Comparative Stability of Sodium Tetradecyl Sulphate (STD) and Polidocanol Foam: Impact on Vein Damage in an In-vitro Model

Long-term outcomes of mechanochemical ablation using the Clarivein device for the treatment of great saphenous vein incompetence

OBJECTIVE

The short-term anatomical success rates of mechanochemical ablation using the Clarivein device (Merit Medical) in the treatment of great saphenous vein (GSV) incompetence are high. However, the anatomical success rates seem to drop over time. The aim of this study was to determine the long-term outcomes of GSV treatment using the Clarivein and to assess whether specific anatomical features better correlate with clinical or quality of life (QoL)-related outcomes.

METHODS

This is a single-center, prospective cohort study in follow-up of a multicenter, randomized controlled trial using Clarivein with liquid polidocanol for the treatment of GSV incompetence. The primary outcome was anatomical success (AS), defined as complete occlusion or a recanalized segment, irrespective of reflux, of <10 cm in length. In addition, reflux-free anatomical success (RF-AS) was determined, and defined as complete occlusion or a recanalized segment with <10 cm of reflux. Clinical success was assessed using the Venous Clinical Severity Score (VCSS), and QoL was assessed using the Dutch version of the Aberdeen Varicose Vein Questionnaire (DAVVQ) and the 36-Item Short Form Health Survey (SF-36). Subgroup analyses were performed based on whether AS or RF-AS was achieved or not.

RESULTS

A total of 109 patients (115 limbs) were included. The mean follow-up time was 8.4 ± 0.9 years (range, 5.5-10.3 years). AS was seen in 60.5% of limbs, and RF-AS was seen in 72.8% of limbs. Compared with baseline, the overall mean VCSS improved from 5.3 ± 2.4 to 4.1 ± 2.4, and the overall median DAVVQ score from 13.5 (interquartile range [IQR], 8.7-20.0) to 10.5 (IQR, 5.3-16.2) (P < .001). Improvement in VCSS was only significant in patients with successful treatment: from 5.5 ± 2.7 to 3.7 ± 2.5 (P < .001) if AS was achieved and from 5.0 ± 1.7 to 4.5 ± 1.9 (P = .20) if AS was not achieved. The same results were found for DAVVQ scores: improvement from13.5 (IQR, 8.7-20.6) to 10.3 (IQR, 3.0-14.5) (P < .01) if AS was achieved and from 12.9 (IQR, 8.3-19.3) to 10.8 (IQR, 6.7-18.2) (P = .35) if AS was not achieved. Regarding the overall SF-36 scores, the domains of vitality, mental health, and general health worsened significantly.

CONCLUSIONS

In over 8 years of follow-up, the anatomical success rate after the treatment of GSV incompetence using the Clarivein device decreased to 60.5%. However, clinical scores and disease-specific QoL still improved significantly compared with baseline. We found no convincing evidence that the absence of reflux correlates better with clinical and QoL-related outcomes compared with recanalization irrespective of reflux.

The Effect of Pushing Rate on Foam Stability in the Tessari Method

BACKGROUND

The Tessari method is commonly used in sclerotherapy for producing foam, involving 2 syringes pushed back and forth 20 times with the use of a 3-way connector. Many factors affect the foam stability which is crucial for clinical efficacy.

OBJECTIVE

This study aimed to identify the optimal pushing rate which may impact the foam stability.

MATERIALS AND METHODS

Polidocanol (POL) solution (1% and 3%) was used to make sclerosant foam via the Tessari method, with a total of 20 pushes performed at different time durations: 10, 15, 20, 25, 30, 35, and 40 seconds. The foam stability was recorded using foam half-life time (FHT), and the pushing pressure to the syringe was recorded using a self-made electric device. Both FHT and the pressure among different groups were compared respectively.

RESULTS

The FHT was decreased as pushing duration exceeding 20 seconds in POL 1% and 15 seconds in POL 3%. Both the highest FHT and pressure point were located in the 10-second group.

CONCLUSION

It is recommended to complete 20 back-and-forth passages within 10 seconds to create stable foam.

Effect of catheter needle caliber on polidocanol foam stability in foam sclerotherapy

Background

Although sclerotherapy is widely used to treat vascular malformations (VMs), it is associated with several challenges. One significant issue is the insufficient understanding of the influence of various factors on the stability of polidocanol (POL) foam used in sclerotherapy.

Objective

This study aimed to explore the effect of the catheter needle caliber on foam stability when using POL with or without hyaluronic acid (HA) for the treatment of VMs.

Methods and materials

The Tessari method generated sclerosant foam using POL both with and without HA. We used catheters and syringe needles of various calibers, and the resulting foam was transferred into new syringes to facilitate a comparison of foam stability. Foam half-life (FHT) was utilized as a metric to assess foam stability.

Results

The study found that narrower needle calibers produced a more stable foam when POL was used alone; however, no significant effect was observed when HA was added. Furthermore, when the foam was expelled using catheters and syringe needles of the same size, no noticeable changes in the stability were observed.

Conclusion

When choosing needles of varying calibers, their effect on foam stability should be carefully considered, particularly when the foam contains HA.

Empty vein ablation (EVA) technique: an in-vivo animal model to assess the effects of sclerosing agent concentration and wall contact time on intima and media tunicae structure

BACKGROUND

Sclerotherapy is a cornerstone of the treatment of chronic venous disease, despite some technical aspects (e.g., sclerosant liquid agent concentration [SLAC] and contact time between sclerosant agent and vein wall [ctSA/VW]) to maximize outcomes remain an unsolved problem and a source of debate. An innovative three-balloon catheter has been developed to allow sclerotherapy in empty vein conditions (Empty Vein Ablation technique, EVA), revolutionizing the definition of SLAC and ctSA/VW. Aim of this experimental study is to analyze EVA effects on intima and media vessel tunicae using different SLAC and ctSA/VW in an in-vivo animal model.

METHODS

Two adult sheep were treated by EVA using jugular and common iliac vein axes (eight vein segments). Different SLAC (polidocanol 0.5% or 1%) and different ctSA/VW (3 or 5 minutes) were combined for testing residual circumferential intima percentage and media thickness after EVA.

RESULTS

Intact circumferential residual intima after the treatment was 21.3±4.9%, 18.2±7.4%, 15.7±2.4% and 8.9±2.0% using 0.5% (3 min), 0.5% (5 min), 1% (3 min) and 1% (5 min), respectively (R2=0.945; control sample: 97.6%). Media thickness after the treatment was 121.6±35.3 µm, 110.9±7.8 µm, 96.1±30.4 µm and 79.1±34.1 µm using 0.5% (3 min), 0.5% (5 min), 1% (3 min) and 1% (5 min), respectively (R2=0.990; control sample 125.7 µm). No significant modifications were detected analyzing the adventitia in all samples.

CONCLUSIONS

EVA proved to be effective in venous wall destruction even with a very low SLAC and ctSA/VW (0.5% in 3 minutes), in quite large caliber veins. Direct comparisons with foam/liquid sclerotherapy should be done to confirm therapeutic effectiveness of these results, despite EVA has provided a maximized and controlled SA/VW contact time and ratio.

Efficacy and safety of mechanochemical ablation versus laser ablation in the treatment of primary great saphenous vein reflux: A randomized, open, parallel controlled clinical trial

OBJECTIVE

To evaluate the efficacy of a new mechanochemical ablation (MOCA) device versus endovenous laser ablation (EVLA) for primary great saphenous vein (GSV) reflux.

MATERIALS AND METHODS

Prospectively analyze the demographics, treatment detail and outcomes data of 57 primary GSV reflux patients. Patients were randomly assigned to MOCA or EVLA group with random envelope method. Primary endpoint was 6-month closure rate of GSV. Secondary endpoint including technical success rate, the venous clinical severity score (VCSS), chronic venous insufficiency questionnaire (CIVIQ-20) score and visual analogue scale (VAS) for pain.

RESULTS

The procedures were well tolerated according to the VAS score. The 6-month closure rate was 85.71% in MOCA and 96.55% in EVLA group (p = .194). Significant changes were observed in regard of VCSS and CIVIQ-20 score at 6-month follow-up. Skin paresthesia occurred in 0 in MOCA and 5 in EVLA group.

CONCLUSION

The new MOCA device is safe and effective in treating primary great saphenous vein reflux. The 6-month closure rate is non-inferior compared with EVLA. However, the long-term results need further follow-up.

The Stability of Physician-Compounded Foam is Influenced by the Angle of Connector

BACKGROUND

Foam sclerotherapy is an effective treatment for varicose veins and venous malformations, with its efficacy influenced by foam stability. The methods for preparing physician-compounded foam (PCF) are the double syringe system (DSS) and Tessari method. Few studies have been performed to compare the PCF stability produced by the 2 methods and their mechanisms. We aim to compare the stability of PCF produced by 2 two methods in the same connector and explore the reasons for the difference.

METHODS

Foam was generated by the 2 methods under different circumstances. In the Tessari method, 2 syringes were connected at right angles (90°) by a 3-way tap. In the DSS method, 2 syringes were connected by the same 3-way tap in a straight line (180°). The stability and uniformity of foam produced by the 2 methods were compared using foam half-time and optical microscopy, respectively. Assuming that the difference in foam stability between the 2 methods was related to the angles of a connector, we compared the foam stability when 2 syringes were connected with a plastic connector bent to different angles.

RESULTS

The DSS method could produce more uniform foam with longer foam half-time than the Tessari method, which was related to the angle of the connector.

CONCLUSIONS

The stability of PCF is influenced by the angle of the connector.

Contemporary management of extracranial vascular malformations

Vascular malformations are congenital vascular anomalies that originate because of disorganized angiogenesis, most commonly from spontaneous somatic genetic mutations. The modern management of vascular malformations requires a multidisciplinary team that offers patients the gamut of medical, surgical, and percutaneous treatment options with supportive care. This manuscript discusses the standard and contemporary management strategies surrounding extracranial vascular malformations and overgrowth syndromes.

Interventional Treatment Options in Children with Extracranial Vascular Malformations

Extracranial vascular malformations vary greatly and belong to the complex field of orphan diseases and can involve all segments of the vascular tree: arteries, capillaries, and veins, and similarly the lymphatic system. The classification according to the International Society for the Study of Vascular Anomalies (ISSVA) represents an important guidance for selecting appropriate therapy. Although many of the principles of endovascular treatment, including image-guided sclerotherapy and embolization, are similar in adult and pediatric practice, there are some distinct differences regarding the treatment of vascular malformations of children. Thus, it is crucial to involve longer-term plan about managing these chronic diseases and their impact on a growing child. This review provides a detailed overview over the clinical presentation of venous, lymphatic, and arteriovenous malformations in children and emphasizes the specifics of their interventional treatment options, including distinct pediatric dose limitations and procedure-related side effects.

Comparison of foaming properties between Shirasu porous glass membrane device and Tessari's three-way stopcock techniques for polidocanol and ethanolamine oleate foam production: A Benchtop Study

PURPOSE

To compare the characteristics of polidocanol (POL) and ethanolamine oleate (EO) sclerosing foams produced by a Shirasu porous glass membrane (SPGM) device with those made using a three-way stopcock (3WSC).

MATERIALS AND METHODS

Foam half-life times were measured in an ex vivo benchtop study. Computed tomography (CT) images of each foam were obtained over the time course, and CT texture analysis was conducted. Bubble size in each foam was measured by an optical microscope.

RESULTS

Median foam half-life times were longer in the SPGM group than in the 3WSC group (POL: 198 vs 166 s, p = 0.02; EO: 640 vs 391 s, p < 0.01). In CT texture analysis, median standard deviation (SD) and entropy (randomness) were lower, and median energy (uniformity) and gray-level co-occurrence matrix (GLCM) homogeneity (homogeneity) were higher in the SPGM group than in the 3WSC group (POL SD: at 30 s and 50-300 s; POL entropy: at 0-60 s; EO SD: at 0-600 s; EO entropy: at 0-460 s; POL energy: at 0-40 s; POL GLCM homogeneity: at 0-250 s; EO energy: at 0-360 s; EO GLCM homogeneity: at 0-480 s; all p < 0.05). Median bubble diameters in the SPGM group and in the 3WSC group were 69 and 83 μm (p < 0.01), respectively, in POL foam; and 36 and 36 μm (p = 0.45), respectively, in EO foam.

CONCLUSION

POL and EO foams had greater uniformity and longer foam half-life time when prepared with an SPGM device than with a 3WSC.

How Diluted Liquid Sodium Tetradecyl Sulphate Works in Varices with Competent Superficial Valves Versus Stockings Alone

BACKGROUND AND OBJECTIVE

Varicose veins are the most common complaints of referrals to vascular surgeons. Upon the cause, liquid sclerotherapy could be an efficient solution first in regard to competent main superficial valves. To find the impact of diluted liquid sclerotherapy in varices in patients with no superficial valve refluxes compare to whom wearing only stockings.

MATERIALS AND METHODS

Sclerotherapy with 0.3-0.5% liquid form of Sodium Tetradecyl Sulphate (STS) for reticular and spider varicosis, ulcers feeder veins and grade 3-4 sporadic varices were used. Patient's complaints the zone prevalence, response and satisfactoriness were detected clinically and data compared between the two injected cases and who managed by stockings alone with >1 year follow up.

RESULTS

Two groups (156 sclerotherapy, 76 only stockings) with three classifications for severity were obtained. Complete recovery of all varices and ulcers were almost achieved with no considerable complication. Logical regression test in unilateral to bilateral varices predict about 70% more recovery (p = 0.048), mild to severe 85% more (p<0.001), moderate to severe 29% more (p = 0.008) and 10-15% response for severe cases. No significant difference for ages and responses between the 2 groups was existed.

CONCLUSION

Diluted liquid sclerotherapy by STS was shown efficient in all ranges of varices. Stockings alone also were adequate to relief symptoms compare to sclerotherapy.

Vascular anomalies of the head and neck: diagnosis and treatment

Vascular malformations and vascular tumors comprise the two specific subsets of vascular anomalies that arise as a result of disorganized angiogenesis and neoplasm, respectively. Malformations are separate entities from vascular tumors (e.g., hemangiomas) and are recognized by the International Society for the Study of Vascular Anomalies (ISSVA) as such. Vascular malformations are classified into four main groups: simple, combined, anomalies of major vessels, and those associated with other vascular anomalies. Vascular tumors are neoplastic growths of blood vessels and are morphologically and molecularly distinct from malformations but can arise in the head and neck and have syndromic association. Head and neck vascular anomalies are not uncommon in the pediatric population and require special care in the workup, diagnostic imaging and clinical care. The purpose of this manuscript is to discuss the diagnosis and management of the most common intracranial and extracranial vascular malformations and tumors in the head and neck in children and adolescents.

Evaluation of the efficacy of foam sclerosant after addition of glycerine on human great saphenous vein: histological and immunohistochemical study

INTRODUCTION

Several treatment modalities have been postulated to improve the efficacy of varicose vein treatment. Addition of glycerine to the sclerosing material has been documented to increase its viscosity and subsequently prolong the duration of stability, in addition to the direct sclerosing effect of glycerine. This histological and immunohistochemical study investigated the efficacy of addition of glycerine 72% to sclerotherapy on the human varicose vein.

METHODS

After surgical stripping of great saphenous veins, three equal segments were resected between two clamps. Specimen 1 was injected with saline only, specimen 2 was exposed to foam sclerosant 2%, and specimen 3 was exposed to a mixture of foam sclerosant 2% and glycerine 72%. All segments were left for 5min. Vein segments were then processed for histological and immunohistochemical study.

RESULTS

Microscopically, haematoxylin and eosin-stained specimen 1 showed endothelial swelling, cytoplasmic eosinophilia and pyknotic nuclei. The media showed sarcoplasm vacuolisation and necrosis. Specimen 3 showed hypereosinophilic sarcoplasm of the smooth muscle fibres. Oedema was less evident, with a relative decrease in the thickness of the wall compared with specimen 2. Immunohistochemically, the expression of smooth muscle actin was weak in specimen 3 compared with specimens 1 and 2. Expression of CD31 antibody was much reduced in specimen 2 which showed conserved islands of endothelial cells. By contrast, there was a complete loss of endothelial cells in specimen 3.

CONCLUSION

Addition of glycerine 72% to foam sclerosant has a more damaging effect on human vein wall.

An Optical Method for Immediate Evaluation of Microfoam Stability in Foam Sclerotherapy

OBJECTIVES

The objective of our study was to develop an optical method that instantly evaluates the stability of sclerosing foam, which would enable early predictions of the clinical performance of the foam and reduce the occurrence of clinical side effects.

METHODS

Based on the principle of light scattering, we developed a method to optically test foam stability and verified it experimentally using sodium morrhuate (2 mL; 0.05 g/mL) and carbon dioxide. A self-made foam preparation instrument was used to achieve a preparation speed of 275 mm/s. The liquid-gas ratios were considered as 1:3, 1:4, and 1:5. Curves of illuminance with respect to the drainage rate and decay time were obtained. By fitting the curve, the relationship between foam half-life time (FHT) and foam decay was obtained. Thus, foam stability was evaluated using the initial illuminance value; the foam transfer time was approximately 3 s.

RESULTS

The experimental FHT varies between 205 and 232 s. Illuminance is exponentially related to drainage rate and linearly related with time. FHT can be expressed by the initial illuminance and illuminance curve fitting coefficients. The half-life of the foam decreases as the initial illuminance value increases, for the same sclerosing drug. The suitability of foam stability is determined by the position of the initial value in the chart.

CONCLUSION

Optical methods are feasible for evaluating foam stability over a short period of time. Clinically predicting the stability of freshly prepared foam can reduce number of incidences of further complications. This will promote the development of foam sclerotherapy and provide a basic understanding of the internal mechanical properties of foam.

Development of Glycerol-Rose Bengal-Polidocanol (GRP) foam for enhanced sclerosis of a cyst for cystic diseases

Polycystic kidney disease (PKD) is a common genetic disorder that results in a proliferating and enlarging cyst and ultimately leads to loss of kidney function. Because an enlarged cyst is a primary factor for limited kidney function, the large cyst is surgically removed by laparoscopic deroofing or sclerosant. This a relatively nascent treatment method entails complications and sometimes fail due to the cyst fluid refilling and infection. This study proposes using a more stable and effective polidocanol foam with glycerol and Rose Bengal (GRP form) to prevent cyst regeneration and irritation, which is caused by the required body movement during the treatment. Specifically, the foam retention time and viscosity were increased by adding glycerol up to 10% (w/v). The GRP form inhibited cellular proliferation and disrupted cellular junctions, e-cadherin, and cyst formation, demonstrated by the LDH, Live and Dead, and re-plating culture assays. The GRP foam was shown to be a safe and effective treatment as a commercial grade polidocanol foam form by an in vivo study in which subcutaneously injected mice injected with commercial 3% polidocanol, and the GRP foam showed no difference in inflammation. Thus, this study provides an advanced polidocanol form by adding glycerol and Rose-Bengal to help existing sclerotherapy.

The effect of the calibre and length of needle on the stability of sclerosing foam

OBJECTIVES

Little is known how calibre and length of needles affect the stability of sclerosing foam.

METHODS

Foams were made of 0.5%, 1%, 2% and 3% polidocanol, and 0.2%, 0.5%, 1% and 3% sodium tetradecyl sulfate (STS), which were mixed with air in the proportion of 4:1. These foams were ejected through needles with the length of: 4 mm, 6 mm and 13 mm, and diameter of: 0.26 mm, 0.3 mm and 0.4 mm.

RESULTS

Foams made of more concentrated polidocanol were more stable. Regarding STS an opposite relationship was revealed. Foams made of polidocanol were more stable if ejected through a longer needle, while the length of needle did not significantly affect stability of STS foams. Foams ejected through 0.26 mm diameter needles were very unstable. In the case of 0.5% polidocanol, 0.3x6mm needle provided atypically stable foam.

CONCLUSION

In order to inject maximally stable foam, calibre and length of needle should be taken into account.

Vascular anomalies: special considerations in children

The diagnosis and treatment of vascular anomalies are a large part of the caseload for paediatric interventional radiologists. Although many of the principles of sclerotherapy and embolisation are the same in adult and paediatric practice, there are some key differences in the approach for children, including some longer term thinking about managing these chronic diseases and their impact on a growing child. Vascular tumours are not often seen in adult IR practice and the rarest can be life threatening; knowledge of the commonest types and the role IR can play in their management can be instrumental in ensuring that children get appropriate treatment in a timely manner. Vascular anomalies also encompass some conditions associated with complex overgrowth, a subject that often causes confusion and uncertainty for interventional radiologists. This paper presents a simplified and practical approach to this spectrum of disease.

Serie interventional ultrasound: Ultrasound-guided interventional radiology procedures on veins

Although ultrasound-guided interventional procedures have resulted in great advances in many fields of medicine, this approach has revolutionized endovascular procedures. This paper aims to review the basic principles to develop a strategy to follow in ultrasound-guided treatments of varices in the lower limbs, as well as to provide a brief overview of the main endovenous techniques available nowadays. We divide these techniques into those that use catheters to occlude straight saphenous axes (thermal / non-thermal ablation) and other options, such as foam sclerotherapy, which can be used in all types of varices, even in those originating in the pelvis.

Congenital Limb Overgrowth Syndromes Associated with Vascular Anomalies

Congenital limb length discrepancy disorders are frequently associated with a variety of vascular anomalies and have unique genetic and phenotypic features. Many of these syndromes have been linked to sporadic somatic mosaicism involving mutations of the phosphoinositide 3-kinase (PI3K)/protein kinase B (AKT)/mammalian target of rapamycin (mTOR) pathway, which has an important role in tissue growth and angiogenesis. Radiologists who are aware of congenital limb length discrepancies can make specific diagnoses based on imaging findings. Although genetic confirmation is necessary for a definitive diagnosis, the radiologist serves as a central figure in the identification and treatment of these disorders. The clinical presentations, diagnostic and imaging workups, and treatment options available for patients with Klippel-Trenaunay syndrome, CLOVES (congenital lipomatous overgrowth, vascular anomalies, epidermal nevi, and scoliosis/spinal deformities) syndrome, fibroadipose vascular anomaly, phosphatase and tensin homolog mutation spectrum, Parkes-Weber syndrome, and Proteus syndrome are reviewed. ^©RSNA, 2019.

Two-year results of a multicenter randomized controlled trial comparing Mechanochemical endovenous Ablation to RADiOfrequeNcy Ablation in the treatment of primary great saphenous vein incompetence (MARADONA trial)

OBJECTIVE

Endothermal techniques have proved to be effective for treatment of incompetent truncal veins. The tumescentless mechanochemical ablation (MOCA) technique has become an alternative treatment modality, but its outcome with regard to endothermal techniques is still unclear.

METHODS

A multicenter prospective randomized controlled trial was designed comparing MOCA with radiofrequency ablation (RFA) to treat great saphenous vein incompetence with the hypothesis that MOCA is associated with less postprocedural pain and a comparable anatomic and clinical success rate at 1-year follow-up. Disease-specific quality of life and general health-related quality of life (HRQoL) were measured using questionnaires. Inclusion was terminated prematurely because reimbursement was suspended.

RESULTS

A total of 213 patients (46.3% of intended number of patients) were randomized, of whom 209 were treated (105 in the MOCA group and 104 in the RFA group). Overall median pain scores during the first 14 days were lower after MOCA (0.2 vs 0.5 after RFA; P = .010), although the absolute difference was small. At 30 days, similar complication numbers (MOCA, n = 62; RFA, n = 63) and HRQoL scores (Aberdeen Varicose Vein Questionnaire: MOCA, 8.9; RFA, 7.6; P = .233) were observed. Hyperpigmentation was reported in seven patients in the MOCA group and two patients in the RFA group (P = .038). In the MOCA group, there were four complete failures (3.8%) compared with none in the RFA group (P = .045), although in one patient at 1 year, the vein showed occlusion. Median 30-day Venous Clinical Severity Score (VCSS) was significantly lower at 30 days after MOCA (1.0 vs 2.0 in the RFA group; P = .001), whereas VCSS was comparable at baseline (MOCA, 4.0; RFA, 5.0; P = .155). The 1- and 2-year anatomic success rate was lower after MOCA (83.5% and 80.0%) compared with RFA (94.2% and 88.3%; P = .025 and .066), mainly driven by partial recanalizations. After 2 years of follow-up, no differences were observed in the number of complete failures. Similar clinical success rates at 1 year (MOCA, 88.7%; RFA, 93.2%; P = .315) and 2 years (MOCA, 93.0%; RFA, 90.4%; P = .699) and no differences in HRQoL scores on the Aberdeen Varicose Vein Questionnaire at 1 year (MOCA, 7.5; RFA, 7.0; P = .753) and 2 years (MOCA, 5.0%; RFA, 4.8%; P = .573) were observed. There were two cardiac serious adverse events, a ventricular fibrillation in the MOCA group (1 year) and an unstable angina in the RFA group (2 years). One deep venous thrombosis occurred in the RFA group on 1-year duplex ultrasound, without clinical sequelae.

CONCLUSIONS

Unilateral treatment with MOCA in the short term resulted in less postoperative pain but more hyperpigmentation compared with RFA and a faster improvement in VCSS. More anatomic failures were reported after MOCA, mostly driven by partial recanalizations, but both techniques were associated with similar clinical outcomes at 1 year and 2 years.

Recent developments on foaming mechanical and electronic techniques for the management of varicose veins

Introduction: Varicose veins are a common disease, causing significant impairment of quality of life to afflicted individuals. Conventional surgery has represented the traditional treatment for years, with significant post-operative complications. By the end of the 20^th century, novel approaches had been developed to induce biochemical sclerosis into the treated vein in order to exclude it from blood circulation.Areas covered: Foaming techniques for treatment of varicose veins, both clinically-approved methods and those under experimental studies. A brief description of cavitation, which is the basis of microbubbles formation, and an overview of foam properties have been also provided, including a discussion on clinical efficacy and safety profile.Expert commentary: Foam sclerotherapy has rapidly gained popularity since it represents the most minimally invasive and cost-effective procedure in the short term. Several different methods of foam preparation have been described in literature. In general, the foam generation method may affect characteristics such as stability and bubble size distribution, which in turn affect the therapeutic action of foam itself. Therefore, the selection of a suitable foaming technique is of importance for treatment success. Future developments on foaming techniques are expected to make sclerotherapy, already an effective treatment, even safer and more versatile therapeutic procedure.

Five-year outcomes of mechano-chemical ablation of primary great saphenous vein incompetence

Objective

The aim of the study is to report long-term results after mechano-chemical ablation for the treatment of great saphenous vein incompetence.

Methods

Mechano-chemical ablation was performed using the ClariVein device with polidocanol as the sclerosant. Clinical-Etiologic-Anatomic-Pathophysiologic (CEAP) classification, Venous-Clinical-Severity-Score (VCSS), anatomical-success, RAND-SF36 and the Aberdeen-Varicose-Vein-Questionnaire (AVVQ) were obtained by clinical examination, questionnaires and duplex ultrasonography through five years’ follow-up (Clinicaltrials.gov, NCT01459263).

Results

Ninety-four patients (113 great saphenous veins) were included in the study. Five-year follow-up data were available for 75 limbs (66.4%). Freedom from anatomical failure was 78.7% (N = 45) with 64.6% (N = 42) having an improvement in the VCSS ≥1. A total of five reinterventions were performed through five years with a median time to reintervention of 38 months. The VCSS at five years was 2 (IQR 1; 4) and was still significantly improved compared to baseline (p < 0.001). A deterioration of the VCSS was observed in 21.5%.

Conclusion

Through five-year follow-up, there are a significant number of anatomical and clinical failures in this series, mainly driven by partial recanalizations.

In vitro and ex vivo evaluation of the biological performance of sclerosing foams

Since the first reports on foam sclerotherapy, multiple studies have been conducted to determine the physical properties and behavior of foams, but relatively little is known about their biological effects on the endothelial cells lining the vessel wall. Moreover, a systematic comparison of the biological performance of foams produced with different methods has not been carried out yet. Herein, a 2D in vitro method was developed to compare efficacy of commercially available polidocanol injectable foam (PEM, Varithena) and physician-compounded foams (PCFs). Endothelial cell attachment upon treatment with foam was quantified as an indicator of therapeutic efficacy, and was correlated with foam physical characteristics and administration conditions. An ex vivo method was also developed to establish the disruption and permeabilisation of the endothelium caused by sclerosing agents. It relied on the quantitation of extravasated bovine serum albumin conjugated to Evans Blue, as an indicator of endothelial permeability. In our series of comparisons, PEM presented a greater overall efficacy compared to PCFs, across the different biological models, which was attributed to its drainage dynamics and gas formulation. This is consistent with earlier studies that indicated superior physical cohesiveness of PEM compared to PCFs.

Catheter-directed foam sclerotherapy with tumescence of the great saphenous vein versus ultrasound-guided foam sclerotherapy: A randomized controlled trial

Objectives

To compare the effectiveness of two foam sclerotherapy techniques of the great saphenous vein.

Methods

Fifty subjects with varicose veins, edema, and great saphenous vein incompetence (diameter 6–10 mm) were randomly categorized into two equal groups and were treated with different foam sclerotherapy techniques: A (usual ultrasound-guided) and B (catheter-directed with tumescence). Concomitant phlebectomy was performed in all patients. Patients were seen on days 7 and 28, and at six and 12 months. The primary outcomes were the full success rate of the treated great saphenous vein and the number of patients who required retreatment sessions performed at 28-day follow-up. The secondary-assisted outcomes were the full success rates of the treated great saphenous vein after the retreatment sessions at six- and 12-month follow-up. Secondary outcomes were changes in quality of life and side effects and complications of the intervention. In case of reflux, retreatment sessions were performed at 28 days and six months in both groups.

Results

Full success rate of the treated great saphenous vein was 36% in group A vs. 80% in group B ( p = 0.012) and the number of patients who required retreatment sessions were n = 14 in group A vs. n = 3 in group B at 28-day follow-up ( p = 0.002). Both were statistically significant. At six and 12 months, the success rates were not statistically significant between the groups. Complication rates were similar between the groups. Quality of life improved in both groups with statistical difference ( p < 0.001).

Conclusions

Catheter-directed foam sclerotherapy with tumescence was better than usual ultrasound-guided foam sclerotherapy as it reached higher full success rate of the treated great saphenous vein and as a lower number of patients required retreatment sessions in the short-term. Both methods proved to be safe and improved the quality of life.

Physical Vein Models to Quantify the Flow Performance of Sclerosing Foams

Foam sclerotherapy is clinically employed to treat varicose veins. It involves intravenous injection of foamed surfactant agents causing endothelial wall damage and vessel shrinkage, leading to subsequent neovascularization. Foam production methods used clinically include manual techniques, such as the Double Syringe System (DSS) and Tessari (TSS) methods. Pre-clinical in-vitro studies are conducted to characterize the performance of sclerosing agents; however, the experimental models used often do not replicate physiologically relevant physical and biological conditions. In this study, physical vein models (PVMs) were developed and employed for the first time to characterize the flow behavior of sclerosing foams. PVMs were fabricated in polydimethylsiloxane (PDMS) by replica molding, and were designed to mimic qualitative geometrical characteristics of veins. Foam behavior was investigated as a function of different physical variables, namely (i) geometry of the vein model (i.e., physiological vs. varicose vein), (ii) foam production technique, and (iii) flow rate of a blood surrogate. The experimental set-up consisted of a PVM positioned on an inclined platform, a syringe pump to control the flow rate of a blood substitute, and a pressure transducer. The static pressure of the blood surrogate at the PVM inlet was measured upon foam administration. The recorded pressure-time curves were analyzed to quantify metrics of foam behavior, with a particular focus on foam expansion and degradation dynamics. Results showed that DSS and TSS foams had similar expansion rate in the physiological PVM, whilst DSS foam had lower expansion rate in the varicose PVM compared to TSS foam. The degradation rate of DSS foam was lower than TSS foam, in both model architectures. Moreover, the background flow rate had a significant effect on foam behavior, enhancing foam displacement rate in both types of PVM.

Safety and Efficacy of a Novel Shunt Surgery Combined with Foam Sclerotherapy of Varices for Prehepatic Portal Hypertension: A Pilot Study

OBJECTIVES

This pilot study investigated the safety and efficacy of a novel shunt surgery combined with foam sclerotherapy of varices in patients with prehepatic portal hypertension.

METHODS

Twenty-seven patients who were diagnosed with prehepatic portal hypertension and underwent shunt surgeries were divided into three groups by surgery type: shunt surgery alone (Group A), shunt surgery and devascularization (Group B), and shunt surgery combined with foam sclerotherapy (Group C). Between-group differences in operation time, intraoperative blood loss, portal pressure decrease, postoperative complications, rebleeding rates, encephalopathy, mortality rates and remission of gastroesophageal varices were compared.

RESULTS

Groups A, B and C had similar operation times, intraoperative bleeding, and portal pressure decrease. The remission rates of varices differed significantly (p<0.001): one patient in Group A and 6 patients in Group B had partial response, and all 9 patients in Group C had remission (2 complete, 7 partial). Two Group A patients and one Group B patient developed recurrent gastrointestinal bleeding postoperatively within 12 months. No postoperative recurrence or bleeding was observed in Group C, and no sclerotherapy-related complications were observed.

CONCLUSIONS

Shunt surgery combined with foam sclerotherapy obliterates varices more effectively than shunt surgery alone does, decreasing the risk of postoperative rebleeding from residual gastroesophageal varices. This novel surgery is safe and effective with good short-term outcomes.

Studies on Foam Decay Trend and Influence of Temperature Jump on Foam Stability in Sclerotherapy

Objectives:

This study investigated the influence of temperature jump and liquid–gas ratio on foam stability to derive the foam-decay law.

Methods:

The experimental group conditions were as follows: mutation temperatures (10°C, 16°C, 20°C, 23°C, 25°C, and 27°C to >37°C) and liquid–gas ratios (1:1, 1:2, 1:3, and 1:4). The control group conditions were as follows: temperatures (10°C, 16°C, 20°C, 23°C, 25°C and 27°C) and liquid–gas ratios (1:1, 1:2, 1:3, and 1:4). A homemade device manufactured using the Tessari DSS method was used to prepare the foam. The decay process was videotape recorded. In the drainage rate curve, the temperature rose, and the liquid–gas ratio varied from 1:1 to 1:4, causing faster decay.

Results:

In the entire process, the foam volume decreased with increasing drainage rate. The relationships were almost linear. Comparison of the experimental and control groups shows that the temperature jump results in a drainage time range of 1 to 15 seconds. The half-life ranges from 10 to 30 seconds. The maximum rate is 18.85%. Changes in the preparation temperature yields a drainage time range of 3 to 30 seconds. The half-life varies from 20 to 60 seconds.

Conclusion:

Decreasing the temperature jump range and liquid–gas ratio gradually enhances the foam stability. The foam decay time and drainage rate exhibit an exponential function distribution.

Mechanochemical endovenous ablation of saphenous veins using the ClariVein: A systematic review

Objective To systematically review all available English literature on mechanochemical endovenous ablation and to report on the anatomical, technical, and clinical success. Methods A systematic literature search was performed in PubMed, EMBASE, and the Cochrane Library on mechanochemical endovenous ablation for the treatment of insufficient great and/or small saphenous vein. Methodological quality of the included studies was evaluated using the MINORS score. The primary outcome measure was anatomical success, defined as closure of the treated vein on follow-up duplex ultrasound imaging. Secondary outcomes were technical and clinical success, and major complications defined as deep venous thrombosis, pulmonary embolisms or paresthesia. Results The literature search identified 759 records, of which 13 were included, describing 10 unique cohorts. A total of 1521 veins (1267 great saphenous vein and 254 small saphenous vein) were included, with cohort sizes ranging from 30 to 570 veins. The pooled anatomical success rate after short-term follow up was 92% (95% CI 90-94%) ( n = 1314 veins). After 6 and 12 months these numbers were 92% (95% CI 88-95%) ( n = 284) and 91% (95% CI 86-94%) ( n = 228), respectively. The long-term anatomical success rates at 2 and 3 years were 91% (95% CI 85-95%) ( n = 136) and 87% (95% CI 75-94%) ( n = 48), respectively. Major complications and especially nerve injury were very rare (≤ 0.2%). All studies were of moderate or good quality using the MINORS scoring scale. Conclusions Mechanochemical endovenous ablation using the ClariVein in combination with liquid sclerosant is associated with an anatomical success rate ranging from 87% to 92% and good clinical success. To date, no randomized controlled trials are available studying the anatomical success after mechanochemical ablation, compared to the endothermal ablation. The risk of major complications is very low after the procedure.

Balloon-Occluded Retrograde Transvenous Obliteration for the Treatment of Gastric Varices: Polidocanol Foam Versus Liquid Ethanolamine Oleate

OBJECTIVE

The purpose of this study was to evaluate the clinical results of the management of gastric varices by balloon-occluded retrograde transvenous obliteration with polidocanol foam versus ethanolamine oleate.

MATERIALS AND METHODS

Twenty patients treated with ethanolamine oleate and 21 patients treated with polidocanol foam were enrolled in this study. Early therapeutic effects were assessed mainly by dynamic contrast-enhanced CT. Subjective symptoms, objective findings associated with the procedures, and changes in laboratory data during the obliteration process were evaluated. Rebleeding from gastric varices was assessed after the procedures.

RESULTS

Complete obliteration was confirmed in all but one case of early recanalization after treatment with polidocanol foam. One patient died of acute respiratory distress syndrome after treatment with ethanolamine oleate. The total sclerosant volume was significantly lower for 3% polidocanol foam (13.5 ± 6.8 mL) than for 5% ethanolamine oleate (30.6 ± 15.6 mL) (p < 0.01). Polidocanol foam caused fewer severe reactions, including pain, during and after injection. High body temperature, hemoglobinuria, and reactive pleural effusion were not observed with polidocanol foam. The variance in laboratory data values associated with hemolysis was significantly greater with ethanolamine oleate. No postprocedural rebleeding from the gastric varices was observed during a median follow-up time of 39.5 months after procedures with ethanolamine oleate and 34 months after procedures with polidocanol foam.

CONCLUSION

Polidocanol foam can achieve obliteration of gastric varices comparable to that of ethanolamine oleate but with a significantly lower sclerosant dose and reduced risk of hemolysis-induced complications and harmful reactions, including pain and fever.

Treatment Modalities for Small Saphenous Vein Insufficiency: Systematic Review and Meta-analysis

PURPOSE

To investigate and compare the anatomical success rates and complications of the treatment modalities for small saphenous vein (SSV) incompetence.

METHODS

A systematic literature search was performed in PubMed, EMBASE, and the Cochrane Library on the following therapies for incompetence of SSVs: surgery, endovenous laser ablation (EVLA), radiofrequency ablation (RFA), ultrasound-guided foam sclerotherapy (UGFS), steam ablation, and mechanochemical endovenous ablation (MOCA). The search found 49 articles (5 randomized controlled trials, 44 cohort studies) reporting on the different treatment modalities: surgery (n=9), EVLA (n=28), RFA (n=9), UGFS (n=6), and MOCA (n=1). A random-effects model was used to estimate the primary outcome of anatomical success, which was defined as closure of the treated vein on follow-up duplex ultrasound imaging. The estimate is reported with the 95% confidence interval (CI). Secondary outcomes were technical success and major complications [paresthesia and deep vein thrombosis (DVT)], given as the weighted means.

RESULTS

The pooled anatomical success rate was 58.0% (95% CI 40.9% to 75.0%) for surgery in 798 SSVs, 98.5% (95% CI 97.7% to 99.2%) for EVLA in 2950 SSVs, 97.1% (95% CI 94.3% to 99.9%) for RFA in 386 SSVs, and 63.6% (95% CI 47.1% to 80.1%) for UGFS in 494 SSVs. One study reported results of MOCA, with an anatomical success rate of 94%. Neurologic complications were most frequently reported after surgery (mean 19.6%) and thermal ablation (EVLA: mean 4.8%; RFA: mean 9.7%). Deep venous thrombosis was a rare complication (0% to 1.2%).

CONCLUSION

Endovenous thermal ablation (EVLA/RFA) should be preferred to surgery and foam sclerotherapy in the treatment of SSV incompetence. Although data on nonthermal techniques in SSV are still sparse, the potential benefits, especially the reduced risk of nerve injury, might be of considerable clinical importance.

Mechanochemical endovenous ablation for the treatment of great saphenous vein insufficiency

OBJECTIVE

This study evaluated the feasibility, safety, and 1-year results of mechanochemical endovenous ablation (MOCA) of great saphenous vein (GSV) insufficiency.

METHODS

A consecutive 106 patients were treated for primary GSV insufficiency with MOCA by the ClariVein device and polidocanol. The primary outcome measures were technical success, clinical success, and anatomic success after 1 year of follow-up. Secondary outcome measures were postprocedural pain, complications, general- and disease-specific quality of life, and time to return to work. Patients were evaluated with clinical examination and duplex ultrasonography at 6 weeks, 6 months, and 1 year after treatment.

RESULTS

The technical success was 99%. The mean postprocedural pain during the first 14 days after treatment was 7.5 mm (interquartile range [IQR], 0.0-10.0 mm) per day on a 0- to 100-mm visual analog scale. The time to return to normal activities and work was 1.0 day (IQR, 0-1.0 day) and 1.0 day (IQR, 1.0-4.0 days), respectively. No major complications were recorded. At 1-year follow-up, the clinical success was 93%. The Venous Clinical Severity Score decreased significantly from 4.0 (IQR, 3.0-5.0) before treatment to 1.0 (IQR, 0-1.0) (P < .001) 1 year after MOCA. At 1 year, 88.2% of the treated GSVs remained occluded as measured by duplex ultrasonography. Twelve patients had a recanalization, of which eight were partial. Disease-specific quality of life and the RAND 36-Item Health Survey scores improved significantly at 1-year follow-up.

CONCLUSIONS

MOCA is a safe and effective technique in the treatment of GSV insufficiency with good clinical and anatomic success at 1-year follow-up. The technique is related to low postprocedural pain scores, low complication rate, improved quality of life, and rapid resumption of normal activities and work.

Inventory used for balloon-occluded retrograde (BRTO) and antegrade (BATO) transvenous obliteration: sclerosants and balloon occlusion devices

The inventory used for the balloon-occluded retrograde transvenous obliteration (BRTO) and balloon-occluded antegrade transvenous obliteration procedures includes coaxial introducer sheath, catheters, balloon occlusion catheters, possibly microcatheters, possibly coils and preeminent vascular occlusion devices, and sclerosant mixtures. The inventory can be collectively categorized into "hardware" (sheaths, catheters, balloon occlusion devices, and alloy embolic agents) and sclerosant mixtures (contrast and sclerosing agents). The hardware inventory used in Japan is different from that used in the United States. Moreover, the inventory used in Japan is commonly specifically (purpose-built) designed for the BRTO procedure. Conversely, the hardware inventory used in the United States is a "generic" (multipurpose), which operators use for multiple other anatomical and clinical settings. Using different inventories that are not purposefully designed together requires multiple trials and errors to reach size and length compatibility. From a sclerosant standpoint, there is an ongoing paradigm shift toward foam-state sclerosant mixture in Japan and the United States (as of 2006). This article discusses the inventory used for BRTO and balloon-occluded antegrade transvenous obliteration in Japan and the United States and focuses on the inventory (including compatibility of inventory) that has worked and has become popularly used in the United States. The article also discusses the sclerosant mixture components, types and states (foam, froth, or liquid).