Visualization of local degradation processes in coated metals by means of scanning electrochemical microscopy in the redox competition mode

Uses of Scanning Electrochemical Microscopy (SECM) for the Characterization with Spatial and Chemical Resolution of Thin Surface Layers and Coating Systems Applied on Metals: A Review

Scanning Electrochemical Microscopy (SECM) is increasingly used in the study and characterization of thin surface films as well as organic and inorganic coatings applied on metals for the collection of spatially- and chemically-resolved information on the localized reactions related to material degradation processes. The movement of a microelectrode (ME) in close proximity to the interface under study allows the application of various experimental procedures that can be classified into amperometric and potentiometric operations depending on either sensing faradaic currents or concentration distributions resulting from the corrosion process. Quantitative analysis can be performed using the ME signal, thus revealing different sample properties and/or the influence of the environment and experimental variables that can be observed on different length scales. In this way, identification of the earlier stages for localized corrosion initiation, the adsorption and formation of inhibitor layers, monitoring of water and specific ions uptake by intact polymeric coatings applied on metals for corrosion protection as well as lixiviation, and detection of coating swelling—which constitutes the earlier stages of blistering—have been successfully achieved. Unfortunately, despite these successful applications of SECM for the characterization of surface layers and coating systems applied on metallic materials, we often find in the scientific literature insufficient or even inadequate description of experimental conditions related to the reliability and reproducibility of SECM data for validation. This review focuses specifically on these features as a continuation of a previous review describing the applications of SECM in this field.

Nano‐silica/chitosan composite coatings on biodegradable magnesium alloys for enhanced corrosion resistance in simulated body fluid

Chitosan (CTS) coatings have been studied as a biocompatible coating on biodegradable magnesium (Mg) alloys to improve the corrosion resistance and bioactivity for medical implants. However, the loose structure of the CTS coating cannot provide ideal long‐time corrosion resistance in the physiological environment. In this study, a nano‐SiO2/CTS composite coating was applied on an Mg alloy substrate using the sol–gel method. The surface characteristics of the samples were examined by Fourier‐transform infrared analysis, X‐ray diffraction, scanning electron microscopy‐energy‐dispersive spectrometry, and contact angle measurements. The particle size and suitable dispersion of the SiO2 nanoparticles inside the composite coating were confirmed by transmission electron microscopy. Further, the corrosion protection behavior of the coatings was examined in a simulated body fluid using potentiodynamic polarization, electrochemical impedance spectroscopy, and scanning electrochemical microscopy analyses. Atomic force microscopy was used to determine the surface morphologies of the samples after the polarization test. The surface characteristics, electrochemical measurements, and immersion test revealed that the SiO2 nanoparticles effectively filled the voids of the CTS coating and significantly improved the corrosion resistance. The optimal concentration of nano‐SiO2 is 1.0 g/L.

Evaluation of the corrosion behavior of AZ31 magnesium alloy with different protein concentrations

Purpose

The purpose of this paper is to study systematically the corrosion behavior of AZ31 magnesium (Mg) alloy with different concentrations of bovine serum albumin (BSA) (0, 0.5, 1.0, 1.5, 2.0 and 5.0 g/L).

Design/methodology/approach

Electrochemical impedance spectroscopy and potential dynamic polarization tests were performed to obtain corrosion parameters. Scanning electrochemical microscopy (SECM) was used to analyze the local electrochemical activity of the surface film. Atomic force microscope (AFM), Scanning electron microscope-Energy dispersive spectrometer and Fourier transform infrared spectroscopy were used to determine the surface morphology and chemical composition of the surface film.

Findings

Experimental results showed the presence of BSA in a certain concentration range (0 to 2.0 g/L) has a greater inhibitory effect on the corrosion of AZ31, however, the presence of high-concentration BSA (5.0 g/L) would sharply reduce the corrosion resistance.

Originality/value

When the concentration of BSA is less than 2.0 g/L, the corrosion resistance of AZ31 enhances with the concentration. The adsorption BSA layer will come into being a physical barrier to inhibit the corrosion process. However, high-concentration BSA (5.0 g/L) will chelate with dissolved metal ions (such as Mg and Ni) to form soluble complexes, which increases the roughness of the surface and accelerates the corrosion process.

A multifunctional coating with modified calcium phosphate/chitosan for biodegradable magnesium alloys of implants

A novel CaP/CTS coating was prepared for enhanced corrosion resistance, cytocompatibility and antibacterial property of the biodegradable Mg alloys.

3D Printed and Microcontrolled: The One Hundred Dollars Scanning Electrochemical Microscope

The design and fabrication of a versatile and low-cost electrochemical-scanning probe microscope (EC-SPM) is presented. The proposed equipment relies on the use of modern prototyping tools such as 3D printers and microcontroller boards and only a few "off-the-shelf" parts to deliver a simple yet powerful EC-SPM equipment capable of performing simple space-resolved electrochemical measurements. The equipment was able to perform space-resolved electrochemical measurements using a platinum ultramicroelectrode (UME) as the working electrode on a scanning electrochemical microscopy (SECM) configuration and was used to record approach curves, line scans, and array scans over an insulating substrate. The performance of the proposed equipment was found to be adequate for simple SECM measurements under hindered diffusion conditions. Because of its flexible design (software and hardware), more complex array scan patterns, only found on high-end EC-SPM setups such as hopping mode scan, were easily implemented on the built equipment. Despite its simplicity, the versatility and low cost of the proposed design make it an attractive alternative as a teaching platform as well as a platform for developing more elaborate EC-SPM setups.

Detection of archaeological forgeries of Iberian lead plates using nanoelectrochemical techniques. The lot of fake plates from Bugarra (Spain)

Identification of forgeries is of considerable interest in studies of archaeological signariums and written Iberian artifacts, elements of capital importance for the knowledge of that culture, because there are many Iberian inscribed lead plate counterfeits circulating in the market and among many museum funds. A case study of identification of forgeries of archaeological lead using voltammetry of microparticles (VMP) and scanning electrochemical microscopy (SECM), aided by conventional optical microscopy and scanning electron microscopy (SEM/EDX) is described. The electrochemical methods are essentially non-invasive so can be applied to samples of nanoscopic size. Application to the authentication of five lead plates found in the archaeological site of Los Villaricos-Torralba (Bugarra, Spain) is described.

Redox tuning and species distribution in Maya Blue-type materials: a reassessment

Maya Blue-type specimens prepared from indigo (1 wt %) plus kaolinite, montmorillonite, palygorskite, sepiolite, and silicalite are studied. Liquid chromatography with diode array detection, ultra-performance liquid chromatography coupled with mass spectrometry, and pyrolysis-silylation gas chromatography-mass spectrometry analyses of the extracts from these specimens combined with spectral and solid-state voltammetry, electrochemical impedance spectroscopy, and scanning electrochemical microscopy techniques provide evidence for the presence of a significant amount of dehydroindigo and isatin accompanying indigo and other minority organic compounds in all samples. Solid-state electrochemistry data permits the estimatation of indigo loading in archeological Maya Blue, which is in the range of 0.2 to 1.5 wt %. These results support a view of 'genuine' Maya Blue-type materials as complex polyfunctional organic-inorganic hybrids.