Pd–TiO2/C as a methanol tolerant catalyst for oxygen reduction reaction in alkaline medium

Polyhedron shaped palladium nanostructures embedded on MoO2/PANI-g-C3N4 as high performance and durable electrocatalyst for oxygen reduction reaction

A hybrid catalyst support anchoring a noble metal catalyst could be a promising material for building interfacial bonding between metallic nanostructures and polymer functionalized carbon supports to improve the kinetics of oxygen reduction reaction (ORR). This study successfully prepared a polyhedron nanostructured Pd and MoO2-embedded polyaniline-functionalized graphitized carbon nitride (PANI-g-C3N4) surface using a chemical reduction method. The Pd-Mo/PANI-g-C3N4 achieved an ORR activity of 0.27 mA µg-1 and 1.14 mA cm-2 at 0.85 V, which were 4.5 times higher than those of commercial 20% Pt/C catalyst (0.06 mA µg-1 and 0.14 mA cm-2). In addition, the Pd-Mo/PANI-g-C3N4 retained ∼ 77.5% of its initial mass activity after 10,000 cycles, with only 30 mV half-wave potential reduction. Further, the engineered potential active sites in the catalyst material verified the significant improvement in the ORR activity of the catalyst with increased life-time, and theoretical calculations revealed that the synergistic effect of the catalytic components enhanced the ORR kinetics of the active sites.

AgO-decorated multi-dimensional chrysanthemum-like NiCo2O4 mounted on nickel foam as a highly efficient and stable electrocatalyst for the oxygen evolution reaction

AgO nanoparticles were successfully integrated into NiCo2O4 nanosheets for enhanced electrochemical catalysis ability and stability in the oxygen evolution reaction (OER). The chrysanthemum-like NiCo2O4/AgO composites mounted on nickel foam (NF) were synthesized by a hydrothermal-calcination method. AgO upgraded the ratio of Co3+/Co2+ and thus regulated the intrinsic activity of the species. The highly hierarchical structure of NiCo2O4/AgO composed of 0D AgO nanoparticles, 1D NiCo2O4 needles, 2D NiCo2O4 nanosheets, and 3D chrysanthemum-like bundles grown on NF bestowed the high surface area and mesoporous structure for the easy evolution of O2. The Ni atoms in NiCo2O4 originating in situ from NF in the process of AgO formation produced an integrated electrode of the active component of NiCo2O4 bound on NF with a superb highway for charge transfer. AgO significantly tuned the structure and physicochemical properties of NiCo2O4. As a result, NiCo2O4/AgO/NF exhibited excellent OER performance with an overpotential of 232 mV to obtain a current density of 10 mAcm-2 in an alkaline electrolyte, and the catalyst showed a small loss of the initial catalyst activity for 50 h and over 5000 cycles. This study provides a pathway for developing high-performance OER electrocatalysts.

Compositional and morphological engineering of in-situ-grown Ag nanoparticles on Cu substrate for enhancing oxygen reduction reaction activity: A novel electrochemical redox tuning approach

Silver nanoparticles (NPs) developed on a copper substrate, Ag NPs/Cu, are synthesized by a novel and facile galvanic replacement method performed in Ethaline deep eutectic solvent (DES). It reveals that the Ag NPs could be well dispersed on the Cu support via an in-situ electrochemical oxidation-reduction (ECO-ECR) activation process, which deliver significantly enhanced activity and stability for the oxygen reduction reaction (ORR) in alkaline media. The in-situ redox tuning triggers a reversible phase transformation of the formed initially Ag NPs, Ag ↔ Ag₂O, with surface reconstruction and gives rise to a strong metal-support interaction with tailored atomic/electronic structures, resulting in enhanced ORR activity. Impressively, the introduction of Ni^II ions can regulate the galvanic replacement kinetics by mediating the diffusion of Ag^I ions and subsequent growth of Ag on the Cu surface in Ethaline, leading to the formation of uniformly distributed Ag NPs. Coupled with redox activation, the optimal Ag-Ni₁ NPs/Cu_ECO-ECR exhibits ORR activity similar to that of the commercial state-of-the-art Pt/C catalyst, and better long-term durability (95% activity retention after 30,000 s), cyclic stability performance, and anti-poisoning capacity for methanol (96% after 3300 s), suggesting it a promising ORR electrocatalyst for practical application.

Oxygen Reduction Activity and Stability of Composite Pdx/Co-Nanofilms/C Electrocatalysts in Acid and Alkaline Media

The morphology tuning of Pd and Pd-M nanoparticles is one of the significant strategies to control the catalytic activity toward oxygen reduction reaction (ORR). In this study, composite Pdx/Co-nanofilms/C electrocatalysts of Pd nanoparticles implanted onto Co nanofilms were synthesized on an immiscible ionic liquid (IL)/water interface for ORR. The Pd nanoparticles implanted onto Co nanofilms show a marked distortion of crystal lattice and surface roughness. These Pdx/Co-nanofilms/C electrocatalysts exhibit enhanced activity for ORR compared with Pd/C and PdxCo/C catalysts in both acid and alkaline solutions, in which the Pd3/Co-nanofilms/C catalyst displays the highest ORR mass activity. The superior ORR mass activities of the fabricated Pdx/Co-nanofilms/C catalysts may be mainly attributed to their larger catalytic areas, which are conferred by the rough surface of Pd nanoparticles with a distorted crystal lattice, and the synergistic effect between the surface Pd atoms and the 2D Co nanofilm substrate. The relationship between ORR mass activity and Pd/Co atom ratio varies in different electrolytes. Furthermore, by using proper heat-treatment methods, the Pdx/Co-nanofilms/C catalysts exhibit improved cycling stability compared with pure Pd/C catalyst after extended potential cycling.

Niobium-doped titanium dioxide on a functionalized carbon supported palladium catalyst for enhanced ethanol electro-oxidation

Pd nanoparticles anchored on Nb-doped TiO₂ with functionalized carbon support (denoted as Pd/Nb–TiO₂–C) is synthesized through a controllable hydrolysis and impregnation method.

Ternary Pt–Pd–Ag alloy nanoflowers for oxygen reduction reaction electrocatalysis

Elemental composition, dimensionality and morphology are the main factors that influence the catalytic activity and stability of platinum-based and noble metal alloy nanocatalysts.

Ti3+-Promoted High Oxygen-Reduction Activity of Pd Nanodots Supported by Black Titania Nanobelts

One-dimensional nanocrystals favoring efficient charge transfer have attracted enormous attentions, and conductive nanobelts of black titania with a unique band structure and high electrical conductivity would be interestingly used in electrocatalysis. Here, Pd nanodots supported by two kinds of black titania, the oxygen-deficient titania (TiO_2-x) and nitrogen-doped titania (TiO_2-x:N), were synthesized as efficient composite catalysts for oxygen-reduction reaction (ORR). These composite catalysts show improved catalytic activity with lower overpotential and higher limited current, compared to the Pd nanodots supported on the white titania (Pd/TiO₂). The improved activity is attributed to the relatively high conductivity of black titania nanobelts for efficient charge transfer (CT) between Ti³⁺ species and Pd nanodots. The CT process enhances the strong metal-support interaction (SMSI) between Pd and TiO₂, which lowers the absorption energy of O₂ on Pd and makes it more suitable for oxygen reduction. Because of the stronger interaction between Pd and support, the Pd/TiO_2-x:N also shows excellent durability and immunity to methanol poisoning.

High-Performance Pd3Pb Intermetallic Catalyst for Electrochemical Oxygen Reduction

Extensive efforts to develop highly active and strongly durable electrocatalyst for oxygen reduction are motivated by a need for metal-air batteries and fuel cells. Here, we report a very promising catalyst prototype of structurally ordered Pd-based alloys, Pd3Pb intermetallic compound. Such structurally ordered Pd3Pb/C exhibits a significant increase in mass activity. More importantly, compared to the conventional Pt/C catalysts, ordered Pd3Pb/C is highly durable and exhibits a much longer cycle life and higher cell efficiency in Zn-air batteries. Interestingly, ordered Pd3Pb/C possesses very high methanol tolerance during electrochemical oxygen reduction, which make it an excellent methanol-tolerant cathode catalyst for alkaline polymer electrolyte membrane fuel cells. This study provides a promising route to optimize the synthesis of ordered Pd-based intermetallic catalysts for fuel cells and metal-air batteries.

V–P–O compound encapsulated palladium nanoparticles supported on carbon nanotubes as a methanol-tolerant oxygen reduction electrocatalyst

Palladium (Pd) nanoparticles encapsulated by the vanadium–phosphorus–oxygen (V–P–O) compound were synthesized and decorated on carbon nanotubes (Pd@V–P–O/CNT) through an oleylamine-mediated method stabilized with trioctylphosphine.

Defective TiO2-supported Cu nanoparticles as efficient and stable electrocatalysts for oxygen reduction in alkaline media

Nanocomposites based on TiO2-supported copper nanoparticles were prepared by a hydrothermal method where copper nanoparticles with or without the passivation of 1-decyne were chemically grown onto TiO2 nanocolloid surfaces (and hence denoted as CuHC10/TiO2 and Cu/TiO2, respectively). Transmission electron microscopy measurements showed that the size of the hybrid nanoparticles was 5-15 nm in diameter with clearly defined lattice fringes for anatase TiO2(101) and Cu(111). The formation of anatase TiO2 nanoparticles was also observed by X-ray diffraction measurements. FTIR measurements confirmed successful attachment of alkyne ligands onto the surface of the copper nanoparticles via Cu-C≡ interfacial bonds in CuHC10/TiO2. XPS measurements suggested the formation of CuO in both samples with a higher concentration in Cu/TiO2, and interestingly Ti(3+) species were found in CuHC10/TiO2 but were absent in Cu/TiO2 or TiO2 nanoparticles. Electrochemical studies demonstrated that both Cu/TiO2 and CuHC10/TiO2 exhibited a markedly improved electrocatalytic performance in the oxygen reduction reaction, as compared to TiO2 nanocolloids alone, in the context of the onset potential, the number of electrons transferred and the kinetic current density. Importantly, among the series, CuHC10/TiO2 exhibited the best ORR activity with a high current density, an almost four-electron reduction pathway and long-term stability after 4000 cycles at high potentials, which may be ascribed to the defective TiO2 structures in combination with surface ligand engineering.

Poly(diallyldimethylammonium chloride)-functionalized reduced graphene oxide supported palladium nanoparticles for enhanced methanol oxidation

PDDA-functionalized rGO supported nano-size Pd particles show superior MOR activity in alkaline medium.

Titanium dioxide as a catalyst support in heterogeneous catalysis

The lack of stability is a challenge for most heterogeneous catalysts. During operations, the agglomeration of particles may block the active sites of the catalyst, which is believed to contribute to its instability. Recently, titanium oxide (TiO₂) was introduced as an alternative support material for heterogeneous catalyst due to the effect of its high surface area stabilizing the catalysts in its mesoporous structure. TiO₂ supported metal catalysts have attracted interest due to TiO₂ nanoparticles high activity for various reduction and oxidation reactions at low pressures and temperatures. Furthermore, TiO₂ was found to be a good metal oxide catalyst support due to the strong metal support interaction, chemical stability, and acid-base property. The aforementioned properties make heterogeneous TiO₂ supported catalysts show a high potential in photocatalyst-related applications, electrodes for wet solar cells, synthesis of fine chemicals, and others. This review focuses on TiO₂ as a support material for heterogeneous catalysts and its potential applications.

Combinatorial high-throughput screening for highly active Pd-Ir-Ce based ternary catalysts in electrochemical oxygen reduction reaction

A combinatorial library having 66 different ternary compositions of Pd-Ir-Ce was prepared via the impregnation method to find the optimum ternary composition with the highest performance toward oxygen reduction reaction (ORR) in acid media. Its performance in ORR activity of the combinatorial array was evaluated through two different combinatorial high-throughput screening methods to gain validity: (1) multielectrode half-cell method and (2) optical screening method. From the combinatorial results, the spot at 79:12:9 for Pd-Ir-Ce (at. %) in the array showed the highest ORR activity. The electrochemical characterizations of the single catalyst demonstrates that the optimized Pd79Ir12Ce9/C catalyst shows 1.5 times the ORR activity compared to that of Pd/C catalyst at 0.85 V (vs. RHE). In the Pd-Ir-Ce based catalysts, X-ray diffraction (XRD) and X-ray photoelectron spectroscopy (XPS) results reveal that Ir and Ce are present in the form of IrO2 and CeO2, respectively, and the electron configuration of Pd is effectively modified through the decoration with IrO2 and CeO2. From the results, we suggest that the electro-modification of Pd through strong metal-metal oxide interaction with IrO2-CeO2 was a reason for the enhanced ORR activity.