Arthemeter-loaded lipid nanoparticles produced by modified thin-film hydration: Pharmacokinetics, toxicological and in vivo anti-malarial activity

Incompatibility of antimalarial drugs: challenges in formulating combination products for malaria

Lipophilic drugs require more advance formulation, especially if the intention is to make solutions or semisolid formulations. This also accounts for most antimalarial drugs. Although some of these antimalarial drugs are soluble in lipid vehicles, few of them, such as lumefantrine (LF), are also poorly soluble in oily vehicles. Trying to dissolve and formulate LF as a liquid formulation together with other antimalarial drugs is, therefore, a major task. When mixed in solution together with artemether (AR), precipitation occurs, sometimes with LF precipitating out on its own, and sometimes with AR precipitating out alongside LF. In this study, it was hypothesized that the use of fatty acids could lead to enhanced solubility in lipid formulation. Addition of the fatty acid solved the dissolution challenges, making LF soluble for over a year at room temperature (21-23 °C); but further research is needed to test the mechanism of action of the fatty acid. In addition, design of experiments (MODDE® 13) revealed that the amount of fatty acid in the formulation was the only significant factor for LF precipitation.

Impact of formulation parameters on self-assembled liposomes (LeciPlex® III): A detailed investigation

The present study investigated the feasibility of fabricating self-assembled liposomes, LeciPlex®, a phospholipid-based vesicular nanocarrier using cationic, anionic, and nonionic stabilizers. The phospholipid investigated was soy phosphatidylcholine and the nano-precipitation method based on solvent diffusion was applied as the fabrication technique of liposomes in this study. The effects of various formulation variables, such as lipid and stabilizer concentration, total solid concentration, and solvent type on the self-assembly of vesicles were studied for physical characterization including particle size analysis, differential scanning calorimetry, viscosity, optical transmittance, transmission electron microscopy, and small angle neutron scattering. All three LeciPlex® systems exhibited a direct relationship between particle size and phospholipid concentration. The two categoric variables, solvent, and stabilizer used to prepare LeciPlex® demonstrated a significant effect on particle size for all three LeciPlex® systems. Small angle neutron scattering, and optical transmittance confirmed the formation of micellar systems at a phospholipid: stabilizer ratio of 1:2 and vesicular systems at a ratio of 2:1 for the systems stabilized with anionic and nonionic surfactants. In contrast to this, the LeciPlex® formed with the cationic stabilizer Dioctadecyldimethylammonium bromide (DODAB), formed vesicles at both ratios. From these investigations, it was clear that the formulation space for LeciPlex® was diversified by the addition of cationic, anionic, and non-ionic stabilizers.

Analysis of complementarities between nanomedicine and phytodrugs for the treatment of malarial infection

The use of nanocarriers in medicine, so-called nanomedicine, is one of the most innovative strategies for targeting drugs at the action site and increasing their activity index and effectiveness. Phytomedicine is the oldest traditional method used to treat human diseases and solve health problems. The recent literature on the treatment of malaria infections using nanodelivery systems and phytodrugs or supplements has been analyzed. For the first time, in the present review, a careful look at the considerable potential of nanomedicine in promoting phytotherapeutic efficacy was done, and its key role in addressing a translation through a significant reduction of the current burden of malaria in many parts of the world has been underlined.

Concept for a Unidirectional Release Mucoadhesive Buccal Tablet for Oral Delivery of Antidiabetic Peptide Drugs Such as Insulin, Glucagon-like Peptide 1 (GLP-1), and their Analogs

Injectable peptides such as insulin, glucagon-like peptide 1 (GLP-1), and their agonists are being increasingly used for the treatment of diabetes. Currently, the most common route of administration is injection, which is linked to patient discomfort as well as being subjected to refrigerated storage and the requirement for efficient supply chain logistics. Buccal and sublingual routes are recognized as valid alternatives due to their high accessibility and easy administration. However, there can be several challenges, such as peptide selection, drug encapsulation, and delivery system design, which are linked to the enhancement of drug efficacy and efficiency. By using hydrophobic polymers that do not dissolve in saliva, and by using neutral or positively charged nanoparticles that show better adhesion to the negative charges generated by the sialic acid in the mucus, researchers have attempted to improve drug efficiency and efficacy in buccal delivery. Furthermore, unidirectional films and tablets seem to show the highest bioavailability as compared to sprays and other buccal delivery vehicles. This advantageous attribute can be attributed to their capability to mitigate the impact of saliva and inadvertent gastrointestinal enzymatic digestion, thereby minimizing drug loss. This is especially pertinent as these formulations ensure a more directed drug delivery trajectory, leading to heightened therapeutic outcomes. This communication describes the current state of the art with respect to the creation of nanoparticles containing peptides such as insulin, glucagon-like peptide 1 (GLP-1), and their agonists, and theorizes the production of mucoadhesive unidirectional release buccal tablets or films. Such an approach is more patient-friendly and can improve the lives of millions of diabetics around the world; in addition, these shelf-stable formulations ena a more environmentally friendly and sustainable supply chain network.

Continuous production of lipid nanoparticles by multiple-splitting in microfluidic devices with chaotic microfibrous channels

Polydimethylsiloxane (PDMS) microfluidic devices with chaotic microfibrous channels were fabricated for the continuous production of lipid nanoparticles (LNPs). Electrospun poly(ε-caprolactone) (PCL) microfibrous matrices with different diameters (3.6 ± 0.3, 6.3 ± 0.4, and 12.2 ± 0.8 µm) were used as a template to develop microfibrous channels. The lipid solution (in ethanol) and water phase were introduced into the microfluidic device as the discontinuous and continuous phases, respectively. The smaller diameter of microfibrous channels and the higher flow rate of the continuous phase resulted in the smaller LNPs with a narrower size distribution. The multiple-splitting of the discontinuous phase and the microscale contact between the two phases in the microfibrous channels were the key features of the LNP production in our approach. The LNPs containing doxorubicin with different average sizes (89.7 ± 35.1 and 190.4 ± 66.4 nm) were prepared using the microfluidic devices for the potential application in tumor therapy. In vitro study revealed higher cellular uptake efficiency and cytotoxicity of the smaller LNPs, especially in the HepG2 cells. The microfluidic devices with microfibrous channels can be widely used as a continuous and high-throughput platform for the production of LNPs containing various active agents.

High-Precision Synthesis of RNA-Loaded Lipid Nanoparticles for Biomedical Applications

The recent development of RNA-based therapeutics in delivering nucleic acids for gene editing and regulating protein translation has led to the effective treatment of various diseases including cancer, inflammatory and genetic disorder, as well as infectious diseases. Among these, lipid nanoparticles (LNP) have emerged as a promising platform for RNA delivery and have shed light by resolving the inherent instability issues of naked RNA and thereby enhancing the therapeutic potency. These LNP consisting of ionizable lipid, helper lipid, cholesterol, and poly(ethylene glycol)-anchored lipid can stably enclose RNA and help them release into the cells' cytosol. Herein, the significant progress made in LNP research starting from the LNP constituents, formulation, and their diverse applications is summarized first. Moreover, the microfluidic methodologies which allow precise assembly of these newly developed constituents to achieve LNP with controllable composition and size, high encapsulation efficiency as well as scalable production are highlighted. Furthermore, a short discussion on current challenges as well as an outlook will be given on emerging approaches to resolving these issues.

Polyester Nanocapsules for Intravenous Delivery of Artemether: Formulation Development, Antimalarial Efficacy, and Cardioprotective Effects In Vivo

Artemether (ATM) is an effective antimalarial drug that also has a short half-life in the blood. Furthermore, ATM is also cardiotoxic and is associated with pro-arrhythmogenic risks. We aimed to develop a delivery system enabling the prolonged release of ATM into the blood coupled with reduced cardiotoxicity. To achieve this, we prepared polymeric nanocapsules (NCs) from different biodegradable polyesters, namely poly(D,L-lactide) (PLA), poly-ε-caprolactone (PCL), and surface-modified NCs, using a monomethoxi-polyethylene glycol-block-poly(D,L-lactide) (PEG5kDa-PLA45kDa) polymer. Using this approach, we were able to encapsulate high yields of ATM (>85%, 0−4 mg/mL) within the oily core of the NCs. The PCL-NCs exhibited the highest percentage of ATM loading as well as a slow release rate. Atomic force microscopy showed nanometric and spherical particles with a narrow size dispersion. We used the PCL NCs loaded with ATM for biological evaluation following IV administration. As with free-ATM, the ATM-PCL-NCs formulation exhibited potent antimalarial efficacy using either the “Four-day test” protocol (ATM total at the end of the 4 daily doses: 40 and 80 mg/kg) in Swiss mice infected with P. berghei or a single low dose (20 mg/kg) of ATM in mice with higher parasitemia (15%). In healthy rats, IV administration of single doses of free-ATM (40 or 80 mg/kg) prolonged cardiac QT and QTc intervals and induced both bradycardia and hypotension. Repeated IV administration of free-ATM (four IV doses at 20 mg/kg every 12 h for 48 h) also prolonged the QT and QTc intervals but, paradoxically, induced tachycardia and hypertension. Remarkably, the incorporation of ATM in ATM-PCL-NCs reduced all adverse effects. In conclusion, the encapsulation of ATM in biodegradable polyester NCs reduces its cardiovascular toxicity without affecting its antimalarial efficacy.

Microfluidic Manufacture of Lipid-Based Nanomedicines

Nanoparticulate technologies have revolutionized drug delivery allowing for passive and active targeting, altered biodistribution, controlled drug release (temporospatial or triggered), enhanced stability, improved solubilization capacity, and a reduction in dose and adverse effects. However, their manufacture remains immature, and challenges exist on an industrial scale due to high batch-to-batch variability hindering their clinical translation. Lipid-based nanomedicines remain the most widely approved nanomedicines, and their current manufacturing methods remain discontinuous and face several problems such as high batch-to-batch variability affecting the critical quality attributes (CQAs) of the product, laborious multistep processes, need for an expert workforce, and not being easily amenable to industrial scale-up involving typically a complex process control. Several techniques have emerged in recent years for nanomedicine manufacture, but a paradigm shift occurred when microfluidic strategies able to mix fluids in channels with dimensions of tens of micrometers and small volumes of liquid reagents in a highly controlled manner to form nanoparticles with tunable and reproducible structure were employed. In this review, we summarize the recent advancements in the manufacturing of lipid-based nanomedicines using microfluidics with particular emphasis on the parameters that govern the control of CQAs of final nanomedicines. The impact of microfluidic environments on formation dynamics of nanomaterials, and the application of microdevices as platforms for nanomaterial screening are also discussed.

mRNA Vaccine Development for Emerging Animal and Zoonotic Diseases

In the prevention and treatment of infectious diseases, mRNA vaccines hold great promise because of their low risk of insertional mutagenesis, high potency, accelerated development cycles, and potential for low-cost manufacture. In past years, several mRNA vaccines have entered clinical trials and have shown promise for offering solutions to combat emerging and re-emerging infectious diseases such as rabies, Zika, and influenza. Recently, the successful application of mRNA vaccines against COVID-19 has further validated the platform and opened the floodgates to mRNA vaccine's potential in infectious disease prevention, especially in the veterinary field. In this review, we describe our current understanding of the mRNA vaccines and the technologies used for mRNA vaccine development. We also provide an overview of mRNA vaccines developed for animal infectious diseases and discuss directions and challenges for the future applications of this promising vaccine platform in the veterinary field.

Physicochemical and biopharmaceutical aspects influencing skin permeation and role of SLN and NLC for skin drug delivery

The skin is a complex and multifunctional organ, in which the static versus dynamic balance is responsible for its constant adaptation to variations in the external environment that is continuously exposed. One of the most important functions of the skin is its ability to act as a protective barrier, against the entry of foreign substances and against the excessive loss of endogenous material. Human skin imposes physical, chemical and biological limitations on all types of permeating agents that can cross the epithelial barrier. For a molecule to be passively permeated through the skin, it must have properties, such as dimensions, molecular weight, pKa and hydrophilic-lipophilic gradient, appropriate to the anatomy and physiology of the skin. These requirements have limited the number of commercially available products for dermal and transdermal administration of drugs. To understand the mechanisms involved in the drug permeation process through the skin, the approach should be multidisciplinary in order to overcome biological and pharmacotechnical barriers. The study of the mechanisms involved in the permeation process, and the ways to control it, can make this route of drug administration cease to be a constant promise and become a reality. In this work, we address the physicochemical and biopharmaceutical aspects encountered in the pathway of drugs through the skin, and the potential added value of using solid lipid nanoparticles (SLN) and nanostructured lipid vectors (NLC) to drug permeation/penetration through this route. The technology and architecture for obtaining lipid nanoparticles are described in detail, namely the composition, production methods and the ability to release pharmacologically active substances, as well as the application of these systems in the vectorization of various pharmacologically active substances for dermal and transdermal applications. The characteristics of these systems in terms of dermal application are addressed, such as biocompatibility, occlusion, hydration, emollience and the penetration of pharmacologically active substances. The advantages of using these systems over conventional formulations are described and explored from a pharmaceutical point of view.

The immunosuppressive activity of artemisinin-type drugs towards inflammatory and autoimmune diseases

The sesquiterpene lactone artemisinin from Artemisia annua L. is well established for malaria therapy, but its bioactivity spectrum is much broader. In this review, we give a comprehensive and timely overview of the literature regarding the immunosuppressive activity of artemisinin-type compounds toward inflammatory and autoimmune diseases. Numerous receptor-coupled signaling pathways are inhibited by artemisinins, including the receptors for interleukin-1 (IL-1), tumor necrosis factor-α (TNF-α), β3-integrin, or RANKL, toll-like receptors and growth factor receptors. Among the receptor-coupled signal transducers are extracellular signal-regulated protein kinase (ERK), c-Jun N-terminal kinase (JNK), phosphatidylinositol-4,5-bisphosphate 3-kinase (PI3K), AKT serine/threonine kinase (AKT), mitogen-activated protein kinase (MAPK)/extracellular signal regulated kinase (ERK) kinase (MEK), phospholipase C γ1 (PLCγ), and others. All these receptors and signal transduction molecules are known to contribute to the inhibition of the transcription factor nuclear factor κ B (NF-κB). Artemisinins may inhibit NF-κB by silencing these upstream pathways and/or by direct binding to NF-κB. Numerous NF-κB-regulated downstream genes are downregulated by artemisinin and its derivatives, for example, cytokines, chemokines, and immune receptors, which regulate immune cell differentiation, apoptosis genes, proliferation-regulating genes, signal transducers, and genes involved in antioxidant stress response. In addition to the prominent role of NF-κB, other transcription factors are also inhibited by artemisinins (mammalian target of rapamycin [mTOR], activating protein 1 [AP1]/FBJ murine osteosarcoma viral oncogene homologue [FOS]/JUN oncogenic transcription factor [JUN]), hypoxia-induced factor 1α (HIF-1α), nuclear factor of activated T cells c1 (NF-ATC1), Signal transducers and activators of transcription (STAT), NF E2-related factor-2 (NRF-2), retinoic-acid-receptor-related orphan nuclear receptor γ (ROR-γt), and forkhead box P-3 (FOXP-3). Many in vivo experiments in disease-relevant animal models demonstrate therapeutic efficacy of artemisinin-type drugs against rheumatic diseases (rheumatoid arthritis, osteoarthritis, lupus erythematosus, arthrosis, and gout), lung diseases (asthma, acute lung injury, and pulmonary fibrosis), neurological diseases (autoimmune encephalitis, Alzheimer's disease, and myasthenia gravis), skin diseases (dermatitis, rosacea, and psoriasis), inflammatory bowel disease, and other inflammatory and autoimmune diseases. Randomized clinical trials should be conducted in the future to translate the plethora of preclinical results into clinical practice.

Artemether-Loaded Zein Nanoparticles: An Innovative Intravenous Dosage Form for the Management of Severe Malaria

Artemether, an artemisinin derivative, is used in the management of life-threatening severe malaria. This study aimed to develop an intravenous dosage form of artemether using nanotechnology. Artemether-loaded zein nanoparticles were prepared by modified antisolvent precipitation using sodium caseinate as a stabilizer. Subsequently, the physicochemical properties of the nanoparticles were characterized; the in vitro hemolytic property was examined with red blood cells, while the pharmacokinetic profile was evaluated in Sprague–Dawley rats after intravenous administration. The artemether-loaded zein nanoparticles were found to display good encapsulation efficiency, excellent physical stability and offer an in vitro extended-release property. Interestingly, encapsulation of artemether into zein nanoparticles substantially suppressed hemolysis, a common clinical phenomenon occurring after artemisinin-based antimalarial therapy. Upon intravenous administration, artemether-loaded zein nanoparticles extended the mean residence time of artemether by ~80% in comparison to the free artemether formulation (82.9 ± 15.2 versus 45.6 ± 16.4 min, p < 0.01), suggesting that the nanoparticles may prolong the therapeutic duration and reduce the dosing frequency in a clinical setting. In conclusion, intravenous delivery of artemether by artemether-loaded zein nanoparticles appears to be a promising therapeutic option for severe malaria.

Therapeutic Nanoemulsion: Concept to Delivery

Nanoemulsions (NEs) or nanometric-scaled emulsions are transparent or translucent, optically isotropic and kinetically stable heterogeneous system of two different immiscible liquids namely, water and oil stabilized with an amphiphilic surfactant having droplet size ranges up to 100 nm. They offer a variety of potential interests for certain applications: improved deep-rooted stability; excellent optical clarity; and, enhanced bioavailability due to its nanoscale of particles. Though there is still comparatively narrow insight apropos design, development, and optimization of NEs, which mainly stems from the fact that conventional characteristics of emulsion development and stabilization only partly apply to NEs. The contemporary article focuses on the nanoemulsion dosage form journey from concept to key application in drug delivery. In addition, industrial scalability of the nanoemulsion, as well as its presence in commercial and clinical practice, are also addressed.

Croton argyrophyllus Kunth Essential Oil-Loaded Solid Lipid Nanoparticles: Evaluation of Release Profile, Antioxidant Activity and Cytotoxicity in a Neuroblastoma Cell Line

The essential oil from Croton argyrophyllus Kunth is known for its antiproliferative, anti-inflammatory, antinociceptive, and anticancer activities, and is recognized as a source of phytochemicals for potential use in pharmaceutic and food sectors. Solid lipid nanoparticles (SLN) have been produced to load Croton argyrophyllus (CA) Kunth essential oil (CAEO) and its antioxidant properties evaluated in vitro as a new approach for the treatment of neurodegenerative diseases. Cetyl palmitate SLN loading CAEO (CAEO-SLN) with a mean particle size of 201.4 ± 2.3 nm (polydispersity index 0.211) have been produced by hot high-pressure homogenisation. The release of the oil followed the Korsmeyers-Peppas model. The risk of lipid peroxidation has been determined by applying the production of thiobarbituric acid-reactive substances (TBARS) standard assay. The antioxidant activity was determined by the capacity of the antioxidants existing in CAEO to scavenge the stable radical DPPH•. The cytotoxicity of CA Kunth essential oil-loaded SLN (CAEO-SLN) was evaluated in a human cell line SH-SY5Y (derived from human neuroblastoma) by determining the reduction of the yellow dye 3-(4,5-dimethyl-2-thiazolyl)-2,5-diphenyl-2H-tetrazolium bromide (MTT). Both free essential oil (fEO) and loaded essential oil (CAEO-SLN) were demonstrated to inhibit the Fenton reaction. CAEO-SLN showed DPPH• radical scavenging capacity. The loading of the oil into cetyl palmitate SLN reduced the risk of cytotoxicity.

Mechanisms of artemether toxicity on single cardiomyocytes and protective effect of nanoencapsulation

BACKGROUND AND PURPOSE

The artemisinin derivative, artemether, has antimalarial activity with potential neurotoxic and cardiotoxic effects. Artemether in nanocapsules (NC-ATM) is more efficient than free artemether for reducing parasitaemia and increasing survival of Plasmodium berghei-infected mice. NCs also prevent prolongation of the QT interval of the ECG. Here, we assessed cellular cardiotoxicity of artemether and how this toxicity was prevented by nanoencapsulation.

EXPERIMENTAL APPROACH

Mice were treated with NC-ATM orally (120 mg·kg^-1 twice daily) for 4 days. Other mice received free artemether, blank NCs, and vehicle for comparison. We measured single-cell contraction, intracellular Ca²⁺ transient using fluorescent Indo-1AM Ca²⁺ dye, and electrical activity using the patch-clamp technique in freshly isolated left ventricular myocytes. The acute effect of free artemether was also tested on cardiomyocytes of untreated animals.

KEY RESULTS

Artemether prolonged action potentials (AP) upon acute exposure (at 0.1, 1, and 10 μM) of cardiomyocytes from untreated mice or after in vivo treatment. This prolongation was unrelated to blockade of K⁺ currents, increased Ca²⁺ currents or promotion of a sustained Na⁺ current. AP lengthening was abolished by the NCX inhibitor SEA-0400. Artemether promoted irregular Ca²⁺ transients during pacing and spontaneous Ca²⁺ events during resting periods. NC-ATM prevented all effects. Blank NCs had no effects compared with vehicle.

CONCLUSION AND IMPLICATIONS

Artemether induced NCX-dependent AP lengthening (explaining QTc prolongation) and disrupted Ca²⁺ handling, both effects increasing pro-arrhythmogenic risks. NCs prevented these adverse effects, providing a safe alternative to the use of artemether alone, especially to treat malaria.

Nanoparticles Formulations of Artemisinin and Derivatives as Potential Therapeutics for the Treatment of Cancer, Leishmaniasis and Malaria

Cancer, malaria, and leishmaniasis remain the deadly diseases around the world although several strategies of treatment have been developed. However, most of the drugs used to treat the aforementioned diseases suffer from several pharmacological limitations such as poor pharmacokinetics, toxicity, drug resistance, poor bioavailability and water solubility. Artemisinin and its derivatives are antimalarial drugs. However, they also exhibit anticancer and antileishmanial activity. They have been evaluated as potential anticancer and antileishmanial drugs but their use is also limited by their poor water solubility and poor bioavailability. To overcome the aforementioned limitations associated with artemisinin and its derivatives used for the treatment of these diseases, they have been incorporated into nanoparticles. Several researchers incorporated this class of drugs into nanoparticles resulting in enhanced therapeutic outcomes. Their potential efficacy for the treatment of parasitic infections such as malaria and leishmaniasis and chronic diseases such as cancer has been reported. This review article will be focused on the nanoparticles formulations of artemisinin and derivatives for the treatment of cancer, malaria, and leishmaniasis and the biological outcomes (in vitro and in vivo).

Combination Therapies of Artemisinin and its Derivatives as a Viable Approach for Future Cancer Treatment

BACKGROUND

Many anticancer drugs have been developed for clinical usage till now, but the major problem is the development of drug-resistance over a period of time in the treatment of cancer. Anticancer drugs produce huge adverse effects, ultimately leading to death of the patient. Researchers have been focusing on the development of novel molecules with higher efficacy and lower toxicity; the anti-malarial drug artemisinin and its derivatives have exhibited cytotoxic effects.

METHODS

We have done extensive literature search for artemisinin for its new role as anti-cancer agent for future treatment. Last two decades papers were referred for deep understanding to strengthen its role.

RESULT

Literature shows changes at 9, 10 position in the artemisinin structure produces anticancer activity. Artemisinin shows anticancer activity in leukemia, hepatocellular carcinoma, colorectal and breast cancer cell lines. Artemisinin and its derivatives have been studied as combination therapy with several synthetic compounds, RNA interfaces, recombinant proteins and antibodies etc., for synergizing the effect of these drugs. They produce an anticancer effect by causing cell cycle arrest, regulating signaling in apoptosis, angiogenesis and cytotoxicity activity on the steroid receptors. Many novel formulations of artemisinin are being developed in the form of carbon nanotubes, polymer-coated drug particles, etc., for delivering artemisinin, since it has poor water/ oil solubility and is chemically unstable.

CONCLUSION

We have summarize the combination therapies of artemisinin and its derivatives with other anticancer drugs and also focussed on recent developments of different drug delivery systems in the last 10 years. Various reports and clinical trials of artemisinin type drugs indicated selective cytotoxicity along with minimal toxicity thus projecting them as promising anti-cancer agents in future cancer therapies.

Resveratrol-loaded folate targeted lipoprotein-mimetic nanoparticles with improved cytotoxicity, antioxidant activity and pharmacokinetic profile

The aim of present study was to develop folate receptor targeted lipoprotein-mimetic nanoparticles of resveratrol (RSV). Lipoprotein-mimicking nanocarrier (RSV-FA-LNPs) comprising of phosphatidyl choline, cholesterol, stearyl amine and folic acid-tagged bovine serum albumin (FA-BSA) were prepared. Folic acid was conjugated to bovine serum albumin by amide bond at a binding rate of 9.46 ± 0.49 folate molecules per bovine serum albumin. The particle size and entrapment efficiency of the developed nanoparticles was found to be 291.37 ± 3.81 nm and 91.96 ± 1.83%, respectively. The in vitro release study depicted that developed nanocarrier prolonged the drug release till 72 h in phosphate buffer saline (pH 7.4). The anticancer potential of RSV in case of RSV-FA-LNPs was found to be substantially improved against MCF-7 cells overexpressing folate receptors compared to non-targeted nanoparticles. The pharmacokinetics studies after intravenous administration in healthy Wistar rats depicted that lipoprotein mimicking nanoparticles presented the longer circulation time (>48 h) compared to free drug which disappeared in few hours (6 h). The in vitro and preclinical findings of the present study demonstrated the applicability of lipoprotein mimicking nanocarriers for the safer and effective delivery of bioactives.

SLN and NLC for topical, dermal, and transdermal drug delivery

Introduction: From a biopharmaceutical standpoint, the skin is recognized as an interesting route for drug delivery. In general, small molecules are able to penetrate the stratum corneum, the outermost layer of the skin. In contrast, the delivery of larger molecules, such as peptides and proteins, remains a challenge. Nanoparticles have been exploited not only to enhance skin penetration of drugs but also to expand the range of molecules to be clinically used.Areas covered: This review focus on Solid lipid nanoparticles (SLN) and Nanostructured lipid carriers (NLC) for skin administration. We discuss the selection criteria for lipids, surfactants, and surface modifiers commonly in use in SLN/NLC, their production techniques, and the range of drugs loaded in these lipid nanoparticles for the treatment of skin disorders.Expert opinion: Depending on the lipid and surfactant composition, different nanoparticle morphologies can be generated. Both SLN and NLC are composed of lipids that resemble those of the skin and sebum, which contribute to their enhanced biocompatibility, with limited toxicological risk. SLN and NLC can be loaded with very chemically different drugs, may provide a tunable release profile, can be produced in a sterilized environment, and be scaled-up without the need for organic solvents.

Recent strategies and advances in the fabrication of nano lipid carriers and their application towards brain targeting

In last two decades, the lipid nanocarriers have been extensively investigated for their drug targeting efficiency towards the critical areas of the human body like CNS, cardiac region, tumor cells, etc. Owing to the flexibility and biocompatibility, the lipid-based nanocarriers, including nanoemulsion, liposomes, SLN, NLC etc. have gained much attention among various other nanocarrier systems for brain targeting of bioactives. Across different lipid nanocarriers, NLC remains to be the safest, stable, biocompatible and cost-effective drug carrier system with high encapsulation efficiency. Drug delivery to the brain always remains a challenging issue for scientists due to the complex structure and various barrier mechanisms surrounding the brain. The application of a suitable nanocarrier system and the use of any alternative route of drug administration like nose-to-brain drug delivery could overcome the hurdle and improves the therapeutic efficiency of CNS acting drugs thereof. NLC, a second-generation lipid nanocarrier, upsurges the drug permeation across the BBB due to its unique structural properties. The biocompatible lipid matrix and nano-size make it an ideal drug carrier for brain targeting. It offers many advantages over other drug carrier systems, including ease of manufacturing and scale-up to industrial level, higher drug targeting, high drug loading, control drug release, compatibility with a wide range of drug substances, non-toxic and non-irritant behavior. This review highlights recent progresses towards the development of NLC for brain targeting of bioactives with particular reference to its surface modifications, formulations aspects, pharmacokinetic behavior and efficacy towards the treatment of various neurological disorders like AD, PD, schizophrenia, epilepsy, brain cancer, CNS infection (viral and fungal), multiple sclerosis, cerebral ischemia, and cerebral malaria. This work describes in detail the role and application of NLC, along with its different fabrication techniques and associated limitations. Specific emphasis is given to compile a summary and graphical data on the area explored by scientists and researchers worldwide towards the treatment of neurological disorders with or without NLC. The article also highlights a brief insight into two prime approaches for brain targeting, including drug delivery across BBB and direct nose-to-brain drug delivery along with the current global status of specific neurological disorders.

Metformin-Encapsulated Liposome Delivery System: An Effective Treatment Approach against Breast Cancer

This study aimed at developing metformin hydrochloride (Met) encapsulated liposomal vesicles for enhanced therapeutic outcomes at reduced doses against breast cancer. Liposomal Met was prepared using thin-film hydration through various loading methods; passive loading, active loading, and drug-loaded lipid film. The drug-loaded film method exhibited maximum entrapment efficiency (~65%) as compared to active loading (~25%) and passive loading (~5%) prepared Met-loaded liposomes. The therapeutic efficacy of these optimized liposomes was evaluated for cellular uptake, cytotoxicity, inhibition of metastatic activity, and apoptosis-inducing activity. Results demonstrated significantly superior activity of positively charged liposomes resulting in reduced IC₅₀ values, minimal cell migration activity, reduced colony formation, and profound apoptosis-induced activity in breast cancer cells as compared to Met. The anti-tumor activity was investigated using a clinically relevant in vitro tumor simulation model, which confirmed enhanced anti-tumorigenic property of liposomal Met over Met itself. To the authors’ knowledge, this is the first report of Met-loaded liposomes for improving the efficacy and therapeutic effect of Met against breast cancer. With the results obtained, it can be speculated that liposomal encapsulation of metformin offers a potentially promising and convenient approach for enhanced efficacy and bioavailability in breast cancer treatment.

Effect of nanoparticles on the therapeutic efficacy of praziquantel against Schistosoma mansoni infection in murine models

Praziquantel (PZQ) is the main treatment of Schistosomiasis mansoni. However, resistance to it was described. So, there is a necessity to develop novel drugs or to enhance the present drugs. This work aimed to assess the efficacy of PZQ alone and when loaded on liposomes in treatment of S. mansoni infection by parasitological and histopathological studies in experimental murine models. 112 male laboratories bred Swiss Albino mice were used in this work. They were divided into four groups: Group 1: control group; Group 2: infected then treated by PZQ (500 mg/kg) at 7, 30 and 45 days post infection; Group 3: infected then treated by liposome encapsulated PZQ (lip.PZQ) (500 mg/kg) at 7, 30 and 45 days post infection; Group 4: infected then treated by free liposomes at 7, 30 and 45 days post infection. The results showed that G3 caused the highest significant reduction of the total worm count, eggs/gram liver tissue and intestine (97.2%, 99.3%, 99.5%) respectively. Followed by G2 (85.1%, 97.6%, 89.8%) respectively. Regarding the histopathological studies, G3 showed the highest significant reduction in number and diameter of hepatic granuloma (97.6% and 98.1%), followed by G2 (77.2% and 75%) when compared to other groups. In conclusion, lip.PZQ is more effective than free PZQ from all aspects especially when administered 45 days PI.

Combination drug therapy via nanocarriers against infectious diseases

Current drug therapy against infections is threatening to become obsolete due to the poor physical, chemical, biological and pharmacokinetic properties of drugs, followed by high risk of acquiring resistance. Taking into account the significant benefits of nanotechnology, nano-based delivery of anti-infectious agents is emerging as a potential approach to combat several lethal infections. Co-delivery of multiple anti-infectious agents in a single nano-based system is beginning to show significant advantages over mono-therapy, such as synergism, enhanced anti-microbial activity, broad anti-microbial spectrum, reduced resistance development, and improved and cost-effective treatment. The current review provides a detailed update on the status of various lipid and polymer based nano-systems used to co-deliver multiple anti-infectious agents against bacterial, HIV and malarial infections. It also identifies current key challenges and suggests strategies to overcome them, thus guiding formulation scientists to further optimize nano-based co-drug delivery as an approach to fight infections effectively.

Mediterranean essential oils as precious matrix components and active ingredients of lipid nanoparticles

Essential oils are recognized as valuable active pharmaceutical ingredients attributed to a set of biological properties, which include antibacterial, antifungal, antiviral, antioxidant, anticancer, immune-modulatory, analgesic and anti-inflammatory activities. Their use in pharmaceutics is however compromised by their limited water solubility and low physicochemical stability (i.e. volatility, oxidation). In order to overcome these limitations, we aimed to develop nanostructured lipid carriers (NLC) as delivery systems for Mediterranean essential oils, in particular Rosmarinus officinalis L., Lavandula x intermedia "Sumian", Origanum vulgare subsp. hirtum and Thymus capitatus essential oils, selected on the basis of their antioxidant and anti-inflammatory activities. NLC composed of Softisan (as solid lipid) have been produced by phase inversion temperature (PIT) and high-pressure homogenization (HPH), using two different emulsifiers systems. Particles have been further characterized for their mean particle size, polydispersity, zeta potential, morphology and chemical interactions. Best NLC formulations were obtained with Kolliphor/Labrafil as surfactants, and using Rosmarinus, Lavandula and Origanum as essential oils (PDI between 0.126 and 0.141, Zave < 200 nm). Accelerated stability studies have also been carried out to estimate the effect of the production method and surfactant composition on the long-term stability of EOs-loaded NLC. In vitro biological cell viability and anti-inflammatory activities were evaluated in Raw 264.7 cells (macrophage cell line), while in vitro antioxidant activity was checked by DPPH assay. Lavandula and Rosmarinus NLC were shown to be the most biocompatible formulations up to a concentration of 0.1% (v/v), whereas they were able to induce a dose-dependent anti-inflammatory activity in the order Lavandula > Rosmarinus ≥ Origanum.

Recent developments in solid lipid nanoparticle and surface-modified solid lipid nanoparticle delivery systems for oral delivery of phyto-bioactive compounds in various chronic diseases

Solid lipid nanoparticle (SLN) delivery systems have a wide applicability in the delivery of phyto-bioactive compounds to treat various chronic diseases, including diabetes, cancer, obesity and neurodegenerative diseases. The multiple benefits of SLN delivery include improved stability, smaller particle size, leaching prevention and enhanced lymphatic uptake of the bioactive compounds through oral delivery. However, the burst release makes the SLN delivery systems inadequate for the oral delivery of various phyto-bioactive compounds that can treat such chronic diseases. Recently, the surface-modified SLN (SMSLN) was observed to overcome this limitation for oral delivery of phyto-bioactive compounds, and there is growing evidence of an enhanced uptake of curcumin delivered orally via SMSLNs in the brain. This review focuses on different SLN and SMSLN systems that are useful for oral delivery of phyto-bioactive compounds to treat various chronic diseases.

Preparation and Evaluation of Artemether Liposomes for Enhanced Anti-Tumor Therapy

The aim of the study was to design liposomes (Lips) of artemether (ARM), a plant-derived drug for treatment of metastatic tumors, for the intravenous delivery. The ARM-Lips were prepared using ethanol injection method. Based on the optimization of formulation with single-factor experiments, ARM-Lips were spherical with a uniform particle size (187.3 ± 1.83) nm and its EE and DL were (94.49 ± 1.18)% and (10.94 ± 0.10)%, respectively. The in vitro drug release characteristics of ARM-Lips possessed a sustained release characteristic, and their behavior was in accordance with the first-order kinetics equation. In vivo, after intravenous injection to mice, the t1/2β, MRT, and AUC of ARM-Lips were 8.38-, 3.38-, and 3.11-fold those of ARM solution (ARM-Sol), respectively. In the pharmacodynamics studies, the tumor doubling time, growth inhibition rate, and specific growth rate of tumor of ARM-Lips were 1.97 times, 1.54 times, and 0.51 times those of ARM-Sol, respectively, which indicated that the anti-tumor effect of ARM-Lips was significantly stronger than that of ARM-Sol. These encouraging results revealed that ARM-Lips would serve as an efficient carrier for ARM for increasing therapeutic efficacy on tumor.

Reduced cardiotoxicity and increased oral efficacy of artemether polymeric nanocapsules in Plasmodium berghei-infected mice

Artemether (ATM) cardiotoxicity, its short half-life and low oral bioavailability are the major limiting factors for its use to treat malaria. The purposes of this work were to study free-ATM and ATM-loaded poly-ε-caprolactone nanocapules (ATM-NC) cardiotoxicity and oral efficacy on Plasmodium berghei-infected mice. ATM-NC was obtained by interfacial polymer deposition and ATM was associated with polymeric NC oily core. For cardiotoxicity evaluation, male black C57BL6 uninfected or P. berghei-infected mice received, by oral route twice daily/4 days, vehicle (sorbitol/carboxymethylcellulose), blank-NC, free-ATM or ATM-NC at doses 40, 80 or 120 mg kg-1. Electrocardiogram (ECG) lead II signal was obtained before and after treatment. For ATM efficacy evaluation, female P. berghei-infected mice were treated the same way. ATM-NC improved antimalarial in vivo efficacy and reduced mice mortality. Free-ATM induced significantly QT and QTc intervals prolongation. ATM-NC (120 mg kg-1) given to uninfected mice reduced QT and QTc intervals prolongation 34 and 30%, respectively, compared with free-ATM. ATM-NC given to infected mice also reduced QT and QTc intervals prolongation, 28 and 27%, respectively. For the first time, the study showed a nanocarrier reducing cardiotoxicity of ATM given by oral route and it was more effective against P. berghei than free-ATM as monotherapy.

Pullulan-coated phospholipid and Pluronic F68 complex nanoparticles for carrying IR780 and paclitaxel to treat hepatocellular carcinoma by combining photothermal therapy/photodynamic therapy and chemotherapy

IR780, a near-infrared dye, can also be used as a photosensitizer both for photothermal therapy (PTT) and photodynamic therapy (PDT). In this study, we designed a simple but effective nanoparticle system for carrying IR780 and paclitaxel, thus hoping to combine PTT/PDT and chemotherapy to treat hepatocellular carcinoma (HCC). This nanosystem, named PDF nanoparticles, consisted of phospholipid/Pluronic F68 complex nanocores and pullulan shells. IR780 and paclitaxel were loaded separately into PDF nanoparticles to form PDFI and PDFP nanoparticles, which had regular sphere shapes and relatively small sizes. Upon near-infrared laser irradiation at 808 nm, PDFI nanoparticles showed strong PTT/PDT efficacy both in vitro and in vivo. In MHCC-97H cells, the combined treatment of PDFI nanoparticles/laser irradiation and PDFP nanoparticles exhibited significant synergistic effects on inhibiting cell proliferation and inducing cell apoptosis and cell cycle arrest at G2/M phase. In MHCC-97H tumor-bearing mice, PDFI nanoparticles exhibited excellent HCC-targeting and accumulating capability after intravenous injection. Furthermore, the combined treatment of PDFI nanoparticles/laser irradiation and PDFP nanoparticles also effectively inhibited the tumor growth and the tumor angiogenesis in MHCC-97H tumor-bearing mice. In summary, we put forward a therapeutic strategy for HCC treatment by combining PTT/PDT and chemotherapy.

Characteristics of Artemether-Loaded Poly(lactic-co-glycolic) Acid Microparticles Fabricated by Coaxial Electrospray: Validation of Enhanced Encapsulation Efficiency and Bioavailability

Artemether is one of the most effective drugs for the treatment of chloroquine-resistant and Plasmodium falciparum strains of malaria. However, its therapeutic potency is hindered by its poor bioavailability. To overcome this limitation, we have encapsulated artemether in poly(lactic-co-glycolic) acid (PLGA) core-shell microparticles (MPs) using the coaxial electrospray method. With optimized process parameters including liquid flow rates and applied electric voltages, experiments are systematically carried out to generate a stable cone-jet mode to produce artemether-loaded PLGA-MPs with an average size of 2 μm, an encapsulation efficiency of 78 ± 5.6%, and a loading efficiency of 11.7%. The in vitro release study demonstrates the sustained release of artemether from the core-shell structure in comparison with that of plain artemether and that of MPs produced by single-axial electrospray without any relevant cytotoxicity. The in vivo studies are performed to evaluate the pharmacokinetic characteristics of the artemether-loaded PLGA-MPs. Our study implies that artemether can be effectively encapsulated in a protective shell of PLGA for controlled release kinetics and enhanced oral bioavailability.

Design of Drug Delivery Systems Containing Artemisinin and Its Derivatives

Artemisinin and its derivatives have been reported to be experimentally effective for the treatment of highly aggressive cancers without developing drug resistance, they are useful for the treatment of malaria, other protozoal infections and they exhibit antiviral activity. However, they are limited pharmacologically by their poor bioavailability, short half-life in vivo, poor water solubility and long term usage results in toxicity. They are also expensive for the treatment of malaria when compared to other antimalarials. In order to enhance their therapeutic efficacy, they are incorporated onto different drug delivery systems, thus yielding improved biological outcomes. This review article is focused on the currently synthesized derivatives of artemisinin and different delivery systems used for the incorporation of artemisinin and its derivatives.

Sustained-release liquisolid compact tablets containing artemether-lumefantrine as alternate-day regimen for malaria treatment to improve patient compliance

The present study aimed to develop low-dose liquisolid tablets of two antimalarial drugs artemether–lumefantrine (AL) from a nanostructured lipid carrier (NLC) of lumefantrine (LUM) and estimate the potential of AL as an oral delivery system in malariogenic Wistar mice. LUM-NLCs were prepared by hot homogenization using Precirol^® ATO 5/Transcutol^® HP and tallow fat/Transcutol^® HP optimized systems containing 3:1 ratios of the lipids, respectively, as the matrices. LUM-NLC characteristics, including morphology, particle size, zeta potential, encapsulation efficiency, yield, pH-dependent stability, and interaction studies, were investigated. Optimized LUM-NLCs were mixed with artemether powder and other dry ingredients and the resultant powder evaluated for micromeritics. Subsequent AL liquisolid tablets were tested for in vitro drug release and in vivo antiplasmodial activity in mice infected with Plasmodium berghei berghei (NK 65). Results showed that optimized LUM-NLC were stable, spherical, polydispersed but nanometric. Percentage yield and encapsulation efficiency were ~92% and 93% for Precirol^® ATO 5/Transcutol^® HP batch, then 81% and 95% for tallow fat/Transcutol^® HP batch while LUM was amorphous in NLC matrix. In vitro AL release from liquisolid compacts revealed initial burst release and subsequent sustained release. Liquisolid tablet compacts formulated with Precirol^® ATO 5/Transcutol^® HP-AL4 achieved higher LUM release in simulated intestinal fluid (84.32%) than tallow fat/Transcutol^® HP-BL3 (77.9%). Non-Fickian (anomalous) diffusion and super case II transport were the predominant mechanisms of drug release. Equal parasitemia reduction was observed for both batches of tablet compacts (~92%), superior to the reduction obtained with commercial antimalarial formulations: Coartem^® tablets (86%) and chloroquine phosphate tablets (66%). No significant difference (P<0.05) in parasite reduction between double (4/24 mg/kg) and single (2/12 mg/kg) strength doses of AL compacts was observed. Our result highlights that AL could be formulated in much lower doses (4/24 mg/kg), for once-in-two days oral administration to improve patient compliance, which is currently not obtainable with conventional AL dosage forms.

Bio-inspired artemether-loaded human serum albumin nanoparticles for effective control of malaria-infected erythrocytes

AIM

The intra-erythrocytic development of the malarial parasite is dependent on active uptake of nutrients, including human serum albumin (HSA), into parasitized red blood cells (pRBCs). We have designed HSA-based nanoparticles as a potential drug-delivery option for antimalarials.

METHODS

Artemether-loaded nanoparticles (AANs) were designed and antimalarial activity evaluated in vitro/in vivo using Plasmodium falciparum/Plasmodium berghei species, respectively.

RESULTS

Selective internalization of AAN into Plasmodium-infected RBCs in preference to healthy erythrocytes was observed using confocal imaging. In vitro studies showed 50% dose reduction for AAN as compared with drug-only controls to achieve IC₅₀ levels of inhibition. The nanoparticles exhibited twofold higher peak drug concentrations in RBCs with antimalarial activity at 50% of therapeutic doses in P. bergei infected mice.

CONCLUSION

Novel HSA-based nanoparticles offer safe and effective approach for selective targeting of antimalarial drugs.

Preclinical safety of solid lipid nanoparticles and nanostructured lipid carriers: Current evidence from in vitro and in vivo evaluation

Solid lipid nanoparticles (SLN) and nanostructured lipid carriers (NLC) were designed as exceptionally safe colloidal carriers for the delivery of poorly soluble drugs. SLN/NLC have the particularity of being composed of excipientsalready approved for use in medicines for human use, which offers a great advantage over any other nanoparticulate system developed from novel materials. Despite this fact, any use of excipients in new route of administration or in new dosage form requires evidence of safety. After 25 years of research on SLN and NLC, enough evidence on their preclinical safety has been published. In the present work, published data on in vitro and in vivo compatibility of SLN/NLC have been surveyed, in order to provide evidence of high biocompatibility distinguished by intended administration route. We also identified critical factors and possible weak points in SLN/NLC formulations, such as the effect of surfactants on the cell viability in vitro, which should be considered for further development.

Synthesis and Evaluation of Substituted Poly(organophosphazenes) as a Novel Nanocarrier System for Combined Antimalarial Therapy of Primaquine and Dihydroartemisinin

PURPOSE

The synthesis and evaluation of novel biodegradable poly(organophosphazenes) (3-6) namely poly[bis-(2-propoxy)]phosphazene (3) poly[bis(4-acetamidophenoxy)]phosphazene (4)poly[bis(4-formylphenoxy)]phosphazene (5) poly[bis(4-ethoxycarbonylanilino)]phosphazene (6) bearing various hydrophilic and hydrophobic side groups for their application as nonocarrier system for antimalarial drug delivery is described.

METHODS

The characterization of polymers was carried out by IR, (1)H-NMR and (31)P-NMR. The molecular weights of these novel polyphosphazenes were determined using size exclusion chromatography with a Waters 515 HPLC Pump and a Waters 2414 refractive index detector. The degradation behavior was studied by 200 mg pellets of polymers in phosphate buffers pH 5.5, 6.8 and 7.4 at 37°C. The degradation process was monitored by changes of mass as function of time and surface morphology of polymer pellets. The developed combined drugs nanoparticles formulations were evaluated for antimalarial potential in P. berghei infected mice.

RESULTS

These polymers exhibited hydrolytic degradability, which can afford applications to a variety of drug delivery systems. On the basis of these results, the synthesized polymers were employed as nanocarriers for targeted drug delivery of primaquine and dihydroartemisinin. The promising in vitro release of both the drugs from nanoparticles formulations provided an alternative therapeutic combination therapy regimen for the treatment of drug resistant malaria. The nanoparticles formulations tested in resistant strain of P. berghei infected mice showed 100% antimalarial activity.

CONCLUSIONS

The developed nanocarrier system provides an alternative combination regimen for the treatment of resistant malaria.

Post-insertion of poloxamer 188 strengthened liposomal membrane and reduced drug irritancy and in vivo precipitation, superior to PEGylation

The ultimate aim of this study was to develop asulacrine (ASL)-loaded long-circulating liposomes to prevent phlebitis during intravenous (i.v.) infusion for chemotherapy. Poly(ethylene)glycol (PEG) and poloxamer 188-modified liposomes (ASL-PEGL and ASL-P188L) were developed, and ASL was loaded using a remote loading method facilitated with a low concentration of sulfobutyl ether-β-cyclodextrin as a drug solubilizer. The liposomes were characterized in terms of morphology, size, release properties and stability. Pharmacokinetics and venous tissue tolerance of the formulations were simultaneously studied in rabbits following one-hour i.v. infusion via the ear vein. The irritancy was assessed using a rat paw-lift/lick model after subplantar injections. High drug loading 9.0% w/w was achieved with no drug leakage found from ASL-PEGL or ASL-P188L suspended in a 5% glucose solution at 30days. However, a rapid release (leakage) from ASL-PEGL was observed when PBS was used as release medium, partially related to the use of cyclodextrin in drug loading. Post-insertion of poloxamer 188 to the liposomes appeared to be able to restore the drug retention possibly by increasing the packing density of phospholipids in the membrane. In rabbits (n=5), ASL-P188L had a prolonged half-life with no drug precipitation or inflammation in the rabbit ear vein in contrast to ASL solution. Following subplantar (footpad) injections in rats ASL solution induced paw-lick/lift responses in all rats whereas ASL-P188L caused no response (n=8). PEGylation showed less benefit possibly due to the drug 'leakage'. In conclusion, drug precipitation in the vein and the drug mild irritancy may both contribute to the occurrence of phlebitis caused by the ASL solution, and could both be prevented by encapsulation of the drug in liposomes. Poloxamer 188 appeared to be able to 'seal' the liposomal membrane and enhance drug retention. The study also highlighted the importance of bio-relevant in vitro release study in formulation screening.

Design, synthesis and evaluation of antimalarial potential of polyphosphazene linked combination therapy of primaquine and dihydroartemisinin

Various polymer drug conjugates (13-16) such as primaquine and dihydroartemisinin conjugated 2-propoxy substituted polyphosphazenes (13), primaquine and dihydroartemisinin conjugated 4-acetamidophenoxy substituted polyphosphazenes (14), primaquine and dihydroartemisinin conjugated 4-formyl substituted polyphosphazenes (15) and primaquine and dihydroartemisinin conjugated 4-aminoethylbenzoate substituted polyphosphazenes (16) were synthesized using substituted polyphosphazenes as polymer and primaquine and dihydroartemisinin as combination antimalarial pharmacophores and formulated to nanoparticles to achieve novel controlled combined drug delivery approach for radical cure of malaria. The polymeric backbone was suitably substituted to impart different physicochemical properties. The polymer-drug conjugates were characterized by IR, (1)H NMR, (31)P NMR and their molecular weights were determined by Gel Permeation Chromatography. The thermal properties of the conjugates (13-16) were studied by DSC and TGA. The conjugates (13-16) were then formulated to nanoparticles formulations to increase their uptake by hepatocytes and to achieve targeted drug delivery. The nanoparticle formulations were characterized by Zeta Sizer and their morphology were studied by TEM (Transmission Electron Microscopy) imaging. The nanoparticles formulations exhibited biphasic in vitro drug release profile, the initial burst release followed by a sustained release owing to the non-fickian diffusion during first step release and fickian diffusion during second step release. In vivo antimalarial efficacy was tested using Plasmodium berghei (NK65 resistant strain) infected swiss albino mice at different doses. The combination therapy exhibited promising antimalarial efficacy at lower doses in comparison to the standard drug combination. Further, this combination therapy provided protection over 35days without any recrudescence, thus proving to be effective against resistant malaria. The study provides an alternative combination regimen found to be effective in the treatment of resistant malaria.

A microfluidic method to synthesize transferrin-lipid nanoparticles loaded with siRNA LOR-1284 for therapy of acute myeloid leukemia

The siRNA LOR-1284 targets the R2 subunit of ribonucleotide reductase (RRM2) and has shown promise in cancer therapy. In this study, transferrin (Tf) conjugated lipid nanoparticles (Tf-NP-LOR-1284) were synthesized by microfluidic hydrodynamic focusing (MHF) and evaluated for the targeted delivery of LOR-1284 siRNA into acute myeloid leukemia (AML) cells. The in vitro study showed that Tf-NP-LOR-1284 can protect LOR-1284 from serum nuclease degradation. Selective uptake of Tf-NP-LOR-1284 was observed in MV4-11 cells. In addition, qRT-PCR and Western blot results revealed that Tf-NP-LOR-1284 was more effective than the free LOR-1284 in reducing the R2 mRNA and protein levels. The Tf-NP-LOR-1284 showed prolonged circulation time and increased AUC after i.v. administration relative to the free LOR-1284. Furthermore, Tf-NP-LOR-1284 facilitated increased accumulation at the tumor site along with the decreased R2 mRNA and protein expression in a murine xenograft model. These results suggest that Tf-conjugated NPs prepared by MHF provide a suitable platform for efficient and specific therapeutic delivery of LOR-1284 into AML cells.