Electrochemical micro-extraction of lead (II) at a hydroxylapatite modified platinum electrode

Electrochemical platform based on nitrogen-doped graphene/chitosan nanocomposite for selective Pb2+ detection

A novel nanocomposite was developed and used for trace determination of Pb²⁺ cations from aqueous solutions. The nanocomposite was obtained by the association of N-doped graphene (N-Gr) with a biocompatible polymer, namely chitosan (Ch). The characterization of the new nanocomposite material (Ch-N-Gr) was performed using TEM, STEM-EDX, SEM, XRD and XPS techniques. Compared with the bare gold electrode (GE) a remarkable enhancement of the voltammetric response of the modified electrode (Ch-N-Gr/GE) was always observed. Using the Ch-N-Gr/GE, the Pb²⁺ voltammetric response showed a pair of well defined, quasi-reversible anodic and cathodic peaks, with the peak potentials located at about -0.59 V and -0.69 V, respectively. The calibration curves were obtained over a large linear range, from 10^-7 to 10^-4 M Pb²⁺ concentration. Under optimized conditions, the detection limit was found to be 6.64 × 10^-8 M. The effect of several interfering species (such as other metallic cations or organic compounds of various concentrations) on the determination of Pb²⁺ concentration was also studied, and the results proved the selectivity of the proposed modified electrode. The validity and effectiveness of the method was further confirmed by trace determination of Pb²⁺ in real samples.

Electroanalytical method for determination of lead(II) in orange and apple using kaolin modified platinum electrode

This paper reports on the use of platinum electrode modified with kaolin (K/Pt) and square wave voltammetry for analytical detection of trace lead(II) in pure water, orange and apple samples. The electroanalytical procedure for determination of the Pb(II) comprises two steps: the chemical accumulation of the analyte under open-circuit conditions followed by the electrochemical detection of the preconcentrated species using square wave voltammetry. The analytical performances of the extraction method has been explored by studying the incubating time, and effect of interferences due to other ions. During the preconcentration step, Pb(II) was accumulated on the surface of the kaolin. The observed detection and quantification limits in pure water were 3.6x10(-9)molL(-1) and 1.2x10(-8)molL(-1), respectively. The precision of the method was also determined; the results was 2.35% (n=5).

Ca10(PO4)6(OH)2-modified carbon-paste electrode for the determination of trace lead(II) by square-wave voltammetry

The analytical performance of hydroxyapatite Ca10(PO4)6(OH)2(HAp) screen-printed sensors designed for the detection of metals was evaluated. The hydroxyapatite plays an important role in modern analytical electrochemistry due to their usefulness for the preparation of sensors giving rise to improved responses from metals. The suitable HAp-modified carbon-paste electrode (HAp-CPE) for the electrochemical determination of lead is illustrated in this work using cyclic and square-wave voltammetry in the potential range between -0.3 and -0.8V. Perchlorate acid solution (1.0molL(-1)) was employed as the supporting electrolyte. The voltammetric measurements were carried out using as working electrode HAp-CPE, and a platinum electrode and an SCE electrode as auxiliary and reference electrodes, respectively. Under the optimized working conditions, calibration graph is linear for 5min of preconcentration time with the detection limit 7.68x10(-10)molL(-1). This detection limit is remarkably lower than those reported previously using other modified electrodes or amperometric detection. The results indicate that this electrode is sensitive and effective for the determination of Pb2+.