Pluronic-g-poly(acrylic acid) copolymers as novel excipients for site specific, sustained release tablets

Microencapsulation of Lactobacillus plantarum in W/O emulsions of okara oil and block-copolymers of poly(acrylic acid) and pluronic using microfluidic devices

Okara oil is a by-product remaining from defatting okara, the solid residue generated after extracting the aqueous fraction of grounded soybeans in the elaboration of soy beverages. The goal of this work was to encapsulate the probiotic Lactobacillus plantarum CIDCA 83114 into W/O emulsions composed of a block-copolymer constituted of pluronic® and acrylic acid (PPP12) and okara oil, prepared in microfluidic devices. For comparative purposes, alginate was also included as a second dispersed phase. Lactobacillus plantarum CIDCA 83114 was suspended in PPP12 or alginate giving rise to dispersed phases with different compositions, named I, II, III and IV. Controls were prepared by suspending microorganisms in water as dispersed phase. 6-carboxyfluorescein was added as bacterial marker in all the emulsions. The presence of green dyed bacteria in the dispersed phases, inside the droplets of the emulsions and the absence of fluorescence outside them, confirmed the complete encapsulation of bacteria in the dispersed phases. After being prepared, emulsions were freeze-dried. The exposure to gastric conditions did not lead to significant differences among the emulsions containing polymers. However, in all cases bacterial counts were significantly lower than those of the control. After exposing emulsions to the simulated intestinal environment, bacterial counts in assays I, II and III (emulsions composed of only one dispersed phase or of two dispersed phases with bacteria resuspended in the PPP12 one) were significantly greater than those of the control (p < 0.05) and no detectable microorganisms were observed for assay IV (emulsions composed of two dispersed phases with bacteria resuspended in the alginate one). In particular, bacterial cultivability in emulsions corresponding to assay I (only PPP12 as dispersed phase) exposed to the intestinal environment was 8.22 ± 0.02 log CFU/mL (2 log CFU higher than the values obtained after gastric digestion). These results support the role of PPP12 as an adequate co-polymer to protect probiotics from the gastric environment, enabling their release in the gut, with great potential for food or nutraceutical applications.

Aggregated Solution Morphology of Poly(acrylic acid)-Poly(styrene) Block Copolymers Improves Drug Supersaturation Maintenance and Caco-2 Cell Membrane Permeation

Amorphous solid dispersions of polymers and drugs have been shown to improve supersaturation maintenance of poorly water-soluble drugs. Herein, amorphous spray-dried dispersions (SDDs) of poly(acrylic acid)-polystyrene (PS-b-PAA) diblock copolymers with differing degrees of polymerization were prepared in aggregated and nonaggregated states with the Biopharmaceutical Classification System Class II drug, probucol (PBC). Specifically, PS₉₀-b-PAA₁₅, PS₉₀-b-PAA₈₀, PS₃₈-b-PAA₂₂₀, and PS₃₈-b-PAA₃₂₀ amphiphilic block polymers that covered a compositional range in the area of oral drug delivery were prepared to examine the role of molecular weight and controlled aggregation in promoting drug supersaturation and maintenance. In addition, hydrophilic homopolymers PAA₂₀, PAA₉₆, PAA₂₂₆, and PAA₃₉₂ were prepared as controls to evaluate the role of the block copolymer-based SDDs in PBC solubilization. Characterization such as powder X-ray diffraction, scanning electron microscopy, and dissolution tests under nonsink conditions were then performed to evaluate the SDDs. When comparing the block copolymer systems, polymers that were preaggregated into micellular structures prior to spray drying with the drug promoted higher drug solubility and maintenance than when the drug was formulated with molecularly dissolved PS-PAA block polymer. Interestingly, the aggregated PS₉₀-b-PAA₈₀ SDD with 25 wt % PBC achieved 100% burst release and maintained full supersaturation of PBC at pH 6.5 (physiological pH in the small intestine). Dissolution studies conducted at the pH of the stomach (pH = 1.2) show that a minimal amount of drug (∼10 μg/mL) was released, which could be used for protecting drugs from acidic environments (stomach) before reaching the small intestine. To evaluate drug bioavailability, in vitro Caco-2 cell assays were performed, which reveal that PAA-based excipients do not hinder drug permeation across the epithelial membrane and that PS₉₀-b-PAA₈₀ SDD with 25 wt % PBC achieved the highest membrane permeability coefficient. This work demonstrates that block copolymer-based SDDs capable of preaggregating into nanostructures may be a tunable drug-delivery platform that can improve solubility and supersaturation maintenance of Class II pharmaceutics while also not prohibiting bioavailability through model intestinal membranes. Indeed, this concept may be extended to accommodate a myriad of pharmaceutical and excipient structures.

Cross-linked Pluronic-g-Polyacrylic acid microgel system for the controlled release of doxorubicin in pharmaceutical formulations

The binding of doxorubicin (DOX) to cross-linked Pluronic F127-g-PAA-EGDMA and L92-g-PAA-EGDMA microgels at different alpha (α) and salt concentrations was investigated using isothermal titration calorimetric (ITC), optical and scanning electron microscopic techniques (SEM). We seek to elucidate the mechanisms of interaction and the release of DOX from cross-linked microgels composed of Pluronic and poly(acrylic acid). The ITC results indicated a high binding affinity of DOX to the microgel, which is a function of salt concentrations due to the impact of electrostatic shielding on the DOX-binding process. Applying the polyelectrolyte theory allows the decoupling of the Gibbs free energy of binding that describes the role of non-electrostatic interaction of DOX and the microgel. The presence of DOX within the microgel resulted in the collapse of the microgel due to charge shielding, π-π interactions and self-association of polymer-bound DOX molecules. The diffusion of DOX through the microgel is controlled by the dissociation of COO^-/DOX⁺ coupling pairs.

Evaluation of hydrogel composing of Pluronic F127 and carboxymethyl hexanoyl chitosan as injectable scaffold for tissue engineering applications

This study demonstrated a novel hydrogel system composing of Pluronic F127, carboxymethyl hexanoyl chitosan (CA) and glutaraldehyde (GA) for encapsulating fibroblasts (L-929). The thermal behavior of the hydrogel was evaluated using TGA, the swelling behavior of the hydrogel was evaluated in Dulbecco's Modified Eagle's medium (DMEM), and the mechanical properties were determined through dynamic mechanical analysis. Cells were encapsulated by simple mixing, and the viability of encapsulated cells was determined using alamar blue cell viability assay and the cells morphology was examined using fluorescent imaging. The results indicated that the Tgel of this system was around 30°C, where sol-gel transformation occurred within 90s. Although the addition of CA and GA reduced the shear moduli slightly, the F127/CA/GA gel was able to remain in gelling state in the medium for more than 1 month. In vitro cell culture study revealed that F-127/CA/GA hydrogels were non-cytotoxic. Moreover, the viability of encapsulated L929 was 106% after incubation for 5 days. Based on these results, these F127/CA/GA hydrogels can be used to encapsulate cells for tissue engineering applications.

Acid-triggered core cross-linked nanomicelles for targeted drug delivery and magnetic resonance imaging in liver cancer cells

Purpose

To research the acid-triggered core cross-linked folate-poly(ethylene glycol)-b-poly[N-(N′,N′-diisopropylaminoethyl) glutamine] (folated-PEG-P[GA-DIP]) amphiphilic block copolymer for targeted drug delivery and magnetic resonance imaging (MRI) in liver cancer cells.

Methods

As an appropriate receptor of protons, the N,N-diisopropyl tertiary amine group (DIP) was chosen to conjugate with the side carboxyl groups of poly(ethylene glycol)-b-poly (L-glutamic acid) to obtain PEG-P(GA-DIP) amphiphilic block copolymers. By ultrasonic emulsification, PEG-P(GA-DIP) could be self-assembled to form nanosized micelles loading doxorubicin (DOX) and superparamagnetic iron oxide nanoparticles (SPIONs) in aqueous solution. When PEG-P(GA-DIP) nanomicelles were combined with folic acid, the targeted effect of folated-PEG-P(GA-DIP) nanomicelles was evident in the fluorescence and MRI results.

Results

To further increase the loading efficiency and the cell-uptake of encapsulated drugs (DOX and SPIONs), DIP (pK_a≈6.3) groups were linked with ~50% of the side carboxyl groups of poly(L-glutamic acid) (PGA), to generate the core cross-linking under neutral or weakly acidic conditions. Under the acidic condition (eg, endosome/lysosome), the carboxyl groups were neutralized to facilitate disassembly of the P(GA-DIP) blocks’ cross-linking, for duly accelerating the encapsulated drug release. Combined with the tumor-targeting effect of folic acid, specific drug delivery to the liver cancer cells and MRI diagnosis of these cells were greatly enhanced.

Conclusion

Acid-triggered and folate-decorated nanomicelles encapsulating SPIONs and DOX, facilitate the targeted MRI diagnosis and therapeutic effects in tumors.

Solid dispersion formulations of megestrol acetate with copovidone for enhanced dissolution and oral bioavailability

In order to enhance the dissolution profile and oral bioavailability of megestrol acetate (MA), solid dispersions of MA (MASDs) were formulated with copovidone and crystal sugar as a hydrophilic polymeric carrier and an inert core bead, respectively. Solvent evaporation method and fluidized bed coating technique were employed. MASDs were categorized as crystalline solid dispersion by the characterization of differential scanning calorimetry and X-ray diffraction. The mass-median diameters of MASDs were in a range of 1.4 to 2.6 μm. Based on drug to polymer ratio, MASD (1:1) and (1:2) were considered as optimized formulations, resulting in a smooth-surfaced homogeneously coated layer with enhanced dissolution rate. Dissolution of MASD was gradually increased up to 15 min, after which it reached a plateau. For the initial period, dissolution rates were in the decreasing order of MASD (1:2) ≥ MASD (1:1) > MASD (1:3) > MASD (1:5) > MASD (1:0.5) > MA powder. In the comparative pharmacokinetic study with Megace OS, a reference drug product, MASD (1:1) showed improved bioavailability of over 220% with 2-fold higher C(max) and 30% faster T(max). We conclude that MASD (1:1) is a good candidate for the development of oral solid dosage forms.

Controlled Release Camptothecin Tablets based on Pluronic and Poly(acrylic acid) Copolymer. Effect of Fabrication Technique on Drug Stability, Tablet Structure, and Release Mode

Poly(ethylene oxide)-b-poly(propylene oxide)-b-(polyethylene oxide)-g-poly(acrylic acid), a graft-comb copolymer of Pluronic 127 and poly(acrylic acid) (Pluronic-PAA), was explored as an excipient for tablet dosage form of camptothecin (CPT). The tablets were prepared by either direct compression of the drug-polymer physical blend, suspension in ethanol followed by evaporation, or compression after kneading and characterized with respect to their physical structures, drug stability, and release behavior. Porosity and water uptake rate were strongly dependent on the fabrication procedure, ranking in the order: direct compression of physical blend > compression after suspension/evaporation in ethanol > compression after kneading. Tablets prepared by compression of physical blends swelled in water with a rapid surface gel layer formation that impeded swelling and disintegration of the tablets core. These tablets were able to sustain the CPT release for a period of time longer than those observed with the tablets made by either suspension/evaporation or kneading, which disintegrated within a few minutes. Despite the tablet disintegration, the CPT release was impeded for at least 6 hr, which was attributed to the ability of the Pluronic-PAA copolymers to form micellar aggregates at the hydrated surface of the particles. Physical mixing did not alter the fraction of CPT being in the pharmaceutically active lactone form, whilst the preparation of the tablets by the other two methods caused a significant reduction in the lactone form content. Tablets prepared from the physical blends demonstrated CPT release rates increasing with the pH due to the PAA ionization leading to the increase in the rate and extent of the tablet swelling. The results obtained demonstrate the potential of the Pluronic-PAA copolymers for the oral administration of chemotherapeutic agents.

Polymeric micelles in oral chemotherapy

Oral administration of anticancer agents is preferred by patients for its convenience and potential for use in outpatient and palliative setting. In addition, oral administration facilitates a prolonged exposure to the cytotoxic agents. Enhancement of bioavailability of emerging cytotoxic agents is a pre-requisite for successful development of oral modes of cancer treatment. Over the last decade, our studies have focused specifically on the utilization of large (MW>10(5)) and non-degradable polymers in oral chemotherapy. A family of block-graft copolymers of the poly(ethylene oxide) (PEO) and poly(propylene oxide) (PPO) Pluronic(R) polyethers and poly(acrylic acid) (PAA) bound by carbon-carbon bonds emerged, wherein both polymeric components are generally recognized as safe. Animal studies with Pluronic-PAA copolymers demonstrated that these molecules are excreted when administered orally and do not absorb into the systemic circulation. The Pluronic-PAA copolymers are surface-active and self-assemble, at physiological pH, into intra- and intermolecular micelles with hydrophobic cores of dehydrated PPO and multilayered coronas of hydrophilic PEO and partially ionized PAA segments. These micelles efficiently solubilize hydrophobic drugs such as paclitaxel and steroids and protect molecules such as camptothecins from the hydrolytic reactions. High surface activity of the Pluronic-PAA copolymers in water results in interactions with cell membranes and suppression of the membrane pumps such as P-glycoprotein. The ionizable carboxyls in the micellar corona facilitate mucoadhesion that enhances the residence time of the micelles and solubilized drugs in the gastrointestinal tract. Large payloads of the Pluronic-PAA micelles with weakly basic and water-soluble drugs such as doxorubicin and its analogs, mitomycin C, mitoxantrone, fluorouracil, and cyclophosphamide are achieved through electrostatic interactions with the micellar corona. Mechanical and physical properties of the Pluronic-PAA powders, blends, and micelles allow for formulation procedures where an active is simply dispersed into an aqueous Pluronic-PAA micellar formulation followed by optional lyophilization and processing into a ready dosage form. We review a number of in vivo and in vitro experiments demonstrating that that the oral administration of the cytotoxics formulated with the Pluronic-PAA copolymer micelles results in enhanced drug bioavailability.

Drug release from pH-responsive thermogelling pentablock copolymers

A novel pH-dependent injectable sustained delivery system was developed by utilizing a cationic pentablock copolymer that exhibits a thermoreversible sol-gel transition. Aqueous solutions of the pentablock copolymer, consisting of poly(2-diethylaminoethyl-methyl methacrylate)-poly(ethylene oxide)-poly(propylene oxide)-poly(ethylene oxide)-poly(2-diethylaminoethyl-methyl methacrylate) (PDEAEM(25)-PEO(100)-PPO(65)-PEO(100)-PDEAEM(25)) exhibit temperature and pH dependent micellization due to the lower critical solution temperature of the PPO blocks and the polyelectrolyte character of the PDEAEM blocks, respectively. Aqueous solutions of the copolymers above 12 wt % are free flowing liquids at room temperature and form elastic physical hydrogels reversibly above 37 degrees C. Hydrophobic probe absorbance studies indicate that pentablock copolymer micelles increase the solubility of sparingly soluble drugs. Solutions of the pentablock copolymer that form gels at body temperature exhibit sustained zero-order release in in vitro experiments. The release rates of model drugs and proteins were significantly influenced by the pH of the release media, thereby making these polymers ideal candidates for modulated drug delivery.