Immediate maxillary reconstruction after malignant tumor extirpation

Transoral versus transfacial surgical approach to maxillary tumors: evaluation of outcomes and perspectives

Neoplasms of the maxilla have multiple different origins and histology, and often extend towards the infratemporal fossa, orbit, or skull base. Extensive resection may be required, often leading to poor esthetic and functional results. Usually, these lesions are removed via a transfacial approach. The aim of this study was to compare the outcomes of the transoral versus transfacial approach for maxillary tumors. A single-institution retrospective study was conducted on patients with maxillary-midface tumors, treated between January 2009 and December 2019. The patients were divided into two groups according to the surgical approach, transfacial or transoral, and the following outcomes were assessed: extent of the resection based on Brown's classification; postoperative pathology margin assessment; reconstruction technique; esthetic/functional results. A total of 178 patients were included. A satisfactory resection was obtained in both groups, with the transoral cohort achieving a higher rate of clear oncological margins (positive margins: transoral group 3.7% versus transfacial group 6.8%, P = 0.389) and a significantly higher University of Washington Quality of Life score (mean 72.2 versus 67.8, P < 0.001). Even large and invasive tumors can be treated successfully with the transoral approach, avoiding unesthetic facial scars while still providing complete resection of the tumor.

Chronological flap volume and distribution changes after reconstruction of total maxillectomy defect using a rectus abdominis myocutaneous flap

BACKGROUND/PURPOSE

After total or subtotal maxillectomy, reconstruction using a free rectus abdominis myocutaneous (RAMC) flap is a fundamental and useful option. The purpose of the present study was to clarify the degree of flap volume change and volume distribution change with time after total or subtotal maxillectomy and free RAMC flap reconstruction and to examine the factors affecting the results.

METHODS

A total of 20 patients who underwent total or subtotal maxillectomy with free RAMC flap reconstruction were examined, and the flap volume change rate (volume at final evaluation [POD 181-360] / volume at initial evaluation [POD 5-30]) was investigated using the results of imaging tests. Moreover, the flap was divided into four blocks (A-D) in the cranio-caudal direction, and the volume change of each block was individually analyzed.

RESULTS

The overall volume change rate of fat/muscle/total was 0.84 ± 0.21/0.36 ± 0.08/0.67 ± 0.15, at the mean follow-up period of 309±35 days after the operation. The multiple regression analysis revealed that weight loss (for fat), postoperative RT (for fat and muscle), and young age (for muscle) were independently associated with flap volume loss. The results also indicated that the fat volume was stable, whereas the muscle volume decreased to <40% over time, assuming there were no influencing factors. Regarding flap volume distribution change, the fat volume tended to gather toward the central-cranial direction, while the muscle volume gathered toward the cranial direction, and total flap volume gathered toward the central direction.

The Anterolateral Thigh Flap for Reconstruction of the Defect After Maxillectomy

OBJECTIVE

This study aimed to investigate the efficacy and success rate of the anterolateral thigh flap (ALT) in reconstructing total maxillectomy defects.

METHODS

This retrospective study involved patients with total maxillectomy defects, who underwent free ALT reconstruction from June 2005 to October 2014.

RESULTS

The study included 72 patients (43 males and 29 females; age range, 7-77 years; mean age, 43 years). Four patients experienced major complications related to surgery: total flap loss in one patient, partial flap necrosis requiring reoperation in one patient, hematoma requiring operative evacuation in 1 patient, and diplopia requiring reoperation in 1 patient. Two patients experienced minor complications: partial flap loss healed by secondary intention with local wound care, and donor site suture rupture in 1 patient healed by secondary intention. Six patients died because of cancer-related death (after local recurrence or metastatic disease). The defects in 5 patients involved the facial skin for which the ALT was segmented into three parts to reconstruct the facial skin, nasal lining, and oral lining. The defects in 4 patients involved the orbital floor for which a segment of tensor fascia lata was included with the flap on the same pedicle and used to repair the orbital floor. In the remaining patients, the free ALT flap, including a segment of vastus lateralis, was used to repair the maxillary defect and fill the dead space. All but one of the surviving patients were satisfied with their final appearance postoperatively.

CONCLUSION

The free ALT flap with or without fascia lata to repair the orbital floor is safe, reliable, and acceptable for reconstructing total maxillectomy defects.

Large orbital defect reconstruction in the setting of globe-sparing maxillectomy: The titanium hammock and layered fibula technique

INTRODUCTION

The purpose of our study was to describe a novel technique for reconstruction of orbital defects after maxillectomy using a non-anatomic titanium mesh suspension of orbital contents for both support and volume correction. This construct is then articulated with a layered fibula osteocutaneous free flap that restores orbital rim, zygoma, and maxillary alveolus. We herein present our application of this technique, including refinements over time and long-term outcomes.

METHODS

A retrospective review was performed on 12 patients who underwent reconstruction of Brown class III orbitopalatomaxillary defects with extensive orbital involvement (at minimum complete orbital floor and rim absent) with titanium mesh sling and a layered fibula free flap.

RESULTS

Primary reconstruction was accomplished in all 12 patients. The mean postoperative length of stay was 8 days (6-14 days). There were no free flap failures or perioperative re-explorations. Patients were routinely extubated on postoperative day #1 and began oral intake by postoperative day #3. At a mean follow-up length of 48 months, unrestricted eye function was accomplished in all patients. Midfacial symmetry was accomplished in 10 of 12 patients; 2 patients had moderate asymmetry due to extirpation of facial musculature and/or soft tissue. Minor revisions were necessary for lower lid ectropion and exposure of the titanium plate. Two patients required adipofascial free flap coverage of exposed intraoral bone after radiation therapy.

CONCLUSIONS

This technique provides excellent restoration of eye position and function and also allows for implant-based prosthetic rehabilitation. It has become our procedure of choice for orbitomaxillary reconstruction.

Outcomes of Orbital Floor Reconstruction After Extensive Maxillectomy Using the Computer-Assisted Fabricated Individual Titanium Mesh Technique

PURPOSE

Orbital floor defects after extensive maxillectomy can cause severe esthetic and functional deformities. Orbital floor reconstruction using the computer-assisted fabricated individual titanium mesh technique is a promising method. This study evaluated the application and clinical outcomes of this technique.

PATIENTS AND METHODS

This retrospective study included 10 patients with orbital floor defects after maxillectomy performed from 2012 through 2014. A 3-dimensional individual stereo model based on mirror images of the unaffected orbit was obtained to fabricate an anatomically adapted titanium mesh using computer-assisted design and manufacturing. The titanium mesh was inserted into the defect using computer navigation. The postoperative globe projection and orbital volume were measured and the incidence of postoperative complications was evaluated.

RESULTS

The average postoperative globe projection was 15.91 ± 1.80 mm on the affected side and 16.24 ± 2.24 mm on the unaffected side (P = .505), and the average postoperative orbital volume was 26.01 ± 1.28 and 25.57 ± 1.89 mL, respectively (P = .312). The mean mesh depth was 25.11 ± 2.13 mm. The mean follow-up period was 23.4 ± 7.7 months (12 to 34 months). Of the 10 patients, 9 did not develop diplopia or a decrease in visual acuity and ocular motility. Titanium mesh exposure was not observed in any patient. All patients were satisfied with their postoperative facial symmetry.

CONCLUSION

Orbital floor reconstruction after extensive maxillectomy with an individual titanium mesh fabricated using computer-assisted techniques can preserve globe projection and orbital volume, resulting in successful clinical outcomes.

Polypropylene Darning: A New Alternative for Reconstruction of Orbital Floor after Total Maxillectomy

Removal of orbital floor is an integral part of total (radical) maxillectomy (type IIIa), which if not managed properly, may lead to some eye related distressing complications like diplopia, eyelid malposition, epiphora, dacryocystitis, enopthalmos and ectoprion. Among all, diplopia is the most distressing complication which hampers daily activity. Various options for orbital floor reconstruction are available like titanium sheet, polypropylene mesh, non-vascularized or vascularized bone graft, pedicled flaps, micro-vascular free flaps, prosthesis placement, and split skin graft followed by obturator placement. Till date no-body has tried stabilization of eye ball by 'darning' the orbital floor using non-absorbable suture. 'Polypropylene suture darning' is an easy to learn, novel method with equally good results. Five patients with potentially resectable tumors underwent total maxillectomy. I used polypropylene 3-0 round body suture and 'darning' was done at orbital floor, incorporating periosteum (if remaining) and peri-orbital fat into the sutures. Muscle flaps were done to provide bulk and palatal reconstruction. Assessment of patients was done post-operatively at day-5 i.e., before discharge and at 1 month after surgery, and also in further follow up visits. The results were very good in terms of clear vision & eye movements (directly related to 'darning'), and the aesthetic look of patients and bilateral symmetry were satisfactory (not related to darning). Darning of orbital floor by polypropylene after total maxillectomy is an easy to learn and cost-effective method of reconstruction with good results.

Maxillary reconstruction: Current concepts and controversies

Maxillary reconstruction is still an evolving art when compared to the reconstruction of the mandible. The defects of maxilla apart from affecting the functions of the speech, swallowing and mastication also cause cosmetic disfigurement. Rehabilitation of the form and function in patients with maxillary defects is either by using an obturator prosthesis or by a surgical reconstruction. Literature is abundant with a variety of reconstructive methods. The classification systems are also varied, with no universal acceptance of any one of them. The oncologic safety of these procedures is still debated, and conclusive evidence in this regard has not emerged yet. Management of the orbit is also not yet addressed properly. Tissue engineering, that has been hyped to be one of the possible solutions for this vexing reconstructive problem, has not come out with reliable and reproducible results so far. This review article discusses the rationale and oncological safety of the reconstructing the maxillary defects, critically analyzes the classification systems, offers the different reconstructive methods and touches upon the controversies in this subject. The management of the retained and exenterated orbit associated with maxillectomy is reviewed. The surgical morbidity, complications and the recent advances in this field are also looked into. An algorithm, based on our experience, is presented.

Current reconstructive techniques following head and neck cancer resection using microvascular surgery

Various techniques have been developed to reconstruct head and neck defects following surgery to restore function and cosmetics. Free tissue transfer using microvascular anastomosis has transformed surgical outcomes and the quality of life for head and neck cancer patients because this technique has made it possible for surgeons to perform more aggressive ablative surgery, but there is room for improvement to achieve a satisfactory survival rate. Reconstruction using the free tissue transfer technique is closely related to cardiovascular surgery because the anastomosis techniques used by head and neck surgeons are based on those of cardiovascular surgeons; thus, suggestions from cardiovascular surgeons might lead to further development of this field. The aim of this article is to present the recent general concepts of reconstruction procedures and our experiences of reconstructive surgeries of the oral cavity, mandible, maxilla, oropharynx and hypopharynx to help cardiovascular surgeons understand the reconstructions and share knowledge among themselves and with neck surgeons to develop future directions in head and neck reconstruction.

Reconstruction of high maxillectomy defects with the fibula osteomyocutaneous flap in combination with titanium mesh or a zygomatic implant

BACKGROUND

This retrospective review examined the authors' patients who underwent reconstruction of high maxillectomy defects with fibula osteomyocutaneous flaps in combination with titanium mesh or a zygomatic implant. Outcome assessments included aesthetic, speech, and masticatory function.

METHODS

Twenty patients who underwent reconstruction of high maxillectomy defects with fibula osteomyocutaneous flaps in combination with titanium mesh (n = 19) or a zygomatic implant (n = 1) were reviewed. The fibula was fashioned to recreate the alveolar ridge and pterygomaxillary buttress, and the skin paddle was applied to restore the palate and nasal airway. The anterior wall of the maxilla and the orbital floor were reconstructed with titanium mesh in 19 patients. In four patients with extensive soft-tissue defects, a radial forearm flap was combined to restore missing soft tissue. Aesthetics, speech, and masticatory function were evaluated postoperatively.

RESULTS

Nine patients underwent immediate maxillary reconstruction and 11 patients underwent secondary reconstruction. The overall success rate of 24 flaps was 95.8 percent. The exposure rate for titanium mesh and the oronasal fistula rate were both 10.5 percent. The average length of follow-up was 34.7 months. Recurrence occurred in only one patient, who died as a result of the disease. Ten patients received implant-borne prostheses or removable partial dentures. Excellent or good cosmesis and intelligible speech were noted in 19 patients. All patients were ultimately able to tolerate a regular or soft diet.

CONCLUSIONS

Reconstruction of high maxillectomy defects with the fibula osteomyocutaneous flap in combination with titanium mesh or a zygomatic implant is a feasible and acceptable option with a high success rate, a low complication rate, excellent postoperative cosmesis, and well-accepted function.