Monitoring transient changes in the structure of water at a polarised liquid-liquid interface using electrocapillary curves

Mechanistic Insights into the Potentiodynamic Electrosynthesis of PEDOT Thin Films at a Polarizable Liquid|Liquid Interface

Conducting polymer (CP) thin films find widespread use, for example in bioelectronic, energy harvesting and storage, and drug delivery technology. Electrosynthesis at a polarizable liquid|liquid interface using an aqueous oxidant and organic soluble monomer provides a route to free-standing and scalable CP thin films, such as poly(3,4-ethylenedioxythiophene) (PEDOT), in a single step at ambient conditions. Here, using the potentiodynamic technique of cyclic voltammetry, interfacial electrosynthesis involving ion exchange, electron transfer, and proton adsorption charge transfer processes is shown to be mechanistically distinct from CP electropolymerization at a solid electrode|electrolyte interface. During interfacial electrosynthesis, the applied interfacial Galvani potential difference controls the interfacial concentration of the oxidant, but not the CP redox state. Nevertheless, typical CP electropolymerization electrochemical behaviors, such as steady charge accumulation with each successive cycle and the appearance of a nucleation loop, were observed. By combining (spectro)electrochemical measurements and theoretical models, this work identifies the underlying mechanistic origin of each feature on the cyclic voltammograms (CVs) due to charge accumulated from Faradaic and capacitive processes as the PEDOT thin film grows. To prevent overoxidation during interfacial electrosynthesis with a powerful cerium aqueous oxidant, scan rates in excess 25 mV·s-1 were optimal. The experimental methodology and theoretical models outlined in this article provide a broadly generic framework to understand evolving CVs during interfacial electrosynthesis using any suitable oxidant/monomer combination.

Simultaneous electro-generation/polymerization of Cu nanocluster embedded conductive poly(2,2':5',2''-terthiophene) films at micro and macro liquid/liquid interfaces

Cu nanoparticles (NPs) have been shown to be excellent electrocatalysts, particularly for CO₂ reduction - a critical reaction for sequestering anthropogenic, atmospheric carbon. Herein, the micro interface between two immiscible electrolyte solutions (ITIES) is exploited for the simultaneous electropolymerization of 2,2':5',2''-terthiophene (TT) and reduction of Cu²⁺ to Cu nanoparticles (NPs) generating a flexible electrocatalytic composite electrode material. TT acts as an electron donor in 1,2-dichloroethane (DCE) through heterogeneous electron transfer across the water|DCE (w|DCE) interface to CuSO₄ dissolved in water. The nanocomposite formation process was probed using cyclic voltammetry as well as electrochemical impedance spectroscopy (EIS). CV and EIS data show that the film forms quickly; however, the interfacial reaction is not spontaneous and does not proceed without an applied potential. At high [TT] the heterogeneous electron transfer wave was recorded voltammetrically but not at low [TT]. However, probing the edge of the polarizable potential window was found to be sufficient to initiate electrogeneration/electropolymerization. SEM and TEM were used to image and analyze the final Cu NP/poly-TT composites and it was discovered that there is a concomitant decrease in NP size with increasing [TT]. Preliminary electrocatalysis results at a nanocomposite modified large glassy carbon electrode saw a > 2 × increase in CO₂ reduction currents versus an unmodified electrode. These data suggest that this strategy is a promising means of generating electrocatalytic materials for carbon capture. However, films electrosynthesized at a micro and ~ 1 mm ITIES demonstrated poor reusability.

Electrosynthesis of Biocompatible Free-Standing PEDOT Thin Films at a Polarized Liquid|Liquid Interface

Conducting polymers (CPs) find applications in energy conversion and storage, sensors, and biomedical technologies once processed into thin films. Hydrophobic CPs, like poly(3,4-ethylenedioxythiophene) (PEDOT), typically require surfactant additives, such as poly(styrenesulfonate) (PSS), to aid their aqueous processability as thin films. However, excess PSS diminishes CP electrochemical performance, biocompatibility, and device stability. Here, we report the electrosynthesis of PEDOT thin films at a polarized liquid|liquid interface, a method nonreliant on conductive solid substrates that produces free-standing, additive-free, biocompatible, easily transferrable, and scalable 2D PEDOT thin films of any shape or size in a single step at ambient conditions. Electrochemical control of thin film nucleation and growth at the polarized liquid|liquid interface allows control over the morphology, transitioning from 2D (flat on both sides with a thickness of <50 nm) to “Janus” 3D (with flat and rough sides, each showing distinct physical properties, and a thickness of >850 nm) films. The PEDOT thin films were p-doped (approaching the theoretical limit), showed high π–π conjugation, were processed directly as thin films without insulating PSS and were thus highly conductive without post-processing. This work demonstrates that interfacial electrosynthesis directly produces PEDOT thin films with distinctive molecular architectures inaccessible in bulk solution or at solid electrode–electrolyte interfaces and emergent properties that facilitate technological advances. In this regard, we demonstrate the PEDOT thin film’s superior biocompatibility as scaffolds for cellular growth, opening immediate applications in organic electrochemical transistor (OECT) devices for monitoring cell behavior over extended time periods, bioscaffolds, and medical devices, without needing physiologically unstable and poorly biocompatible PSS.

Interfacial Synthesis: Morphology, Structure, and Properties of Interfacial Formations in Liquid–Liquid Systems

Abstract

The results of studies in the field of interfacial synthesis and interfacial formations in liquid–liquid systems are summarized. The mechanisms of the processes of interfacial synthesis are considered. Data on the self-assembly of nanoparticles, films, and 3D materials are given. The properties of materials of interfacial formations in systems with rare-earth elements and di(2-ethylhexyl)phosphoric acid, obtained both in the presence and absence of local vibrations, are described. It was established that materials obtained in the presence of local vibrations in the interfacial layer have higher density, melting point, and magnetic susceptibility and lower electric conductivity. The effect of force field parameters on the properties of interfacial formations is considered. Practical applications and prospects for research in the field of interfacial formations are discussed.