Modified Release Kinetics in Dual Filament 3D Printed Individualized Oral Dosage Forms

Hot-Melt Extrusion: from Theory to Application in Pharmaceutical Formulation-Where Are We Now?

Hot-melt extrusion (HME) is a globally recognized, robust, effective technology that enhances the bioavailability of poorly soluble active pharmaceutical ingredients and offers an efficient continuous manufacturing process. The twin-screw extruder (TSE) offers an extremely resourceful customizable mixer that is used for continuous compounding and granulation by using different combinations of conveying elements, kneading elements (forward and reverse configuration), and distributive mixing elements. TSE is thus efficiently utilized for dry, wet, or melt granulation not only to manufacture dosage forms such as tablets, capsules, or granule-filled sachets, but also for designing novel formulations such as dry powder inhalers, drying units for granules, nanoextrusion, 3D printing, complexation, and amorphous solid dispersions. Over the past decades, combined academic and pharmaceutical industry collaborations have driven novel innovations for HME technology, which has resulted in a substantial increase in published articles and patents. This article summarizes the challenges and models for executing HME scale-up. Additionally, it covers the benefits of continuous manufacturing, process analytical technology (PAT) considerations, and regulatory requirements. In summary, this well-designed review builds upon our earlier publication, probing deeper into the potential of twin-screw extruders (TSE) for various new applications.

Rising role of 3D-printing in delivery of therapeutics for infectious disease

Modern drug delivery to tackle infectious disease has drawn close to personalizing medicine for specific patient populations. Challenges include antibiotic-resistant infections, healthcare associated infections, and customizing treatments for local patient populations. Recently, 3D-printing has become a facilitator for the development of personalized pharmaceutic drug delivery systems. With a variety of manufacturing techniques, 3D-printing offers advantages in drug delivery development for controlled, fine-tuned release and platforms for different routes of administration. This review summarizes 3D-printing techniques in pharmaceutics and drug delivery focusing on treating infectious diseases, and discusses the influence of 3D-printing design considerations on drug delivery platforms targeting these diseases. Additionally, applications of 3D-printing in infectious diseases are summarized, with the goal to provide insight into how future delivery innovations may benefit from 3D-printing to address the global challenges in infectious disease.

Unidirectional drug release from 3D printed personalized buccal patches using FDM technology

Oromucosal delivery of active ingredients of drugs provides a superior administration route for the treatment of oral diseases, due to avoidance of the first pass effect. In the present work, in view of the characteristics of large differences between oral ulcer symptoms and different lesion sizes, dexamethasone acetate unidirectional drug release buccal patches has been prepared based on Fused Deposition Modelling (FDM). Unidirectional drug release was achieved by covering the top and side with ethyl cellulose. Polyvinyl alcohol as a drug carrier, xylitol as a plasticizer. First, the protection effect of different thicknesses of the protective layer is investigated to determine the thickness of the protective layer. Co-extrusion printing method was adapted, utilizing blank filament to regulate preparations with different areas' drug loading. The results show that co-extrusion had no significant impact on the overall patches' drug release and adhesion properties. The physicochemical properties of the patches were also characterized. Evaluation of irritation is showed that these patches do not cause irritation to the oral mucosa of rats. Pharmacodynamic evaluation results showed that the preparation could promote the reduction of ulcer area. The results showed that FDM printing is a convenient and practical approach in manufacturing buccal patches.

PHARMACEUTICAL 3D-PRINTING OF NANOEMULSIFIED EUCALYPT EXTRACTS AND THEIR ANTIMICROBIAL ACTIVITY

Overcoming the health threatening consequences of staphylococcal infections and their negative socio-economic effects have become a priority in the medical, pharmaceutical, food and many other sectors globally. Staphylococcal infections are a big challenge for a global health care, since they are difficult to be diagnosed and treated. Therefore, the development of new medicinal products of plant-origin is timely and important, because bacteria have a limited ability to develop resistance to such products. In the present study, a modified eucalypt (Eucalyptus viminalis L.) extract was prepared and further enhanced by using different excipients (surface active agents) to obtain a water-miscible 3D-printable extract (nanoemulsified aqueous eucalypt extract). Phytochemical and antibacterial studies of the eucalypt leaves extracts were conducted as a preliminary investigation for 3D-printing experiments of the extracts. The nanoemulsified aqueous eucalypt extract was mixed with polyethylene oxide (PEO) to form a gel applicable for semi-solid extrusion (SSE) 3D printing. The key process parameters in a 3D-printing process were identified and verified. The printing quality of the 3D-lattice type eucalypt extract preparations was very good, demonstrating the feasibility of using an aqueous gel in SSE 3D printing also exhibiting compatibility of the carrier polymer (PEO) with the plant extract. The SSE 3D-printed eucalypt extract preparations presented a rapid dissolution in water within 10-15 minutes, suggesting the applicability of these preparations e.g., in oral immediate-release applications.

Advancing non-destructive analysis of 3D printed medicines

Pharmaceutical 3D printing (3DP) has attracted significant interest over the past decade for its ability to produce personalised medicines on demand. However, current quality control (QC) requirements for traditional large-scale pharmaceutical manufacturing are irreconcilable with the production offered by 3DP. The US Food and Drug Administration (FDA) and the UK Medicines and Healthcare Products Regulatory Agency (MHRA) have recently published documents supporting the implementation of 3DP for point-of-care (PoC) manufacturing along with regulatory hurdles. The importance of process analytical technology (PAT) and non-destructive analytical tools in translating pharmaceutical 3DP has experienced a surge in recognition. This review seeks to highlight the most recent research on non-destructive pharmaceutical 3DP analysis, while also proposing plausible QC systems that complement the pharmaceutical 3DP workflow. In closing, outstanding challenges in integrating these analytical tools into pharmaceutical 3DP workflows are discussed.

Texture analysis – a versatile tool for pharmaceutical evaluation of solid oral dosage forms

In the past few decades, texture analysis (TA) has gained importance as a valuable method for the characterization of solid oral dosage forms. As a result, an increasing number of scientific publications describe the textural methods that evaluate the extremely diverse category of solid pharmaceutical products. Within the current work, the use of texture analysis in the characterization of solid oral dosage forms is summarised with a focus on the evaluation of intermediate and finished oral pharmaceutical products. Several texture methods are reviewed regarding the applications in mechanical characterization, and mucoadhesion testing, but also in estimating the disintegration time and in vivo specific features of oral dosage forms. As there are no pharmacopoeial standards for pharmaceutical products tested through texture analysis, and there are important differences between reported results due to different experimental conditions, the choice of testing protocol and parameters is challenging. Thereby, this work aims to guide the research scientists and quality assurance professionals involved in different stages of drug development into the selection of optimal texture methodologies depending on the product characteristics and quality control needs.

Development of multifunctional drug delivery system via hot-melt extrusion paired with fused deposition modeling 3D printing techniques

The model of core-shell structured tablets is gaining increased interest due to its advantages in controlled-release and combinational drug delivery. Through the encapsulation of the drug by the outer shell, this model exhibits huge potential for reduced administration frequency, improved taste-masking, and personalized medication strategy. Although different types of core-shell tablets have been recently developed, most of them focused on the embedding of the solid tablets. Therefore there is still a need to investigate an optimized model in which multiple dosage forms can be loaded. This work uses hot-melt extrusion and fused deposition modeling 3D printing (FDM 3DP) techniques to develop a multifunctional core-shell model for controlled drug delivery. Acetaminophen (APAP) was used as the model drug. Hydroxypropyl cellulose (HPC) and hydroxypropyl methylcellulose (HPMC) was used as the matrix materials. Polyethylene oxide (PEO) and Eudragit RS PO (E RSPO) were used to adjust the printability while the E RSPO was expected to act as an extended-release agent due to its hydrophobicity. Liquid, semi-solid and solid dosage forms could be successfully loaded into the produced shells. The formulations were characterized by scanning electron microscopy, three point-bend tests, differential scanning calorimetry, and dissolution studies. The dissolution results suggested the modified-release character of the designed model. Overall, the designed core-shell model could be successfully produced via hot-melt extrusion paired with FDM 3DP techniques and could be utilized for the delivery of distinct dosage forms which improve the on-demand formulation development for patient-centered medication.