Strong piezo-electrochemical effect of multiferroic BiFeO 3 square micro-sheets for mechanocatalysis

Ultrasonic-driven degradation of organic pollutants using piezoelectric catalysts WS2/Bi2WO6 heterojunction composites

Water pollution has been made worse by the widespread use of organic dyes and their discharge, which has coincided with the industry's rapid development. Piezoelectric catalysis, as an effective wastewater purification method with promising applications, can enhance the catalyst activity by collecting tiny vibrations in nature and is not limited by sunlight. In this work, we designed and synthesized intriguing WS2/Bi2WO6 heterojunction nanocomposites, investigated their shape, structure, and piezoelectric characteristics using a range of characterization techniques, and used ultrasound to accelerate the organic dye Rhodamine B (RhB) degradation in wastewater. In comparison to the pristine monomaterials, the results demonstrated that the heterojunction composites demonstrated excellent degradation and stability of RhB under ultrasonic circumstances. The existence of heterojunctions and the internal piezoelectric field created by ultrasonic driving work in concert to boost catalytic performance, and the organic dye's rate of degradation is further accelerated by the carriers that are mutually transferred between the composites.

Review on Multicatalytic Behavior of Ba0.85Ca0.15Ti0.9Zr0.1O3 Ceramic

Ferroelectric materials are known to possess multicatalytic abilities that are nowadays utilized for removing organic pollutants from water via piezocatalysis, photocatalysis, piezo-photocatalysis, and pyrocatalysis processes. The Ba0.85Ca0.15Ti0.9Zr0.1O3 (BCZTO) ceramic is one such ferroelectric composition that has been extensively studied for electrical and electronic applications. Furthermore, the BCZTO ceramic has also shown remarkable multicatalytic performance in water-cleaning applications. The present review explores the potentiality of BCZTO for water-cleaning and bacterial-killing applications. It also highlights the fundamentals of ferroelectric ceramics, the importance of electric poling, and the principles underlying piezocatalysis, photocatalysis, and pyrocatalysis processes in addition to the multicatalytic capability of ferroelectric BCZTO ceramic.

Insight into the synergistic mechanism of sonolysis and sono-induced BiFeO3 nanorods piezocatalysis in atenolol degradation: Ultrasonic parameters, ROS and degradation pathways

Herein, BiFeO₃ nanorods (BFO NRs) was synthesized as the piezoelectric catalyst. The synergistic mechanism of sonolysis and sono-induced BFO-piezocatalysis in atenolol degradation was revealed and the effect of ultrasonic parameters on it was investigated for the first time. The results indicated that 100 kHz was the optimal frequency for the sonolytic and sono-piezocatalytic degradation of atenolol in ultrasound/BFO nanorods (US/BFO NRs) system, with the highest synergistic coefficient of 3.43. The piezoelectric potential differences of BFO NRs by COMSOL Multiphysics simulations further distinguishing that the impact of cavitation shock wave and ultrasonic vibration from sonochemistry reaction (i.e., 2.48, -2.48 and 6.60 V versus 0.008, -0.008 and 0.02 V under tensile, compressive and shear stress at 100 kHz). The latter piezoelectric potentials were insufficient for reactive-oxygen-species (ROS) generation, while the former contributed to 53.93% •OH yield in US/BFO NRs system. Sono-piezocatalysis was found more sensitive to ultrasonic power density than sonolysis. The quenching experiments and ESR tests indicated that the ROS contribution in atenolol degradation followed the order of •OH > ¹O₂ > h⁺ > O₂^•- in US/BFO NRs system and ¹O₂ generation is exclusively dissolved-oxygen dependent. Four degradation pathways for atenolol in US/BFO NRs system were proposed via products identification and DFT calculation. Toxicity assessment by ECOSAR suggested the toxicity of the degradation products could be controlled.

Transition metal dichalcogenides nanomaterials based piezocatalytic activity: recent progresses and outlook

Piezoelectric materials have drawn significant attention from researchers in the recent past as the piezo-potential, induced by applied external stress, generates an electric field, which paves the way for the creation and transfer of electrons and holes. After the theoretical prediction of the existence of the piezoelectric effect in transition metal dichalcogenides (TMDCs) semiconductors, intense research efforts have been made by various researchers to demonstrate the effect experimentally. In addition 2D TMDCs exhibit layer-dependent tunable electronic structure, strongly bound excitons, enhanced catalytic activity at their edges, and novel spin/pseudospin degrees of freedom. The edge sites and activated basal planes of 2D TMDCs are shown to be highly active toward catalysis of the hydrogen evolution reaction (HER). However, as compared to electrocatalytic or even photocatalytic performances, TMDC materials exhibit poorer piezocatalytic activity, in general. Therefore, a numbers of research strategies have been made to intensify the piezoelectric effect by synthesizing different types of TMDC nanostructures, by coupling the piezoelectric effect with the photocatalytic effect, by doping with other materials, etc. This review discusses various techniques of synthesis of TMDCs nanostructures and the recent progresses in applications of TMDC nanomaterials in piezocatalysis. In the present article, the piezocatalytic dye degradation performances and HER activity using different TMDCs have been reviewed in detail. Different methods of increasing the piezocatalytic activity of various TMDCs nanostructures have been illustrated. Here, it has also been attempted to systematically summarize and provide an outlook of the charge transfer behaviour and catalytic mechanisms in large varieties of TMDC piezocatalysts and piezo-photocatalysts. In addition, advanced applications of TMDC piezocatalytic materials as piezoelectric nanogenerator, piezocatalytic dye degradation, piezo-phototronic dye degradation and HER studies have been highlighted.

Highly Efficient Flexocatalysis of Two-Dimensional Semiconductors

Catalysis is vitally important for chemical engineering, energy, and environment. It is critical to discover new mechanisms for efficient catalysis. For piezoelectric/pyroelectric/ferroelectric materials that have a non-centrosymmetric structure, interfacial polarization-induced redox reactions at surfaces leads to advanced mechanocatalysis. Here, the first flexocatalysis for 2D centrosymmetric semiconductors, such as MnO₂  nanosheets, is demonstrated largely expanding the polarization-based-mechanocatalysis to 2D centrosymmetric materials. Under ultrasonic excitation, the reactive species are created due to the strain-gradient-induced flexoelectric polarization in MnO₂  nanosheets composed nanoflowers. The organic pollutants (Methylene Blue et al.) can be effectively degraded within 5 min; the performance of the flexocatalysis is comparable to that of state-of-the-art piezocatalysis, with excellent stability and reproducibility. Moreover, the factors related to flexocatalysis such as material morphology, adsorption, mechanical vibration intensity, and temperature are explored, which give deep insights into the mechanocatalysis. This study opens the field of flexoelectric effect-based mechanochemistry in 2D centrosymmetric semiconductors.

Effect of Poling on Multicatalytic Performance of 0.5Ba(Zr0.2Ti0.8)O3-0.5(Ba0.7Sr0.3)TiO3 Ferroelectric Ceramic for Dye Degradation

Ferroelectric materials with a spontaneous polarization are proven to be potential multicatalysts in water remediation applications. The composition of 0.5Ba(Zr_0.2Ti_0.8)O₃-0.5(Ba_0.7Sr_0.3)TiO₃ (BST-BZT) was examined for photocatalysis, piezocatalysis, and piezo-photocatalysis processes by degrading an azo dye named methylene blue (MB). Generally, dis-aligned dipoles restrict the catalytic activities due to which the BST-BZT powder sample was poled by the corona poling technique. Coupled piezocatalysis and photocatalysis process, i.e., the piezo-photocatalysis process has shown maximum dye degradation. There was a significant improvement in degradation efficiency by using a poled BST-BZT sample compared to the unpoled sample in all processes, thus the results suggest an extensive scope of poled ferroelectric ceramic powder in the catalysis field.

The Piezo-Fenton synergistic effect of ferroelectric single-crystal BaTiO3 nanoparticles for high-efficiency catalytic pollutant degradation in aqueous solution

Nano-ferroelectric materials have excellent piezoelectric performance and can degrade organic dye by ultrasonic vibration in an aqueous solution. Here, BaTiO₃ (BT) nanoparticles were prepared by a sol-gel/hydrothermal method and further applied in dye degradation in wastewater. BT nanoparticles exhibited excellent catalytic performance for organic dye molecule degradation through the piezo-Fenton synergistic effect. It was found that both the degradation efficiency and reaction rate were boosted by the increase of the molecular weight of organic dyes. The degradation efficiency toward different organic dyes exhibited a trend of CR > ABK > TH > RhB > MB > MO. For example, a high piezo-Fenton-catalytic degradation ratio of 82.8% at 5 min and 0.337 min^-1 rate constant were achieved for the CR dye solution (10 mg L^-1), which were 3.2 and 6.4 times the corresponding values of piezo-catalytic only degradation. These results mainly originate from the intrinsic properties of BT nanoparticles that can enhance the separation of charge and promote the formation of hydrogen peroxide (H₂O₂) and hydroxyl radicals (·OH) under ultrasonic vibration. Furthermore, the reaction of Fe(II) with H₂O₂ can further enhance the formation of ·OH, which can accelerate the degradation of organic dyes. These results indicate that the piezo-Fenton synergistic effect may provide a new clue for the development of the wastewater treatment field under mechanical vibration.

Enzyme-nanozyme cascade colorimetric sensor platform: a sensitive method for detecting human serum creatinine

Creatinine, as a significant biomarker for kidney, thyroid, and muscle dysfunction-related diseases, detection is of great important meaning. In this paper, an enzyme-nanozyme cascade sensing platform was developed for visual creatinine detection. Perovskite oxide BiFeO₃ synthesized by a sol-gel method was applied as a nanozyme, showing excellent peroxidase-like activity. During detection, creatinine was oxidized in turn by three natural enzymes (creatinase, creatininase, and sarcosine oxidase) to produce H₂O₂, and H₂O₂ was then catalyzed by the BiFeO₃ nanozyme, resulting in the change of achromatous 3,3',5,5'-tetramethylbenzidine (TMB) into blue oxidized TMB (oxTMB). Based on this principle, visual quantification of creatinine was realized. Due to the high stability and catalytic efficiency of nanozyme, the cascade sensing platform can be used to detect creatinine in a broad range of 0.5-150 μM with a detection limit of 0.09 μM. Meanwhile, thanks to the specificity of the natural enzymes, the platform exhibited admirable selectivity for creatinine determination despite the existence of a variety of interfering substances, which were successfully adopted to measure the level of creatinine in human serums. The cascade sensing platform is expected to serve the determination of a large number of biomarkers by simply alternating the natural enzymes.

Engineering the Defects and Microstructures in Ferroelectrics for Enhanced/Novel Properties: An Emerging Way to Cope with Energy Crisis and Environmental Pollution

In the past century, ferroelectrics are well known in electroceramics and microelectronics for their unique ferroelectric, piezoelectric, pyroelectric, and photovoltaic effects. Nowadays, the advances in understanding and tuning of these properties have greatly promoted a broader application potential especially in energy and environmental fields, by harvesting solar, mechanical, and heat energies. For example, high piezoelectricity and high pyroelectricity can be designed by defect or microstructure engineering for piezo- and pyro-catalyst, respectively. Moreover, highly piezoelectric and broadband (UV-Vis-NIR) light-responsive ferroelectrics can be designed via defect engineering, giving rise to a new concept of photoferroelectrics for efficient photocatalysis, piezocatalysis, pyrocatalysis, and related cocatalysis. This article first summarizes the recent developments in ferroelectrics in terms of piezoelectricity, pyroelectricity, and photovoltaic effects based on defect and microstructure engineering. Then, the potential applications in energy generation (i.e., photovoltaic effect, H2 generation, and self-powered multisource energy harvesting and signal sensing) and environmental protection (i.e., photo-piezo-pyro- cocatalytic dye degradation and CO2 reduction) are reviewed. Finally, the outlook and challenges are discussed. This article not only covers an overview of the state-of-art advances of ferroelectrics, but also prospects their applications in coping with energy crisis and environmental pollution.

High Humidity Response of Sol-Gel-Synthesized BiFeO3 Ferroelectric Film

In this work, a BiFeO₃ film is prepared via a facile sol–gel method, and the effects of the relative humidity (RH) on the BiFeO₃ film in terms of capacitance, impedance and current–voltage (I–V) are explored. The capacitance of the BiFeO₃ film increased from 25 to 1410 pF with the increase of RH from 30% to 90%. In particular, the impedance varied by more than two orders of magnitude as RH varied between 30% and 90% at 10 Hz, indicating a good hysteresis and response time. The mechanism underlying humidity sensitivity was analyzed by complex impedance spectroscopy. The adsorption of water molecules played key roles at low and high humidity, extending the potential application of ferroelectric BiFeO₃ films in humidity-sensitive devices.

Piezoelectric Effect Enhanced Photocatalytic Activity of Pt/Bi3.4Gd0.6Ti3O12 Plasmonic Photocatalysis

Novel Pt/Bi_3.4Gd_0.6Ti₃O₁₂ heterojunction was synthesized by a decoration of Pt nanoparticles (PtNPs) on the surface of piezoelectric Bi_3.4Gd_0.6Ti₃O₁₂ (BGTO) through an impregnation process. The photocatalytic, piezo-catalytic, and piezo-photocatalytic activities of the Pt/BGTO heterojunction for methyl orange (MO) degradation were investigated under ultrasonic excitation and whole spectrum light irradiation. The internal piezoelectric field of BGTO and a plasmonic effect have been proven important for the photocatalytic activity of the heterojunctions. Pt/BGTO exhibited an optimum photocatalytic degradation performance of 92% for MO in 70 min under irradiation of whole light spectrum and ultrasonic coexcitation, and this value was about 1.41 times higher than the degradation rate under whole spectrum light irradiation alone. The PtNPs in Pt/BGTO heterojunction can absorb the incident light intensively, and induce the collective oscillation of surface electrons due to the surface plasmon resonance (SPR) effect, thus generating “hot” electron–hole pairs. The internal piezoelectric field produced in BGTO by ultrasonic can promote the separation of SPR-induced “hot” charge carriers and facilitate the production of highly reactive oxidation radicals, thus enhancing Pt/BGTO heterojunction′s photocatalytic activity for oxidizing organic dyes.

NaNbO3 Nanorods: Photopiezocatalysts for Elevated Bacterial Disinfection and Wastewater Treatment

In the present work, ferroelectric sodium niobate (NaNbO₃) nanorods are formulated to attain photopiezocatalysis for water pollutant degradation and bacterial disinfection. NaNbO₃ nanorods, integrating the advantages of photocatalysis (generation of free charge carriers) and piezocatalysis (separation of these charge carriers), possess synergistic effects, which results in a higher catalytic activity than photocatalysis and piezocatalysis alone. Active species that are involved in the catalytic process are found to be ^•O₂ ^- < OH^• < h⁺, indicating the significance of piezocatalysis and photocatalysis. The degradation efficiency of sodium niobate (NaNbO₃) nanorods for Rhodamine B in the presence of both sunlight and ultrasonic vibration is 98.9% within 60 min (k = 7.6 × 10^-2 min^-1). The piezo potential generated by NaNbO₃ nanorods was reported to be 16 V. The antibacterial activity of the produced sample was found to be effective against Escherichia coli. With inhibitory zones of 23 mm, sodium niobate has a greater antibacterial activity.

Piezo-phototronic effect on photocatalysis, solar cells, photodetectors and light-emitting diodes

The piezo-phototronic effect (a coupling effect of piezoelectric, photoexcitation and semiconducting properties, coined in 2010) has been demonstrated to be an ingenious and robust strategy to manipulate optoelectronic processes by tuning the energy band structure and photoinduced carrier behavior. The piezo-phototronic effect exhibits great potential in improving the quantum yield efficiencies of optoelectronic materials and devices and thus could help increase the energy conversion efficiency, thus alleviating the energy shortage crisis. In this review, the fundamental principles and challenges of representative optoelectronic materials and devices are presented, including photocatalysts (converting solar energy into chemical energy), solar cells (generating electricity directly under light illumination), photodetectors (converting light into electrical signals) and light-emitting diodes (LEDs, converting electric current into emitted light signals). Importantly, the mechanisms of how the piezo-phototronic effect controls the optoelectronic processes and the recent progress and applications in the above-mentioned materials and devices are highlighted and summarized. Only photocatalysts, solar cells, photodetectors, and LEDs that display piezo-phototronic behavior are reviewed. Material and structural design, property characterization, theoretical simulation calculations, and mechanism analysis are then examined as strategies to further enhance the quantum yield efficiency of optoelectronic devices via the piezo-phototronic effect. This comprehensive overview will guide future fundamental and applied studies that capitalize on the piezo-phototronic effect for energy conversion and storage.

2D Piezoelectric Bi2 MoO6 Nanoribbons for GSH-Enhanced Sonodynamic Therapy

Reducing the scavenging capacity of reactive oxygen species (ROS) and elevating ROS production are two primary goals of developing novel sonosensitizers for sonodynamic therapy (SDT). Hence, ultrathin 2D Bi2 MoO6 -poly(ethylene glycol) nanoribbons (BMO NRs) are designed as piezoelectric sonosensitizers for glutathione (GSH)-enhanced SDT. In cancer cells, BMO NRs can consume endogenous GSH to disrupt redox homeostasis, and the GSH-activated BMO NRs (GBMO) exhibit an oxygen-deficient structure, which can promote the separation of electron-hole pairs, thereby enhancing the efficiency of ROS production in SDT. The ultrathin GBMO NRs are piezoelectric, in which ultrasonic waves introduce mechanical strain to the nanoribbons, resulting in piezoelectric polarization and band tilting, thus accelerating toxic ROS production. The as-synthesized BMO NRs enable excellent computed tomography imaging of tumors and significant tumor suppression in vitro and in vivo. A piezoelectric Bi2 MoO6 sonosensitizer-mediated two-step enhancement SDT process, which is activated by endogenous GSH and amplified by exogenous ultrasound, is proposed. This process not only provides new options for improving SDT but also broadens the application of 2D piezoelectric materials as sonosensitizers in SDT.

Separable Magnetic Fe3O4@MoS2 Composite for Adsorption and Piezo-Catalytic Degradation of Dye

Well-designed composite catalysts are of increasing concern due to their improved performance compared to individual components. Herein, we designed and synthesized an Fe3O4@MoS2 composite via a simple hydrothermal method. As for the resultant composite, the MoS2 nanolayers presented a novel piezo-catalytic effect, while the Fe3O4 core provided a magnetic separation property. The structure and properties of Fe3O4@MoS2 were determined by relevant experiments. It was found that Fe3O4@MoS2 exhibited enhanced piezo-catalytic degradation of rhodamine B and good magnetic recovery/recycling features. The kobs for rhodamine B degradation over Fe3O4@MoS2 was 0.019 min−1—a little longer than that over MoS2 (0.013 min−1). Moreover, Fe3O4@MoS2 also showed a favorable ability to adsorb rhodamine B in solution, with a saturation adsorption of 26.8 mg/g. Further studies revealed that piezo-electrons, holes, and superoxide anions were key species in the piezo-catalytic degradation of rhodamine B. Notably, the step where oxygen trapped electrons to produce superoxide anions had a significant impact on the degradation of the dye. This work, not limited to the development of a high-performance MoS2-based piezo-catalyst, is expected to provide new insights into the working mechanisms and process profiles of composite piezo-catalysts.

Differences and Similarities of Photocatalysis and Electrocatalysis in Two-Dimensional Nanomaterials: Strategies, Traps, Applications and Challenges

Photocatalysis and electrocatalysis have been essential parts of electrochemical processes for over half a century. Recent progress in the controllable synthesis of 2D nanomaterials has exhibited enhanced catalytic performance compared to bulk materials. This has led to significant interest in the exploitation of 2D nanomaterials for catalysis. There have been a variety of excellent reviews on 2D nanomaterials for catalysis, but related issues of differences and similarities between photocatalysis and electrocatalysis in 2D nanomaterials are still vacant. Here, we provide a comprehensive overview on the differences and similarities of photocatalysis and electrocatalysis in the latest 2D nanomaterials. Strategies and traps for performance enhancement of 2D nanocatalysts are highlighted, which point out the differences and similarities of series issues for photocatalysis and electrocatalysis. In addition, 2D nanocatalysts and their catalytic applications are discussed. Finally, opportunities, challenges and development directions for 2D nanocatalysts are described. The intention of this review is to inspire and direct interest in this research realm for the creation of future 2D nanomaterials for photocatalysis and electrocatalysis.

Tribocatalytic degradation of dyes by tungsten bronze ferroelectric Ba2.5Sr2.5Nb8Ta2O30 submicron particles

Searching for a new approach in environmental remediation in terms of dye degradation is important in industrialized society. In this work, ferroelectric Ba2.5Sr2.5Nb8Ta2O30 (BSNT) submicron powders prepared by the high-temperature solid-phase method are used for dye degradation under magnetic stirring. The dye in solution can be quickly degraded by magnetically stirring BSNT submicron particles in the dark in ambient temperature conditions. More importantly, the degradation efficiency can be greatly improved through simple modification of the stirring materials from glass to polypropylene, with a degradation efficiency of rhodamine B as high as 99% in 1.5 h at a gentle stirring speed of 300 rpm. Control experiments reveal that the degradation of the dye is mainly contributed by the friction between BSNT submicron particles and PTFE stirring rods. It is proposed that the friction between ferroelectric polar BSNT particles and PTFE causes charge transfer and induces a non-zero internal electric field to drive the separation of electron-hole pairs in BSNT particles, resulting in a novel tribocatalytic degradation of the dye, which is proven by the detection of ˙OH and ˙O2 - intermediate products during stirring. This work demonstrates that the friction energy of ferroelectric materials with strong polarization is an alternative approach for highly efficient dye degradation.

Strong piezocatalysis in barium titanate/carbon hybrid nanocomposites for dye wastewater decomposition

In this work, the strong piezocatalysis is found in the two-step hydrothermally-synthesized barium titanate/carbon hybrid nanocomposites and is used for rhodamine B dye decomposition. As the carbon content increases from 0 to 5 wt%, the catalytic performance of hybrid nanocomposites first increases and then slightly decreases. When the carbon content increases to 2 wt%, the barium titanate/carbon hybrid nanocomposites exhibit the optimal piezocatalytic performance, which have the ~75.5% dye decomposition ratio and the ~0.04901 min^-1 reaction rate constant after the 40 min vibration stimulation, while that of the pure barium titanate are 48.4% and 0.01942 min^-1, respectively. The improvement of piezocatalytic performance in barium titanate/carbon hybrid nanocomposites can be ascribed to the action of carbon's charge transfer which promotes the effective separation of the piezoelectrically-induced electric charges. After three runs recycle utilization tests, the barium titanate/carbon hybrid nanocomposites still exhibit ~70% decomposition ratio of rhodamine B dye. The strong piezocatalytic performance and the good reusability make the barium titanate/carbon hybrid nanocomposites potential in the field of wastewater treatment through utilizing natural vibration energy in future.

Fast and Efficient Piezo/Photocatalytic Removal of Methyl Orange Using SbSI Nanowires

Piezocatalysis is a novel method that can be applied for degradation of organic pollutants in wastewater. In this paper, ferroelectric nanowires of antimony sulfoiodide (SbSI) have been fabricated using a sonochemical method. Methyl orange (MO) was chosen as a typical pollutant, as it is widely used as a dye in industry. An aqueous solution of MO at a concentration of 30 mg/L containing SbSI nanowires (6 g/L) was subjected to ultrasonic vibration. High degradation efficiency of 99.5% was achieved after an extremely short period of ultrasonic irradiation (40 s). The large reaction rate constant of 0.126(8) s^-1 was determined for piezocatalytic MO decomposition. This rate constant is two orders of magnitude larger than values of reaction rate constants reported in the literature for the most efficient piezocatalysts. These promising experimental results have proved a great potential of SbSI nanowires for their application in environmental purification and renewable energy conversion.

Piezoelectric Materials for Controlling Electro-Chemical Processes

Piezoelectric materials have been analyzed for over 100 years, due to their ability to convert mechanical vibrations into electric charge or electric fields into a mechanical strain for sensor, energy harvesting, and actuator applications. A more recent development is the coupling of piezoelectricity and electro-chemistry, termed piezo-electro-chemistry, whereby the piezoelectrically induced electric charge or voltage under a mechanical stress can influence electro-chemical reactions. There is growing interest in such coupled systems, with a corresponding growth in the number of associated publications and patents. This review focuses on recent development of the piezo-electro-chemical coupling multiple systems based on various piezoelectric materials. It provides an overview of the basic characteristics of piezoelectric materials and comparison of operating conditions and their overall electro-chemical performance. The reported piezo-electro-chemical mechanisms are examined in detail. Comparisons are made between the ranges of material morphologies employed, and typical operating conditions are discussed. In addition, potential future directions and applications for the development of piezo-electro-chemical hybrid systems are described. This review provides a comprehensive overview of recent studies on how piezoelectric materials and devices have been applied to control electro-chemical processes, with an aim to inspire and direct future efforts in this emerging research field.

Synthesizing BaTiO3 Nanostructures to Explore Morphological Influence, Kinetics, and Mechanism of Piezocatalytic Dye Degradation

Piezocatalysts have attracted much attention due to their excellent degradation ability for organics. In this work, three types of BaTiO₃ (BTO) nanostructures, including hydrothermally synthesized nanocubes (NCs), sol-gel calcined nanoparticles (NPs), and electrospun nanofibers (NFs), are prepared for catalyzing the dye degradation. Compared with the NCs and NPs, the NFs exhibit a higher piezocatalytic degradation performance due to the large specific surface area, fine crystal size, and easy deformation structure. Moreover, the kinetic factors, including initial dye concentration, ionic strength, ultrasonic power, and applied action, influencing the degradation performance of the BTO NFs are analyzed deeply. A high degradation rate constant of 0.0736 min^-1 is achieved for rhodamine B, which is superior compared with the previous reports. The excellent stability of BTO NFs is demonstrated by the cycling tests, where a high degradation efficiency of 97.6% within 110 min is still obtained after the third cycle. Furthermore, the mechanism of piezocatalysis revealed that the hydroxyl and superoxide radicals are the main reactive species in the degradation process. This work is of importance for the development of high-performance piezocatalysts and highlights the potential of piezocatalysis for water remediation.

Piezoelectric Material-Polymer Composite Porous Foam for Efficient Dye Degradation via the Piezo-Catalytic Effect

Piezoelectric nanomaterials have been utilized to realize effective charge separation for degrading organic pollutants in water under the action of mechanical vibrations. However, in particulate form, the nanostructured piezoelectric catalysts can flow into the aqueous pollutant and limit its recyclability and reuse. Here, we report a new method of using a barium titanate (BaTiO₃, BTO)-polydimethylsiloxane composite porous foam catalyst to address the challenge of secondary pollution and reusable limits. Piezo-catalytic dye degradation activity of the porous foam can degrade a Rhodamine B (RhB) dye solution by ∼94%, and the composite material exhibits excellent stability after repeated decomposition of 12 cycles. It is suggested that under ultrasonic vibrations, the piezoelectric BTO materials create separated electron-hole pairs that react with hydroxyl ions and oxygen molecules to generate superoxide (^•O₂^-) and hydroxyl (^•OH) radicals for organic dye degradation. The degradation efficiency of RhB is associated with the piezoelectric constant, the specific surface area, and the shape of the material.

High-efficient synergy of piezocatalysis and photocatalysis in bismuth oxychloride nanomaterial for dye decomposition

In this work, it is found that the hydrothermally-synthesized bismuth oxychloride can behave both the piezocatalysis and photocatalysis for the Rhodamine B dye decomposition. ∼99% decomposition efficiency is achieved after both vibrating and lighting the Rhodamine B dye solution for ∼96 min with the addition of bismuth oxychloride catalyst, while the ∼72% and ∼26% decomposition efficiencies are obtained for only photocatalysis or only piezocatalysis respectively. In bi-catalysis, the mechanical strain produced due to vibration will directly provide an electric field that will increase the separation between the photo-induced electron-hole pairs, yielding to the enhanced decomposition performance of bi-catalysis. There is no significant change in the bi-catalytic performance of bismuth oxychloride nanomaterial observed after being recycled four times. Bismuth oxychloride catalyst is potential for the bi-catalytic decomposition treatment of wastewater through harvesting both the environmental vibration energy and light energy.

Enhanced piezocatalytic, photocatalytic and piezo-/photocatalytic performance of diphasic Ba1−xCaxTiO3 nanowires near a solubility limit

Diphasic Ba_1−xCa_xTiO₃ nanowires near a solubility limit exhibit enhanced piezocatalytic, photocatalytic and piezo-/photocatalytic performance.

Switchable Stimuli-Responsive Heterogeneous Catalysis

Heterogeneous catalytic systems based on the use of stimuli-responsive materials can be switched from an “on” active state to an “off” inactive state, which contributes to endowing the catalysts with unique functional properties, such as adaptability, recyclability and precise spatial and temporal control on different types of chemical reactions. All these properties constitute a step toward the development of nature-inspired catalytic systems. Even if this is a niche area in the field of catalysis, it is possible to find in literature intriguing examples of dynamic catalysts, whose systematic analysis and review are still lacking. The aim of this work is to examine the recent developments of stimuli-responsive heterogeneous catalytic systems from the viewpoint of different approaches that have been proposed to obtain a dynamic control of catalytic efficiency. Because of the variety of reactions and conditions, it is difficult to make a quantitative comparison between the efficiencies of the considered systems, but the analysis of the different strategies can inspire the preparation of new smart catalytic systems.

High-efficiency and mechano-/photo- bi-catalysis of piezoelectric-ZnO@ photoelectric-TiO2 core-shell nanofibers for dye decomposition

A mechano-/photo- bi-catalyst of piezoelectric-ZnO@photoelectric-TiO₂ core-shell nanofibers was hydrothermally synthesized for Methyl Orange (10 mg L^-1) decomposition. The mechano-/photo- bi-catalysis in ZnO@TiO₂ is superior to mechano- or photo-catalysis in decomposing Methyl Orange, which is mainly attributed to the synergy effect of the piezoelectric-ZnO core's mechano-catalysis and the thin photoelectric TiO₂ shell's photo-catalysis. The heterostructure of the piezoelectric-ZnO@photoelectric-TiO₂ core-shell interface, being helpful to reduce electron-hole pair recombination and to separate the piezoelectrically-/photoelectric ally- induced electrons and holes, may also make a great contribution to the enhanced catalysis performance. The mechano-/photo-bi-catalysis in ZnO@TiO₂ core-shell nanofibers possesses the advantages of high efficiency, non-toxicity and tractability and is potential in utilizing mechanical/solar energy to deal with dye wastewater.