Electrochemical reactivity of TiO2 nanoparticles adsorbed onto boron-doped diamond surfaces

TiO2/MWCNT/Nafion-Modified Glassy Carbon Electrode as a Sensitive Voltammetric Sensor for the Determination of Hydrogen Peroxide

In this work we describe a straightforward approach for creating a nanocomposite comprising multiwalled carbon nanotubes (MWCNTs) and titanium dioxide (TiO2) using the hydrothermal technique, which is then characterized by scanning electron microscope (SEM), energy-dispersive X-ray spectrometer (EDS), X-ray diffraction analysis (XRD), Fourier transform infrared spectroscopy (FTIR), and thermal gravimetric analysis (TGA) to assess its properties. Nafion is employed as a reticular agent for the nanocomposite on the glassy carbon electrode (GCE), creating the MWCNT/TiO2/Nafion/GCE system. The electrochemical behavior of the system was evaluated using cyclic voltammetry, revealing its remarkable electrocatalytic activity for detecting hydrogen peroxide in water. The developed sensor showcased a broad linear response range of 14.00 to 120.00 μM, with a low detection limit of 4.00 μM. This electrochemical sensor provides a simple and highly sensitive method for detecting hydrogen peroxide in aqueous solutions and shows promising potential for various real-world applications, particularly in H2O2 monitoring.

Au-TiO2 Synthesized by a Microwave- and Sonochemistry-Assisted Sol-Gel Method: Characterization and Application as Photocatalyst

Titanium dioxide (TiO2) is a widely used and well studied photocatalyst synthesized using different methodologies, including sol-gel, which allows one to modify the material in a one-pot step. By using a microwave- and sonochemistry-assisted sol-gel method, x wt.% Au-TiO2 photocatalysts were successfully synthesized. Physicochemical characterization of the photocatalysts shows an average crystallite size of 10.5 nm and an even morphological distribution of spherical particles with the sonochemistry synthesis method. For the microwave method an average value of crystallite size of 8.3 nm was found and it presents an increase with the amount of Au load. The cyclic voltammetric response and Mott-Schottky analysis are consistent with a semiconductor material containing metallic particles and for a heterophase junction of anatase and brookite with oxygen vacancies, respectively. The photocatalytic activity was assessed by paracetamol degradation in an aqueous solution as model. The sonochemistry-synthesized photocatalysts display the most promising results as they have a better paracetamol removal and the amount of gold in the catalyst (0.7 wt.%) was found to be optimal for this process.

The electrochemistry of nanostructured titanium dioxide electrodes

Several of the multiple applications of titanium dioxide nanomaterials are directly related to the introduction or generation of charge carriers in the oxide. Thus, electrochemistry plays a central role in the understanding of the factors that must be controlled for the optimization of the material for each application. Herein, the main conceptual tools needed to address the study of the electrochemical properties of TiO(2) nanostructured electrodes are reviewed, as well as the electrochemical methods to prepare and modify them. Particular attention is paid to the dark electrochemical response of these nanomaterials and its direct connection with the TiO(2) electronic structure, interfacial area and grain boundary density. The physical bases for the generation of currents under illumination are also presented. Emphasis is placed on the fact that the kinetics of charge-carrier transfer to solution determines the sign and value of the photocurrent. Furthermore, methods for extracting kinetic information from open-circuit potential and photocurrent measurements are briefly presented. Some aspects of the combination of electrochemical and spectroscopic measurements are also dealt with. Finally, some of the applications of TiO(2) nanostructured samples derived from their electrochemical properties are concisely reviewed. Particular attention is paid to photocatalytic processes and, to a lesser extent, to photosynthetic reactions as well as to applications related to energy from the aspects of both saving (electrochromic layers) and accumulation (batteries). The use of TiO(2) nanomaterials in solar cells is not covered, as a number of reviews have been published addressing this issue.

Titanium and zinc oxide nanoparticles are proton-coupled electron transfer agents

Oxidation/reduction reactions at metal oxide surfaces are important to emerging solar energy conversion processes, photocatalysis, and geochemical transformations. Here we show that the usual description of these reactions as electron transfers is incomplete. Reduced TiO(2) and ZnO nanoparticles in solution can transfer an electron and a proton to phenoxyl and nitroxyl radicals, indicating that e(-) and H(+) are coupled in this interfacial reaction. These proton-coupled electron transfer (PCET) reactions are rapid and quantitative. The identification of metal oxide surfaces as PCET reagents has implications for the understanding and development of chemical energy technologies, which will rely on e(-)/H(+) coupling.

Nano-TiO(2)-flavin adenine dinucleotide film redox processes in contact to humidified gas | salt electrolyte

Redox processes in nano-TiO(2)-flavin adenine dinucleotide (TiO(2)-FAD) layer-by-layer assembled films on ITO substrate electrodes are investigated and compared in contact to aqueous electrolyte media (for dilute and saturated electrolyte) and in contact to solid humidified salt electrolyte (for extreme salt levels and different types of salts). Under these unusual conditions an aqueous microphase present at the gas | salt | electrode interface allows voltammograms to be obtained and redox processes to be analysed. It is demonstrated that the 2-electron 2-proton reduction of FAD can be used as reporter redox system to determine local pH at the electrode | gas | salt interface as pH 15, 12, 7 for contacts to K(3)PO(4), K(2)HPO(4), and KH(2)PO(4), respectively. Exposure to gases such as carbon dioxide is shown to lead to unexpected changes in surface pH. In the future, bio-electrochemical microphase processes under halophilic conditions could be useful for air-quality and rapid gas sensing devices.

A facile route to n-type TiO(2)-nanotube/p-type boron-doped-diamond heterojunction for highly efficient photocatalysts

Anatase TiO(2) nanotube (TiNT) arrays have been fabricated on a p-type boron-doped diamond substrate by a liquid phase deposition method using a ZnO nanorod template. The n-type TiNT/p-type diamond heterojunction structures which are realized show significantly enhanced photocatalytic activities with good recyclable behavior, with respect to the cases of sole TiNTs.

The effects of conductivity and electrochemical doping on the reduction of methemoglobin immobilized in nanoparticulate TiO2 films

Methemoglobin (bovine) is immobilized from aqueous phosphate buffer (pH 5.5) solution into thin porous TiO(2) (anatase) films at ITO electrode surfaces. Films of TiO(2) are produced in a deposition process employing 40 nm diameter TiO(2) nanoparticles suspended in dry methanol followed by calcination. The pore size in these films is sufficient for methemoglobin (ca. 6 nm diameter) to diffuse into the porous structure (over several hours) and to remain immobilized in electrochemically active form. The electrochemical reduction of methemoglobin immobilized in TiO(2) and immersed in aqueous phosphate buffer at pH 5.5 is observed in two steps with (i) a small quasi-reversible voltammetric response at -0.16 V vs. SCE (Process 1) and (ii) an irreversible reduction peak at ca. -0.5 V vs. SCE (Process 2). The irreversible response is recovered only after slow chemical re-oxidation of hemoglobin to methemoglobin. At sufficiently negative applied potential "electrochemical doping" of the TiO(2) host is observed to lead to a considerably enhanced reduction Process 1. TiO(2) can be temporarily switched from a non-conducting (irreversible electron transfer) into a conducting (reversible electron transfer) state.

Experimental and Theoretical Investigations on the Adsorption of 2‘-deoxyguanosine Oxidation Products at Oxidized Boron-Doped Diamond Electrodes

Electrochemical oxidation of 2'-deoxyguanosine has been performed on boron-doped diamond (BDD) electrodes, resulting in a strong adsorption of the formed oxidized products onto the BDD surface. The adsorption behavior has been investigated by studying the electrochemical behavior of a redox probe ([IrCl6]3-) using cyclic voltammetry. The most probable situations are the formation of (A) an insulating adsorbed film resulting in a partially blocked electrode behavior, (B) a porous film, or (C) an overall conductive film. Different parameters such as the standard rate constant, the charge-transfer coefficient, the electrode/adsorbed products/solution interface resistance, and the formal potential of the redox couple were determined. Through comparison of theoretical current-potential curves obtained by analytical calculations with experimental cyclic voltammograms, we found that the oxidized products of 2'-deoxyguanosine form a continuous conductive film on BDD.

Redox processes in mesoporous oxide membranes: layered TiO2 phytate and TiO2 flavin adenine dinucleotide films

Thin films of TiO2 (anatase) nanoparticles are assembled at an electrode surface via a layer-by-layer deposition process employing phytic acid, pyromellitic acid, or flavin adenine dinucleotide (FAD) as molecular binders. With all three types of binders, layers of typically 30 nm thickness are formed each deposition cycle. FAD as an electrochemically active component immobilized at the surface of the TiO2 particles is reduced to FADH2 and reoxidized in a chemically reversible two electron-two proton redox process. Two distinct voltammetric signals are observed for the immobilized FAD redox system associated with (i) hopping of electrons at the TiO2 surface (reversible) and (ii) conduction of electrons through the TiO2 assembly (irreversible). The conduction of electrons through the TiO2 assembly is possible by diffusion over considerable distances as well as through a "spacer" layer of TiO2 phytate. An order of magnitude (upper limit) estimate for the diffusion coefficient of electrons through TiO2 phytate, D(electron) approximately 10(-6) m(2) s(-1), is obtained from voltammetric data. Finally, it is demonstrated that the calcination of TiO2 assemblies causes dramatic changes in the electron transfer kinetics for the immobilized FAD/FADH2 redox system.