Continuous, simultaneous cocrystallization and formulation of Theophylline and 4-Aminobenzoic acid pharmaceutical cocrystals using twin screw melt granulation

Hot-Melt Extrusion: from Theory to Application in Pharmaceutical Formulation-Where Are We Now?

Hot-melt extrusion (HME) is a globally recognized, robust, effective technology that enhances the bioavailability of poorly soluble active pharmaceutical ingredients and offers an efficient continuous manufacturing process. The twin-screw extruder (TSE) offers an extremely resourceful customizable mixer that is used for continuous compounding and granulation by using different combinations of conveying elements, kneading elements (forward and reverse configuration), and distributive mixing elements. TSE is thus efficiently utilized for dry, wet, or melt granulation not only to manufacture dosage forms such as tablets, capsules, or granule-filled sachets, but also for designing novel formulations such as dry powder inhalers, drying units for granules, nanoextrusion, 3D printing, complexation, and amorphous solid dispersions. Over the past decades, combined academic and pharmaceutical industry collaborations have driven novel innovations for HME technology, which has resulted in a substantial increase in published articles and patents. This article summarizes the challenges and models for executing HME scale-up. Additionally, it covers the benefits of continuous manufacturing, process analytical technology (PAT) considerations, and regulatory requirements. In summary, this well-designed review builds upon our earlier publication, probing deeper into the potential of twin-screw extruders (TSE) for various new applications.

Integrated continuous melt granulation-based powder-to-tablet line: process investigation and scale-up on the same equipment

In the last decades, continuous manufacturing (CM) has become a research priority in the pharmaceutical industry. However, significantly fewer scientific researches address the investigation of integrated, continuous systems, a field that needs further exploration to facilitate the implementation of CM lines. This research outlines the development and optimization of an integrated, polyethylene glycol aided melt granulation-based powder-to-tablet line that operates fully continuously. The flowability and tabletability of a caffeine-containing powder mixture were improved through twin-screw melt granulation resulting in the production of tablets with improved breaking force (from 15 N to over 80 N), excellent friability, and immediate release dissolution. The system was also conveniently scaleable: the production speed could be increased from 0.5 kg/h to 8 kg/h with only minimal changes in the process parameters and using the same equipment. Thereby the frequent challenges of scale-up can be avoided, such as the need for new equipment and separate optimization.

Updates on applications of low-viscosity grade Hydroxypropyl methylcellulose in coprocessing for improvement of physical properties of pharmaceutical powders

Hydroxypropyl methylcellulose (HPMC) is an important polymeric excipient. Its versatility in terms of molecular weights and viscosity grades is the basis for its wide and successful application in the pharmaceutical industry. Low viscosity grades of HPMC (like E3 and E5) have been used as physical modifiers for pharmaceutical powders in recent years due to their unique physicochemical and biological properties (e.g., low surface tension, high T_g, strong hydrogen bonding ability, etc.). Such modification is the co-processing of HPMC with a drug/excipient to create composite particles (CPs) for the purpose of providing synergistic effects of functional improvement as well as of masking undesirable properties of the powder (e.g., flowability, compressibility, compactibility, solubility, stability, etc.). Therefore, given its irreplaceability and tremendous opportunities for future developments, this review summarized and updated studies on improving the functional properties of drugs and/or excipients by forming CPs with low-viscosity HPMC, analyzed and exploited the improvement mechanisms (e.g., improved surface properties, increased polarity, hydrogen bonding, etc.) for the further development of novel co-processed pharmaceutical powders containing HPMC. It also provides an outlook on the future applications of HPMC, aiming to provide a reference on the crucial role of HPMC in various areas for interested readers.

Creation of Hydrochlorothiazide Pharmaceutical Cocrystals Via Hot-Melt Extrusion for Enhanced Solubility and Permeability

Crystal engineering is an emerging tool for altering the physicochemical properties of drug candidates. The objective of the current investigation was to develop cocrystals of hydrochlorothiazide (HCT) with coformers such as nicotinamide (NIC), resorcinol (RSL), and catechol (CAT) using hot-melt extrusion (HME) technology. The liquid-assisted grinding (LAG) method was used to prepare cocrystals by grinding the drug and coformer in a definite molar ratio as a reference and to check the feasibility of cocrystal formation. Cocrystals were prepared using HME and evaluated with differential scanning calorimetry, Fourier transform infrared spectroscopy, X-ray diffractometry, and scanning electron microscopy and compared with LAG cocrystals. Barrel temperature was the critical process parameter for producing high-quality cocrystals in HME. All cocrystals exhibited improved solubility compared to the native drug, and HCT-NIC cocrystals showed a two-fold increase in solubility. Similarly, HCT-RSL and HCT-CAT showed higher solubility profiles and improved diffusion/permeability characteristics compared to that of the pure HCT due to the drug-coformer interactions in the cocrystals. In this study, the solubility of the coformer was the key factor determining cocrystal solubilization. However, hot-melt extrusion is an alternative technology for creating pharmaceutical cocrystals and has potential for industrial scale-up.

Twin-Screw Melt Granulation for Oral Solid Pharmaceutical Products

This article highlights the advantages of pharmaceutical continuous melt granulation by twin-screw extrusion. The different melt granulation process options and excipients are described and compared, and a case is made for expanded use of twin-screw melt granulation since it is a flexible and continuous process. Methods for binder selection are profiled with a focus on rheology and physical stability impacts. For twin-screw melt granulation, the mechanism of granulation and process impact on granule properties are described. Pharmaceutical applications of melt granulation ranging from immediate release of soluble and insoluble APIs, taste-masking, and sustained release formulation are reviewed, demonstrating the range of possibilities afforded by twin-screw melt granulation.

A Review of Pharmaceutical Nano-Cocrystals: A Novel Strategy to Improve the Chemical and Physical Properties for Poorly Soluble Drugs

Nowadays, many commercial drugs have poor solubility and bioavailability. Cocrystals are formulated to modulate active pharmaceutical ingredients’ properties with improved solubility, dissolution, and bioavailability compared to their pristine individual components in the pharmaceutical industry. Nano-cocrystals, crystals in the nano range, can further enhance these properties because of not only the cocrystal structure, but also the large surface to volume ratio of nanocrystals. Even though there are many studies on cocrystals, the research of pharmaceutical nano-cocrystals is still in the initial stage. Thus, it is necessary to conduct a systematic study on pharmaceutical nano-cocrystals. In this review, the possible preparation approaches of nano-cocrystals have been reported. To have a comprehensive understanding of nano-cocrystals, some analytical techniques and characterizations will be discussed in detail. In addition, the feasible therapeutic application of nano-cocrystals will be presented. This work is expected to provide guidance to develop new nano-cocrystals with commercial value in the pharmaceutical industry.

In-line Raman spectroscopy and chemometrics for monitoring cocrystallisation using hot melt extrusion

The application of in-line Raman spectroscopy to monitor the formation of a 1:1 cocrystal of ibuprofen (IBU) as a BCS class II drug and nicotinamide as coformer using hot-melt extrusion (HME) was investigated. The process was monitored over different experimental conditions inserting the Raman probe before the extruder die. Partial least square (PLS) was applied as a robust chemometric technique to build predictive models at different levels of chemometric by dividing the experimental data set into calibration and validation subsets. Powder X-Ray diffraction (PXRD) spectra of a set of standard samples were used as calibration to calculate the cocrystal yield from HME experiments regressed by the PLS models. Examination of the full spectra with standard normal variate (SNV) scatter correction with first derivative provided the best fitting goodness and reliability for prediction. Differential scanning calorimetry (DSC) was used as a complementary technique to confirm the composition of the extrudates. Tracking the cocrystal formation throughout the barrel by inserting two Raman probes simultaneously in two different heating zones revealed highly valuable information for understanding the mechanism of cocrystal formation during the HME process.

Understanding solid-state processing of pharmaceutical cocrystals via milling: Role of tablet excipients

Discovery of novel cocrystal systems and improvement of their physicochemical properties dominates the current literature on cocrystals yet the required end-product formulation is rarely addressed. Drug product manufacturing includes complex API solid state processing steps such as milling, granulation, and tableting. These all require high mechanical stress which can lead to solid-state phase transformations into polymorphs and solvates, or lead to dissociation of cocrystals into their individual components. Here we measured the effect of tablet excipients on solid-state processing of a range of pharmaceutical cocrystal formulations. Our findings were rationalised using Density Functional Theory (DFT) calculations of intermolecular binding energies of cocrystal constituents and co-milling excipients. A 1:1 stoichiometric ratio of API Theophylline (THP) and co-former 4-Aminobenzoic acid (4ABA) was co-milled with five different excipients: hydroxypropylmethylcellulose (HPMC), polyvinylpyrrolidone (PVP), polyethylene glycol (PEG), lactose, and microcrystalline cellulose (MCC). The experiments were carried out in 10 and 25 ml milling jars at 30 Hz for different milling times. Co-milled samples were characterised for formation of cocrystals and phase transformation using powder X-ray diffraction (PXRD) and differential scanning calorimetry (DSC). Our data shows that co-milling in the presence of PEG, HMPC or lactose yields purer cocrystals, supported by the calculated stronger excipient interactions for PVP and MCC. We identify a suitably-prepared THP-4ABA pharmaceutical cocrystal formulation that is stable under extended milling conditions.

Solution Cocrystallization: A Scalable Approach for Cocrystal Production

With an increasing interest in cocrystals due to various advantages, demand for large-scale cocrystallization techniques is rising. Solution cocrystallization is a solvent-based approach that utilizes several single-component crystallization concepts as well as equipment for generating cocrystals. Solution-based techniques can produce cocrystals with reasonable control on purity, size distribution, morphology, and polymorphic form. Many of them also offer a scalable solution for the industrial production of cocrystals. However, the complexity of the thermodynamic landscape and the kinetics of cocrystallization offers fresh challenges which are not encountered in single component crystallization. This review focuses on the recent developments in different solution cocrystallization techniques for the production of pharmaceutically relevant cocrystals. The review consists of two sections. The first section describes the various solution cocrystallization methods, highlighting their benefits and limitations. The second section emphasizes the challenges in developing these techniques to an industrial scale and identifies the major thrust areas where further research is required.

Pharmaceutical Co-Crystals, Salts, and Co-Amorphous Systems: A Novel Opportunity of Hot Melt Extrusion

Enhancing the solubility of active drug ingredients is a major challenge faced by scientists and researchers. Different approaches have been explored for the enhancement of solubility and physicochemical properties of drugs, without affecting their stability or pharmacological activity. Among the various strategies available, pharmaceutical co-crystals, co-amorphous systems, and pharmaceutical salts as multicomponent systems (MCS) have gained interest to improve physicochemical properties of drugs. Development of MCS by conventional methods involves the utilization of excess amount of solvents, thus, making the product prone to instability, and may also cause harmful side effects in patients. Scale up is critical and involves the investment of huge capital and time. Lately, hot-melt extrusion has been utilized in the development of MCS to enhance solubility, bioavailability, stability, and physicochemical properties of the drugs. In this review, the authors discussed the development of different MCS produced via hot-melt extrusion technology. Specifically, approaches for screening of co-formers and co-crystals, selection of excipients for co-amorphous systems, pharmaceutical salts, and significance of MCS and process parameters affecting product quality are discussed.

Innovations in Thermal Processing: Hot-Melt Extrusion and KinetiSol® Dispersing

Thermal processing has gained much interest in the pharmaceutical industry, particularly for the enhancement of solubility, bioavailability, and dissolution of active pharmaceutical ingredients (APIs) with poor aqueous solubility. Formulation scientists have developed various techniques which may include physical and chemical modifications to achieve solubility enhancement. One of the most commonly used methods for solubility enhancement is through the use of amorphous solid dispersions (ASDs). Examples of commercialized ASDs include Kaletra®, Kalydeco®, and Onmel®. Various technologies produce ASDs; some of the approaches, such as spray-drying, solvent evaporation, and lyophilization, involve the use of solvents, whereas thermal approaches often do not require solvents. Processes that do not require solvents are usually preferred, as some solvents may induce toxicity due to residual solvents and are often considered to be damaging to the environment. The purpose of this review is to provide an update on recent innovations reported for using hot-melt extrusion and KinetiSol® Dispersing technologies to formulate poorly water-soluble APIs in amorphous solid dispersions. We will address development challenges for poorly water-soluble APIs and how these two processes meet these challenges.

Polymer-Assisted Aripiprazole-Adipic Acid Cocrystals Produced by Hot Melt Extrusion Techniques

Pharmaceutical cocrystals are a promising strategy to increase the solubility and dissolution rate of poorly soluble drugs. However, their manufacturing process requires a large quantity of solvents. The present study aimed to produce cocrystals by a solvent-free hot melt extrusion (HME) method to improve their solubility and dissolution rate. Aripiprazole (ARP) and adipic acid (ADP) were used as a weakly basic drug and acidic coformer, respectively. The processability of a plain ARP-ADP physical mixture (PM) compared with a PM with 5% Soluplus® (SOL) was investigated. Incorporating 5% SOL into the ARP-ADP blend reduced the processing torque and improved processability. The effects of temperature and screw speed on the formation of cocrystals were studied, and cocrystals were characterized by differential scanning calorimetry (DSC), fourier transform infrared (FTIR) spectroscopy, nuclear magnetic resonance (NMR) spectroscopy, powder X-ray diffraction (PXRD), scanning electron microscopy, and hot-stage microscopy. FTIR spectra revealed noncovalent interaction between ARP and ADP, which was confirmed by NMR spectra. Similarly, PXRD data exhibited characteristic peaks confirming the formation of new crystalline material. Further, the results indicated that cocrystals demonstrated higher dissolution rates and improved compressibility, as well as enhanced flow characteristics compared with pure ARP, suggesting its suitability in the development of solid dosage forms.