Electrochemically assisted deposition of sol–gel bio-composite with co-immobilized dehydrogenase and diaphorase

Composite Silica-Based Films as Platforms for Electrochemical Sensors

Sol-gel-derived silica thin films generated onto electrode surfaces in the form of organic-inorganic hybrid coatings or other composite layers have found tremendous interest for being used as platforms for the development of electrochemical sensors and biosensors. After a brief description of the strategies applied to prepare such materials, and their interest as electrode modifier, this review will summarize the major advances made so far with composite silica-based films in electroanalysis. It will primarily focus on electrochemical sensors involving both non-ordered composite films and vertically oriented mesoporous membranes, the biosensors exploiting the concept of sol-gel bioencapsulation on electrode, the spectroelectrochemical sensors, and some others.

Sol-gel Approaches for Elaboration of Polyol Dehydrogenase-Based Bioelectrodes

This review describes the input of sol-gel chemistry to the immobilization of polyol dehydrogenases on electrodes, for applications in bioelectrocatalysis. The polyol dehydrogenases are described and their application for biosensing, biofuel cell and electrosynthesis are briefly discussed. The immobilization of proteins via sol-gel approaches is described, including a discussion on the difficulty to maintain the activity of proteins in a silica matrix and the strategies developed to offer a proper environment to the proteins by developing optimal organic-inorganic hybrid materials. Finally, the co-immobilization of the NAD + co-factor and of mediators for the elaboration of reagentless devices is presented, based on published and original data. All-in-all, sol-gel approaches appear to be a very promising for development of original electrochemical applications involving dehydrogenases in near future.

Preparation of aqueous sol-gel silica and titania multi-layered thin films and their evaluation as biomolecular encapsulation hosts

Multi-layered silica and titania thin films were prepared via an aqueous sol-gel route. The titania layers could efficiently entrap anti-HRP antibodies and showed increase in stability upon ageing, up to 2 months. Specific activity of the entrapped antibodies could be monitored in a reliable manner over one week. The silica films showed lower performances, as a probable consequence of large pore size. Increase in the titania precursor (TiBALDH) concentration and addition of glycerol allowed the design of tri-enzymatic multi-layered systems for the detection of lactose. The multilayer approach showed higher robustness than the co-immobilization of the enzymes in a single layer. This process is simple, solvent-free and flexible, opening the route to multi-biofunctional materials at the nanoscale.

Reagentless D-sorbitol biosensor based on D-sorbitol dehydrogenase immobilized in a sol-gel carbon nanotubes-poly(methylene green) composite

A reagentless D-sorbitol biosensor based on NAD-dependent D-sorbitol dehydrogenase (DSDH) immobilized in a sol-gel carbon nanotubes-poly(methylene green) composite has been developed. It was prepared by durably immobilizing the NAD(+) cofactor with DSDH in a sol-gel thin film on the surface of carbon nanotubes functionalized with poly(methylene green). This device enables selective determination of D-sorbitol at 0.2 V with a sensitivity of 8.7 μA mmol(-1) L cm(-2) and a detection limit of 0.11 mmol L(-1). Moreover, this biosensor has excellent operational stability upon continuous use in hydrodynamic conditions.

Site selective generation of sol-gel deposits in layered bimetallic macroporous electrode architectures

The elaboration of an original composite bimetallic macroporous electrode containing a site-selective sol-gel deposit is reported. Regular colloidal crystals, obtained by a modified Langmuir-Blodgett approach, are used as templates for the electrogeneration of the desired metals in the form of a well-defined layered bimetallic porous electrode. This porous matrix shows a spatially modulated electroactivity which is subsequently used as a strategy for targeted electrogeneration of a sol-gel deposit, exclusively in one predefined part of the porous electrode.

Durable cofactor immobilization in sol-gel bio-composite thin films for reagentless biosensors and bioreactors using dehydrogenases

A new strategy directed to the durable immobilization of NAD(+)/NADH cofactors has been tested, along with a suitable redox mediator (ferrocene), in biocompatible sol-gel matrices encapsulating a bi-enzymatic system (a dehydrogenase and a diaphorase, this latter being useful to the safe regeneration of the cofactor), which were deposited as thin films onto glassy carbon electrode surfaces. It involves the chemical attachment of NAD(+) to the silica matrix using glycidoxypropylsilane in the course of the sol-gel process (in smooth chemical conditions). This approach based on chemical bonding of the cofactor (which was checked by infrared spectroscopy) led to good performances in terms of long-term stability of the electrochemical response. The possibility to integrate all components (proteins, cofactor, mediator) in the sol-gel layer in an active and durable form gave rise to reagentless devices with extended operational stability (i.e. high amperometric response maintained for more than 12h of continuous use under constant potential, whereas the signal completely vanished within the first few minutes of working with non-covalently bonded NAD(+)). To confirm the wide applicability of the proposed approach, the same strategy has been applied to the elaboration of biosensors for D-sorbitol, D-glucose and L-lactate with using D-sorbitol dehydrogenase, D-glucose dehydrogenase and L-lactate dehydrogenase respectively. The analytical characteristics of the glucose sensors are given and compared to previous approaches described in the literature for the elaboration of reagentless biosensors.

Multiscale-tailored bioelectrode surfaces for optimized catalytic conversion efficiency

We describe the elaboration of a multiscale-tailored bioelectrocatalytic system. The combination of two enzymes, D-sorbitol dehydrogenase and diaphorase, is studied with respect to the oxidation of D-sorbitol as a model system. The biomolecules are immobilized in an electrodeposited paint (EDP) layer. Reproducible and efficient catalysis of D-sorbitol oxidation is recorded when this system is immobilized on a gold electrode modified by a self-assembled monolayer of 4-carboxy-(2,5,7-trinitro-9-fluorenylidene)malonitrile used as a mediator. The insertion of mediator-modified gold nanoparticles into the EDP film increases significantly the active surface area for the catalytic reaction, which can be further enhanced when the whole system is immobilized in macroporous gold electrodes. This multiscale architecture finally leads to a catalytic device with optimized efficiency for potential use in biosensors, bioelectrosynthesis, and biofuel cells.