An insight into the overoxidation of polypyrrole materials

{Co4O4} Cubanes in a conducting polymer matrix as bio-inspired molecular oxygen evolution catalysts

Exploration of efficient molecular water oxidation catalysts for long-term application remains a key challenge for the conversion of renewable energy sources into fuels. Cuboidal {Co4O4} complexes keep attracting interest as molecular water oxidation catalysts as they combine features of both heterogeneous and homogeneous catalysis with bio-inspired motifs. However, the application of many cluster-based catalysts for the oxygen evolution reaction still requires new stabilization strategies. Drawing inspiration from the stabilizing effects of natural polymers, we introduce a conductive polymer-hybrid approach to covalently immobilize {Co4O4} cubane oxo clusters as oxygen evolution catalysts. Polypyrrole is applied as an efficient p-type conducting polymer that promotes hole transfer during the oxygen evolution reaction, resulting in higher turnover frequency compared to the pristine {Co4O4} oxo cluster and heterogeneous Co-oxide benchmarks. The asymmetric coordination of {Co4O4} not only mitigates catalyst decomposition pathways, but also increases the catalytic efficiency by exposing a directed cofacial dihydroxide motif during catalysis.

The Alphabet of Nanostructured Polypyrrole

This review is devoted to polypyrrole and its morphology, which governs the electroactivity of the material. The macroscopic properties of the material are strictly relevant to microscopic ordering observed at the local level. During the synthesis, various (nano)morphologies can be produced. The formation of the ordered structure is dictated by the ability of the local forces and effects to induce restraints that help shape the structure. This review covers the aspects of morphology and roughness and their impact on the final properties of the modified electrode activity in selected applications.

Statistical Study of the Influence of Electrosynthesis Conditions on the Capacitance of Polypyrrole

Polypyrrole (PPy) is a promising material for the fabrication of flexible energy storage devices and much research has been published. However, no statistical tools have been used to relate PPy synthesis conditions to its energy storage performance, considering not only the main synthesis factors but also their interactions. In this work, we use a factorial design of experiments to evaluate the influence of two electropolymerization methods and three synthesis parameters on the energy storage capacity of PPy coatings. The polymers were characterized by cyclic voltammetry (CV), galvanostatic charge/discharge (GCD), electrochemical impedance spectroscopy (EIS), Raman spectroscopy, and scanning electron microscopy (SEM). Statistical tests showed that ClO₄ ^--doped PPy exhibits higher capacitances than p-toluenesulfonate (pTS)-doped PPy, with a maximum capacitance of 353.75 ± 1.6 F g^-1 at 1 A g^-1. However, the pTS-doped PPy had better cycling stability, losing only 10% of its original energy storage capability after 5000 charge-discharge cycles at 1 A g^-1. The best energy densities and power densities were 49.1 ± 0.2 Wh kg^-1 and 2297 ± 15 W kg^-1 (ClO₄ ^--doped PPy) and 47.8 ± 1.5 Wh kg^-1 and 2191 ± 91 W kg^-1 (pTS-doped PPy), respectively, which indicates that through statistical tools, the optimal synthesis conditions are refined to take advantage of the energy storage properties of this polymer.

Overoxidation of Intrinsically Conducting Polymers

Intrinsically conducting polymers may undergo significant changes of molecular structure and material properties when exposed to highly oxidizing conditions or very positive electrode potentials, commonly called overoxidation. The type and extent of the changes depend on the experimental conditions and chemical environment. They may proceed already at much lower rates at lower electrode potentials because some of the processes associated with overoxidation are closely related to more or less reversible redox processes employed in electrochemical energy conversion and electrochromism. These changes may be welcome for some applications of these polymers in sensors, extraction, and surface functionalization, but in many cases, the change of properties affects the performance of the material negatively, contributing to material and device degradation. This report presents published examples, experimental observations, and their interpretations in terms of both structural and of material property changes. Options to limit and suppress overoxidation are presented, and useful applications are described extensively.

The influence of physicochemical properties on the processibility of conducting polymers: A bioelectronics perspective

Conducting polymers (CPs) possess unique electrical and electrochemical properties and hold great potential for different applications in the field of bioelectronics. However, the widespread implementation of CPs in this field has been critically hindered by their poor processibility. There are four key elements that determine the processibility of CPs, which are thermal tunability, chemical stability, solvent compatibility and mechanical robustness. Recent research efforts have focused on enhancing the processibility of these materials through pre- or post-synthesis chemical modifications, the fabrication of CP-based complexes and composites, and the adoption of additive manufacturing techniques. In this review, the physicochemical and structural properties that underlie the performance and processibility of CPs are examined. In addition, current research efforts to overcome technical limitations and broaden the potential applications of CPs in bioelectronics are discussed. STATEMENT OF SIGNIFICANCE: This review details the inherent properties of CPs that have hindered their use in additive manufacturing for the creation of 3D bioelectronics. A fundamental approach is presented with consideration of the chemical structure and how this contributes to their electrical, thermal and mechanical properties. The review then considers how manipulation of these properties has been addressed in the literature including areas where improvements can be made. Finally, the review details the use of CPs in additive manufacturing and the future scope for the use of CPs and their composites in the development of 3D bioelectronics.

PEDOT percolation networks for reversible chemiresistive sensing of NO2

Detection of NO2 plays an important role in various safety applications. However, sensitive and reversible sensing of NO2 remains a challenge. Here we demonstrate the use of poly(3,4-ethylenedioxythiophene) (PEDOT) conducting polymer percolation networks for chemiresistive sensing of NO2. By adjusting the electrochemical polymerisation and doping conditions of the polymer, we show control over the relative contributions of oxidised and over-oxidised PEDOT to the sensing behaviour. Reversible NO2 sensors using only PEDOT as the sensor material are demonstrated. By operating the sensor near the electrical percolation threshold, a higher sensitivity is achieved compared to more traditional thin film based chemiresistive sensors. A limit of detection of 907 ± 102 ppb was achieved.

Plastic Antibody of Polypyrrole/Multiwall Carbon Nanotubes on Screen-Printed Electrodes for Cystatin C Detection

This work reports the design of a novel plastic antibody for cystatin C (Cys-C), an acute kidney injury biomarker, and its application in point-of-care (PoC) testing. The synthetic antibody was obtained by tailoring a molecularly imprinted polymer (MIP) on a carbon screen-printed electrode (SPE). The MIP was obtained by electropolymerizing pyrrole (Py) with carboxylated Py (Py-COOH) in the presence of Cys-C and multiwall carbon nanotubes (MWCNTs). Cys-C was removed from the molecularly imprinted poly(Py) matrix (MPPy) by urea treatment. As a control, a non-imprinted poly(Py) matrix (NPPy) was obtained by the same procedure, but without Cys-C. The assembly of the MIP material was evaluated in situ by Raman spectroscopy and the binding ability of Cys-C was evaluated by the cyclic voltammetry (CV) and differential pulse voltammetry (DPV) electrochemical techniques. The MIP sensor responses were measured by the DPV anodic peaks obtained in the presence of ferro/ferricyanide. The peak currents decreased linearly from 0.5 to 20.0 ng/mL of Cys-C at each 20 min successive incubation and a limit of detection below 0.5 ng/mL was obtained at pH 6.0. The MPPy/SPE was used to analyze Cys-C in spiked serum samples, showing recoveries <3%. This device showed promising features in terms of simplicity, cost and sensitivity for acute kidney injury diagnosis at the point of care.

Carbon Nanomaterials Embedded in Conductive Polymers: A State of the Art

Carbon nanomaterials are at the forefront of the newest technologies of the third millennium, and together with conductive polymers, represent a vast area of indispensable knowledge for developing the devices of tomorrow. This review focusses on the most recent advances in the field of conductive nanotechnology, which combines the properties of carbon nanomaterials with conjugated polymers. Hybrid materials resulting from the embedding of carbon nanotubes, carbon dots and graphene derivatives are taken into consideration and fully explored, with discussion of the most recent literature. An introduction into the three most widely used conductive polymers and a final section about the most recent biological results obtained using carbon nanotube hybrids will complete this overview of these innovative and beyond belief materials.

Efficient Transport Networks in a Dual Electron/Lithium-Conducting Polymeric Composite for Electrochemical Applications

In this work, an all-functional polymer material composed of the electrically conductive poly(3,4-ethylenedioxythiophene):poly(4-styrenesulfonic acid) (PEDOT:PSS) and lithium-conducting poly(ethylene oxide) (PEO) was developed to form a dual conductor for three-dimensional electrodes in electrochemical applications. The composite exhibits enhanced ionic conductivity (∼10^-4 S cm^-1) and, counterintuitively, electronic conductivity (∼45 S cm^-1) with increasing PEO proportion, optimal at a monomer ratio of 20:1 PEO:PEDOT. Microscopy reveals a unique morphology, where PSS interacts favorably with PEO, destabilizing PEDOT to associate into highly branched, interconnected networks that allow for more efficient electronic transport despite relatively low concentrations. Thermal and X-ray techniques affirm that the PSS-PEO domain suppresses crystallinity, explaining the high ionic conductivity. Electrochemical experiments in lithium cell environments indicate stability as a function of cycling and improved overpotential due to dual transport characteristics despite known issues with both individual components.

Nanostructured conducting molecularly imprinted polypyrrole based quartz crystal microbalance sensor for naproxen determination and its electrochemical impedance study

The overall process of preparation and sensing mechanism of naproxen (NAP) sensor.

Novel conducting polymer-heteropoly acid hybrid material for artificial photosynthetic membranes

Artificial photosynthetic (AP) approaches to convert and store solar energy will require membranes capable of conducting both ions and electrons while remaining relatively transparent and chemically stable. A new approach is applied herein involving previously described in situ chemical polymerization of electronically conducting poly(3,4-ethylenedioxythiophene) (PEDOT) in the presence of proton conducting heteropoly acid (HPA) phosphomolybdic acid (PMA). The electrochemical behaviour of the PEDOT/PMA hybrid material was investigated and it was found that the conducting polymer (CP) is susceptible to irreversible oxidative processes at potentials where water is oxidized. This will be problematic in AP devices should the process occur in very close proximity to a conducting polymer-based membrane. It was found that PEDOT grants the system good electrical performance in terms of conductivity and stability over a large pH window; however, the presence of PMA was not found to provide sufficient proton conductivity. This was addressed in an additional study by tuning the ionic (and in turn, electronic) conductivity in creating composites with the proton-permselective polymer Nafion. It was found that a material of this nature with near-equal conductivity for optimal chemical conversion efficiency will consist of roughly three parts Nafion and one part PEDOT/PMA.

Towards a Biocompatible, Biodegradable Copolymer Incorporating Electroactive Oligothiophene Units

As part of an ongoing effort to develop biocompatible, biodegradable conducting polymers, we report here the synthesis and characterization of a novel copolymer, 5,5"'bishydroxymethyl-3,3"'-dimethyl-2,2':5',2":5",2"'-quaterthiophene-co-adipic acid polyester (QAPE). This system was designed so as to incorporate alternating electroactive quaterthiophene units and biodegradable ester units into one macromolecular framework, while allowing for facile preparation of the polymer via a polycondensation reaction. In agreement with the design expectations, the ester groups were found to be incorporated into the polymer between the quaterthiophene subunits, as inferred from standard chemical and spectroscopic analyses. QAPE exhibited redox activity as detected by cyclic voltammetry and a new red-shifted absorption peak upon doping, providing support for the notion that the quaterthiophene units maintain electroactivity after incorporation into the QAPE polymer framework. The degradation, likely through surface erosion, of this polymer in the presence of cholesterol esterase was confirmed by the detection of a fluorescence signal at wavelengths corresponding to the quaterthiophene subunit and comparisons to appropriate controls. In vitro cytocompatability studies, carried out over 48 h, indicate that the QAPE polymer is nontoxic to Schwann cells.