Functional magnetic nanoshells integrated nanosensor for trace analysis of environmental uranium contamination

Cloud point extraction associated with differential pulse voltammetry: preconcentration and determination of trace uranyl in natural water

A procedure for the electroanalytical determination of uranyl ions pre-concentrated from natural water by cloud point extraction (CPE) is developed in this study.

Electrochemical detector based on a modified graphite electrode with phthalocyanine for the elemental analysis of actinides

The quantification of actinides in aqueous solutions involves complex and expensive separation processes. Electrochemical methods have been widely used for the quick and accurate identification and quantification of organic and inorganic compounds directly or indirectly. Therefore, this work proposes the use of modified graphite with phthalocyanine for electrochemical detection and quantification of Th, U, Pu, Am, and Cm, in aqueous media by cyclic voltammetry. The electrodes were characterized by Raman and infrared spectroscopy, and the cyclic voltammetry data were modeled with Aoki's model. The detection limits (DL) and the quantification limits (QL) reached by the electrochemical detection of these actinides were of the order of ppt. Aoki's model fitted perfectly with the experimental data. The functionalization of graphite electrodes promotes the formation of phthalic anhydride, and the phthalocyanine is anchored on the epoxy groups of the graphite. The electrochemical detection process of these actinides is indirect. This electrochemical detector is cheap and disposable and can be an alternative for an initial characterization of actinides in liquid waste.

Smart-phone, paper-based fluorescent sensor for ultra-low inorganic phosphate detection in environmental samples

A major goal of environmental agencies today is to conduct point-of-collection monitoring of excess inorganic phosphate (Pi) in environmental water samples for tracking aquatic "dead zones" caused by algae blooms. However, there are no existing commercial devices which have been miniaturized and are suitable for the point-of-need-testing ("PONT") that is required to fully map a large region, such as the Florida Everglades. To solve this challenge, a reflection-mode fluorescence-sensing apparatus was developed, leveraging an environmentally sensitive fluorophore (MDCC) bound to a bacterial phosphate-binding protein to generate a fluorescent optical signal proportional to the concentration of (Pi) present. The combined end-to-end integrated sensor system had a response time of only 4 s, with minimal effects of common interfering agents and a linear range spanning from 1.1 to 64 ppb. To support ease-of-use during PONT, the platform incorporated disposable wax-printed paper strip sample pads and a smartphone camera detection system. Since the EPA threshold is currently 30 ppb to prevent eutrophication, this system serves as a rapid test of whether a region is compliant.

A novel-green adsorbent based on betaine-modified magnetic nanoparticles for removal of methyl blue

A potential adsorbent based on betaine-modified magnetic iron oxide nanoparticles (BMNPs) was successfully synthesized by facile method, characterized and applied for methyl blue (MB) removal from aqueous solution. The characterization results of FTIR, transmission electron microscopy (TEM), X-ray diffraction (XRD) and vibrating sample magnetometer (VSM) showed that the prepared nanoparticles could be well dispersed in water and exhibited excellent superparamagnetism. These properties imply the potential to recycle BMNPs from wastewater through magnetic field. In the adsorption process, the effects of main experimental parameters such as pH of MB solution, initial concentration of MB, contact time, and adsorption capacity for MB were studied and optimized. These results demonstrated that large amounts of quaternary ammonium groups existing on the surface of BMNPs could promote absorption of MB via electrostatic forces. Additionally, the adsorption kinetics of MB was found to follow a pseudo-second-order kinetic model and the adsorption equilibrium data fitted very closely to the Langmuir adsorption isotherm model. The maximum adsorption capacity for MB was calculated to be 136mgg^-1 at room temperature. Moreover, the BMNPs showed good reusability with 73.33% MB adsorption in the 5th cycle.

Ultrasensitive electrochemical detection of UO22+ based on DNAzyme and isothermal enzyme-free amplification

A novel enzyme-free amplification biosensor for uranyl detection was developed based on UO₂²⁺-specific DNAzyme and a hybridization chain reaction.

Exonuclease III-assisted substrate fragment recycling amplification strategy for ultrasensitive detection of uranyl by a multipurpose DNAzyme

Substrate fragment cleaved by UO₂²⁺ hybridizes with SSP6 to form dsDNA, triggering substrate fragment recycling amplification by Exo III.

Electrochemical uranyl cation biosensor with DNA oligonucleotides as receptor layer

The present study aims at the further development of the uranyl oligonucleotide-based voltammetric biosensor, which takes advantage of strong interaction between UO2(2+) and phosphate DNA backbone. Herein we report the optimization of working parameters of previously elaborated electrochemical DNA biosensor. It is shown that the sensor sensitivity is highly dependent on the oligonucleotide probe length and the incubation time of sensor in a sample solution. Consequently, the highest sensitivity was obtained for 10-nucleotide sequence and 60 min incubation time. The lower detection limit towards uranyl cation for developed biosensor was 30 nM. The influence of mixed monolayers and the possibility of developing a non-calibration device were also investigated. The selectivity of the proposed biosensor was significantly improved via elimination of adenine nucleobases from the DNA probe. Moreover, the regeneration procedure was elaborated and tested to prolong the use of the same biosensor for 4 subsequent determinations of UO2(2+).

Electrochemical uranyl biosensor with DNA oligonucleotides as receptor layer

The feasibility of using gold electrodes modified with short-chain ssDNA oligonucleotides for determination of uranyl cation is examined. Interaction between UO(2)(2+) and proposed recognition layer was studied by means of voltammetric and quartz crystal microbalance measurements. It was postulated that ssDNA recognition layer functions via strong binding of UO(2)(2+) to phosphate DNA backbone. The methylene blue was used as a redox marker for analytical signal generation. Biosensor response was based on the difference in electrochemical signal before and after subjecting it to sample containing uranyl ion. The lower detection limit of 30 nmol L(-1) for UO(2)(2+) was observed for a sample incubation time of 60 min. Proposed ssDNA-modified electrodes demonstrated good selectivity towards UO(2)(2+) against common metal cations, with only Pb(2+) and Ca(2+) showing considerable interfering effect.

Pandemic Influenza Detection by Electrically Active Magnetic Nanoparticles and Surface Plasmon Resonance

Influenza A virus (FLUAV), the causative agent of influenza infection, has received extensive attention due to the recent swine-origin H1N1 pandemic. FLUAV has long been the cause of annual epidemics as well as less frequent but more severe global pandemics. Here, we describe a biosensor utilizing electrically active magnetic (EAM) polyaniline-coated nanoparticles as the transducer in an electrochemical biosensor for rapidly identifying FLUAV strains based on receptor specificity, which will be useful to monitor animal influenza infections and to characterize pandemic potential of strains that have transmitted from animals to humans. Pandemic potential requires human-to-human transmissibility, which is dependent upon FLUAV hemagglutinin (HA) specificity for host glycan receptors. Avian FLUAV preferentially bind to α2,3-linked receptors, while human FLUAV bind to α2,6-linked receptors. EAM nanoparticles were prepared by synthesizing aniline monomer around gamma iron (III) oxide (γ-Fe₂O₃) cores, yielding 25-100-nm diameter nanoparticles that were structurally characterized by transmission electron microscopy and electron diffraction. The EAM nanoparticles were coated with monoclonal antibodies specific to H5N1 (A/Vietnam/1203/04). Specificity of binding between glycans and H5 was demonstrated. The biosensor results were correlative to supporting data from a surface plasmon resonance assay that characterized HA/glycan binding and α-H5 antibody activity. This novel study applies EAM nanoparticles as the transducer in a specific, portable, easy-to-use biosensor with great potential for disease monitoring and biosecurity applications.