Tuning the microstructure and functional properties of metal nanowire arrays via deposition potential

Size-Dependent Superconducting Properties of In Nanowire Arrays

Arrays of superconducting nanowires may be useful as elements of novel nanoelectronic devices. The superconducting properties of nanowires differ significantly from the properties of bulk structures. For instance, different vortex configurations of the magnetic field have previously been predicted for nanowires with different diameters. In the present study, arrays of parallel superconducting In nanowires with the diameters of 45 nm, 200 nm, and 550 nm-the same order of magnitude as coherence length ξ-were fabricated by templated electrodeposition. Values of magnetic moment M of the samples were measured as a function of magnetic field H and temperature T in axial and transverse fields. M(H) curves for the arrays of nanowires with 45 nm and 200 nm diameters are reversible, whereas magnetization curves for the array of nanowires with 550 nm diameter have several feature points and show a significant difference between increasing and decreasing field branches. Critical fields increase with a decrease in diameter, and the thinnest nanowires exceed bulk critical fields by 20 times. The qualitative change indicates that magnetic field configurations are different in the nanowires with different diameters. Variation of M(H) slope in small fields, heat capacity, and the magnetic field penetration depth with the temperature were measured. Superconductivity in In nanowires is proven to exist above the bulk critical temperature.

Electrochemistry under confinement

Although the term 'confinement' regularly appears in electrochemical literature, elevated by continuous progression in the research of nanomaterials and nanostructures, up until today the various aspects of confinement considered in electrochemistry are rather scattered individual contributions outside the established disciplines in this field. Thanks to a number of highly original publications and the growing appreciation of confinement as an overarching link between different exciting new research strategies, 'electrochemistry under confinement' is the process of forming a research discipline of its own. To aid the development a coherent terminology and joint basic concepts, as crucial factors for this transformation, this review provides an overview on the different effects on electrochemical processes known to date that can be caused by confinement. It also suggests where boundaries to other effects, such as nano-effects could be drawn. To conceptualize the vast amount of research activities revolving around the main concepts of confinement, we define six types of confinement and select two of them to discuss the state of the art and anticipated future developments in more detail. The first type concerns nanochannel environments and their applications for electrodeposition and for electrochemical sensing. The second type covers the rather newly emerging field of colloidal single entity confinement in electrochemistry. In these contexts, we will for instance address the influence of confinement on the mass transport and electric field distributions and will link the associated changes in local species concentration or in the local driving force to altered reaction kinetics and product selectivity. Highlighting pioneering works and exciting recent developments, this educational review does not only aim at surveying and categorizing the state-of-the-art, but seeks to specifically point out future perspectives in the field of confinement-controlled electrochemistry.

Flow-electrochemical synthesis of Prussian Blue based nanozyme 'artificial peroxidase'

We report on fully electrochemical flow-through synthesis of Prussian Blue based nanozymes defeating peroxidase in terms of more than 200 times higher catalytic rate constant (k = 6 × 10⁴ s^-1). Being reagentless, reproducible, simple and scalable, the proposed approach blazes new trails for the electrosynthesis of functional conductive and electroactive nanomaterials.

Uniform arrays of gold nanoelectrodes with tuneable recess depth

Nanoelectrode arrays are much in demand in electroanalytical chemistry, electrocatalysis, and bioelectrochemistry. One of the promising approaches for the preparation of such systems is templated electrodeposition. In the present study, porous anodic alumina templates are used to prepare Au nanoelectrode arrays. Multistage electrodeposition is proposed for the formation of recessed electrodes with the ability to tune the distance between the surface of the porous template and the top surface of the nanoelectrodes. A set of complementary techniques, including chronoamperometry, coulometry, and scanning electron microscopy, are used to characterize the nanoelectrode arrays. The number of active nanoelectrodes is experimentally measured. The pathways to further improve the recessed nanoelectrode arrays based on anodic alumina templates are discussed.

Environment-induced overheating phenomena in Au-nanowire based Josephson junctions

Unlike conventional planar Josephson junctions, nanowire-based devices have a bridge geometry with a peculiar coupling to environment that can favor non-equilibrium electronic phenomena. Here we measure the influence of the electron bath overheating on critical current of several bridge-like junctions built on a single Au-nanowire. Using the Usadel theory and applying the two-fluid description for the normal and superconducting components of the flowing currents, we reveal and explain the mutual influence of the neighbouring junctions on their characteristics through various processes of the electron gas overheating. Our results provide additional ways to control nanowire-based superconducting devices.

Magnetic Properties of the Densely Packed Ultra-Long Ni Nanowires Encapsulated in Alumina Membrane

High-quality and compact arrays of Ni nanowires with a high ratio (up to 700) were obtained by DC electrochemical deposition into porous anodic alumina membranes with a distance between pores equal to 105 nm. The nanowire arrays were examined using scanning electron microscopy, X-ray diffraction analysis and vibration magnetometry at 300 K and 4.2 K. Microscopic and X-ray diffraction results showed that Ni nanowires are homogeneous, with smooth walls and mostly single-crystalline materials with a 220-oriented growth direction. The magnetic properties of the samples (coercivity and squareness) depend more on the length of the nanowires and the packing factor (the volume fraction of the nanowires in the membrane). It is shown that the dipolar interaction changes the demagnetizing field during a reversal magnetization of the Ni nanowires, and the general effective field of magnetostatic uniaxial shape anisotropy. The effect of magnetostatic interaction between ultra-long nanowires (with an aspect ratio of >500) in samples with a packing factor of ≥37% leads to a reversal magnetization state, in which a "curling"-type model of nanowire behavior is realized.

Bismuth nanowires: electrochemical fabrication, structural features, and transport properties

Electrochemical aspects of Bi electrocrystallization from a bath containing bismuth nitrate in a mixture of ethylene glycol and water are addressed. Bismuth nanowires with diameters of 50-120 nm and a length of up to a few dozen microns were prepared by electrodeposition into the pores of anodic aluminium oxide templates. Crystal structure and morphology of electrodeposited materials were characterized using electron microscopy, selected area electron diffraction, and X-ray diffraction analysis. Factors affecting the formation of single or polycrystalline nanowires and their crystallographic orientation are discussed. The prospects of electrodeposited Bi nanostructures for microelectronics are illustrated by the quantitative resistivity measurements of highly texturized Bi nanowires with a diameter of ca. 100 nm and a length varying from 160 to 990 nm in a temperature range from 300 to 1.2 K.

Anomalous magneto-resistance of Ni-nanowire/Nb hybrid system

We examine the influence of superconductivity on the magneto-transport properties of a ferromagnetic Ni nanowire connected to Nb electrodes. We show experimentally and confirm theoretically that the Nb/Ni interface plays an essential role in the electron transport through the device. Just below the superconducting transition, a strong inverse proximity effect from the nanowire suppresses superconducting correlations at Nb/Ni interfaces, resulting in a conventional anisotropic magneto-resistive response. At lower temperatures however, the Nb electrodes operate as superconducting shunts. As the result, the magneto-resistance exhibits a strongly growing hysteretic behavior accompanied by a series of saw-like jumps. The latter are associated with the penetration/escape of individual Abrikosov vortices that influence non-equilibrium processes at the Nb/Ni interface. These effects should be taken into account when designing superconducting quantum nano-hybrids involving ferromagnetic nanowires.

Applications, Surface Modification and Functionalization of Nickel Nanorods

The growing number of nanoparticle applications in science and industry is leading to increasingly complex nanostructures that fulfill certain tasks in a specific environment. Nickel nanorods already possess promising properties due to their magnetic behavior and their elongated shape. The relevance of this kind of nanorod in a complex measurement setting can be further improved by suitable surface modification and functionalization procedures, so that customized nanostructures for a specific application become available. In this review, we focus on nickel nanorods that are synthesized by electrodeposition into porous templates, as this is the most common type of nickel nanorod fabrication method. Moreover, it is a facile synthesis approach that can be easily established in a laboratory environment. Firstly, we will discuss possible applications of nickel nanorods ranging from data storage to catalysis, biosensing and cancer treatment. Secondly, we will focus on nickel nanorod surface modification strategies, which represent a crucial step for the successful application of nanorods in all medical and biological settings. Here, the immobilization of antibodies or peptides onto the nanorod surface adds another functionality in order to yield highly promising nanostructures.

Longitudinal pore alignment in anodic alumina films grown on polycrystalline metal substrates

A quantitative analysis of longitudinal pore alignment in anodic alumina films grown on polycrystalline metal substrates was performed on the basis of small-angle X-ray diffraction mapping. The very high sensitivity of the diffraction pattern to the orientation of the anodic alumina film allowed the average pore alignment within the irradiated area to be determined, with an accuracy better than 0.1°. It is shown that pores deviate from the orientation orthogonal to the metal surface by a small angle that is constant within a single-crystal grain. Strong correlation between the longitudinal pore alignment within the anodic alumina film and the grain structure of the aluminium substrate indicates the important role of the crystallographic orientation of the metal in the pore growth process.

Comparative study of structure and permeability of porous oxide films on aluminum obtained by single- and two-step anodization

A comparative study of the structure and transport properties of porous aluminum oxide films obtained by single- and two-step anodization was carried out. It is shown that the oxidation regime significantly affect the number of dead-ended channels, which results in more than twice the variation in membrane permeability. The effect is explained by multiple branching of channels on the initial stages of organization of the porous structure. Branching also occurs on later stages governing mass transport properties of porous anodic alumina films. A model describing transport properties of anodic aluminum oxide membranes based on pore branching on domain boundaries was suggested to fit experimental results of permeance of membranes obtained by both single- and two-step anodization.

Permeability of anodic alumina membranes with branched channels

Mass-transport properties of anodic alumina membranes exploited in a number of technological areas are strongly affected by the real pore structure and arrangement of channels that can split or terminate during the anodization process. This paper focuses on the investigation of pore branching and rearrangement caused by voltage variation in the course of the anodic oxidation of aluminum. Gas-transport measurements were utilized for the quantitative determination of an effective through porosity of multilayer anodic alumina membranes with branched channels obtained by variation of anodization voltage. It was shown that on decrease of anodization voltage a branching of pores occurs, while an increase of anodization voltage leads to the termination of some of the pores with an increase in the diameter of others. Gas permeance measurements combined with electron microscopy unambiguously prove dead-end pore formation on voltage increase, while no pore merging appears. This generally affects any mass-transport properties and applications of anodic alumina membranes as the delivery of any species (e.g. ions, gas molecules, etc) through the blocked channels is impossible.

Structural and magnetic characterization of batch-fabricated nickel encapsulated multi-walled carbon nanotubes

We report on the growth and fabrication of Ni-filled multi-walled carbon nanotubes (Ni-MWNTs) with an average diameter of 115 nm and variable length of 400 nm-1 µm. The Ni-MWNTs were grown using template-assisted electrodeposition and low pressure chemical vapor deposition (LPCVD) techniques. Anodized alumina oxide (AAO) templates were fabricated on Si using a current controlled process. This was followed by the electrodeposition of Ni nanowires (NWs) using galvanostatic pulsed current (PC) electrodeposition. Ni NWs served as the catalyst to grow Ni-MWNTs in an atmosphere of H2/C2H2 at a temperature of 700 °C. Time dependent depositions were carried out to understand the diffusion and growth mechanism of Ni-MWNTs. Characterization was carried out using scanning electron microscopy (SEM), focused ion beam (FIB) milling, transmission electron microscopy (TEM), Raman spectroscopy and energy dispersive x-ray spectroscopy (EDX). TEM analysis revealed that the Ni nanowires possess a fcc structure. To understand the effects of the electrodeposition parameters, and also the effects of the high temperatures encountered during MWNT growth on the magnetic properties of the Ni-MWNTs, vibrating sample magnetometer (VSM) measurements were performed. The template-based fabrication method is repeatable, efficient, enables batch fabrication and provides good control on the dimensions of the Ni-MWNTs.