoxidase revealed that the Nano GA hydrogel exhibited better anti-edema ability and more strongly inhibited inflammation development than the Coarse GA hydrogel and indomethacin hydrogel (positive drug). These results suggest that Nano GA could be an efficacious topical therapeutic agent for skin inflammation.

Current strategies for oral delivery of BCS IV drug nanocrystals: challenges, solutions and future trends

INTRODUCTION

Oral absorption of BCS IV drug benefits little from improved dissolution. Therefore, the absorption of BCS IV drug nanocrystals 'as a whole' strategy is preferred, and structural modification of nanocrystals is required. Surface modification helps the nanocrystals maintain particle structure before drug dissolution is needed, thus enhancing the oral absorption of BCS IV drugs and promoting therapeutic effect. Here, the main challenges and solutions of oral BCS IV drug nanocrystals delivery are discussed. Moreover, strategies for nanocrystal surface modification that facilitates oral bioavailability of BCS IV drugs are highlighted, and provide insights for the innovation in oral drug delivery.

AREAS COVERED

Promising size, shape, and surface modification of nanocrystals have gained interests for application in oral BCS IV drugs.

EXPERT OPINION

Nanocrystal surface modification is a feasible method to maintain the structural integrity of nanocrystals, and the introduced materials can also be modified to integrate additional functions to further facilitate the absorption of nanocrystals. It is expected that the absorption 'as a whole' strategy of nanocrystals will provide different choices for the oral BCS IV drugs.

Mechanistic Modeling of Wet Stirred Media Milling for Production of Drug Nanosuspensions

Drug nanocrystals have been used for a wide range of drug delivery platforms in the pharmaceutical industry, especially for bioavailability enhancement of poorly water-soluble drugs. Wet stirred media milling (WSMM) is the most widely used process for producing dense, stable suspensions of drug nanoparticles, also referred to as nanosuspensions. Despite a plethora of review papers on the production and applications of drug nanosuspensions, modeling of WSMM has not been thoroughly covered in any review paper before. The aim of this review paper is to briefly expose the pharmaceutical scientists and engineers to various modeling approaches, mostly mechanistic, including computational fluid dynamics (CFD), discrete element method (DEM), population balance modeling (PBM), coupled methods, the stress intensity-number model (SI-SN model), and the microhydrodynamic (MHD) model with a main focus on the MHD model for studying the WSMM process. A total of 71 studies, 30 on drugs and 41 on other materials, were reviewed. Analysis of the pharmaceutics literature reveals that WSMM modeling is largely based on empirical, statistically based modeling approaches, and mechanistic modeling could help pharmaceutical engineers develop a fundamental process understanding. After a review of the salient features and various pros-cons of each modeling approach, recent advances in microhydrodynamic modeling and process insights gained therefrom were highlighted. The SI-SN and MHD models were analyzed and critiqued objectively. Finally, the review points out potential research directions such as more mechanistic and accurate CFD-DEM-PBM simulations and the coupling of the MHD-PBM models with the CFD.

Biocompatibility of Biomaterials for Nanoencapsulation: Current Approaches

Nanoencapsulation is an approach to circumvent shortcomings such as reduced bioavailability, undesirable side effects, frequent dosing and unpleasant organoleptic properties of conventional drug delivery systems. The process of nanoencapsulation involves the use of biomaterials such as surfactants and/or polymers, often in combination with charge inducers and/or ligands for targeting. The biomaterials selected for nanoencapsulation processes must be as biocompatible as possible. The type(s) of biomaterials used for different nanoencapsulation approaches are highlighted and their use and applicability with regard to haemo- and, histocompatibility, cytotoxicity, genotoxicity and carcinogenesis are discussed.

Potentiality of Q3 characterization of nanosystem: Surrogate data for obtaining a biowaiver

A tremendous increase in the entry of drug delivery systems (DDSs) based on nanotechnology has been observed as a result of the ability of pharmaceutical nanotechnology to overcome the various drawbacks related to the first generation DDS. The patent period of these proprietary branded drugs gives its manufacturers sole exclusivity of their product in the market. As the patent period of these products expire, the generic players will initiate their attempts to manufacture and bring generic versions of the reference listed drug product (RLD) into the market. The regulatory approval for a generic DDS based on nanotechnology requires proving the therapeutic equivalence of the generic product with that of the RLD via pharmacodynamics clinical endpoint study on healthy subjects or patients. These studies are extremely complex, expensive and time-consuming and may have uncertain outcomes. Furthermore, development, scale-up and manufacturing of generic versions of nanotechnology-based DDS involves complex steps and achieving an optimized formulation heavily depends on the process parameters during manufacturing. The information in this review addresses the said issues above and emphasizes on the possibility of using exhaustive in vitro characterization of the generic versions of nanotechnology-based DDSs in the current market to obtain a biowaiver. Various processes involved and their importance in obtaining an optimized formulation have been described to address the issue regarding manufacturing complexities.

Advanced modification of drug nanocrystals by using novel fabrication and downstream approaches for tailor-made drug delivery

Drug nanosuspensions/nanocrystals have been recognized as one useful and successful approach for drug delivery. Drug nanocrystals could be further decorated to possess extended functions (such as controlled release) and designed for special in vivo applications (such as drug tracking), which make best use of the advantages of drug nanocrystals. A lot of novel and advanced size reduction methods have been invented recently for special drug deliveries. In addition, some novel downstream processes have been combined with nanosuspensions, which have highly broadened its application areas (such as targeting) besides traditional routes. A large number of recent research publication regarding as nanocrystals focuses on above mentioned aspects, which have widely attracted attention. This review will focus on the recent development of nanocrystals and give an overview of regarding modification of nanocrystal by some new approaches for tailor-made drug delivery.

Solid-state properties, solubility, stability and dissolution behaviour of co-amorphous solid dispersions of baicalin

Formation of different baicalin co-former based solid dispersion formulations, which demonstrate improved solubility and dissolution performance.