Phospholipid monolayer coated microfabricated electrodes to model the interaction of molecules with biomembranes

Membrane-Nanoparticle Interactions: The Impact of Membrane Lipids

The growing field of nanotechnology presents opportunity for applications across many sectors. Nanostructures, such as nanoparticles, hold distinct properties based on their size, shape, and chemical modifications that allow them to be utilized in both highly specific as well as broad capacities. As the classification of nanoparticles becomes more well-defined and the list of applications grows, it is imperative that their toxicity be investigated. One such cellular system that is of importance are cellular membranes (biomembranes). Membranes present one of the first points of contact for nanoparticles at the cellular level. This review will address current studies aimed at defining the biomolecular interactions of nanoparticles at the level of the cell membrane, with a specific focus of the interactions of nanoparticles with prominent lipid systems.

Rapid identification of in vitro cell toxicity using an electrochemical membrane screening platform

This study compares the performance and output of an electrochemical phospholipid membrane platform against respective in vitro cell-based toxicity testing methods using three toxicants of different biological action (chlorpromazine (CPZ), colchicine (COL) and methyl methanesulphonate (MMS)). Human cell lines from seven different tissues (lung, liver, kidney, placenta, intestine, immune system) were used to validate this physicochemical testing system. For the cell-based systems, the effective concentration at 50 % cell death (EC₅₀) values are calculated. For the membrane sensor, a limit of detection (LoD) value was extracted as a quantitative parameter describing the minimum concentration of toxicant which significantly affects the structure of the phospholipid sensor membrane layer. LoD values were found to align well with the EC₅₀ values when acute cell viability was used as an end-point and showed a similar toxicity ranking of the tested toxicants. Using the colony forming efficiency (CFE) or DNA damage as end-point, a different order of toxicity ranking was observed. The results of this study showed that the electrochemical membrane sensor generates a parameter relating to biomembrane damage, which is the predominant factor in decreasing cell viability when in vitro models are acutely exposed to toxicants. These results lead the way to using electrochemical membrane-based sensors for rapid relevant preliminary toxicity screens.

Spectroelectrochemical Studies of CTAB Adsorbed on Gold Surfaces in Perchloric Acid

The behaviour of CTAB adsorbed on polycrystalline gold electrodes has been studied using a combination of spectroelectrochemical methods. The results indicate that the formation of the layer is the consequence of the precipitation of the CTAB micelles on the electrode surface as bromide ions, which stabilize the micelles, are replaced by perchlorate anions. This process leads to the formation of CTA⁺ layers in which perchlorate ions are intercalated, in which the adlayer suffers a continuous rearrangement that leads to the formation of micro-dominions of different types of hydrogen-bonded water populations throughout the adlayer. After prolonged cycling, a stable situation is reached. Under these conditions, water molecules permeate through the adlayer toward the electrode surface at potentials positive of the potential of zero charge, due to the repulsion between the CTA⁺ layer and the positive charge of the electrode.

Heterogeneous Rate Constant for Amorphous Silica Nanoparticle Adsorption on Phospholipid Monolayers

The interaction of amorphous silica nanoparticles with phospholipid monolayers and bilayers has received a great deal of interest in recent years and is of importance for assessing potential cellular toxicity of such species, whether natural or synthesized for the purpose of nanomedical drug delivery and other applications. This present communication studies the rate of silica nanoparticle adsorption on to phospholipid monolayers in order to extract a heterogeneous rate constant from the data. This rate constant relates to the initial rate of growth of an adsorbed layer of nanoparticles as SiO2 on a unit area of the monolayer surface from unit concentration in dispersion. Experiments were carried out using the system of dioleoyl phosphatidylcholine (DOPC) monolayers deposited on Pt/Hg electrodes in a flow cell. Additional studies were carried out on the interaction of soluble silica with these layers. Results show that the rate constant is effectively constant with respect to silica nanoparticle size. This is interpreted as indicating that the interaction of hydrated SiO2 molecular species with phospholipid polar groups is the molecular initiating event (MIE) defined as the initial interaction of the silica particle surface with the phospholipid layer surface promoting the adsorption of silica nanoparticles on DOPC. The conclusion is consistent with the observed significant interaction of soluble SiO2 with the DOPC layer and the established properties of the silica-water interface.

Tuning stable noble metal nanoparticles dispersions to moderate their interaction with model membranes

HYPOTHESIS

The properties of stable gold (Au) nanoparticle dispersions can be tuned to alter their activity towards biomembrane models.

EXPERIMENTS

Au nanoparticle coating techniques together with rapid electrochemical screens of a phospholipid layer on fabricated mercury (Hg) on platinum (Pt) electrode have been used to moderate the phospholipid layer activity of Au nanoparticle dispersions. Screening results for Au nanoparticle dispersions were intercalibrated with phospholipid large unilamellar vesicle (LUV) interactions using a carboxyfluorescein (CF) leakage assay. All nanoparticle dispersions were characterised for size, by dynamic light scattering (DLS) and transmission electron microscopy (TEM).

FINDINGS

Commercial and high quality home synthesised Au nanoparticle dispersions are phospholipid monolayer active whereas Ag nanoparticle dispersions are not. If Au nanoparticles are coated with a thin layer of Ag then the particle/lipid interaction is suppressed. The electrochemical assays of the lipid layer activity of Au nanoparticle dispersions align with LUV leakage assays of the same. Au nanoparticles of decreasing size and increasing dispersion concentration showed a stronger phospholipid monolayer/bilayer interaction. Treating Au nanoparticles with cell culture medium and incubation of Au nanoparticle dispersions in phosphate buffered saline (PBS) solutions removes their phospholipid layer interaction.

High-throughput electrochemical sensing platform for screening nanomaterial-biomembrane interactions

A high-throughput, automated screening platform has been developed for the assessment of biological membrane damage caused by nanomaterials. Membrane damage is detected using the technique of analyzing capacitance-current peak changes obtained through rapid cyclic voltammetry measurements of a phospholipid self-assembled monolayer formed on a mercury film deposited onto a microfabricated platinum electrode after the interaction of a biomembrane-active species. To significantly improve wider usability of the screening technique, a compact, high-throughput screening platform was designed, integrating the monolayer-supporting microfabricated electrode into a microfluidic flow cell, with bespoke pumps used for precise, automated control of fluid flow. Chlorpromazine, a tricyclic antidepressant, and a citrate-coated 50 nm diameter gold nanomaterial (AuNM) were screened to successfully demonstrate the platform's viability for high-throughput screening. Chlorpromazine and the AuNM showed interactions with a 1,2-dioleoyl-sn-glycero-3-phosphocholine (DOPC) monolayer at concentrations in excess of 1 µmol dm^-3. Biological validity of the electrochemically measured interaction of chlorpromazine with DOPC monolayers was confirmed through quantitative comparisons with HepG2 and A549 cytotoxicity assays. The platform also demonstrated desirable performance for high-throughput screening, with membrane interactions detected in <6 min per assay. Automation contributed to this significantly by reducing the required operating skill level when using the technique and minimizing fluid consumption.

Hg-supported phospholipid monolayer as rapid screening device for low molecular weight narcotic compounds in water

This study positions the fabricated Pt/Hg-supported phospholipid sensor element in the context of more conventional biomembrane-based screening platforms. The technology has been used together with immobilised artificial membrane (IAM) chromatography and COSMOmic simulation methods to screen the interaction of a series of low molecular weight narcotic organic compounds in water with phosphatidylcholine (PC) membranes. For these chemicals it is shown that toxicity to aquatic species is related to compound hydrophobicity which is associated with compound accumulation in the phospholipid membrane as modelled by IAM chromatography measurements and COSMOmic simulations. In contrast, the Hg-supported dioleoyl phosphatidylcholine (DOPC) sensor element records membrane damage/modification which is indirectly related to general toxicity and directly related to compound structure. Electrochemical limit of detection (LoD) values depend on molecular structure and range from 20 μmolL^-1 for substituted phenols to 23 mmolL^-1 for aliphatics. Rapid cyclic voltammetry (RCV) "fingerprints" showed that the major structural classes of compounds: alkyl/chlorobenzenes, substituted phenols, quaternary ammonium compounds and neutral amines interacted distinctively with the DOPC on Hg and that these observations correlated with and supported those predicted by the COSMOmic simulations of the compound/DMPC association. In addition, the compatibility of the electrochemical and COSMOmic methods validates the electrochemical device as a meaningful high throughput technology to screen compounds in water and report on the mechanistic details of their interaction with phospholipid layers.

Impact of Electric Fields on the Nanoscale Behavior of Lipid Monolayers at the Surface of Graphite in Solution

The nanoscale organization and dynamics of lipid molecules in self-assembled membranes is central to the biological function of cells and in the technological development of synthetic lipid structures as well as in devices such as biosensors. Here, we explore the nanoscale molecular arrangement and dynamics of lipids assembled in monolayers at the surface of highly ordered pyrolytic graphite (HOPG), in different ionic solutions, and under electrical potentials. Using a combination of atomic force microscopy and fluorescence recovery after photobleaching, we show that HOPG is able to support fully formed and fluid lipid membranes, but mesoscale order and corrugations can be observed depending on the type of the lipid considered (1,2-dioleoyl- sn-glycero-3-phosphocholine, 1,2-dioleoyl- sn-glycero-3-phospho-l-serine (DOPS), and 1,2-dioleoyl-3-trimethylammoniumpropane) and the ion present (Na⁺, Ca²⁺, Cl^-). Interfacial solvation forces and ion-specific effects dominate over the electrostatic changes induced by moderate electric fields (±1.0 V vs Ag/AgCl reference electrode) with particularly marked effects in the presence of calcium, and for DOPS. Our results provide insights into the interplay between the molecular, ionic, and electrostatic interactions and the formation of dynamical ordered structures in fluid lipid membranes.

Copper-phospholipid interaction at cell membrane model hydrophobic surfaces

Detailed investigation of Cu (II) binding with natural lipid phosphatidylglycerol (PG) in aqueous solution was carried out by voltammetric measurements at the mercury drop electrode, complemented by monolayer studies in a Langmuir trough and electrophoretic measurements, all used as models for hydrophobic cell membranes. Penetration of copper ions into the PG layer was facilitated by the formation of hydrophilic Cu-Phenanthroline (Phen) complex in the subphase, followed by the mixed ligand Cu-Phen-PG complex formation at the hydrophobic interface. Electrophoretic measurements indicated a comparatively low abundance of the formed mixed ligand complex within the PG vesicles, resulting it the zeta potential change of +0.83mV, while monolayer studies confirmed their co-existence at the interface. The Cu-Phen-PG complex was identified in the pH range from 6 to 9. The stoichiometry of the complex ([PhenCuOHPG]), as well as its stability and kinetics of formation, were determined at the mercury drop electrode. Cu-Phen-PG reduces quasireversibly at about -0.7V vs. Ag/AgCl including reactant adsorption, followed by irreversible mixed complex dissociation, indicating a two-electron transfer - chemical reaction (EC mechanism). Consequently, the surface concentration (γ) of the adsorbed [PhenCuOHPG] complex at the hydrophobic electrode surface was calculated to be (3.35±0.67)×10^-11molcm^-2. Information on the mechanism of Cu (II) - lipid complex formation is a significant contribution to the understanding of complex processes at natural cell membranes.

Experimental Modeling of Flavonoid-Biomembrane Interactions

Nonspecific interactions of flavonoids with lipids can alter the membrane's features (e.g., thickness and fluctuations) as well as influence their therapeutic potentials. However, relatively little is known about the details of how flavonoids interact with lipid components. Structure-dependent interactions of a variety of flavonoids with phospholipid monolayers on a mercury (Hg) film electrode were established by rapid cyclic voltammetry (RCV). The data revealed that flavonoids adopting a planar configuration altered the membrane properties more significantly than nonplanar flavonoids. Quercetin, rutin, and tiliroside were selected for follow-up experiments with Langmuir monolayers, Brewster angle microscopy (BAM), and small-angle X-ray scattering (SAXS). Relaxation phenomena in DOPC monolayers and visualization of the surface with BAM revealed a pronounced monolayer stabilization effect with both quercetin and tiliroside, whereas rutin disrupted the monolayer structure rendering the surface entirely smooth. SAXS showed a monotonous membrane thinning for all compounds studied associated with an increase in the mean fluctuations of the membrane. Rutin, quercetin, and tiliroside decreased the bilayer thickness of DOPC by ∼0.45, 0.8, and 1.1 Å at 6 mol %, respectively. In addition to the novelty of using lipid monolayers to systematically characterize the structure-activity relationship (SAR) of a variety of flavonoids, this is the first report investigating the effect of tiliroside with biomimetic membrane models. All the flavonoids studied are believed to be localized in the lipid/water interface region. Both this localization and the membrane perturbations have implications for their therapeutic activity.

Direct characterization of fluid lipid assemblies on mercury in electric fields

Phospholipid monolayers on mercury (Hg) surfaces have received substantial and extensive scientific interest not only because of their use as a biomembrane model but also for their application as a successful toxicity-sensing element. The monolayers show characteristic and very reproducible phase transitions manifest as consecutive voltammetric peaks in response to applied transverse electric fields. Unfortunately, apart from the results of simulation studies, there is a lack of data on the lipid phase structures to help interpret these voltammetric peaks. In this paper we report on the direct measurement of the structural changes underlying the phase transitions of phospholipid layers of dioleoyl phosphatidylcholine (DOPC) at electrified Hg surfaces using atomic force microscopy force-distance techniques. These direct measurements enable a description of the following structural changes in fluid lipid assemblies on a liquid electrode within an increasing transverse electric field. At about -1.0 V (vs Ag/AgCl) a field-facilitated ingress of ions and water into the monolayer results in a phase transition to a structured 2D emulsion. This is followed by a further phase transition at more negative potentials involving the readsorption of bilayer patches. At stronger values of field the bilayer patches form semivesicles, which subsequently collapse to form a monolayer of uncertain composition at very negative potentials. The observation that a monolayer on Hg converts to a bilayer by increasing the applied potential has allowed techniques to be developed for preparing and characterizing a near-continuous DOPC bilayer on Hg in an applied potential window within -1.0 and -1.4 V (vs Ag/AgCl).

Mercury-supported biomimetic membranes for the investigation of antimicrobial peptides

Tethered bilayer lipid membranes (tBLMs) consist of a lipid bilayer interposed between an aqueous solution and a hydrophilic "spacer" anchored to a gold or mercury electrode. There is great potential for application of these biomimetic membranes for the elucidation of structure-function relationships of membrane peptides and proteins. A drawback in the use of mercury-supported tBLMs with respect to gold-supported ones is represented by the difficulty in applying surface sensitive, spectroscopic and scanning probe microscopic techniques to gather information on the architecture of these biomimetic membranes. Nonetheless, mercury-supported tBLMs are definitely superior to gold-supported biomimetic membranes for the investigation of the function of membrane peptides and proteins, thanks to a fluidity and lipid lateral mobility comparable with those of bilayer lipid membranes interposed between two aqueous phases (BLMs), but with a much higher robustness and resistance to electric fields. The different features of mercury-supported tBLMs reconstituted with functionally active membrane proteins and peptides of bacteriological or pharmacological interest may be disclosed by a judicious choice of the most appropriate electrochemical techniques. We will describe the way in which electrochemical impedance spectroscopy, potential-step chronocoulometry, cyclic voltammetry and phase-sensitive AC voltammetry are conveniently employed to investigate the structure of mercury-supported tBLMs and the mode of interaction of antimicrobial peptides reconstituted into them.

Interaction of imidazolium-based room-temperature ionic liquids with DOPC phospholipid monolayers: electrochemical study

To test the biocompatible character of room-temperature ionic liquids (ILs), the interaction of various ILs with biological membrane (biomembrane) models was studied in this work. Dioleoyl phosphatidylcholine (DOPC) adsorbed on a mercury (Hg) electrode forms an impermeable defect-free monolayer which is a well established biomembrane model, prone to be studied by electrochemical techniques. We have monitored the modifications of the Hg supported monolayer caused by ILs using rapid cyclic voltammetry (RCV), alternating current voltammetry (ACV), and electrochemical impedance spectroscopy (EIS). A series of imidazolium-based ILs were investigated whose interaction highlighted the role of anion and lateral side chain of cation during the interaction with DOPC monolayers. It was shown that the hydrophobic and lipophilic character of the IL cations is a primary factor responsible for this interaction. Hg-supported monolayers provide an accurate analysis of the behavior of ILs at the interface of a biomembrane leading to a comprehensive understanding of the interaction mechanisms involved. At the same time, these experiments show that the Hg-phospholipid model is an effective toxicity sensing technique as shown by the correlation between literature in vivo toxicity data and the data from this study.

Flow cell design for effective biosensing

The efficiency of three different biosensor flow cells is reported. All three flow cells featured a central channel that expands in the vicinity of the sensing element to provide the same diameter active region, but the rate of channel expansion and contraction varied between the designs. For each cell the rate at which the analyte concentration in the sensor chamber responds to a change in the influent analyte concentration was determined numerically using a finite element model and experimentally using a flow-fluorescence technique. Reduced flow cell efficiency with increasing flow rates was observed for all three designs and was related to the increased importance of diffusion relative to advection, with efficiency being limited by the development of regions of recirculating flow (eddies). However, the onset of eddy development occurred at higher flow rates for the design with the most gradual channel expansion, producing a considerably more efficient flow cell across the range of flow rates considered in this study. It is recommended that biosensor flow cells be designed to minimize the tendency towards, and be operated under conditions that prevent the development of flow recirculation.

Freezing or wrapping: the role of particle size in the mechanism of nanoparticle-biomembrane interaction

Understanding the interactions between nanoparticles (NPs) and biological matter is a high-priority research area because of the importance of elucidating the physical mechanisms underlying the interactions leading to NP potential toxicity as well as NP viability as therapeutic vectors in nanomedicine. Here, we use two model membrane systems, giant unilamellar vesicles (GUVs) and supported monolayers, to demonstrate the competition between adhesion and elastic energy at the nanobio interface, leading to different mechanisms of NP-membrane interaction relating to NP size. Small NPs (18 nm) cause a "freeze effect" of otherwise fluid phospholipids, significantly decreasing the phospholipid lateral mobility. The release of tension through stress-induced fracture mechanics results in a single microsize hole in the GUVs after interaction. Large particles (>78 nm) promote membrane wrapping, which leads to increased lipid lateral mobility and the eventual collapse of the vesicles. Electrochemical impedance spectroscopy on the supported monolayer model confirms that differently sized NPs interact differently with the phospholipids in close proximity to the electrode during the lipid desorption process. The time scale of these processes is in accordance with the proposed NP/GUV interaction mechanism.

Electrochemical modeling of the silica nanoparticle-biomembrane interaction

The interaction of amorphous colloidal silica (SiO(2)) nanoparticles of well-defined sizes with a dioleoyl phosphatidylcholine (DOPC) monolayer on a mercury (Hg) film electrode has been investigated. It was shown using electrochemical methods and microcalorimetry that particles interact with the monolayer, and the electrochemical data shows that the extent of interaction is inversely proportional to the particle size. Scanning electron microscopy (SEM) images of the electrode-supported monolayers following exposure to the particles shows that the nanoparticles bind to the DOPC monolayer irrespective of their size, forming a particle monolayer on the DOPC surface. A one-parameter model was developed to describe the electrochemical results where the fitted parameter is an interfacial layer thickness (3.2 nm). The model is based on the adsorptive interactions operating within this interfacial layer that are independent of the solution pH and solution ionic strength. The evidence implies that the most significant forces determining the interactions are van der Waals in character.

The effects of substituent grafting on the interaction of pH-responsive polymers with phospholipid monolayers

pH-responsive amphiphilic polymers with suitable graftings have demonstrated highly efficient cell membrane activity and hence are promising applicants for drug-delivery. Grafting the hydrophobic amino acid l-phenylalanine and the hydrophilic methoxy poly(ethylene glycol) amine onto the pendant carboxylic acid moieties of a linear polyamide, poly(l-lysine isophthalamide), can effectively modify the amphiphilicity and conformation of the amphiphilic polymers. Here, the interactions of these polymers with phospholipid monolayers adsorbed on mercury (Hg) electrodes have been studied. AC voltammetry (ACV), rapid cyclic voltammetry (RCV), and electrochemical impedance spectroscopy (EIS) have been applied to monitor phospholipid monolayer associations with different polymer concentrations under different pH values. The polymers interact reversibly with the monolayer shown by altering the monolayer capacitance and inhibiting the phospholipid reorientation in electric field. Polymer grafting enhances the pH-mediated conformational change of the polymers which in turn increases their phospholipid monolayer activity. The most significant monolayer interactions have been observed with the polymer grafted with hydrophobic l-phenylalanine. A low level of PEGylation of the backbone also increases the monolayer activity. The polymer/DOPC interactions have been represented with an impedance model, which takes account of the interaction giving rise to an increase in monolayer capacitance and inhomogeneity and a Debye type dielectric relaxation. The extent of penetration of the polymers into the monolayer is inversely related to the electrical resistance they give rise to during the Debye relaxation. The cell membrane activities of these amphiphilic polymers have been successfully mirrored in this supported DOPC monolayer system, isolating the key parameters for biomembrane activities and giving insight into the mechanism of the interactions. The conclusions from this study provide strategic directions in material design catering to different requirements in biomedical applications.

Tethered bilayer lipid micromembranes for single-channel recording: the role of adsorbed and partially fused lipid vesicles

A mercury-supported bilayer lipid micromembrane was prepared by anchoring a thiolipid monolayer to a mercury cap electrodeposited on a platinum microdisc about 20 μm in diameter; a lipid monolayer was then self-assembled on top of the thiolipid monolayer either by vesicle fusion or by spilling a few drops of a lipid solution in chloroform on the cap and allowing the solvent to evaporate. Single-channel recording following incorporation of the alamethicin channel-forming peptide exhibits quite different features, depending on the procedure followed to form the distal lipid monolayer. The "spilling" procedure, which avoids the formation of adsorbed or partially fused vesicles, yields very sharp single-channel currents lasting only one or two milliseconds. These are ascribed to ionic flux into the hydrophilic spacer moiety of the thiolipid. Conversely, the vesicle-fusion procedure yields much longer single-channel openings analogous to those obtained with conventional bilayer lipid membranes, albeit smaller. This difference in behavior is explained by ascribing the latter single-channel currents to ionic flux into vesicles adsorbed and/or partially fused onto the tethered lipid bilayer, via capacitive coupling.

Building biomimetic membrane at a gold electrode surface

This article describes efforts to build a model biological membrane at a surface of a gold electrode. In this architecture, the membrane may be exposed to static electric fields on the order of 10(7) to 10(8) V m(-1). These fields are comparable in magnitude to the static electric field acting on a natural biological membrane. The field may be conveniently used to manipulate organic molecules within the membrane. By turning a knob on the control instrument one can deposit or lift the membrane from the gold surface. Electrochemical techniques can be used to control the physical state of the film while the infrared reflection absorption spectroscopy (IRRAS), surface imaging by STM and AFM and neutron scattering techniques can be employed to study conformational changes of organic molecules and their ordering within the membrane. This is shown on examples of membranes built of a simple zwitterionic phospholipid such as 1,2-dimyristoyl-sn-glycero-3-phosphatidylcholine (DMPC) and a mixed membrane composed of DMPC and cholesterol. The results illustrate the tremendous effect of cholesterol on the membrane structure. Two methods of membrane deposition at the electrode surface, namely by unilamellar vesicles fusion and using the Langmuir-Blodgett technique, are compared. Applications of these model systems to study interactions of small antibiotic peptides with lipids are discussed.

From DC polarographic presodium wave of proteins to electrochemistry of biomacromolecules

History of electrochemistry of proteins and nucleic acids is briefly reviewed. The ability of proteins to catalyze hydrogen evolution at Hg electrodes was discovered almost 80 years ago in J. Heyrovský’s laboratory. This phenomenon was not sufficiently appreciated for several decades. Recently it has been shown that using constant current chronopotentiometric stripping (CPS) with hanging mercury drop, solid amalgam or Hg-film electrodes the CPS peak H is obtained with nanomolar concentrations of peptides and proteins. This peak is derived from the presodium wave but it has some new properties useful in protein research. It is sensitive to changes in protein structures and to protein redox states, representing a new tool for protein analysis applicable in biomedicine. Electroactivity of nucleic acids was discovered about 50 years ago. Electrochemistry of DNA and RNA is now a booming field because of its potential use in sensors for DNA hybridization and DNA damage. Quite recently it has been shown that electrochemistry can be applied also in polysaccharide analysis. A review with 99 references.

A metal-supported biomimetic micromembrane allowing the recording of single-channel activity and of impedance spectra of membrane proteins

A novel tethered bilayer lipid micromembrane (tBLmicroM) was prepared and characterized. It consists of a mercury cap electrodeposited on a platinum microelectrode, about 20 microm in diameter. The micromembrane was prepared by tethering to the mercury cap a thiolipid monolayer and by then self-assembling a lipid monolayer on top of it. The thiolipid consisted of a disulfidated tetraoxyethylene hydrophilic spacer covalently linked to two phytanyl chains. Upon incorporating OmpF porin in the tBLmicroM, its single-channel activity was recorded by the patch-clamp technique, and its particular features described. An electrochemical impedance spectrum of the tBLmicroM incorporating OmpF porin is also reported. To the best of our knowledge, this tBLmicroM is the first metal-supported biomimetic micromembrane capable of incorporating non-engineered channel proteins in a functionally active state from their detergent solutions, and of allowing the recording of single-channel activity and of impedance spectra of these proteins via ion translocation into the hydrophilic spacer. The limited spaciousness of the spacer prevents a statistical analysis based on current-amplitude or blockage-time histograms. Nonetheless, the robustness, stability, ease of preparation and disposability of the present tBLmicroM may open the way to the realization of a channel-protein microarray platform allowing a high throughput drug screening.