Synthesis of polymer gel electrolyte with high molecular weight poly(methyl methacrylate)–clay nanocomposite

Two-Dimensional Zeolitic Imidazolate Framework ZIF-L: A Promising Catalyst for Polymerization

Here, for the first time, a 2D and leaf-like zeolitic imidazolate framework (ZIF-L) is reported for the synthesis of ultrahigh molecular weight (UHMW) poly(methyl methacrylate) (PMMA) with Mn up to 1390 kg mol−1. This synthesis method is a one-step process without any co-catalyst in a solvent-free medium. SEM, PXRD, FT-IR, TGA, and nitrogen sorption measurements confirmed the 2D and leaf-like structure of ZIF-L. The results of PXRD, SEM, TGA demonstrate that the catalyst ZIF-L is remarkably stable even after a long-time polymerization reaction. Zwitterionic Lewis pair polymerization (LPP) has been proposed for the catalytic performance of ZIF-L on methyl methacrylate (MMA) polymerization. This MMA polymerization is consistent with a living system, where ZIF-L could reinitiate the polymerization and propagates the process by gradually growing the polymer chains.

A Novel Gel Polymer Electrolyte by Thiol-Ene Click Reaction Derived from CO2-Based Polycarbonate for Lithium-Ion Batteries

Here, we describe the synthesis of a CO2-based polycarbonate with pendent alkene groups and its functionalization by grafting methoxypolyethylene glycol in view of its application possibility in gel polymer electrolyte lithium-ion batteries. The gel polymer electrolyte is prepared by an in-situ thiol-ene click reaction between polycarbonate with pendent alkene groups and thiolated methoxypolyethylene glycol in liquid lithium hexafluorophosphate electrolyte and exhibits conductivity as remarkably high as 2.0×10−2 S cm−1 at ambient temperature. To the best of our knowledge, this gel polymer electrolyte possesses the highest conductivity in all relevant literatures. A free-standing composite gel polymer electrolyte membrane is obtained by incorporating the gel polymer electrolyte with electrospun polyvinylidene fluoride as a skeleton. The as-prepared composite membrane is used to assemble a prototype lithium iron phosphate cell and evaluated accordingly. The battery delivers a good reversible charge-discharge capacity close to 140 mAh g-1 at 1 C rate and 25°C with only 0.022% per cycle decay after 200 cycles. This work provides an interesting molecular design for polycarbonate application in gel electrolyte lithium-ion batteries.

A chemically bonded supercapacitor using a highly stretchable and adhesive gel polymer electrolyte based on an ionic liquid and epoxy-triblock diamine network

Despite significant advances in the development of flexible gel polymer electrolytes (GPEs), there are still problems to be addressed to apply them to flexible electric double layer capacitors (EDLCs), including interfacial interactions between the electrolyte and electrode under deformation. Previously reported EDLCs using GPEs have laminated structures with weak interfacial interactions between the electrode and electrolyte, leading to fragility upon elongation and low power density due to lower utilization of the surface area of the carbon material in the electrode. To overcome these problems, we present a new strategy for constructing an epoxy-based GPE that can provide strong adhesion between electrode and electrolyte. The GPE is synthesized by polymerization of epoxy and an ionic liquid. This GPE shows high flexibility up to 509% and excellent adhesive properties that enable strong chemical bonding between the electrode and electrolyte. Moreover, the GPE is stable at high voltage and high temperature with high ionic conductivity of ∼10⁻³ S cm⁻¹. EDLCs based on the developed GPE exhibit good compatibility between the electrode and electrolyte and work properly when deformed. The EDLCs also show a high specific capacitance of 99 F g⁻¹, energy density of 113 W h kg⁻¹, and power density of 4.5 kW g⁻¹. The excellent performance of the GPE gives it tremendous potential for use in next generation electronic devices such as wearable devices.

A chemically bonded supercapacitor using a stretchable and adhesive gel polymer electrolyte based on ionic liquid and epoxy for flexible devices.

Copper-based dye-sensitized solar cells with quasi-solid nano cellulose composite electrolytes

Compatability of copper(i) based dyes with quasi solid state electrolytes enhanced with cellulose nano crystals in DSSCs is demonstrated.