Novel electrode structure for DMFC operated with liquid methanol

Electrocatalytic ethanol oxidation reaction: recent progress, challenges, and future prospects

Direct ethanol fuel cells (DEFCs) have been widely considered as a feasible power conversion technology for portable and mobile applications. The economic feasibility of DEFCs relies on two conditions: a notable reduction in the expensive nature of precious metal electrocatalysts and a simultaneous remarkable improvement in the anode's long-term performance. Despite the considerable progress achieved in recent decades in Pt nanoengineering to reduce its loading in catalyst ink with enhanced mass activity, attempts to tackle these problems have yet to be successful. During the ethanol oxidation reaction (EOR) at the anode surface, Pt electrocatalysts lose their electrocatalytic activity rapidly due to poisoning by surface-adsorbed reaction intermediates like CO. This phenomenon leads to a significant loss in electrocatalytic performance within a relatively short time. This review provides an overview of the mechanistic approaches during the EOR of noble metal-based anode materials. Additionally, we emphasized the significance of many essential factors that govern the EOR activity of the electrode surface. Furthermore, we provided a comprehensive examination of the challenges and potential advancements in electrocatalytic EOR.

Instrument for layer-by-layer deposition of catalyst layers directly on proton exchange membrane for direct methanol fuel cell

A catalyst layer (CL) layer-by-layer (LbL) deposition instrument, consisting of an electrohydrodynamic atomization (EHDA) device and a proton exchange membrane (PEM) fixing device, has been developed. It has been used to deposit anode CL on Nafion membrane under different working distances of 4, 5, and 6 mm. The incorporation of EHDA LbL deposition allowed the generation of the CLs with different structures, where the higher working distance produced more porous CL structure. A catalyst-coated membrane (CCM) was also produced using this EHDA LbL deposition and PEM fixing device. It was observed that the catalyst has been uniformly coated on the Nafion membrane and the CCM presents an uniform surface feature. The performance of a single direct methanol fuel cell (DMFC) assembled with the deposited CCM at different working temperatures was analysed. The cell performance increased when the temperature rose. This instrument has the potential of being developed into a powerful device for controlling the deposition of CL of desired structures directly on PEM for DMFCs.

PtRu/Ti anodes with varying Pt ? Ru ratio prepared by electrodeposition for the direct methanol fuel cell

PtRu/Ti anodes with varying Pt ratio Ru ratio were prepared by electrodeposition of a thin PtRu catalyst layer onto Ti mesh for a direct methanol fuel cell (DMFC). The morphology and structure of the catalyst layers were analyzed by SEM, EDX and XRD. The catalyst coating layer shows an alloy character. The relative activities of the PtRu/Ti electrodes were assessed and compared in half cell and single DMFC experiments. The results show that these electrodes are very active for the methanol oxidation and that the optimum Ru surface coverage was ca. 9 at.% for DMFC operating at 20 degrees C and 11 at.% at 60 degrees C. The PtRu/Ti anode shows a performance comparable to that of the conventional carbon-based anode in a DMFC operating with 0.25 M or 0.5 M methanol solution and atmosphere oxygen gas at 90 degrees C.